I can't connecting with my mail server
Hi,
I have an ipod touch 4g. And since two weeks every time I want to check my mail's and open the normal mail app from apple is there standing 'no connecting with the server please try it later again' and then when i try it later the same thing apeared. What can I do, because it's very important for me to check my mails from my ipod and to sent some.
Please Help me. Thanks befor
Can you access the account from other devices?
Does Safari work?
Have you tried when connected to another wifi network?
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Similar Messages
-
Just hooked up my Apple tv. Got Netflix and other apps to work, but when I use the radio app, it tells me it can't connect to the default server. What should I do?
Anybody? Just installed my new ATV and everytime I go select a radio station it spins and spins and spins - then when I go back to th emenu and then back into the radio to try again I get "Could not connect to "DEFAULT_SERVER" seems pretty specific!? I had no such problems with my ATV v1 I just ebayed!!
PS. I am logged in with correct ID and can acces pretty much everything else -
It downloads everything, but when I re-start, it can not connect to the download server.
I've left it open and it never connects.Your UserAgent indicates that you used Firefox 3.6.17 to post here. <br />
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-GB; rv:1.9.2.17) Gecko/20110420 Firefox/3.6.17
What does it say about the version of Firefox you have in '''Help > About Firefox'''?
If it says Firefox 4.0 or 4.0.1, see if this helps you: <br />
https://support.mozilla.com/en-US/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser -
DNSreport says it can't connect to my mail server...although the mail works
When I run a test on my virtual domain at www.dnsreport.com I get the following FAILURE:
======
ERROR: I could not complete a connection to any of your mailservers!
mail.thermal3p.com: Timed out [Last data sent: RCPT TO: ]
If this is a timeout problem, note that the DNS report only waits about 40 seconds for responses, so your mail may work fine in this case but you will need to use testing tools specifically designed for such situations to be certain.
======
Mail is being received and sent via the virtualmailhost with only one known problem which is the reason I ran the report - one server keeps bouncing my outbound messages back with this vague error:
<[email protected]>: host
INBOUND.FILTER.THEPLANET.com[216.185.111.115] said: 550 Denied. S1 (in reply to RCPT TO command)
Here is the full report on my virtual domain:
http://www.dnsreport.com/tools/dnsreport.ch?domain=thermal3p.com
It would help if I could just narrow down wether it is a DNS record problem or a server setup problem. To me the server seems to be fine, but I also can't figure out what I've done wrong in the DNS setup. DNS records are hosted at GoDaddy.
THANKS,
KeithYour mail server is answering, but isn't answering
with its MX name in the DNS record:
Can I tell if that is a DNS issue or a Server issue?
It's your choice. Depends on what you want the mail server's name to be. One option would be to change your MX record in your DNS zone file so that the MX host name matches the name announced by your server. Another option would be to change the name announced by your server to match the MX record in your DNS zone file.
Reverse DNS is wrong (some servers won't accept
email from you unless reverse DNS matches the
HELO/EHLO name):
I believe this is why the one server is bouncing me.
The IT told me to check that. Now the problem is
that I don't know how to fix it.
That's why I posted the entire response for your reverse DNS query. Here it is again:
; <<>> DiG 9.3.2 <<>> -x 71.154.29.157 ptr
;; global options: printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 5937
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 2, ADDITIONAL: 0
;; QUESTION SECTION:
;157.29.154.71.in-addr.arpa. IN PTR
;; ANSWER SECTION:
157.29.154.71.in-addr.arpa. 7200 IN PTR adsl-71-154-29-157.dsl.rcsntx.sbcglobal.net.
;; AUTHORITY SECTION:
29.154.71.in-addr.arpa. 172800 IN NS ns1.pbi.net.
29.154.71.in-addr.arpa. 172800 IN NS ns2.pbi.net.</div>
The "Authority" for the 29.154.71.in-addr.arpa. subdomain are the nameservers at pbi.net. The person responsible for that nameserver needs to change the PTR record for 157.29.154.71.in-addr.arpa. from adsl-71-154-29-157.dsl.rcsntx.sbcglobal.net. to the name announced by your server (see above, first get the announced name to match your MX record).
Do you think I should be talking to my service
provider (sbcglobal.net) or the DNS host (godaddy) or
Myself (the hack that is responsible for setting up
the server)?
If you start talking to yourself, people wonder. Your service provider (sbcglobal.net) is the one that has to handle this.
Russ
Xserve G5 2.0 GHz 2 GB RAM Mac OS X (10.4.8) Apple Hardware RAID, ATTO UL4D, Exabyte VXA-2 1x10 1u -
UTL_SMTP: can't connect to remote mail server (error: 421)
I'm trying to execute this command as SYS:
exec MYSCHEMA.send_mail_via_utl_smtp('[email protected]', '[email protected]', 'my subject', 'my message','mail.mydomain.com');
and I get this error:
Error starting at line 8 in command:
exec MYSCHEMA.send_mail_via_utl_smtp('[email protected]', '[email protected]', 'my subject', 'my message','mail.mydomain.com');
Error report:
ORA-29278: SMTP transient error: 421 Service not available
ORA-06512: at "SYS.UTL_SMTP", line 29
ORA-06512: at "SYS.UTL_SMTP", line 108
ORA-06512: at "SYS.UTL_SMTP", line 150
ORA-06512: at "MYSCHEMA.SEND_MAIL_VIA_UTL_SMTP", line 17
ORA-06512: at line 1
29278. 00000 - "SMTP transient error: %s"
*Cause: A SMTP transient error occurred.
*Action: Correct the error and retry the SMTP operation.
However, I can telnet successfully as root user to mail.mydomain.com. The stored procedure is:
create or replace
PROCEDURE send_mail_via_utl_smtp(
sender IN VARCHAR2,
recipient IN VARCHAR2,
subject IN VARCHAR2 DEFAULT NULL,
message IN VARCHAR2,
mailhost IN VARCHAR2 DEFAULT 'mailhost'
AS
mail_conn UTL_SMTP.connection;
crlf CONSTANT VARCHAR2(2) := CHR(13) || CHR(10);
smtp_tcpip_port CONSTANT PLS_INTEGER := 25;
BEGIN
mail_conn := UTL_SMTP.OPEN_CONNECTION(mailhost, smtp_tcpip_port);
UTL_SMTP.HELO(mail_conn, mailhost);
UTL_SMTP.MAIL(mail_conn, sender);
UTL_SMTP.RCPT(mail_conn, recipient);
UTL_SMTP.DATA(mail_conn, SUBSTR(
'Date: ' || TO_CHAR(SYSTIMESTAMP, 'Dy, dd Mon YYYY HH24:MI:SS TZHTZM') || crlf
|| 'From: ' || sender || crlf
|| 'Subject: ' || subject || crlf
|| 'To: ' || recipient || crlf
|| message,
1, 32767));
UTL_SMTP.QUIT(mail_conn);
END send_mail_via_utl_smtp;
Note that mail.mydomain.com is sitting on the application server, and not the database server (not sure if that is important here). Previously, I set things up doing the following as SYS user:
# cd $ORACLE_HOME/rdbms/admin
# sqlplus / as sysdba
SQL> @utlmail.sql;
Package created.
Synonym created.
SQL> @prvtmail.plb;
Package created.
Package body created.
Grant succeeded.
Package body created.
No errors.
SQL> ALTER SYSTEM SET smtp_out_server = "mail.mydomain.com" SCOPE=MEMORY;
System altered.
SQL> show parameter smtp_out_server
NAME TYPE VALUE
============
smtp_out_server string mail.mydomain.com
SQL> exec DBMS_NETWORK_ACL_ADMIN.CREATE_ACL('my_acl_email.xml','for my db acl to send email', 'MYSCHEMA', TRUE, 'connect');
PL/SQL procedure successfully completed.
SQL> exec DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL('my_acl_email.xml','mail.mydomain.com', 25, NULL);
PL/SQL procedure successfully completed.
It appears that the SYS user is permitted by the ACL, but is somehow blocked access to mail.mydomain.com on the application server. Are there any Linux configurations that need to occur in implementing this process? Or, am I missing something in configuring Oracle. I'm using 11.2.0.1.0. This is my first time setting this up. Does the database need to be cycled down then back up for any of these settings to take place?
Edited by: tem on Apr 20, 2012 2:45 PMThanks Justin, that helps a lot. Now, with the 'AUTH LOGIN' command, I'm getting the error:
ORA-29279: SMTP permanent error: 503 AUTH command used when not advertised
ORA-06512: at "SYS.UTL_SMTP", line 29
ORA-06512: at "SYS.UTL_SMTP", line 110
ORA-06512: at "SYS.UTL_SMTP", line 170
ORA-06512: at "JCLOCKGEN.SEND_MAIL_VIA_UTL_SMTP", line 22
ORA-06512: at line 1
29279. 00000 - "SMTP permanent error: %s"
*Cause: A SMTP permanent error occurred.
*Action: Correct the error and retry the SMTP operation.
UPDATE:
Actually, my procedure above uses this line:
UTL_SMTP.HELO(mail_conn, mailhost);
But I noticed Justin's code above uses:
UTL_SMTP.EHLO(mail_conn, mailhost);
When I change the HELO to EHLO, everything works fine. Here's the final code:
create or replace
PROCEDURE send_mail_via_utl_smtp(
sender IN VARCHAR2,
recipient IN VARCHAR2,
subject IN VARCHAR2 DEFAULT NULL,
message IN VARCHAR2,
mailhost IN VARCHAR2 DEFAULT 'mailhost',
auth_username IN VARCHAR2,
auth_password IN VARCHAR2
AS
mail_conn UTL_SMTP.connection;
crlf CONSTANT VARCHAR2(2) := CHR(13) || CHR(10);
smtp_tcpip_port CONSTANT PLS_INTEGER := 25;
BEGIN
mail_conn := UTL_SMTP.OPEN_CONNECTION(mailhost, smtp_tcpip_port);
UTL_SMTP.EHLO(mail_conn, mailhost);
--------------BEGIN AUTHENTICATION--------------
UTL_SMTP.command(mail_conn, 'AUTH LOGIN');
utl_smtp.command(mail_conn, utl_raw.cast_to_varchar2(utl_encode.base64_encode( utl_raw.cast_to_raw(auth_username))));
utl_smtp.command(mail_conn, utl_raw.cast_to_varchar2(utl_encode.base64_encode( utl_raw.cast_to_raw(auth_password))));
--------------END AUTHENTICATION--------------
UTL_SMTP.MAIL(mail_conn, sender);
UTL_SMTP.RCPT(mail_conn, recipient);
UTL_SMTP.DATA(mail_conn, SUBSTR(
'Date: ' || TO_CHAR(SYSTIMESTAMP, 'Dy, dd Mon YYYY HH24:MI:SS TZHTZM') || crlf
|| 'From: ' || sender || crlf
|| 'Subject: ' || subject || crlf
|| 'To: ' || recipient || crlf
|| message,
1, 32767));
UTL_SMTP.QUIT(mail_conn);
END send_mail_via_utl_smtp;
Edited by: tem on Apr 20, 2012 5:55 PM -
Can't connect with software update server
need help .....
I've been struggeling recently with getting updates done in the Mac App Store, roughly since the Mavericks update. Everytime there is a new update available, the Mac App Store can't seem to find it, I get this error everytime I click on the Update tab: An error has occured: Not able to reach Apple server.
i alredy boot in safe mode but it still not working ....
this my app store log...
Oct 7 23:28:14 one-international.local storeagent[274] <Critical>: UpdateController: update scan completed
Oct 7 23:28:14 one-international.local storeagent[274] <Critical>: UpdateController: _availableUpdatesDidChange removing all updates available notifications because the badge count is 0
Oct 7 23:28:14 --- last message repeated 1 time ---
Oct 7 23:28:14 one-international.local storeagent[274] <Critical>: UpdateQueue: Setting hasBeenSeenByUser for all updates
Oct 7 23:28:16 one-international.local App Store[444] <Critical>: FRStoreViewController: Discarded delayed initial load of updates because the view has already commited an initial load
Oct 7 23:28:16 one-international.local App Store[444] <Critical>: FRStoreViewController: Discarded delayed initial load of purchased because the view has already commited an initial load
Oct 7 23:28:16 one-international.local App Store[444] <Critical>: FRStoreViewController: Discarded delayed initial load of top-charts because the view has already commited an initial load
Oct 7 23:28:16 one-international.local App Store[444] <Critical>: FRStoreViewController: Discarded delayed initial load of genres because the view has already commited an initial load
Oct 7 23:28:17 one-international.local storeagent[274] <Critical>: UpdateController: Starting SoftwareUpdate scan with forceFullScan=0 launchedFromNotification=0
Oct 7 23:28:17 one-international.local storeagent[274] <Critical>: UpdateQueue: Using available-software-updates-extended key for update queue
Oct 7 23:28:17 one-international.local storeagent[274] <Critical>: UpdateController update scan progress at -1.000000
Oct 7 23:28:17 one-international.local storeagent[274] <Critical>: ISStoreURLOperation: Starting URL operation with url=(null) / bagKey=available-software-updates-extended
Oct 7 23:28:17 one-international.local storeagent[274] <Critical>: -[ISStoreURLOperation _runURLOperation]: _addStandardQueryParametersForURL: https://su.itunes.apple.com/WebObjects/MZSoftwareUpdate.woa/wa/availableSoftware UpdatesExtended
Oct 7 23:28:17 one-international.local storeagent[274] <Critical>: UpdateController: update scan completed
Oct 7 23:28:17 one-international.local storeagent[274] <Critical>: UpdateController: _availableUpdatesDidChange removing all updates available notifications because the badge count is 0
Oct 7 23:28:17 --- last message repeated 1 time ---
Oct 7 23:28:17 one-international.local storeagent[274] <Critical>: UpdateQueue: Setting hasBeenSeenByUser for all updatesYou've installed some kind of malware.
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" '/S*/*/Ca*/*xpc* >&- ||echo No' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors XPC\ cache );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 50 32 52;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
HT1277 Multiple accounts on same domain in Apple Mail blocks connection to the mail server.
I am trying to run two separate mail accounts on my Mac in Apple Mail, both using the same domain name. I don't want to use aliases because one is a personal mail account and the other is a helpdesk one, with different signatures. I also want to keep emails for those accounts separate.
I can get the first account working fine. When I add the second account, Apple Mail tells me it can't connect to the mail server for either account. As soon as I remove the second account, the first account starts working again.
Anyone know why this might be?
The mail server is Postfix running on a Linux server. My Mac is running OS X Lion v10.7.5.
The mail accounts are IMAP - I also access them from my iPhone 3GS (iOS 6). Again, I can get the first one working from the iPhone, but as soon as I add the second one it falls over.If the email service you were trying to connect to was an icloud email account, then the outgoing server can't possibly be right (yahoo.com???). If it's to yahoo, then the "apple.smtp.mail" part certainly looks suspicious. Are you sure the server address wasn't changed at some point?
So the first question for you is.. which email service were you trying to use? Yahoo or icloud (or something else)? -
Text limits to the "Question" link prevents a full explanation:
This is a long-time problem. I have tried to resolve it with Apple but their "Customer Support" is merely a name.
I can go online and access my e-mail but when I try to send or receive e-mail via iCloud through my internet server (Google fiber now but the same situation existed with my prior service), I receive "There may be a problem with the mail server or network. Verify the settings for 'Apple Email' and try again.
"The server returned the error: The server 'p0-imap.mail.me.com' refused to allow a connection on port 143."
Well, I have verified the setting and tried again and again and …
Well, you get the idea …JungleTaxi Cabbie wrote:
Csound1: iCloud: Configuring Mail with Mac OS X v10.6 or iOS 4
Enter your Incoming Mail Server, User Name, and Password using the following settings:
Incoming Mail Server: mail.me.com
User Name: Your iCloud email address (excluding @me.com)
Password: Your password
Last Modified: Jun 27, 2013
Maybe you should test these things before calling people out, because these settings do function perfectly well.
iCloud is not supported on Snow Leopard or lower, why bother to mention it?
The OP has an iCloud account, and that can not be opened without Lion or Mountain Lion (on a Mac), IOS5 or 6 (on an iPhone/iPad)
The document I linked to is Apples documentation for iCloud on current devices,I don't care whether you believe that you know better than they do, but it will affect the people who follow your advice as it won't work
JungleTaxi Cabbie wrote:
Also, if you're not running Lion or Mountain Lion, there is no "Mail, Contacts & Calendars" prefpane.
I never said that there was, perhaps you imagined it. -
I can't set up gmail in my iPad 2. Keep on saying ' can't connect with SSL and ask me whether to connect without using SSL, then I press 'yes' and it said again IMAP is not working and tell me to see network connection and incoming mail server. No idea how to do anymore. Already tried to figure out. But not work. Can anyone pls help me?
Nope, doesn't pass verification. I get the spinner for a minute or so, then the alert about setting it up without SSL. Are you suggesting I disable Fetch and Push BEFORE I enter the account details? Because I never get past the account details screen, unless I choose "Set up without SSL" after the warning.
-
I cannot open my Yahoo Mail but everything else is OK. When I click Yahoo Mail Icon, I get this error message "Safari Cannot open this page. Safari can not establish secure connection with Yahoo Mail.
It sounds as though a script on the site, or an advertisement, is not working quite right...
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
(You also can clear Firefox's cache completely using:
orange Firefox button ''or'' Tools menu > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now")
(2) Remove the site's cookies using either of these. Save any pending work first.
While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
Then try reloading the page. Does that help? -
MacBook Pro, late 2011 version. Up to date Mountain Lion.
My email account in the Mail.app is set up as IMAP, but when I delete emails in the Mac Mail App, they are not deleted from the mail clients of the other devices that are connected to the mail server with IMAP. IMAP works perfectly between Windows Outlook 2010, iPad Mail App and Android default mail client. Deleted messages behave correctly, as in delete from one device and the mail is deleted from all devices.
Having just tested in reverse order on the Mac; emails deleted from the email client on Windows, iPad and Android are not deleted in the Mac Mail App. It appears that the account is behaving like POP rather than IMAP.
Any advice on how to have IMAP work correctly on the MacBook Pro Mail.app?
Thank you.Hi Csound1, thanks. The email host is 1and1.co.uk, however, i am going to fess up and make myself look like a plonker now -
the email account in question was set up in Outlook as POP - stupid, stupid, stupid me, wasted an afternoon on this! I have now changed the Outlook account to IMAP and Mail.app works perfectly - and looks much nicer than Outlook did. Im in the middle of converting from Windows to a Mac, and still finding my way around the Mac
The lesson learned, never assume - always double check! All my other email addresses with 1and1 are all imap, except this one, and it happened to be the first one I set up in the Mail.app. (bows head in disgrace!)
Thank you anyway for attempting to help me!
Cheers -
I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?
Please quote the exact error message, word-for-word, verbatim.
What is your operating system?
What version of Lightroom? -
Hi there I am having trouble with my outlook express this is the first time it has happened it keeps telling me can't connect to the SMTP server and every password I have tried is incorrect this is for 'iCloud' very frustrating as all our phones are ok
Well I am feeling a bit silly now because that was all I had to do. In the past Workgroup Manager had always opened right up to the list of my users, I never even thought to click on that but apparently that was all that was needed.
I still am not sure how the iChat Server preferences changed themselves on me, but it is not the first time I have had weird "settings" issues with our Snow Leopard Server.
Thanks! -
i bought itunes match yesterday and i can not connect with the server. Error 4010 appear every tiem when i want to entry on itunes match.
ThanksHere are some things to try:
Close itunes
Check your internet settings.
Control Panel – Internet Options – Advanced
Check SSL 3.0 and TLS 1.0
Uncheck “Check for server certificate revocation (requires restart)”
Click Apply
Click Okay
Open itunes and try again
And, you don't need to turn off the firewall, just add itunes and itunes helper to your security software firewall. -
Lightroom 5 email can't connect with outgoing server?
Getting message not connecting to outgoing mail server, how can I direct LR5 to correct server?
You're in the wrong forum.
Please try the Lightroom forum.
Maybe you are looking for
-
I would like to know the version or name of SAP that is implemented in real
I would like to know the version or name of SAP that is implemented in real time?
-
So recently I installed Flavours, its an application that changes the appearance of Finders windows, all that jazz. I uninstalled it and reverted back to regular looking Finder. Signed out and logged back in, now nothing opens. Spotify, Chrome, Steam
-
Hi All, I am have an interview scheduled for FI/CO production support job, but I have never assumed the responsibility till date. I know about ticketing process and real-time issues, but for interview sake what areas do I need to brush up? Month-end
-
Contract Item System Status (Most recent system status)
Hello folks, I am trying to extract Contract Item level System statuses by going through STATUS tab>SYSTEM STATUS area>STATUS ANALYSIS log icon>TRANSACTION ANALYSIS which are available in tables CRM_JSTO,CRM_JEST, and CRM_JCDS. However, I would like
-
Windows won't show up on start up
Hi, I finally managed to get boot camp working and save an Windows .ios file to my samsung 3.0 Hardrive however when I press alt on the start up only the macintosh HD and the recovery disk shows up. I dont think it's a problem with the ios file itsel