I can't create addfitional windows with cmd-N-they're "invisible".

OS X 10.6.6, '''''dual monitor config''''' on a Mac mini (3,1) from 2010. Just got FF4.
Steps to show buglet (not checked on a single display Mac—you must try with above config, also running "Spaces"):
If running FF 3 with “remember windows from last session”, close all windows, then quit FF 3, then relaunch FF3 to confirm it opens only the home page. Close that window and quit FF 3.
Install FF4.
Launch FF4. Close whatever welcome window appears.
Open a new window with cmd-N.
Repeat the previous step. As many times as desired.
All the new windows are listed in the Window menu, but are not selectable in the menu. Similarly, pulling a new tab out to sprout a new window makes the tab vanish. Again, the Window menu reports the existence of the “pulled-off” window, but the window itself is not accessible.

Well, FF 3.0.1 was released, and this buglet lives on. Waiting for the next rev.

Similar Messages

How can I create a video with effects using my ipad?

How can I create a video with effects (sepia, B&W, Negative, oval or any other shape borders) using my ipad? I would Like to keep a higher res and also be able to shrink it down to email or send in a MMS. Or should I just upload it to my PC and mess with it there? Some of the apps I have are very easy to use compared to the learning curve needed for video editing software.
Thanks

Thats the Problem . . . how many apps do I have to try until I find the one I want? I noticed a few will render the video thus losing its original size. When I went to edit it more in iMovie the video was smaller--not good. And what software do you suggest, Templeton, for the PC? I love the apps because they are easy. I dont have hours to mess around on a software to figure out if its something I want. Im looking for simplicity. Maybe Ill get more into it later. I just want to record simple video of my playing the guitar for self analysis and create a short video for family and friends.
Apps:
iMovie
CinemaFXV
VideoFix
Cartoonatic
Video illusion
VidEditor
Software:
Windows Movie maker (wont accept .mov files)
After Effects (Too little time, so much to learn)
Wondershare (Very easy but little choices)
VideoPad (Again. Few choices)

Can we create a window in a window?

hi friends,
i am designinf a form.Can we create a window in window .I want in a window there is abox like thing hw to design that box .
please help me out.
Edited by: tumma vandana on May 14, 2008 5:49 PM

1. /: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
2. /: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
3. /: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
BOX
Syntax:
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each parameter (XPOS, YPOS, WIDTH, HEIGHT and FRAME), both a measurement and a unit of measure must be specified. The INTENSITY parameter should be entered as a percentage between 0 and 100.
XPOS, YPOS: Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
WIDTH: Width of the box.
Default: WIDTH value of the SIZE command.
HEIGHT: Height of the box.
Default: HEIGHT value of the SIZE command.
FRAME: Thickness of frame.
Default: 0 (no frame).
INTENSITY: Grayscale of box contents as %.
Default: 100 (full black)
/: BOX INTENSITY 10
Fills the window background with shadowing having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.

Can we create a structure with string type not char??

Hi All
Can we create a structure with type STRING not as a CHAR type??
Please its urgent.
Regards
Deepanker

HI,
Yes, you can string instead of CHAR.
Please follow the steps below :
SE11 --> Table name --> Create Button --> And input the short description and necessary Delivery and Maintenance fields --> Select Fields tab --> Input some name on field --> And Click on Predefined button --> Press F4 on Data type column --> a Pop window will be displayed --> Select String from that.
Thanks,
Sriram Ponna.

I'm a new Mac user....how can i create a "sticky" with automatically reoccurring bullet points?

I'm a new Mac user....how can i create a "sticky" with automatically reoccurring bullet points?

On my previous Mac (long, sad story) I had Office for Mac and liked it a lot. I was collaberating on some fairly complex legal documents, and never noticed any compatibility problems with Windows Office. That said, it is expensive. For most documents, I simply open the Word document in Pages and export it to Word when I am finished. I sometimes get the message that there is a missing font, but the computer uses a substitute that is quite acceptable. I have never had someone say that they had difficulty with a document I exported to Word.
Numbers and Excel aren't as compatible in my experience, and I have gotten some surprises when I hadn't tweaked the settings properly when exporting to Excel.
The other component of iWork is Keynote, and I like it much better than Powerpoint; to me it is just easier to use. I have never tried converting back and forth between Keynote and Powerpoint.
Depending on what grade your kids are in and what they are doing, I think I would start off with iWork and see what, if any, problems they encounter. Of course, if they are going to use the computer for a class in Office or its components, your kids are going to need a Windows machine with Windows Office, because Office for Mac is enough different that when the teacher says, "Now, move your mouse here and click on....", your kids are going to be lost.
Hope this is useful.

How can i create excel sheet with multiple tabs using utl file?

how can i create excel sheet with multiple tabs using utl file?
any one help me?

Jaggy,
I gave you the most suitable answer on your own thread yesterday
Re: How to Generating Excel workbook with multiple worksheets

How can I create a solution with Livecycle

I work for a high school and we have about 12 pdfs that we need parents to read/scroll through, then 10 (different) pages that we want them to print, complete and return to the school. Finally, we want them to see a "Thank you, you have done all you have to do" type screen. We want to make it as user friendly as possible so I was thinking...
Reading pages, 1 at a time with next at bottom.
Click next and it takes them on. When they get to printing pages 1 print button prints all pages we need them to print. Click next, and it takes them to optional print pages.
Click next and it says, thank you.
How can I make this happen if I already have all the pdfs?
Help please.
John Dent
[email protected]

Thank you soo much. A few questions?
They weren't created in designer but could I just import all of them?
How do "build the structure" for the naviagtion?
Where/how do you add the script.
Thanks again,
John Dent
Date: Fri, 30 Jul 2010 07:01:08 -0600
From: [email protected]
To: [email protected]
Subject: How can I create a solution with Livecycle
I assume that all of these PDFs were created in Designer. If so you can add any buttons that you want to appear on every page (Next, Previous) onto the Master page then there is script you can add to the buttons to actual move the pages (xfa.host.pageDown() and xfa.host.pageUp()). The Prin button can be added to the specific page and you can pass the page numbers that you want to print as a parameter to the print command. Lastly when you get to the last page and the click Complete you can display a messageBox with your Thank you message.
Hope that helps
Paul
>

How can I create a query with tables in INFOSET?

Dear Gurus,
How can I create a query with tables in INFOSET?
Just tables and fields INFOSET?
Kind Regards,

Hello
Check following SCN Article for your understanding/reference:
- [Using Infoset Query ,SAP Query and Quick Viewer|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10eab7af-0e54-2c10-28a5-87b47adbe1a5]
Regards
JP

How can I create a query with web service data control?

I need to create a query with web service data control, in WSDL, it's query operation, there is a parameter message with the possible query criteria and a return message contains the results. I googled, but cannot find anything on the query with web service. I cannot find a "Named Criteria" in web service data control like normal data control. In Shay's blog, I saw the topics on update with web service data control. How can I create a query with web service data control? Thanks.

Hi,
This might help
*054. Search form using ADF WS Data Control and Complex input types*
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/index-101235.html

How can i create a button with a dynamic picture?

How can i create a button with a dynamic picture using
mcLoader.loadClip
I did create one with it doesnt seem to be working. It loses
all its
functions (eg onPress onRelease)
Thanks

I solved thep roblem anyway creating a mc.. then creating
another MC withing
the first MC and i change the picture on the second MC. And i
apply the
propierities to the first MC , and works
If i have troubles with mu sistem on the future I will use
yours!
Thanks!
"the fleece" <[email protected]>
escribi� en el mensaje
news:e67i88$jlf$[email protected]..
> the image loading will remove any properties or
functions the mc had.
>
> you need to apply them in the onLoadInit function
>
> mclListener.onLoadInit = function(target_mc:MovieClip) {
> target_mc.onRollOver=blah blah
> };
> var image_mcl:MovieClipLoader = new MovieClipLoader();
> image_mcl.addListener(mclListener);
> image_mcl.loadClip(blah, blahblah);
>
>

HOW CAN I CREATE A GROUP WITH MY CONTACTS FOR TEXTING

HOW CAN I CREATE A GROUP WITH MY CONTACTS FOR TEXTING

Olga, this is not a default feature in iPhone. You need a 3rd party application. I have created a free one, Easy Group, for group texting and group emailing.
http://itunes.apple.com/fr/app/easy-group/id461469079?mt=8
Rémi
Note: I may receive some form of compensation, financial or otherwise,from my recommendation or link.

Can I Create A Hotspot With My iPhone 4 To Use For iPod Touch?

I'm considering signing up for the tethering plan with AT&T.
My main purpose would be to create a hotspot for my iPod Touch.
I use my iPod Touch at work using Keynote. I would like the ability to download my Keynotes via Dropbox on my iPod Touch.
Can I create a hotspot with my iPhone 4 so my iPod touch would have access to the internet?

Yes.

Can we create outbound delivery with reference of purchase order

Hi All,
can we create outbound delivery with reference of purchase order?

dear friend,
as far as i know you can create it with the following references:
-to sales order;
-to STO;
-to subcontract order;
-to project;
-without any ref
are you talking about stock transport order ?
regards,

How can you create a playlist with music and music video and play those from same playlist through Apple TV?

How can you create a playlist on Ipod touch with music and music video, and play those from same playlist through Apple TV? I can download, create a playlist with both music and music video, stream that through the Apple TV with no problem. The sound and the information show up on the TV, but when it gets to a music video, it only shows the information and "artwork".
I also have a video playlist - videos play fine through the Apple TV, but will not shuffle through all videos - continues to repeat the same one. I have most definitely selected shuffle in both locations - from the playlist and on the ipod video screen while video is playing.

I finally got it... had to sync the photos with the music in iMovie, arrange the voiceover in GarageBand then export to iTunes, and then I was able to put it all together in iMovie and burn in iDVD... had a few glitches along the way but finally finished : )
Message was edited by: jpewald

Hi. I want to build a GUI based on several windows appearing following a certain sequence. How can i create different windows in the same VI? Also, i want the front panel of a subvi to appear when i run, how can i enable this.Thanks

Having several windows appear ...

Hi,
You can't create several windows for one VI. But you can use the "Tab Control" and change tab's in the program. Or you can use sub VI's and show ther front panels.
To show the front panel of a sub VI you have to open the VI you want to show and select "File->VI Properties". In the VI Properties window select Category "Window Appearance" and click Customize...
In the Customize Window Appearence window, here you can set a number of attributes for how the window will appear, select "Show front panel when called" and "Close afterwards if originally closed" click OK and OK and save the VI, done.
Now the VI front panel will appear then you use it as a sub VI.
/Thomas

I can't create addfitional windows with cmd-N-they're "invisible".

Similar Messages

Maybe you are looking for