I can't create PDF files from DWF files

I'm looking for a solution for creating PDF files from DWF files. When I attempt to create a DWF file to PDF, the file has problems being created. Does anyone have a solution to this?

We are trying to print to pdf format from a dwf (Autodesk Design Review) drawing file. DWF is autodesk’s version of PDF. In autocad, you can print to either dwf or pdf. However, some of the fonts within autocad are not recognized by adobe so the fonts often don’t print properly. Thus, we print to dwf first, then print again to pdf.
We operate 2 basically identical computers; the one computer is able to print from dwf to pdf and the other is not. When I say not able, only part of the drawing actually prints; like it is not able to process the data. The computer that cannot print from dwf to pdf, can actually print directly to pdf from Autocad. It just cannot print from dwf to pdf.
Both computers are running Windows 7, Autocad Architecture 2015, and Adobe acrobat X.
Let me know if this is enough information.

Similar Messages

Can not create .PDF directly from file

I just reinstalled Acrobat 9 (9.5) to a new computer. I cannot create a PDF directly from a Word or OpenOffice document. When I look at the "convert to" or "convert from" tab the file extensions are not listed. I was able to do this before. I tried repair installation with no luck. How do I fix this?

Does anyone have idea?

Creating pdf's from multiple files

Hello
I have 6 Quark artwork files. Is there a way to make pdf's from them all without opening each one and saving as a pdf individually? They would all need to have the same pdf settings.
Thanks
Vicky

That's odd... Try creating a blank Action (under Tools - Action Wizards)
and running it on those files. That should also convert them to PDF files.

Create pdf form from image file

is there any way to create a pdf form from an image? perhaps using ghostscript? TIA

#pacman -S potrace
The only disadvantage of this utility is input image format is bmp only.

Can we create internal table from txt file seperated by space?

Hi all,
I have text file abc.txt :
BP1 SAP1
BP123 SAP2
Now I can read this file GUI_UPLOAD FM
But I want to return this as table with two columns and two rows.
First row with two columns: BP1 SAP1
Scond row with two column: BP2 SAP2
I tried using
TYPES:
BEGIN OF i_po_data,
BP(3) TYPE c, " lmax length of the line of the text file
BP_name(10) TYPE c,
END OF i_po_data.
but in this case
First 3 characters will be filled in first column.
But in the second row BP123 , BP1 will be in first column but
'23' will not fit in first column.
How to insert the data in the first column just by space?
so that BP123 can also fit in the second column.
Thanks,
SUSHANT

hi,
if you have declared a variable of length 3 ,then how can you store data in that varaible which is more then 3 in length?
change your varaible length to get required result.

Can't create PDF from Word file

I may be missing some functionality or that functionality may not exist.
I'm running Acrobat Pro 9.2 and MS Word 2004 (11.5) on OSX Leopard 10.5.8. I want to create a PDF from a Word file but NOT using the Print dialog. I want to either create it in Acrobat using File > Create PDF > From File or create it from within Word using the Acrobat menu/toolbar. This is so that it will end up as a tagged PDF.
However, I don't have an Acrobat menu or toolbar in Word. I thought Acrobat was supposed to have installed these into MS Office when I installed Acrobat. And when within Acrobat if I select File > Create PDF > From File and choose a Word file, I get a message "Acrobat could not open 'filename.doc' because it is either not a supported file type or because the file has been damaged". This happens for all Word files.
Looking in Acrobat > About Adobe Plug-Ins... under Convert2AdobePDF it says 'Loaded: no'.
Are these two methods of converting Word files to PDFs something that can only be done in the Windows version of Acrobat? Or is there a plug-in or update I can download to install this missing functionality?
Thanks for your help,
Mark

Keep your Office2004. But Office 2008 does have a way to create PDF's from within the word and excel Programs.
It works better than through the AdobePDF Printer, or through the Apple Print menus save as PDF. (Unless you have X.6.x Snow leopard)
One thing it gets around is a long standing Problem Acrobat has had with word and excel since Word 6.0.1.a/Excel 5.0.1a. Acrobat doesn't know how to interpert Word Page section Breaks. Chopping up a word/excel document in to multiple PDFs that have to be merged back together. MS came up with their own PDF Converter that gets around that problem.

Can I create pdf files from Outlook 2003 messages with Acrobat XI Standard?

Can I create pdf files from Outlook 2003 messages with Acrobat XI Standard?

Yes, Outlook 2003 is compatible with Acrobat XI Standard and you can create PDFs from emails.
For reference: http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html

Can't create PDF from most MS Office files, or combine

After behaving nicely for months, Acrobat suddenly won't create PDFs, either from the Acrobat menu or (for most) from right-clicking in Explorer. If I try File> Create PDF> From File, the dialog says it's looking for 'all supported formats' but doesn't show any of the files in the folder (not even .TXTs). It'll create a PDF from the right-click menu in Explorer, for only a very a few file types (for example, .docx but not .doc), and it won't do a Combine Files, either from Explorer or from the program, for any filetypes (says 'cannot convert file' on all filetypes).
This worked fine up til today and I have the same setup at work (AA 9 Pro and Office 2010) where it works fine. Tried doing a 'Repair' but no change. Starting to panic here. What went south? Thanks for any clues!

I said to print as a check, not to forget PDF Maker. The print is a temporary work around while you resolve the issue, partiuclarly if you are under time pressure. With versions before AA9, PDF Maker was simply a front end for the printer and when the printer was checked things might fail. So you get some trouble shooting of where the problem is. If you do not want to troubleshoot to see if everything is broken, that is fine.
The updates and repairs are other steps to take. A reinstall is typically a last resort and should include deletion of the Acrobat folder and running a cleaner on the registry after the uninstall.
Generally, if the PDF Maker in WORD does not work, then none of the other options to right click and create a PDF or creating a PDF directly in WORD will not work either. The whole point is to trace down to what is the major problem. Often folks have problems because the PDF Maker is not being recognized in WORD and has to be activated, but you have the icon and that suggests things should work.
Your next step is to check the job settings file. Be sure you have access to the job settings file. You will usually get an error message if this access is denied for some reason and posting the error is helpful.

Acrobat 11 doesn't create pdf. files from doc. files

I tried to create a pdf. file from a doc. file (Office 2003). Acrobat 11 instead opens a warning message with the following contents (translated from German):
A high security level has been chosen. Start the application that created the document, activate the dialogue "safety warning", choose "always trust macros from this resource, activate ... from Adobe Systems Inc. (the message aborts there).
I selected "Extras/Macro/Safety/Safety level" , there I selected "low". The above mentioned message still comes up.
What do you suggest to do in order to finally create pdf. files from doc. files?
Additional information: Creating pdf. files from xls. files (Excel), txt. files (Editor) and saving a webpage as a pdf. file all work fine.
Thanks for your input!

Although Office 2003 is old compared to Acrobat XI, according to Compatible web browsers and PDFMaker applications it should work, though support has passed end of life.
So my first test (if it were me) would be to see if PDFMaker works if run in the simplest way (the only way I ever use it, this right click conversion stuff isn't in my worldview). That is, does the Acrobat menu appear in Word and does it work? If it does not work, no other method based on it can work.

Can not create PDF files 8

Removed PhotoShop 5 and a few other programs the other day to create more room. Now I can't create PDF files anymore in Excel and AutoCad. When I try, it outputs to my note pad with the following:
%%[ Error: undefined; OffendingCommand: setdistillerparams; ErrorInfo: CalCMYKProfile U.S. Web Coated (SWOP) v2 ]%%
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
Error accessing color profile: U.S. Web Coated (SWOP) v2
%%[ Warning: PostScript error. No PDF file produced. ] %%
Any sugestions.
I'm useing Acrobat 8 Standard with Windows XP
Thanks
Steve

If the repair does not do the job, then try a different job settings in the printing process. The error you are getting comes from the Distiller step of the PDF creation. You can go in steps if you wish by trying to print to file. Then opening that file in Distiller to see that happens.

How can I create a link from a CHM file to a webhelp file?

How can I create a link from a CHM file to a webhelp file?
The CHM output (accreditation.chm) is stored in a parent directory, and the webhelp output (index.htm) is stored in a child directory.

Open the usual Link dialog and enter the relative path from where the CHM will be installed to where the webhelp will be installed.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Can't create PDF from MS word 2007 Doc

I am using CS3 Acrobat Pro 8.2 and I can't get a Word doc to PDF. It starts but then just stops at about 10%. I have tried importing from Acrobat and just get an error message stating "An unexpected error occurred. PDFMaker was unable to produce the Adobe PDF."
Anyone have any ideas as to what may be the problem?

Bill, when using Word or any other MS office app, the process begins the conversion then just stops about 10-15% of the way and the process window disappears. No error message, nothing. It just stops. Now, I can save items as a "Quick and Simple PDF" but not as a "Fully functional PDF" when saving from Word. So I have narrowed it down that far. The screen shot below was created in Word and saved as a Quick and Simple PDF from Word.
When trying to use the Create PDF function from AA, I get an unexpected error message.

Can't create PDF files with adobe acrobat professional 8 on windows 7

I running acrobat Professional 8 on Windows 7 64bit. I can only create PDF files while logged on as administrator. I tried adding the user to the Administrators group, but still have the same problem. The system hangs right after adobe promts me for the file name, I provide the file name click save and it hangs when displaying the "printing message'
Any ideas?
Thanks
Fernando

Acrobat Pro 8 is not compatible with Win 7---especially for creating pdfs.

Can't create PDFs from Word due to Cambria font. Help.

I'm using win 7 32 bit office 2010 acrobat pro 9. I can't create pdfs from word because of problems with cambria. I've ttried all the fixes I can find but none worked. Any more ideas?
[thread title updated by moderator]

How are you trying to create the PDF? With AA9 you have to print to the Adobe PDF printer or use the MS plugin.
When you say you cannot create PDFs because of Cambria, what error messages are you getting and copy them here? At this point we really do not know what you are having problems with or how you are trying to create PDFs.
In the future, please provide a topic to help folks that are stepping through all of the posts. A blank topic almost led me to simply skip your post.

Can't create pdf from.docx

I'm on a late 2011 macbook air, running lion, office for mac 2001 and acrobat X pro. In acrobat, when I go to file, create pdf and navigate to a word doc, acrobat will not creat the pdf. I get an error message that reads "acrobat could not open test.docx because it is not a supported file type." Create pdf works with other file types. What's the skinny? Thanks.

Your going about it all wrong (If your using Mac). there are three options option to is much better. because of security method put in by Apple in OSX.5 and newer, there no longer is a PDFMaker feature.
Options:
within Word go to SaveAs... choose PDF.
Go to Print menu click on PDF and save as PDF to desired location
Go to Print Menu, click and hold the PDF button choose Adobe PDF. A menu pops up clicking on quality and choosing a setting is equivelent to Job Options in Distiller. Once quality is set choose wther to have Reader open or nothing open. Click okay next screen choose a name if you don't like the name already in the name box. Then choose a place to save. Then choose Okay.
Method 3 is far and away the best method. Makes the best and the smallest PDF's. Making PDF's in Mac is Completely different in PC since OSX.5 and newer. OSX4.11 and lower they are almost identical.
I remember answering this very question yesterday. May have been from another OP (Original Poster).

I can't create PDF files from DWF files

Similar Messages

Maybe you are looking for