I can't do anything when "generating peak file for..." ends.

After the reinstallation, I have a problem with "genarating peak file for.." , when it ends (when progress bar is full) the program stops and I can't do anything.
After the program is disabled, a message appears:
PhotoshopServer.exe - Błąd aplikacji
W aplikacji wystąpił wyjątek unknown software exception (0xc000000d) pod adresem 0x78138aa0
In English it may be:
PhotoshopServer.exe - Application Error
In application exception occurred unknown software exception (0xc000000d) at adress 0x78138aa0
What I should do?
I hope you understand what I mean.
Grettings Angelika.

Can you provide more information about your system, and the Assets that you are Importing?
This ARTICLE will give you some tips on the types of info that would be so useful.
Good luck, and welcome to the forum,
Hunt

Similar Messages

Premiere CS3 Freezes when 'Generating Peak File' for Video Clips

Well the title explains it all really.
I'm importing a large 7.5 gb video file (.avi) and in the bottom corner it says 'Generating Peak File for xxxx'.
Which is fine until the bar is right at the end, and Premiere freezes on me and I have to end the process..
Thanks for your time!
George

Temporary storage.
You will also find links to many
free tutorials in the PremiereProPedia that will quickly show you how things are done in Premiere Pro.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Crashing When "Generating Peak Files"

Experts...
I new in town, and to CS3.
Premier CS3 is working just fine on my system with one major exception...
Ecah time I import media I get a small progress bar in the bottom right corner of the status bar that reports "Generating Peak File for 123.avi" where 123.avi is the name of the file I have just imported.
As this progress bar reaches completion Premier hangs. No error message, just becomes unresponsive.
This is consistent for all imported media and very predictable, easy to replicate.
Any ideas?

Welcome! You will also find links to many free tutorials in the
Premiere Pro Wiki that will quickly
show you how things are done in PPro.
Cheers
Eddie
Forum FAQ
Premiere Pro Wiki
- Over 250 frequently answered questions
- Over 100 free tutorials
- Maintained by editors like
you

Generating Peak File for...

Wow, this has been going on for 3-4 hours already.
Unacceptable, and I can't find any reference to this process in the Adobe Docs for PP. I have no idea where it is in the process. Is it almost done? Does it have another 12 hours to go? What is the deal with this? I have not touched my computer in hours.
I have a PP Project with about 10 bins with about 1 hour of video in each.
Should I break my project down so I have 10 PP files with 1 hour of video per project?
I was hoping to keep everything in one PP file, but that is looking like a really bad idea right now. I don't remember having to suffer through anything like with when working with Final Cut Pro.
Will these stupid Peak Files be saved? Is there a chance they will get corrupt and have to regenerate? This took a whole half day, and more, since it's still ongoing. This is on my MBP 2.4GHz. If I want to move the files back and forth between my laptop and my Windows Core i7 920 desktop (I have Production Premium on both platforms), will I have to suffer the Peak File Generation everytime?
All video was captured in OnLocation, straight from the camera. That part of the process seemed really cool. This part with the Peak File is really lame.
Any tips on getting to a workable workflow with PP, or should I just bag it, and buy another editor (Final Cut Express would even probably do the simple cut edits I want to do) ? I do most everything in After Effects.

count_schemula wrote:
The solution? I'm going to edit on my windows desktop.
OMG, what have I gotten myself into?
Same problem on my PC. Premiere Pro 4.2 on Windows 7 64 bit. Freshly installed. All legit software.
I made a new project, import all the video, and let it generate all peak files.
It finishes. Close Premeire. Open Premiere... Generating Peak File for...
My heart sinks so low.
I delete the .pek files and the database files and in the preferences, I set it to save cache and database files to a folder within my project folder.
It dutifully generates all new .pek file and database files. I watch it write them one by one. It does not write anything in the original Adobe shared cache folders. It completes. I quickly edit up one segment, just so I have some work to show for my 4 days of messing around with this.
Close Premiere. Open Premiere.
Generating Peak File for...
I'm speechless.
Footage was captured to disc using OnLocation on a Mac from a Panasonic AG-HVX200a via fireware.
If you want to call me an idiot, point out where I'm not doing something right.
If you want to blame my rig(s) just know that I push these systems hard daily with ZERO issues in other apps.
I'm blaming Premiere at this point. Something about how this program works is just not right. In both cases it writes over already existing .pek files. I have 4 channels per clip, so 4 .pek files for every clip I have. It's towards 1000. pek files.

Premiere freezes when generating peak file

Hi,
Anyone know who to solve this?
I started a project in FCP 7 on a mac, exported an XML and imported it into a Win 7 64bit machine running PPro 5.03 to finish the edit.
All media loads (about 500 files) but while generating the peak files eventually the program locks up and crashes. This occurs on one of the video files (but a different video file each time). Furthermore, the peak files regenerate every time I open the project.
I have write xmp on import unchecked.
All the files are located on a single external drive (esata), which I use on both machines. I'm using Mac drive so it can be read on the Win 7 machine.
I also have my scratch disc set to the same drive (maybe this is an issue?), although I have not had an issue with it before.
The footage - 1080p Pro Res 422 HQ
CPU specs
Quad Core 2.4
4gb DDR2 Ram
GT240
Thanks

Is that eSATA external formatted as FAT-32? If so, that is likely part of the issue. There is a ~ 4GB limit on file size on FAT-32, and while the PEK files will not likely exceed that limit, the CFA files likely will, depending on Duration.
Good luck,
Hunt

Saving as HTML can't see anything when saved illustrator CS3 for windows

I'm working on a newsletter that will be used in a blast email. I am rather new at illustrator. I was told that I need to save it as html and did that but after it is saved and reopened there is nothing to see except boxes with a "x" in it. I tried linking and embedding the images but it didn't make any difference. Its not just the images its everything. Please help! I need to get this done today.
Thanks

When saving using the save for web you must use html with images or just images. Which one will depend on if you plan on using another html file or not.
The html file is not an image format. It is a text file with tags in it that tells your web browser where to find the images.
When you upload the html file to your web server, you also have to upload the images in the corresponding folder that matches the tag in the html file.
Example:
<img src="http://example.com/folder/image.jpg">
In your ftp program, once you access the folder that is visible to the world (where you store your default.html or index.html file) create a folder and in that folder upload your jpg image. Make sure you check capitalization of both folders and files as some servers are case sensitive.
If you need more help with the html portion I recommend that you post to the dreamweaver forum or see if your server has a forum and ask there. As there are several different methods in uploading files so I could easily miss something.
Good luck

I can't hear anything when making calls no dailing tone or anything but when I try and audioface time it works fine please help

I can't hear anything when making calls no dailing tone or anything but when I try and audioface time it works fine please help

Hi Nfrith1,
Please take a look at the article referenced below, the same as in my original reply. The receiver on the iPhone does not have anything to do with the speakers on the bottom of the phone nor your microphone.
Clear the receiver
The iPhone receiver won't work properly if it's blocked or dirty. Here's where the receiver is:
Follow these steps, testing after each:
Make sure nothing is blocking the receiver, such as a case or film.
If you have a new iPhone, remove the plastic film on the front and back of the device.
Check the receiver opening to see if it's blocked or dirty. If necessary, clean the receiver opening with a clean, small, dry, soft-bristled brush.
While you're on a call, turn on speakerphone. If you still can't hear, then your network or reception could be the issue. Try calling again later or from a different location.
Restart and update
Restart your iPhone and test again.
If there's still no sound or poor sound quality, update to the latest version of iOS.
Get more help
If you've tried these steps and there's still no sound or poor sound quality from your iPhone, contact Apple Support.
Learn what to do if other people can't hear you on a call.
If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone
Take care,
Alex H.

Re: Can't do anything when I open Office 2007

I can not do anything when I open office at all, I am self emplyed and need to do my books asap. it asks for the product key but the sticker at the bottom of the laptop has rubbed off. up untill last month I was able to use word, exel etc fine.
any help would me great thanks very much

hi,
When you purchased your laptop you were granted to evaluate m office for 3 month, it was a trial version. Now you have to buy it if you want to use it again. You can use Open Office:
http://www.openoffice.org/
OpenOffice is the leading open-source office software suite for word processing, spreadsheets, presentations, graphics, databases and more. It is available in many languages and works on all common computers.

Generating Peak File won't quit generating it

Captured roughly 2 hours of video using my Sony PD170 (don't laugh, I know it's antiquated, getting new one) with Windows Live Photo Gallery, (since PP CS4 quit importing video) and then imported that captured video into PP. I used 3 tapes to capture so there are 3 separate video clips:
tape 1 - 7.78GB appx 38 min.
tape2 - 7.80GB appx 38 min.
tape3 - 7.68GB appx 38 min. (this is the one giving me fits)
I have a 3 month new- Windows 7 based Dell Precision T3500 with a :C drive that has 151 GB Free and a D drive with 1.65 TB free. (RAM shouldn't be an issue ((i don't think)) as Bill Hunt suggested on a similar issue on another post)
I captured all the video fine, then when I imported the 3 clips into PP, it (PP) did it's generating peak file thing. But when it got to the last file, the bar on the bottom fills up to the end but just sits there. (I left it like that for a few hours and still nothing)
Suggestions from Bill Hunt on just 1 other posting I found on forums suggest it may have to do with an EXTERNAL hard drive this other person had using via USB, my fine folks in IT installed me an internal HDD of the 2TB variety (Thanks IT, LOVE IT).
PP freezes and I can't do anything, it locks up and says "Not Responding". I attempted to open that 1 file with StreamClip to see if I could fix anything that may be wrong with it but Stream Clip says it didn't recognize it.
Any suggestions? To me it sounds like a corrupt file, because the other two work just great, same format, shot on same camera back to back to back and imported the exact same way.
Thanks in advance.

Okay, here's an update to all my issues I have been having with capturing, editing, copying dvds and just a slow computer with Adobe:
First, thanks to all who responded, but to anyone with similar issues, listen up: I was experiencing many issues, not just the one noted in this discussion and what fixed it for me was to UPGRADE ADOBE PREMIERE PRO. I was using PPCS4, which as I said worked fine on my old computer. IT installed my extremely fast Dell Precision T3500 and of course migrated pretty much everything from my old computer to new one. That's when all the issues began, and to this day don't know why because according to Adobe Website and Dell website, Adobe Premiere Pro CS4 DOES work or IS CAMPITABLE with this computer.
After many efforts to find a solution, IT thought, lets try the upgrade to CS6 since I was 2 versions behind... so after applying for the Cloud membership (thanks Adobe, love it so far) and downloading CS6.... WHAM BAM, SPANK YOU MA'AM. It works terrific!
My video I mention above works perfectly and didn't kick me out once! It edited like it's supposed to!
Would anyone know why?
Special Thanks to Bill who's helped me more than he knows on this and other issues... and everyone esle who posted.
@CompNovice- I was running Premiere Pro CS4 and the video did play on Windows Media Player fine without any issues, it looked good.
@ Stuart- I could open the video both in PP and Media Player, editing issues with PP (froze up and kicked me out) but played out fine with Media Player. 1. I didn't get to the point of Duplicating it although I recaptured it a couple of times (Vidoe 3 that was causing me headache) 2. Again, I didn't get to the point of capturing in segments although I did try the entire video with streamclip and exporting to fix any issues and Streamclip didn't recognize the video (strange)

Generating Peak File

I am having problems with the last file that I open after downloading from my camcorder. This has happened everytime that I have created a DVD using Premiere Elements 8. Everytime I try to open the last file it says it is Generating Peak File and it will lock up on the last file everytime. Up till now the last video file hasnt been worth keeping,but this time I need it in my finished product. Thanks.

A lot depends on a lot of things, NOKNOT. It could be related to the type of camcorder your video is coming from or how you have your Premiere Elements project set up.
But this usually indicates a lack of hardware or hard drive space or a poorly tuned computer. How much free, freshly defragged space is on your C drive? Are you using a second hard drive? Is it formatted NTFS or FAT32 (as they come from the factory) and how much free, defragmented space is on it?
What operating system are you running? If it's a Windows machine, have you manually gone to Windows Update and ensure you've got even the non-critical updates? Have you got the latest version of Quicktime?
When was the last time you ran Advanced System Care on on your system? You might be surprised how much a good cleaning and tuning can do.
http://forums.adobe.com/thread/390602?tstart=30

Premiere CS4 Pro Hangs - Generating peak file

Windows Vista Ultimate. Dell M1730 Intel X7900 2.8 GHz 4.0 gigs of memory Dual NVIDIA GeForce 8700M GT with SLI off 175 Gigs available on raid for speed drive
I basically opened 10.4 G 52 minute AVI file imported via MovieMaker. I wanted to cut two segments about 3 or four minutes.
I can progress a bit at time before I get a not responding lockup. Once a blue screen of death.
On the not responding I noticed the "generating peak file in lower right corner with a gold filled progress bar.
I am doing dragging a marked clip to the sequence, two and crashed each time. Also crashed in process of finding my start and end points a few times. Then I added a transition and crashed there as well.
Any suggestions to do this without crashing?

For BSOD, or program crashes and hangs, this ARTICLE might help you track down "clues," as to what is going wrong, when it goes wrong.
Good luck,
Hunt

How can I keep lion from generating .DS_Store files on windows network partitions, but not disable it for all network partitions?

How can I keep lion from generating .DS_Store files on windows network partitions, but not disable it for all network partitions? I am fimilar with changing the setting for all network partitions(defaults write com.apple.desktopservices DSDontWriteNetworkStores true), but that is undesirable when I connect my laptop to my home network. A preferable solution would be where I could control the writing of these files based on disk format (NTFS vs HFS+).

Go to MacUpdate or CNET Downloads and search for ds_store. There are numerous utilities for preventing them from being transferred to Windows systems.

The last apple ID used on my App Store is stuck how do I change back to my apple ID? I can't download anything because its not asking for my apple ID and password, help?

help, the last apple ID used to download in my ipad2 is stuck, I can't download anything because its not asking for my apple ID and password, how do I change it back to mine?

Again, this only affects you if someone *redownloaded* content with a different ID. In my case, I emailed iTunes Store support, explained the situation, and they reset the counter. I recommend you try the same
If you read discussion boards, this is a significant change from a year ago, when Apple told people in the same situation to go f&$# themselves. Clearly it's dawning on them that this is a stupid policy, and my guess is if people keep complaining they'll change it to something more reasonable. Remember, it wasn't that long ago you couldn't re-download content at all.
Apple can't really afford to play hardball on this. Sure, the hardcore fanboys will always say "Thank you sir, may I have another" whatever Apple throws at them, but the rest of us will just switch to Amazon, which has none of these restrictions.

I tried to upgrade Reader and got a 1316 message. So I thought I would uninstall it and try a new clean download. Now I can't do anything. It is looking for Data\Adobe\reader 9.1.cab, Any suggestions?

I tried to upgrade Reader and got a 1316 message. So I thought I would uninstall it and try a new clean download. Now I can't do anything. It is looking for Data\Adobe\reader 9.1.cab, Any suggestions?

You may also not want to shout (large bold print) when you go to the Reader forum. It irritates a lot of folks and may distract from your question.

Generating peak file freezes on Premiere Elements 13

After several successes, I am unable to burn a disk or file of my latest project.
Generating peak file is stuck at 99 percent
Also, Adobe is very unstable. It constantly freezes, and I have to shut it down through Task Manager. Should I uninstall Adobe? Will I lose all my projects if I do?
Thanks.

ATR, replying to your queries:
1. Yes re generating peak file stuck at 99 percent
Are you referring to a message in the progress bar while you are waiting for
Encoding
Compiling Media
Burning to Disc
2. ,avi files are on my desktop. I have lots of free space. On the scratch disks I show 244 GB -- is that free space or filled space?
Where do you have your project's Scratch Disks directed to? And, how much free space is at the location
shown in
Edit Menu
Preferences
Scratch Disks?
3. Kaspersky
What antivirus program does your computer use?
4. No to the below questions. I'm just using sound and video in an .avi file. The current project is 20 minutes. No special effects, no transitions. I put a title at the beginning plus three captions.
Have you increased the size of your projects and have started to include different video formats in these projects?
Are you including more and more still with greater and greater pixel dimensions?
5. Yes, but I don't know if I'd see a flaw if I had one. Everything looks consistent, no gaps.
Have you expected your Timeline content
with the Timeline expanded using the +- slider above the Timeline, looking for content construction irregularities?
6. I enabled and disabled the Intel HD Graphis card. No difference.
I can do very little with Adobe now. It constantly says "not responding."

I can't do anything when "generating peak file for..." ends.

Similar Messages

Maybe you are looking for