I can't drag to reorder bullets in a build. The different bullets don't move and the "order" menu can't be activated. Any help?
When I open the Animate bar, and select Delivery by Bullet, then Build Order, it's impossible to change the order in which the bullets appear (it's much easier in Powerpoint). eg. in a series of bullets 1 / 2 / 3 / 4 I may want to display 1 and 3 (as questions) and then only show the answers 2 and 4 after, but still have them show in numerical order. I can't do this with Keyword.
How can this be resolved?
fizzogg wrote:
Can I just add that I was always able to do this with the previous version of Keynote (before Mavericks and the upgrade).
If you havnt deleted it, continue to use verion 5, its still in the applications folder, iWork 09.
Similar Messages
-
How do I view what slide I'm on out of how many I have total in keynote? I know on powerpoint it's at the bottom right of the window but I can't find it on keynote, nor can I find the option to make it appear. Any help would be greatly appreciated.
Your steps so far are OK but you may want to try:
1 Trash your user library Caches folder (House Icon with short name in Finder window (hard drive window)GOTO:House icon > Library folder > caches folder
2 Trash the com.apple.Safari.plist file in User library > preferences folder > Safari.plist as well as removing the library Safari folder its self.
3 you can selectivly re-install Safari 2.0 from your OS Tiger Install disk 1, (see Knowledge base article 301229 for how to just select the Safari Application) without doing a complete system Archive and Install.
4. Create a new Test user account on the system and test how Safari responds in the Test user, see if its a user related issue and not system issue.
5. Still no Safari response? have to do an Archive and install (not preserving user and network settings)article 107120
PS. Issue may be related to actual internet connection connectivity, power cycle cable modem and router or airport if using one as well as the computer(keep unplugged for 3-5 min) and plug the cable modem in and then the router/airport then power on the computer. Do the Airport Admin utiliy (applications, utilities on HD_1)update.
- do a hard reset of airport knowledge base article 108044(Express base) and 107451 (Extreme base)
- Check with internet provider for connection issues "cannot find server" ect. -
I have an old file with an .A4P video from 1999. I don't own any Adobe products (and don't really want to buy any). I just want to be able to convert the file to something that I can actually view. Any help?
I was a kid when I made a documentary for a school project. I've been trying to figure out how to retrieve the file. 4 years ago, I was able to get the files off the Iomega Zip drive (finally), but I now see the file is saved as a .A4P. There is also a file saved as a .PKG as well, but I don't know how to open this with my Windows 8 COmputer..a4p is an Authorware v.4 (Windows) project.
Interesting you have it as a .pkg...usually that's a published-on-a- Mac extension, if I recall.
At any rate, can you put the file up on a Box, Dropbox, FTP, etc...and send me a URL?
I should be able to published it so you can view the project (it would be an .exe).
It can't be converted to anything though - not without manual effort. -
I try to log into my Apple ID and it says that it has sent an E-Mail to my Apple ID to vertify that it is me, I understand that but what I don't get is that I can't get onto my account to click open the E-Mail to vertify myself. Any Help?
This is on the Apple ID manage and create page, this has happened to three of my accounts and I seem to get to the same exact spot and it just contradicts itself and won't let me log on at all. I have hooked up two E-mail accounts to the Apple Account and Vertified the accounts through the E-Mails sent to the external E-Mails but it still doesn't let me get into my Apple E-Mail at all.I logged in changed the primary E-Mail address to a different one, vertified it then tried to log in it said either to send an E-Mail to veritify again or to do my security questions, so I choose to do the security questions and put in my Birthday like it asked and it said that it was wrong and I had to authenticate it to get in, why is it so hard to just set up a Apple ID really though!
So I tried the E-Mail to and it has not sent me an E-Mail then I tried to log in again and it has locked me out of my account so I try to recover my password and it gave me the same options to get my password back and both options are doing the same as before, it says I don't know my on birth date or it is wrong or needs authenticate it, then the E-Mail doesn't come through!
This is just stupid now. -
i have been using adobe acrobat 11 pro, and now i want to download it to a new laptop and insert my serial number, but i can't download it, any help?
Acrobat XI, X - http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
If the link provided does not work, explain more detail regarding why you say you cannot download. -
I am importing a video and in iMovie the video is now white. the audio still plays and I can play the video properly outside of iMovie so any help is good?
I going to recommend again, downloading and installing some video helper applications.
1. http://perian.org/ (this will add a number of different file types to the ones QuickTime already plays)
2. http://www.divx.com/en/software/mac (will add more file types to what QuickTime can play)
Either one of these might be necessary to get MPEG Streamclip to export the video. Failing that the only other thing I have found is an obscurve discussion thread on Avid.com:
http://duc.avid.com/archive/index.php/t-277791.html
I've figured out what the problem is on my end. The video came from Avid on a Windows machine and was encoded with Squeeze. I found out that the 2 seconds of black at the top of the video were at a different frame rate than the rest of the video. I chopped off the 2 seconds of black and started at the first frame of video, exported it with Quicktime Pro and was able successfully view the video in ProTools. Apparently Squeeze will let you create a movie file that has different frame rates within the same movie... This fixed my issue that was exactly as you describe, hopefully it might work for you.
Lastly, you could try converting the video clip using HandBrake -
have an ipod and then got the wife an iphone4. all passwords are screwed up. she can not access playstore cuz she doesn't have password. i can not get find any help on how to get or update a password for the ipod. and then get her a separate password for her iphone. we need to save her photos, music, etc to ? icloud and the phone stuff to verizon cloud? so when she gets her new Iphone6 she can have all her "stuff" back on the new phone. hope this makes sense. please offer suggestions here or at [email protected] thanks for your help!
Oh no! I'm sorry to see there's a lot of confusion here and data shared, x-rayDon. We can definitely work to fix. This happens when two devices share the same Apple ID, so she will need to reset hers. She can do so by assessing this link Apple - My Apple ID. You will need to decide who will keep the account if want separate Apple IDs since purchases cannot be shared unless you do Family Sharing.
RobinD_VZW
Follow us on twitter @VZWSupport -
My aperture library will not open after restoring my whole computer after a kernal panic. I can not get the Aperture troubleshooting menu to open...any help?
Leonie,
Fisrt let me thank you for your reply and assistance! So here is the problem with so more detail...I was not sure I was going to get any replies ; )
I restored from a time machine back up.
History of Failure:
I was trying to launch Aperture when the kernal panic occured. My computer had been closed, and asleep and the battery was dead. I plugged in charger and it was restoring/waking up after being asleep/shutting down from dead battery. I launched Aperture from the dock and as soon as it opened the kernal panic occured. After that the computer would not turn on. It would try to boot then it would shut off. I even tried to safe boot to no avail. I went to the Apple store and they told me that the only thing I could do was restore whole computer from back up. So thats what I did.
Since then my previous aperture library: "2011" will not open. I have created a new aperture library "2012", and it runs fine. I have added new photos for about the past month...no problems.
When I launch aperture with 2012 library then try to switch libraries, I get the following prompt: "The selected library is from an older version of Aperture and requires a relaunch to switch." I choose "Relaunch" and I get the following warning prompt: "There was an error opening the database for the library “~/Pictures/Aperture Library 20111.aplibrary”." The only option is "Quit"
Both libraries are version 3.2.3
Computer stats: 3.06 GHz Core 2 Duo, 8 GB 1067 MHz DDR3 RAM, OS X 10.6.8
I have tried to launch aperture troubleshooting by holding option+command from both the aperture icon and from the library file, neither will launch the troubleshooting feature.
I am ok with computers, but not a whiz (mechanical engineer)...to me it seems as though there is a corrupt path or file or some sort of "check" that is failing, becuase the failure occurs so fast after trying to launch aperture. Maybe that doesn't make any sense but just a thought.
I hope that you may be able to provide some insight. Thank you again for you time and I hope that you have a nice day!
Mike -
Using iCal on my ipad2 and can't seem to create a repeating event, specifically, an appointment that occurs the second Wednesday of every month. Any help is greatly appreciated....thanks!
iPad 2, iOS 5.0.1Although this isn't currently possible in the iOS Calendar app, go to iCloud.com (not on your iPad, but on a computer browser like Safari or Firefox) and log in. There, you can add an event in Calendar and have the options to make it repeat however you want.
-
Can the resolution be changed when taking a photo. When I take a photo it is always 1MEG or more. Like to reduce this so that the photos are easily e-mailed. Any help?
When you email a picture from Photos, you can choose the size.
http://i1224.photobucket.com/albums/ee374/Diavonex/3bec08e4423ac97de93d4560186b6 daf.jpg -
Just got Mac book pro. I can't connect to office remotely thru the remote window. My office is window based and I have no problem connecting while at the office thru the server but cannot at home. Any help would be appreciated!
This what my IT replied with:
That teh MacBook cannot connect with RWW because it requires Active-X to connect. That MAc browsers (Safari) do not use Active-X but only Windows (IE) uses Active-X control.
It would seem to me that there must be a way around this. Any help?
Thanks, -
for more than 2 years we've repeatedly asked for our comcast tv and internet to be fixed. for 2 years it's been the same thing, change the box and say everything is fine, when it's not. for the last month there have been multiple appontments made with none kept and with no call. no one seems to know a thing or even care and it's gotten way too old, to the point of cancelling and moving on to fios/verizon. so I ask why can't we get any help?. we've asked for an upgrade, no past money is due, can't play video games live (runs too slow) things just do not work as advertised and again no one here or where ever our calls are sent to seems to care. it's we'll send someone on this date and then they don't show, call again and the same thing. 5 times in the month of July alone.
The Comast team available to the forum has been notified, expect a response here soon.
-
Ever since I updated my OS, the screen on my Mac will automatically become huge if I keep my mouse on the screen. I can't figure out how to return the screen to a normal size. Any help?
Hold down the 'ctrl' key and scroll backwards on the mouse.
Then go to System Preferences > Universal Access > Seeing. Turn off the Zoom feature.
Similarly in Sys Pref > Mouse uncheck the box for 'Zoom using scroll wheel…'
If it still occurs after that there may be a corrupt .plist file. -
Hello. I dropped my ipad, first gen, from my chair to the floor. The screen went black and I can't start it again. I have tried to hold both buttons down at the same time, but nothing happens. Any help?
You will probably have to contact Apple for repair but before you do try this:
Turn your iPad upside down on your lap and give it a hard smack on the back. -
This is iMovie 10 I believe. Thanks again!! Really appreciate the help!
To do this in iMovie 11. use the SHARE menu. Share your project using the Share menu and choose Export Using QuickTime.
In the Dialog box that comes up, choose Sound to AIFF, or one of the other sound options. This will create a file that you can drag into iTubes.
Maybe you are looking for
-
How to change Default setting AutoCommit to 0 in Procedure or in Connecting
[tttest@host1 ~]$ ttisql "dsn=ana_tt1122" Copyright (c) 1996-2011, Oracle. All rights reserved. Type ? or "help" for help, type "exit" to quit ttIsql. connect "dsn=ana_tt1122"; Warning 20000: Use of a deprecated feature: Authenticate (ignored) Connec
-
Very recently (after the latest security update?), I've lost the option on the print dialogue to print to a PDF. A work-around is to preview and then save the preview as a PDF, but I would like to have the print to PDF option back. I've run Disk Util
-
My hard drive crashed. Do I have to re-buy everything I lost?
My hard drive crashed a while back and I lost all of the iTunes music that I had purchased. I have now replaced my hard drive. Do I have to go back and re-purchase everything I lost, or does the iTunes web site maintain a record of my purchases so I
-
How to invoke a function with arguments in JSTL expressions
Hi , I want to know how to send arguments in the JSTL expression. I have a scenario like this for (int i=0; i<nicList.size(); i++) NavigationItemControl nic = nicList.get(i); ni = nic.getNavigationItem();
-
Default User Name in Person Responsible
Hi All, If the User opens any Transactions to Create - By default his id or his name should be picked up , More over again it should not be Editable , it shoudl be Grey Mode. where i could do this setting . Do guide me. Thanks in Advance. Regards, Am