I can't email alerts with calendars

At the moment of setting up the an email alert, calendars does not allows me to set an email. There is no email and calendars opens a pop up window error saying there is no email.

I just figured it out! I set the email account I am using to try to send the photos as my default account by going to General > Settings > Mail > scrolling down to Default Account. Mine was set as my iCloud account. I switched it to gmail and now I can send photos.

Similar Messages

Have problem setting Email alerts for Calendar events. Warning message says I need to set up a card in Contacts with my email. I do but it doesn't recognize it. How do I indicate the email I want alerts sent to?

The system of setting up email alerts for Calendar events worked fine in Snow Leopard but since I upgraded to Mt. Lion Calendar won't let me set email alerts. When I try, I get an error message saying I need to set up a card in Contacts for my email. I have a card set up in Contacts for both of my email addresses but it doesn't recognize them. Perhaps the name I have on the card doesn't match a name that Calendar is looking for. Calendar doesn't seem to have a way in Preferences or elsewhere to indicate the email I want alerts sent to. Any ideas how I can get this system working again? Thanks for your help.

You might want to consider starting a new discussion. Since this one is marked solved, less people are likely to look at it. You can link to this one.
See if another contact is marked as this is my card.

Why can't I get an email alert in Calendar since downloading Mavericks????

Why can't I get an email alert in Calendar since downloading Mavericks????

I have exactly the same problem: https://discussions.apple.com/message/23646805#23646805
Let me know, if you find the solution.

Email Alert with data from payload SAP PI 7.0

Hi,
i have a requirement to send an email alert when a Purchase Order Transmission fails through PI. In the email i need to send PO number which had failed.
Format is:
Subject- PO # XXXXXXX failed to reach XXXTarget
in the mail content i need to mention the error and why the error occurred.
Please tell if this is possible in SAP PI 7.0 If yes then How?
Regards,
Ashwani

Hi,
If the message fails in in mapping, you can send the alert with PO number in the email. Steps would be following.
Catch the execpetion
Call RFC SALERT_CREATE by passing required parameters
You can also pass the PO number as one of the value which will can be used in you alert category
PO number can be used as one of the Alert container
But if the message fails in adapter engine you cannot send the PO number in the email. You can just send email with standard alert containers.

How can we use Alert with Canvas

Hello to all
How can I use alert with Canvas .
I want whenever user do mistake then a alert message should come.
Thanks in advance
Mukund

And where is the problem? Sample code can be found all over the place... just look for it.

Prime Infrastructure 2.0 email alerts with hostname?

I have configured email alerts however in the message it shows up with the IP address instead of hostname.
Is there a way to configure the hostname to be added? Custom text or adding the switch differently (added by direct IP search)?
Thanks,
Chris

I see now, this is a poor carry over from NCS. The option that says include "controller" in email does provide the switch hostname. Hopefully by version 3.0 they will have all the wireless naming fixed when it applies to converged.
Thanks Rob!

Desktop email alert with outlook 2013 in windows 7 no skype

I recently Upgraded from office 2010 to office 2013 running on windows 7 Enterprise in my office Laptop, I do not have Skype installed in my laptop and I don't receive any email alert notification or either sound. I am using outlook 2013 with Exchange
account, what should I do ?
Regards,
Praveen

Hi,
Do you mean there is no Skype App after installing Office 2013?
Did you custom install Office 2013 without checking Skype app?
Thanks
Mavis
Mavis Huang
TechNet Community Support

How can i email itunes with a complaint?

Hi, I have been an Itunes customer for awhile now and I have no complaints except for 1. Recently I lost everything I had on my computer so I had to reinstall Itunes into my computer. I had around 620 something songs but now I only have around 200! This has happened to me before where I synced my Ipod or in this case Iphone into the itunes and it says I can only have the songs that are in that current library. It happened once before and I just let it pass, but I am not going to rebuy 400 songs that I paid to have. What I dont understand is how I used my apple ID to sign in with the newly installed Itunes yet it showed a library that I hadn't had in like 4 years. If I signed in with the same ID I had before when I had 600 songs shouldn't it have had a list of all the songs I had? What should I do?
Thanks PLZ give me any answers or what you think I can do about this :-)

You can contact iTunes Support however they can't really help with your non-store purchases. Hopefully you library is merely corrupt and can be restored as follows...
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
If I signed in with the same ID I had before when I had 600 songs shouldn't it have had a list of all the songs I had?
Not really. Unless you purchased a subscription to iTunes Match you should have access to your store purchases that are available to download from iTunes in the Cloud. iTunes Match is no substitute for a proper backup as described above. That is the only way to be certain you will be able to restore the entirety of your library in the event of a problem.
tt2

EEM- Email alert with IP SLA Based on Packet Loss

hi joseph,
i need your advise, i want to get alert email based on IP SLA Packet loss
the scenarion as below :
1. If the traffic hit threshold packet loss greater than 20% as long 15 minutes --> send email
2. If reset condition packet loss eq 0% as long 15 minutes --> send email again
I don't know how to configure it condition. could you help me to verify my configuration below?
ip sla logging traps
ip sla 1
icmp-jitter 10.216.0.105 source-ip 10.216.0.107 num-packets 100 interval 40
frequency 50
ip sla schedule 1 life forever start-time now
ip sla reaction-configuration 1 react Packetloss threshold-value 3 1 threshold-type immediate action-type trapOnly
ip sla enable reaction-alerts
event manager applet TEST
event syslog pattern "IP SLAs$1$: Threshold exceeded"
action 2.0 mail server "10.240.0.10" to "[email protected]" from "[email protected]" subject "Alert for Intermittent Link" body "link intermittent in x %"
thank you

What's you have could work with a few modifications. First, increase that threshold-value of 3 to 20. You can leave the falling threshold value of 1. You'll need to add another applet to match the falling threshold syslog message. Not sure exactly what that one will look like.
The first applet will look like this:
event manager environment q "
event manager applet ipsla-threshold-exceeded
event syslog pattern "IP SLAs$1$: Threshold exceeded"
action 001 cli command "enable"
action 002 cli command "config t"
action 003 cli command "no event manager applet ipsla-healthy"
action 004 cli command "event manager applet ipsla-unhealthy"
action 005 cli command "event timer countdown time 900"
action 006 cli command "action 1.0 mail server $q 10.240.0.10$q to $q [email protected]$q from $q [email protected]$q subject $q Alert for Intermittent Link$q body $q link intermittent in 20 %$q"
action 007 cli command "action 2.0 cli command enable"
action 008 cli command "action 3.0 cli command $q config t$q"
action 009 cli command "action 4.0 cli command $q no event manager applet ipsla-unhealthy$q"
action 010 cli command "action 5.0 cli command end"
action 011 cli command "end"
And the second applet (the one where you'll need to fill in the appropriate syslog pattern) will look like:
event manager applet ipsla-threshold-normal
event syslog pattern "FALLING THRESHOLD PATTERN HERE"
action 001 cli command "enable"
action 002 cli command "config t"
action 003 cli command "no event manager applet ipsla-unhealthy"
action 004 cli command "event manager applet ipsla-healthy"
action 005 cli command "event timer countdown time 900"
action 006 cli command "action 1.0 mail server $q 10.240.0.10$q to $q [email protected]$q from $q [email protected]$q subject $q Link is stable$q body $q Link has been stable for 15 minutes$q"
action 007 cli command "action 2.0 cli command enable"
action 008 cli command "action 3.0 cli command $q config t$q"
action 009 cli command "action 4.0 cli command $q no event manager applet ipsla-healthy$q"
action 010 cli command "action 5.0 cli command end"
action 011 cli command "end"

How do I set up an email alert in calendar...

I use iCal on both iPad and iMac; I would like the option to have an email sent to me by way of a reminder for some appointments but when I try to set this up on my iMac I get a message saying that I need to have a card in Contacts with my details on; in Contacts there is a card with my full details on it and my name in the list has a grey silhouette beside it, siginifying that I am the main user. I'd welcome a clue as to how to set this up; I'm sure I've done it before but can't now find anything which will guide me through.
peeyar

peeyar,
Click on your card in Contacts, then select Contacts>Card>Make This My Card.
If that is not successful, delete, and recreate your card. Then once again make sure to designate it "Make This My Card."

I can't email photos with my iPhone 4S iOS 6.1.3. How can I resolve this problem?

The question says it all. I can send photos to myself on occasion, but they don't go through to friends' email addresses. I go to the photo I want to send, tap the arrow in the lower left corner, tap Mail, enter email address of desired recipient, tap Send, select Medium/Small/Actual Size (none work), email disappears, I see the photo on the screen again, and the photo isn't sent.
Is there something I can change in my Settings? I have toyed with Wifi, 3G, etc. and nothing works.
Thanks for any help you can provide!

I just figured it out! I set the email account I am using to try to send the photos as my default account by going to General > Settings > Mail > scrolling down to Default Account. Mine was set as my iCloud account. I switched it to gmail and now I can send photos.

Ios 7 calendar not synchronizing alerts with Calendar

Hi Folks. I recently moved to Mavericks and I've noticed that when I create an alert on the iPhone and then sync with my Mac, the event itself shows up in calendar, but its alert is replaced with the calendar default (15 minutes in my case). Sync'ing events created on the mac works correctly: the events show up on the iPhone with the alerts preserved. Any help would be much appreciated! Versions: iOS 7, iPhone 4S, Mac OS 10.9.5, Calendar 7.0.

I totally agree with you bigflea. The previous calendar was so much better. The facility for scrolling the pages day by day was brilliant and other features were better too. It's a backward step in my view.... Very disappointing. Come on 'apple' please review this and change it back to what we like best!

Email alert with 6 email accounts

For the love of God how do I setup my phone to alert me (make a sound) when I receive an email on any of my mailbox? For some weird reason, it only alerts me on the primary and secondary mailbox on main screen.
Please don't tell me that this ain't possible, I'm going to throw this piece of sh** out the window!
First I lost the tap and turn, then a lot of features on the manual that is not on the PHONE! Like the out of the office reply! And mailbox renaming!
I should have sticked with my G1

You did not mention the phone model, but I assume it is a S6v3. In this case, this is the situation:
- you cannot have more than 6 E-mail accounts
- you cannot set more than 2 E-mail addresses for auto-retrive
- you cannot get alert from more than 2 E-mail addresses
Maybe someone else knows better, but this is my expeience. Obviously, you won't find these limitations in the specs or User Manual.
2110i, 6150, 6210, 6310i, 6670, 9300, 9300i, E90, E72, HTC Touch Pro2, Samsung Galaxy S, Samsung Galaxy S II

Can any help me with Calendar

I am making sort of calendar. I'm new with this class.
How can I get name of the day on witch month starts. (Exemple 1 June, which day is it, monday, thursdy...).
If any has a tutorial about calendar or something to help me please tell me.
Thanks very much!

javadocs?
DAY_OF_WEEK_IN_MONTH
public static final int DAY_OF_WEEK_IN_MONTH
Field number for get and set indicating the ordinal number of the day of the week within the current month. Together with the DAY_OF_WEEK field, this uniquely specifies a day within a month. Unlike WEEK_OF_MONTH and WEEK_OF_YEAR, this field's value does not depend on getFirstDayOfWeek() or getMinimalDaysInFirstWeek(). DAY_OF_MONTH 1 through 7 always correspond to DAY_OF_WEEK_IN_MONTH 1; 8 through 14 correspond to DAY_OF_WEEK_IN_MONTH 2, and so on. DAY_OF_WEEK_IN_MONTH 0 indicates the week before DAY_OF_WEEK_IN_MONTH 1. Negative values count back from the end of the month, so the last Sunday of a month is specified as DAY_OF_WEEK = SUNDAY, DAY_OF_WEEK_IN_MONTH = -1. Because negative values count backward they will usually be aligned differently within the month than positive values. For example, if a month has 31 days, DAY_OF_WEEK_IN_MONTH -1 will overlap DAY_OF_WEEK_IN_MONTH 5 and the end of 4.
See Also:
DAY_OF_WEEK, WEEK_OF_MONTH, Constant Field Values

HT4759 How can I share reminder with calendar ????

Pls can you help me.

Are you sharing your iCloud calendar with someone? If so, just create an event reminding everyone of the upcoming event.
Otherwise, you can also share a reminders list with another iCloud user, as explained here: http://help.apple.com/icloud/#mm4bb3fa6e. Then create the reminder that you want to share.

I can't email alerts with calendars

Similar Messages

Maybe you are looking for