I can't enter my password in Visual Voicemail

I just had to re-load everything onto to my BB this past Friday. Everything works great, except that I can't type any letters into the password field for Visual Voicemail, it is stuck on number entry and won't let me shift. HELP!!

Admin, please delete this topic. I realised this morning that the passwords are all numerical, I used the wrong password. Thanks

Similar Messages

  • HT1212 my ipod screen is cracked and i can't sync my ipod on to itunes becauseit it is locked with a password and i can't enter the password because the heat sensor is messed up and i don't want t restore it and lose everything so how can i get passed tha

    My ipod screen is cracked and i can't sync my ipod to itunes because it is locked with a password and i can't enter the password because the heat sensor is messed up on the ipod becasue of the screen and i don't want to restore it and lose everything. What can i do?!

    All you can do is to restore and thus erase the iPod unless you can get a data recovery company to preserve the data.
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
      How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • IOS7 - After taking a photo the lock screen zooms in and I can not enter my password. Does anyone know why?

    Everytime I take a photo on my phone either when it is locked or not, when I come back to my phone to use it next the lock screen has zoomed in and I can not enter my password. I have to either switch the phone off or keep playing with the side button. Its only happened since iOS7 has been installed. Can anyone help?

    On the Home screen, double-tap with three fingers to exit zoom.
    Then go to Settings > General > Accessibility and make sure Zoom is turned Off.
    http://support.apple.com/kb/ts3129

  • Oct 22, 2013 11:58 PM downloaded 10.9  all well 'til I get desktop and can't enter my password, message of error, and it shuts down:  reboot and error reappears"your computer     restarted because of a problem. touch any key.....etc'  75-yr-old needs guid

    Oct 22, 2013 11:58 PM 
    downloaded 10.9  all well 'til I get desktop and can't enter my password, message of error, and it shuts down:  reboot and error reappears"your computer     restarted because of a problem. touch any key.....etc'  75-yr-old needs guidance.........running 10.8.5 til today................????????  Can run in safe boot, but what do i do now ???  thanks
    MacBook Pro, OS X Mountain Lion (10.8.3), Intel core i5 2.3GHz 

    Well, after some thought, I did a 'safe boot', did a disk verify and repair in Disk Utility, repaired permissions in DU and had the same problem I'd mentioned in post.
    SO, I went back in (safe boot.........that is, hold down start button, then 'shift') and went to applications and removed or uninstalled any apps that I thought might be interferring with the re-boot or, specifically, with my being unable to sign in with my p/w.........(at the first key stroke, it would crash and give the 'error' message)....I had both Webroot and Dashlane installed that I thought could interfere with password recognition (Webroot protects from viruses, et all and Dashlane is a password codifying appl.) I took out whatever else I thought might not be friendly and, guess what ?? When I signed out of 'safe' mode, and rebooted normally, it worked.........and has been working properly for 3-4 hrs now, so guess it's good-to-go..........seems like it...........hope this helps anyone with the same problem I'd had...........no need to visit "genius bar" some 55 miles from here............guess us mid-seventies guys ain't too old for learnin'...........G'Day, Mates !!

  • Downloaded 10.9  all well 'til I get desktop and can't enter my password, message of error, and it shuts down:  reboot and error reappears"your computer     restarted because of a problem. touch any key.....etc'

    downloaded 10.9  all well 'til I get desktop and can't enter my password, message of error, and it shuts down:  reboot and error reappears"your computer     restarted because of a problem. touch any key.....etc'  75-yr-old needs guidance.........thanx
    running 10.8.5 til today........................????????  Can run in safe boot, but what do i do now ???  thanks

    Well, after some thought, I did a 'safe boot', did a disk verify and repair in Disk Utility, repaired permissions in DU and had the same problem I'd mentioned in post.
    SO, I went back in (safe boot.........that is, hold down start button, then 'shift') and went to applications and removed or uninstalled any apps that I thought might be interferring with the re-boot or, specifically, with my being unable to sign in with my p/w.........(at the first key stroke, it would crash and give the 'error' message)....I had both Webroot and Dashlane installed that I thought could interfere with password recognition (Webroot protects from viruses, et all and Dashlane is a password codifying appl.) I took out whatever else I thought might not be friendly and, guess what ?? When I signed out of 'safe' mode, and rebooted normally, it worked.........and has been working properly for 3-4 hrs now, so guess it's good-to-go..........seems like it...........hope this helps anyone with the same problem I'd had...........no need to visit "genius bar" some 55 miles from here............guess us mid-seventies guys ain't too old for learnin'...........G'Day, Mates !!

  • Greetings, I have an iPod Touch, that I recently tried to access the apps store. I can't enter my password, due to not being able to switch the keyboard to lower case letters. I tapped on the arrow up button, and it makes a click sound, but the letters do

    Greetings, I have an iPod Touch, that I recently tried to access the apps store. I can't enter my password, due to not being able to switch the keyboard to lower case letters. I tapped on the arrow up button, and it makes a click sound, but the letters do not change. Am I doing something wrong?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • Can't enter my password

    HI,
    I CHANGED my font from English to Persian but my password is in English and I can't enter my password now. How can I change my font before enter my password to use my phone,? Why can't I use my key board setting for change the font?I really unsatisfied to Sony for this problem.please help me

    Sounds like you need to perform a system repair but for feedback of this nature you can either contact Xperia care or forward it to Google as I'm sure the same happens on other OEM's and Googles own devices however
    Performing a system repair using PC Companion - This will factory reset your phone and erase all data
    Switch off your phone and unplug from Pc (Hold volume up and power for around 10 seconds)
    Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the on screen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process
    If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP

  • HT201401 How many times can I enter a password if my child has forgotten it?

    My child set a password on a disconnected phone that he was using as an ipod.  I am trying to unlock it.  How many times can I enter a wrong password?  Is there a limit and what are the consequences?
    Thanks!

    Depends. Passcode can be set to erase all data after 10 failed attempts. If you repeatedly enter the wrong passcode, your iPhone, iPad, or iPod touch will be disabled for longer intervals before you can try again. After too many unsuccessful attempts, you won't be able to try again until you connect it to the computer with which you last synced it.

  • Can't Enter network Password

    I just plugged my Appletv in and selected the language. It found my network and I am now at the keyboard screen to enter the password. It makes a sound when I press buttons on the remote, but it never moves... It stays on"A". Is there something I need to be doing to be able to enter the password with the remote? If I want to tray another network without a password, How do I get back to that screen? Do I just Unplug it? Help Please

    trying to set up my apple TV and it asks for a wireless password / do not have one / tried "none" and "password" no luck / I can not get past this / Is thgere adefault password???

  • Can't enter Hex Password 40/64

    Visiting son's who has Microsoft 500 wireless router with WEP 64 bit password. I access WiFi nets all over the place with my Powerbook G4 with OS 10.4.8 but can't get the password accepted. I've seen post & document that say enter $ before hex 10 digit password, but the box on the pulldown menu won't let me enter a "$" in that field.
    Help!

    Cross platform WEP can be very troublesome. Probably the best thing to do is to convince your son to switch to WPA and forget about 64 bit WEP. 64 bit WEP is easily defeated.
    At a minimum have your son switch to 128 bit WEP.

  • Help - I can't enter my password anymore in the device password screen on my Z10

    Hope you can help. When I attempt to enter my password in the device screen nothing registers in the field. Also there is a box around the number 1. It feels as if the keyboard has been switched off / linked to some accessibility setting - but as I can't get a password entered I can't get into the device to do any further diagnostics.

    Press and hold your power button until you see BlackBerry on the screen. Ignore anything you see before that and continue holding it until BlackBerry appears. Once your phone reboots, try once again to enter your password.
    I hope that helps you.  
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • How can I log on my session when the memory disk is full. I can't enter the password

    Need help!!!
    I can't start my session on my air book .. Some days ago I had a message which sayed that the memory disk is full..
    I wasn't starting to cancel files so when I would do it some hours later I can't anymore enter the password of my session.
    Some one can help me please.

    Use your computer to go to http://www.icloud.com/find
    Locate your iPhone, and choose "Remove This Device" on the bottom.

  • We have a talking woman, and I can't enter the password!!

    Hi, could someone help me. Son had an ipod touch for christmas, has put on a password, which he still knows. He has been locked out because we now have the talking woman and don't know how to enter the password because the touch screeen 'bit' is not working. we had the talking woman earlier when he was mucking around with the settings but got rid of her then (didn't need to enter the password), but now don't know how to enter the password through her!!!

    What is the talking woman? If the iPod is locked because the incorrect passcode has been enter too many times you have to restore the iPod via iTunes to get the iPod functional again. If you know the pass code yu can just do the easy restore and you will have to enter the passcode. Otherwise you will have to place the iPod n recovery mode. See:
    http://support.apple.com/kb/ht1808

  • Can't connect on the internet. At a friend's house, but when I type the password in, the "OK" tab is shaded out, and therefore I can't enter the password, which will allow me to connect to friend's server. I have 10.5.8 Leopard installed in my laptop.

    I'm visiting a friend, and I can't connect to her internet. My operating system is 10.5.8 Leopard. I have a laptop. When I type in the password, the "OK" tab is shaded out, preventing me from entering the password, and thereby preventing me from getting onto her server. Any suggestions?

    Hi is this Wifi/Airport?
    If so...
    Instead of joining it from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.

  • Safari 5.0.5 can't enter username/password in a secure website...

    Safari 5.0.5
    I can't enter my username or password in a secure website.
    https://hbi.ingplans.com 
    Username and password fields will not populate (I can select username login preference).
    The site works in Firefox and I can log into other secure sites in Safari.

    Maybe looking at the source would give a clue to the problem. I didn't go through the code to try to debug it but it appears to be an initialization problem.
    Anyway, if you select SSN then Username (or vice versa), it unlocks the fields.

Maybe you are looking for

  • How do i take a snap shot on my mac?, how do i take a snap shot on my mac?

    how do i take a snap shot on my mac?, how do i take a snap shot on my mac?

  • Application Client to call JSP...

    Hi all, I am using Websphere to write EJB codes and JSP pages and print report based on data retrieved from database. Every morning, i need to manually print sales reports and copied it to a network folder. I found it very tedious. I planned to write

  • Automatic creation of delivery(vl01n)

    Hello, I want to create a outbound / inbound delivery through t-code VL01N  with reference to salesorder / repair order. Please suggest me any BADI , BAPI of functional module.. tHANKS, aNIL Edited by: anilpat1 on Mar 31, 2009 4:03 PM

  • Possible 'Class Path' Issues

    Hi Guys, I have problems compiling a file and I suspect it could be something related to classpaths. I am using NetBeans 6.9.1 as my IDE. When I set JDK 1.6 as my platform and complile, there are no issues, the programs compiles fine. My 'classpath'

  • ALEAUD not coming to SAP from XI & u0093Acknowledgment not possible" in idx5

    Hi All, I am trying to configure ALEAUD in SAP->XI->JDBC scenario for Idoc acknowledgment. I did following config in SAP WE21 create port for XI WE20 create Partner type XIDLOGSYS1 ‘LS’ , Inbound parameter ALEAUD. In XI I delete all entries from IDXN