I can't expand text in illustrator

I expand text in Illustrator all the time but can't seem to do it now. I also can't see the anchor points.
I've rebooted my PC twice with no luck.
Any advice?

ghnedak,
Ah, then it was a temporary corruption, see items 1) and 2) on the following list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Similar Messages

Can i copy text from illustrator to indesign and retain attributes

Hello,
I received an illustrator cs3 file that I need to convert to InDesign cs3.
Is there a way to copy the type that is set in illustrator to indesign, while retaining the attributes. I need to be able to make changes on the type in indesign, so converting type to outlines isn't an option.
Thanks!
T

Even though you can change your InDesign preferences for Clipboard Handling to allow formatted information to be pasted into InDesign from other programs, unfortunately Illustrator still won't allow you paste in text with formatting. This is due to how Illustrator and InDesign handle text differently. Even if you copy the text from Illustrator and paste it into a program like Word, which has a lot of different ways to handle formatted text, Illustrator just treats text differently than other Adobe applications.

How can I expand text fields in my PDF file which I built in Forms Central?

I'm working in Windows 7 and just created my first form in Forms Central. I have many text fields that I intended for the end user to be able to type as much information in them as necessary. I selected the "multiple lines of text" setting for each of these fields. I was told by someone at Adobe a while back when I was trying to decide on learning LiveCycle Designer or using the much more user-friendly Forms Central that the form fields would not automatically expand in the PDF form, but that I would be able to click or drag on the fields manually to expand them so that, ultimately, they could be printed with all the comments, for however many pages it would take. I've exported my Forms Central form to a PDF file. However, when I type multiple lines of text in the form fields I set up to be "unlimited," I cannot get the form fields to expand. What have I done wrong? Help, please!

We are dealing with a similar situation. We have downloaded LiveCycle and created the form, but as we knew would happen, the changes that come for the content of the form are causing us to max our trial version, and as soon as the form needs a change outside of the trial time period, we are faced with the next dilemma, as Adobe doesn't offer to purchase a single license at a reasonable rate. The only reason we wanted LiveCycle was for the dynamic field feature. I plead with you to consider offering that feature in Forms Central. The other issue that we are having is that our users sometimes need to paste a table into the expandable text field. Is that even possible in Live Cycle? We don't at this point need the web-based functioning that Live Cycle offers. Thank you.

Create expandable text boxes & maintain Indesign interactive features

I have a form created in indesign which has interactive buttons included. I exported to pdf and now need to add expandable text boxes. I tried to do this in Livecycle but when i imported the pdf as a flowable form (with a view to make it dynamic) the interactive buttons i had created disappeared. is there a way around this so that i can create expandable text boxes but still maintain the buttons i have created?
PS i am completely new to Livecycle

Hi Reggie,
Here are two versions. One form with a fixed number of pages and the other with a variable number of pages (you can add additional page 1).
In the fixed number of pages, the click event of the index button includes the following instruction to go to a target page:
xfa.host.currentPage = 1;
This works because the page we want is always "1".
If the form is dynamic and the number of pages can increase (or decrease) from those set at design, then we need to track the actual page number of each target page, at runtime.
The script in the index button now looks like this:
xfa.host.currentPage = page2.thisPage.rawValue - 1;
Here the target page is page2 and on this page we have a field called "thisPage". The instruction is to jump to the current value of thisPage on page 2.
For each target page that you want to index, you will need a hidden field (thisPage). You need to put this on each page and not on the Master Page.
Hopefully the examples will help explain this.
This is how we do it, there probably are other solutions out there.
In relation to the second part, the link feature in Acrobat will not work with a form developed in LC Designer. Paul has a thread (http://forums.adobe.com/message/1923918#1923918) with a PDF for attaching documents, which were then listed in a list box. This could help you in developing your form.
Another option is to have a button which becomes visible is there are attachments in the PDF. The click event then shows/hides the attachment panel. The user can then see the attachment and double click on the one they want/need. I know it is not as clean, but it is easier to implement. The javascript for the button would be:
app.execMenuItem("ShowHideFileAttachment");
Hope that helps,
Niall
the text keeps collapsing...

Expanding text in an auto-sized popup window can cause the text to overflow

First Topic includes a popup link. This includes rather long expanding text. When this is activated, the popup is too small to show everything, and has no scrolling possibility. Anyone know a workaround?
I tried to report this as a bug through the Adobe Feature Request/Bug Report Form, but it vanished into thin air and I can't check whether it was recorded or not...

Instead of an autosizing popup you could define a size that allows for the expansion or add some blank lines at the end of the popup topic, on opening there will be white space at the end but it provides expansion space. The latter will not work where the popup topics are long enough to invoke scroll bars.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How can i use text expander with the new Mavericks,

how can i use text expander with the new Mavericks,

I regret upgrading to mavericks for the same reason
ftamez wrote:
how can i use text expander with the new Mavericks,
Now I have been searching - and you have to buy an app and it will cost you $34.99 (what a rip off)

How to convert the Adobe 10 PDF to Adobe LiveCycle ES2 so that I can make the text boxes expandable?

When I convert the Adobe 10 PDF to Adobe LiveCycle ES2 it is a static document, thus not allowing me to make the text boxes expandable. How do I take a current Adobe 10 PDF with Text and convert it to Adobe LiveCycle ES2 so that I can make the text boxes expandable?

Hi Alan,
TextField objects can expand dynamically. There are a few things that you need to do:
1. The TextField object should be contained in a subform that is set to Content: Flowed. This isn't technically necessary, but if you have anything below the expanding text box and the subform is set to Positioned, the text will expand and overlay what's below.
2. On the Field tab of the text field's Object property tab, check the Allow Multiple Lines checkbox
3. On the Layout tab, check the Expand To Fit checkbox under Y:/Height
4. Set the PDF Render Format under Form Properties/Defaults to Dynamic XML Form. If you're previewing in Designer, don't forget to set the preview to Dynamic too.
Regards,
Rave

Can I change text in a tiff using Illustrator?

I have a layout for an ebook with some important black and white bitmap illustrations in tiff., 300 dpi. These has appeared ok on print, but not on screen, reading the same pdf-file. This is partly because there are texts in fontsize 5-6 pt. People tell me I have to convert the drawings, or at least the text, to vector graphics.
Question is now - since at the moment I have CS6 avaiable - can I open these tiff.s in Illustrator, change the text to vector and then save in a format, that can be inserted in the Word2010 layout? (You might wonder why I use Word, but it was a question of economy, when the project was started up). Or are there other ways? Thanks for any answers!

Hi, here are some more details:
I´m working on a layout-job, that involves both Adobe CS and Microsoft Word, and since I haven´t found any forums that comprises both, I´m putting my questions here and have been very grateful for the help I already got from your answers. These are some precise details of my task:
The layout is for a revised and extended edition of a book, previously published twice 10-20 years ago, first in danish, later in english. I wasn´t involved in these. The new layout that I make is made in Word 2010, set up in a template made for the purpose. The book is being prepaired both for paper and for ebook publishing, and as far as the printed paperbook I have no worries concerning the illustrations, since they have already been printed in a satisfyingly good quality. The problem is how to present clear and readable illustrations for the e-book.
The material I was given consists of the complete english book-layout made in PageMaker 6.5 plus all the illustrations as separate TIFF-files with english texts. These TIFF´s have been inserted in my new Word layout, and then some of these texts do not appear with a satisfying clearness in the test PDF´s I make from the Word layout (PDF being the first format we have chosen for the upcoming ebook). The illustrations in question here are (originally handmade) black and white line drawings (ink), mostly geometric figures with the english texts (appr. 5,5 to 9 pt). The texts were – using Photoshop - added (not by me) to scanned copies of the original danish-texted drawings. These scans were saved as TIFF´s, typically 600 dpi, onelayered, bitdepth is 1 – and these TIFF´s are the ones I need to improve and at the same time make a seceond set with danish texts.
The attached TIFF is a section of the most problematic of these drawings (the complete drawing is 1,2Mb). As for the size, the diameter of the largest ring should in the end layout be appr. 1,7 cm, which is eqiuvalent to the original size of the TIFF. In AI it opens up smaller, in PS it opens up bigger – for some reason? Of course e-book readers have the possibility of zooming in, but in 1:1 the illustrations should look somewhat ok, don´t you think? (Here I tried to insert my TIFF, but get the message "content not allowed" - what could be wrong? The file is not over 200 Kb)
So these are the steps: 1) Improving/altering the TIFF´s, maybe change the format to something compatible with Word2010. - 2) Inserting the drawings properly in Word. – 3) Convert to a good quality PDF within an acceptable filesize.
My questions right now are: 1) Will it be enough to replace the unclear texts with bigger and/or screenfriendly fonts, using Photoshop again, - or 2) do I need to change to vectorized texts, using Illustrator or other software like Corel Draw. 3) How to keep the quality through the process of being exported/inserted to Word and subsequently converted to pdf?
My experiences with PS and AI up till now are: The process of vectorizing my illustrations or part of them, seems a long a winding one, let alone the trouble with inserting EPS-files in Word. I have made som attempts with WMF, but the files I get are simply much too big (20Mb+). EMF, exported from AI and in Word converted to a Microsoft Office Drawing Object is the best I have made, but the file is still rather big, the section alone is 5,6Mb. (I would prefer not more than 2Mb). Other suggested formats that I don´t get any satisfying results with are PNG and JPEG. EPS is unreadable (we have already discussed this) in Word, and looks ok when I reach the final PDF made with PDFCreator, but using Acrobat Pro there is a black field where the EPS should be.
Any suggestions?

Would like to put a pop-up in expanding text. Can anyone tell me how?

I have a need for creating popups within expanding text. A
colleague tells me there may be a script out there to drop into the
code that would allow me to do that. Can anyone give me some
guidance about that? Or does anyone have any other recommended
work-arounds for this? I tried putting popups within popups but
that doesn't work either. Any help is greatly appreciated.

Hi Lynn
Your initial instructions sounded spot on to me. But I sense
that Shawn is possibly using the term "pop up" to refer to
"Text-only Popups" and not the full blown popups as we know them to
be. Additionally, I'm wondering if more confusion is ensuing as a
result of possibly referring to a DHTML drop down as Expanding
text. I only suggest this as what I saw seems to imply there are
several steps being displayed when the "expanding text" is clicked
upon. Expanding text is normally used for something concise and
brief, where the DHTML drop down is normally used for longer
procedures as was mentioned here.
Shawn, if I'm understanding you correctly, here is how to
insert a Text-only Popup in Expanding text. You simply create the
popup information in the main body of the page. Once created,
select the text the user clicks to see the popup, and CUT to the
clipboard. Now double-click your expanding text to open the editor.
Now paste the text where you want it. Once finished, you should end
up with some expanding text that when expanded, has a working
Text-only Popup.
Hopefully this helps some. Sorry I wasn't replying earler.
Was out conducting a Captivate class in Jacksonville, FL and just
got home. Looks like you had good solid answers and suggestions
from Lynn and Kitty Liz though!
Cheers all... Rick

Can't select text or expand text box

Hi, everyone.
I have a Page Layout document that exhibiting some odd behavior under Pages 3.0.2.
Everything is ungrouped and unlocked. "Make master objects selectable" is on, although I don't think I made any of the objects master objects.
I can't select a text box using the mouse. The only way to get at the text is to perform a find. When the text is selected via the find I then have a cursor and can manipulate the text.
Also, the plus sign handle isn't responding to the mouse, so I can't expand the box. Very frustrating.
This seems very much like a bug, yes?
-André

Hi, Jerrold.
I thought of that, too, but choosing Select All selects every object except the one giving me the trouble. Also, there seems to be no evidence of another object over laying.
Ok, I just tried something slightly different that did the trick.
When the cursor is on the background, choosing Select All does nothing (yep, nothing, even though I can type). If I purposefully select an object, THEN choose Select All, all the objects get selected, except for the "problem" one.
But I noticed a menu item called "Make Background Objects Selectable." Choosing that gave the "problem" object handles and I am now able to edit it.
It seems that Select All wasn't doing what I expected, and that was the broken link in the chain.
Thank you!!
(And a public thank you to Dennis, too. Who correctly diagnosed the problem and sent back a working file. Awesome community.)

I can't copy a text based illustrator page to indesign

Hi i have the tutorials running of illustrator and indesign. I have just created a page of text boxes in illustrator and now need to copy or place this into my indesign file but cant seem to do it.
I either get unformatted text or a plug in error in indesign.
I know this is possible because I am copying what I have seen done before but cant make it work.
Urgent help needed as will miss deadline as a result.
Many thanks

Unfortunately, it's not possible to copy anything other than unformatted text from Illustrator to InDesign. The two applications have completely different, non-compatible text engines.
However, save your page as an Illustrator (AI) file. Then choose File > Place. If you turn on Show Import Options, you can choose which artboards are placed. Note that the AI file will not be editable.

Expanding borders with expanding text fields

Hello
I need help with my form please.
I have a bunch of rows within a flowed subform set to western text that can dynamically expand. However depending on which object expands, the border for only that object expands and the rest of the objects are still at their orginal height. This makes the subform look really bad
I was wondering whether there is a way to dynamically expand all objects in a row when one object expands so that their borders all line up!
Please help!!

Check out this tutorial:
http://www.avoka.com/blog/?p=756

Expanding text fields to fit text

I have a customer who would like to be able to put large amounts of text into a text field and have it all print. The amount of text can vary, so he would like to have a box where he can enter the text and have the box size adjust to the amount of text entered, even to the point of adding extra pages if necessary. I have tried using the Expand to Fit option, but all that seems to do it allow the text to scroll while the box stays the same size. Is this something that is even possible? If so, how? Thanks.

Hi there,
Usually the "Expand to Fit" option under the Height property of the object is what you need.
You also would have to make sure that your text field is "Allow Multiple Lines" & Field Format set to "Rich Text"
Parents objects (subforms & page) are "Allow Page Breaks Within Content" and the Content set to "Flowed"
And once those settings are set make sure that your text field is Expand to Fit on the Height property!
Hope this help!

Expanding Text shows up as links

I have something odd going on. I use RoboEngine and publish
all my projects together. A majority of my projects show the
expanding text produced by using the Glossary Hotspot Wizard
correctly, but a handful is showing the terms for the expanded text
as LINKS. The color of the terms that are being displayed correctly
is red, the ones showing up as links are blue and are underscored.
My procedure for all my projects is the same when I'm running the
Glossary Hotspot Wizard. Any comments or suggestions?
Vick

Hi Vick
I think what is working against you here is the simple fact
you are using RoboEngine. This indicates you are either using
RoboInfo or are producing WebHelp Pro outuput. I'm guessing that
you are in a very small minority. As such, there is simply a dearth
of folks experienced with your product.
Are you able to produce regular WebHelp? If so, does the
problem manifest then? Assuming the answer to both of those
questions is "yes", then maybe we can help. But until we do know
the answer, I'm guessing we are all assuming it may be something
simply related to using RoboEngine as opposed to being more generic
in nature.
Cheers... Rick

Expanding Text Glossary Terms into Popup windows

I am using RH6 and I have a help project that uses expanding
text glossary terms throughout all the topics. When the topic is
printed out, the glossary terms are auto expanded and it disrupts
the flow of the text.
My questions are:
Is there a way to quickly change expanding text glossary
terms to just popup hyperlink windows?
If not, how can I find all the expanding text glossary terms
using the Multi Find and Replace?
Can they be searched for in a Report?

There's another way. Enclose your glossary definitions in
brackets [a means of enclosing text] so that the definition does
not interrupt the flow.

I can't expand text in illustrator

Similar Messages

Maybe you are looking for