I can't export contacts from iPhone5 with iOS6.0.1 to the Comand NTG4-W204 (Mercedes C280 2008). I can pair its by Bluetooth,call, speak via Comand but no chance to load contacts to Comand from my iPhone5?

I can't export my contacts from iPhone5 with iOS6.0.1 to the Comand NTG4-W204 in Mercedes C280 2008. No problem with pair both devices,call and speak,good voice quality, just impossible contacts loading to the Comand. This is frustrating, any other mobile phone does it, but iPhone5 doesn,t...???
I don't know where is the reason of this problem in iPhone5 or in Comand and what and where something should be updateed, upgraded, installed, reinstalled..etc HELP!

If it's slow on startup it would be extensions loading or LaunchDaemons starting up. 
You should have a look in:
/Library/LaunchDaemons
/Library/Extensions
You can count out anything in your home folder and it shouldn't put anything in /System as that's reserved for Apple. 

Similar Messages

  • Should my iPhone 1 (iOS 3.1.3) with Bluetooth 2.0 (Handset HSP?) work with wireless earbuds with BT 4.0 and the Headset (and Handsfree, A2DP, AVRCP) protocol? They pair and connect; status bar looks good. But audio always comes out the speaker. Thx.

    Should my iPhone 1 (iOS 3.1.3) with Bluetooth 2.0 (Handset HSP?) work with wireless earbuds with BT 4.0 and the Headset (and Handsfree, A2DP, AVRCP) protocol? They pair and connect as expected (with a PIN); status bar looks good and shows Bluetooth active, and I even see the iPhone displays the battery levels of the wireless earbuds. But audio always comes out the speaker. (If I plug in wired headphones into the headphone jack then audio comes into the wired headphones, as expected.) I have rebooted the iPhone; I have had it forget about the wireless earbuds, and repaired and reconnected; I have reset all network settings. Thx in advance.
    PS: I understand that more recent versions of iOS have a way to choose where audio output goes (speaker, headphone jack, Bluetooth device). Does this older version of iOS? I could not find an option or setting.

    I've noticed this lately as well, with my iPhone 4. I couldn't confidently pin it directly on any particular iOS update, but my iPhone used to automatically connect up via Bluetooth with my Prius's handsfree feature, and now it doesn't. I work with a CE-based device at my job, with Bluetooth capability, and I used to test out that feature by having it discover my iPhone. This no longer works either.
    What I have found (not really a solution, but it does work and may be a clue for Apple) is that if I simply go to the Settings app then the General -> Bluetooth screen and let it sit there, it will pair right up with my car within a few seconds. Bluetooth is always on, and always says "Now Discoverable" at the bottom of the settings screen.

  • I use an iPad 3 with IOS6. When opening the calendar and strolling to march 2013, calender always shuts down.

    I use an iPad 3 with IOS6. When opening the calendar and strolling to MARCH 2013 calender shuts down...
    Anybody with same problem or having a solution?

    Try removing any all-day events from the calendar for the 1st April 2013 e.g. if you are syncing the calendar from somewhere else (e.g. Outlook on a PC or iCal/Calendar on a Mac) then change it to a timed event instead of all-day - it seems that there is a problem with all day events on that date which is when the clocks change due to daylight saving.

  • Can't make and answer calls using handset. But just works fine with speaker

    I have a Blackberry Curve 9630 , 
    I can't make or answer calls from the handset. Caller is able to hear
    me when call is picked up but I can't hear them. I can only make or answer
    the call using speaker option. And works fine this way. Have tried re-booting
    but doesn't work. Never experience this before and phone was working
    perfectly right up to this morning. All otheres like BBM, Email, SMS, apps,
    are working fine.
    Appreciate a quick reply on the same. Thank you.

    Can you test playing music through the BlackBerry and see if it is audible through both the speaker and the earpiece?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Export to Excel Fails with "Internet Explorer cannot display the webpage"

    We have a couple of report servers all hosted internally on VMs.  They are all SSRS 2008 R2.
    For all of these, when viewing the reports remotely in IE, they run fine.  However when we try to export them to excel, a new tab opens in IE, but the tab just displays with "Internet Explorer cannot display the webpage"
    There are no other errors and it never progresses to save or open. 
    THE SSRS log files dont contain any errors either so i dont think its a resource issue, but they do say steam=''
    library!ReportServer_0-1!11cc!03/11/2014-08:49:24:: i INFO: RenderForNewSession('/ReportsMain/Test/Production Report')
     webserver!ReportServer_0-1!11cc!03/11/2014-08:49:27:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
     library!ReportServer_0-1!11d4!03/11/2014-08:49:31:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
     webserver!ReportServer_0-1!11d4!03/11/2014-08:49:31:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
     library!ReportServer_0-1!7a0!03/11/2014-08:49:44:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
     webserver!ReportServer_0-1!7a0!03/11/2014-08:49:45:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
     library!ReportServer_0-1!624!03/11/2014-08:51:05:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
     webserver!ReportServer_0-1!624!03/11/2014-08:51:05:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
     library!ReportServer_0-1!18d0!03/11/2014-08:51:06:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
     webserver!ReportServer_0-1!18d0!03/11/2014-08:51:07:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
     library!ReportServer_0-1!7a0!03/11/2014-08:51:34:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
     webserver!ReportServer_0-1!7a0!03/11/2014-08:51:34:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
     library!ReportServer_0-1!1610!03/11/2014-08:51:38:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
     webserver!ReportServer_0-1!1610!03/11/2014-08:51:39:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
     library!ReportServer_0-1!624!03/11/2014-08:51:49:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
     webserver!ReportServer_0-1!624!03/11/2014-08:51:49:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
     library!ReportServer_0-1!11d4!03/11/2014-08:52:14:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
     webserver!ReportServer_0-1!11d4!03/11/2014-08:52:14:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
     library!WindowsService_0!3c8!03/11/2014-08:52:28:: i INFO: Call to CleanBatch()
     library!WindowsService_0!3c8!03/11/2014-08:52:28:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
     library!WindowsService_0!3c8!03/11/2014-08:52:28:: i INFO: Call to CleanBatch() ends
     library!ReportServer_0-1!11cc!03/11/2014-08:55:29:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
     webserver!ReportServer_0-1!11cc!03/11/2014-08:55:29:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
    Does anyone have any suggestions?

    Hello,
    Since you have motioned that it is work well in IE7 on the VM. We can try to enable the compatibility view of the IE to troubleshooting the issue.
    Reference: http://support.microsoft.com/kb/2536204
    Based on your description, the issue is just occur when view the report remotely. The issue may relate to Internet Explorer, please refer to the following methods:
    Run the Network Diagnostics tool in Internet Explorer.
    Reset the modem or the router.
    Use the Delete Browsing History feature.
    Use the Internet Explorer (No Add-ons) mode.
    More detail information, please refer to the similar issue below:
    http://answers.microsoft.com/en-us/ie/forum/ie8-windows_other/internet-explorer-cannot-display-the-webpage/c8a0b157-820a-4a14-80f3-806ab51717fa
    Hope this helps.
    Regards,
    Alisa Tang
    Alisa Tang
    TechNet Community Support

  • Since I'm having probs with ios6 and Safari, would the Atomic browser be worth a try?

    Since i'm having probs with ios6 and Safari (Autofill and loss of Wi Fi), would the Atomic browser be worth a try?  trouble is, I'm a bit of a 'newbie' when it comes to the 'clever' stuff, so need a bit of expert advice here.

    I use the Atomic browser for some things. I feel it's main advantage is that you can set the type of browser that Atomic reports. I set mine to Internet Explorer and that allows me to visit regular websites without being redirected to a tablet version. Its free so why not download it and give it a try. If you find it wanting just delete it.

  • Why can't I receive FT calls on MacBook Pro, but can on iPhone 5

    I am able to accept and interact when I answer face time calls on my iPhone 5, but my MacBook Pro call will fail.  My MBP is just a year old.  What could be the issue? Suggestions?

    Hi russraman,
    I've been having that issue off and on lately, but I'm certain it's my cable provider and not my Mac. You probably see the Wifi indicator with an "!" in the middle of it? It means that the Wifi was able to get onto the network, but not to make an internet connection because of a bad IP address.
    So, to resolve my issue, I have to reboot my router. Give that a try to see if it clears it up for you.
    Cheers,
    GB

  • When I export an iMovie Project with a sped up clip, the sound is squeaky even though I lowered the pitch in iMovie. Help?

    I've lowered the pitch of th video in iMovie, but when exported, the sound is very high pitched and squeaky.

    While we all have MacBooks in this forum not all of us use iMovie. There's an iMovie Support Community where everybody uses iMovie. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/ilife/imovie

  • Issues with iOS6.0.1 and the maps app.

    Hi!  After upgrading to iOS 6.0.1 on iPhone 4, I am no longer able to display traffic on the maps app.  My device with iOS 5.1.1, traffic still displays.  Is there a fix for this issue?  If not, how can I downgrade to iOS 5.1.1?  Thanks!

    Hey Chris, thanks for responding, in my above post I mentioned my troubleshooting:
    Since updating my iPhone 5S (T-Mobile) to both 8.0.1 and then 8.0.2 I've had more issues than I've ever had with any iOS in the past (with the exception of iPhone 4 running iOS 7, but clearly that is an older phone, not a 1 year old model like the 5S). Have tried resetting, powering off, etc too by the way.

  • I can log in on my apple account via internet but not the App Store or iTunes Store?

    I cannot log into either the App Store or iTunes Store, however I can log into the apple website and get on my account there. I've tried to change password several times but nothing. HELP!!

    More info on this...
    I'm using an iPad mini
    Safari works just fine - proof of internet connection
    Mail works just fine.
    I go to "Settings" > iTunes & App Store try to login and all I get is a spinning wheel in the upper left corner of the screen.
    Thanks,
    Chuck

  • HT204387 iPAD mini iOS 6.1 can pair keyboards, why not the Magic Mouse?

    I need to access a site that requires click & drag with my iPad Mini. Has anyone figured out a work-around to get the MAGIC MOUSE to pair with the iPAD Mini? I am having trouble understanding why it won't pair.  Can Apple make an update to iOS 6.1 to include the MM?  It already can pair many other Bluetooth accessories, why not mice?

    Thank you KPenguin. I understand now, though I still can't 'click & drag' items in Kano games.  The 2 second hold that works for rearranging app icons doesn't seem to work.  Guess I'll be returning my new MMouse, which is a shame. I was looking forward to playing around with all it's cool features! :)
    Note to self: Mouse needs active cursor to work! Haha (it's a duh moment here!!) o.O

  • After updating to iOS 8.3 on my iPhone 6, Blu Logic bluetooth calls with a charging phone in my car do not go through the car's speakers.  Siri's message now adds, "....calling _______on speaker."

    Blu Logic bluetooth calls using "Hey, Sir" do not go through my car's speakers since updating to iOS 8.3.  They are routed through the iPhone 6 speaker after Siri says, "....calling ________ on speaker."  The "on speaker" term was never used before.  The Blu Logic bluetooth unit is an aftermarket device installed in a 2005 Buick LaCrosse.  It worked perfectly until the iOS 8.3 update.

    OldGnome: 
    Blu Logic seems to keep a virtually invisible support presence on the internet.  I did return to the aftermarket installer of the unit.  He told me pretty much the same as you.  Apple expects the equip. manufacturers to keep up with iOS.  It's a bit of a Catch-22.  Perhaps iOS 9 will exterminate the bugs!!
    In the meantime, the only thing I've really lost is hands-free dialing for bluetooth calls in my car.

  • Facetime why can't I get a call on my ipad

    I Can receive and make Facetime calls on my iphone but not on my ipad. I have uploaded the latest software and verified my email and phone number- syill does not work

    First of all you should have logged this question in the 'Using iPad' section, not the 'Using iPhone' section.
    Second of all: iOS: Troubleshooting FaceTime

  • Hoy can i syncronize my iPhone agenda with my IPad agenda through the iCloud?, some contacts from the iPad don't exist in my iPhone.

    Hoy can i syncronize my iPhone agenda with my IPad agenda through the iCloud?, some contacts from the iPad don't apear in my iPhone, and some of them are incompleted.

    No. You can set up as a new device or restore from iCloud or iTunes. It looks like you backed up with iTunes, so you can't restore with iCloud. To backup your device in iCloud, go to Settings > iCloud and activate it

  • Office 2011 for the mac, want to export contacts with a specific catewgory so I can produce a specific report

    office 2011 for the mac, want to export contacts with a specific catewgory so I can produce a specific report, I can do this by selecting a tab delimited file format & shows up as .olm but I can'y open this file or import to another application, any suggestions?

    http://answers.microsoft.com/en-us/mac

Maybe you are looking for