I can't export due to a quicktime error!

I tried exporting different files and it will, but for some reason i can't export this one, can someone help?

Ok.
You can try exporting your sequence as Export > Quicktime Movie, same settings and self contained if you haave space.
Close FCP, open Compressor and drop that movie as source. Check if that way work.
Hope that helps !
Alberto

Similar Messages

A pdf form I have designed cannot be exported due to an "unexpected error". What can I do?

When I try to save a particular pdf form I have designed I get a message that it cannot be exported due to an unexpected error. I have not had this problem with other forms I have created. What can I do?

Yes, Forms Central. I made the form by using a blank form page, copying and pasting another form I had done previously to the blank page and then modifying it.
The original form I had copied from as the basis for the new form saved as a pdf form perfectly: the copied and then modified version kept displaying the error message.
In the end I have managed to work around this problem by opening another template form (the Assessment one) and spending forever copying the items from the form i couldn't export over to the " template form one at a time (after deleting the template items, naturally).
I will be making other forms that will have versions with minor variations and it would be much easier if I could copy and paste a whole form at a time rather than cell by cell but is that going to make the copied forms impossible to export from FormsCentral as it did with this one?

I updated my computer to the os x and now i can't export my videos to quicktime i got the new compressor still won't let me please somebody help

i updated my computer to the os x and now i can't export my videos to quicktime i got the new compressor still won't let me please somebody help

You need to update the software. This is a very old version that will not work with the current OS. Did you purchase the software from the App Store? If do sign in with the Apple ID used to buy it. Go to the Purchases page and find the software.

Datafinder can't start due to an internal error.

After installing LabVIEW 2009SP1 and DIAdem, I get the following popup every time I restart the computer:
"The datafinder can't start due to an internal error. (244) Please wait until the National Instruments PSP Service is running and try starting Datafinder again."
I'm not very familiar with the NI PSP Service or how to get it running. I tried to repair the LabVIEW installation but no luck.
Has anyone seen this before?

Hi West,
It's probably a corrupted install of the distributed systems manager. You can uninstall it and reinstall it by downloading it here (http://www.ni.com/download/ni-distributed-system-manager-2013/4216/en/).
Regards,
Basil
Applications Engineering
National Instruments

Can't export to DVD because Quicktime fails with error: 0

I've got several projects in FCP X that I need to create DVD images of. My first approach was to export them to Compressor, set the settings, and then submit them. When I did that, the first project exported fine, creating an AC3 file and an M2V file needed for a DVD. And since I had a Post-Transcoding Action set to create a DVD image on the hard drive, I got a nice IMG file.
But the second and subsequent projects all failed. The video target worked fine, but each of the audio targets failed with an error. In the History window, they each have this:
Failed: QuickTime Error: 0
So I did some searching here for suggestions, but it seems most of the answers are for older versions of FCP and Compressor. I did Reset Background Processing, but that didn't fix it. So then I went back to FCP X and did a Share to DVD directly, instead of going through Compressor. The same thing happened: the job failed, and I got QuickTime error 0.
So my first question: How can I get more information about why QuickTime is failing? Is there a more detailed log somewhere to tell me specifics other than a vague error code number?
Second, why would the first project's audio export just fine but the second project didn't? They use exactly the same project properties, the same effects, etc.
The only difference I see is that the audio and video clips were encoded with different codecs. The first one (the one that worked) has an audio config of 1 Mono with clips that are Linear PCM. The second project (the one that failed) has an audio config of 2 Mono with clips that are AAC.
But I do tons of projects using AAC clips that I can "share" to DVDs just fine. Any clues?
Thanks,
Todd.

Correction: I don't use AAC audio clips all the time. I was mistaken. Almost all my projects use Linear PCM audio clips (the kind that are working OK). So is there something I need to know about AAC audio that could make it generate QuickTime Error: 0 when converting to Dolby AC3 format?

Can't open itunes because of quicktime error message

hi
when i try opening itunes i get a message saying it can't run because it detects an error with quicktime. it says click "help". then i get something saying, "http status-message kb/304424". it also says description requested response not available. does anyone know how i can fix this?
thank you

iTunes depends on a good QuickTime install, because it uses QT codecs for video and audio.
Does QT open OK? If not, uninstall it using Control Panel > ADd/Delete Programs. Then install the standalone version. More detail:
http://support.apple.com/kb/TS1371

Exporting Prores 422(HQ) Quicktime error -50

I've been having trouble with this particular file, both in Compressor 3 and 3.5
We're trying to run movie through, and we're getting a quicktime error -50 each and every time. The input is a 1920x1080 59.94i film. We're trying to use compressor to Inverse Telecine the film to 23.98 Prores 1920x1080 progressive. We've had this work with many other projects, but this one just craps out after a couple minutes.
has anyone seen this? could it be something like permissions or something? The file seems just fine.

To the best of my knowledge, Compressor can't be used with i-apps. But it can be used within Final Cut Studio / apple's pro apps.
If you are working with film, I strongly recommend staying within apple's pro apps and not iMovie or iDvd.
(not sure if roxio's toast can address this feature or not but it might also be worth looking into).
Hope this advice is helpful but if not just come on back.
Message was edited by: SDMacuser

Can't export from FCPX!! (error -1)

Hi, I'm running FCPX 10.0.8 on a late 2012 iMac and I've got to get an edit out urgently for the client but I keep getting an error every time I try to export. I can't do anything with this video if I can't export it!!! I need help urgently.
I get the following message as attached:
The share operation Master File has failed.
The operation could not be completed because an error occurred when creating frame 1328 (error -1).
It's 1440X1080 ProRes 422 original footage AVCHD.
Any help on this?! It's urgent!
Btw I've already located frame 1328 and removed the clip that starts there. Still fails. Also tried copy/pasting it into new project and rendering it all again. Still fails.
Many thaks

Hi saddact,
I, along with many others are having the same problem. I am days behind on delivery of of a master disk for a client and thanks to FCPX 10.0.8, I have not been able to. I am currently "sharing" a masterfile and as of now it is working, I am at 73% . . .
First duplicated file, then the below . . .
Here is what seems to be working for me (fingers crossed):
Settings in Preferences set to under Playback / background render unchecked, under Destinations / Masterfile codec ProRes 422, . . .
Well forget that, just failed!!! "encoding frame error" one of many I have seen over the last few days!!!
I was able to export a codec set to H.264 last night, maybe I try that again.
Well I did not try deleting preferences this last time . . . try that along with the above.
Come on, lets get the updates right BEFORE releasing them.

Can't Export from FCE to QuickTime Movie w/o recompression

I have problems with choosing the correct settings for export of a FCE video clip to QuickTime Movie. I want the best possible quality (without recompression).
In the manual it says:
"Exporting a Self-Contained Movie Without Recompressing the Media
If you choose to export a self-contained movie, you have the option to not recompress the media in your clip or sequence. If you deselect the Recompress All Frames option and choose Current Settings from the Setting pop-up menu, Final Cut Express simply copies frames from existing media files into the new file with no recompression."
I can't find that option in FCE 4.01 - is it a mistake in the manual? My source media was captured from miniDV tape and the captured media file has the following formate:
Codec: DV/DVCPRO - NTSC, Linear PCM, Timecode
Color profile: SD (6-1-6)
Total bit rate: 29,794
My exported file has this format:
Dimensions: 720 x 480
Codec: Linear PCM, H.264
Color Profile: SD (6-1-6)
Audio Channels: 2
Total bit rate: 2,151
I have seen this question in the FCE archive and people simply say there is no recompression in FCE Export to QT Movie, but clearly there is since I see the H.264 codec listed in my output file and the bit-rate is a about 1/14th the rate of the original source material. The output file size is also much smaller. What gives. How can I get an unrecompressed file out of FCE so I can send it to a coworker for futher editing with his FCE.

dsut56 wrote:
Does anyone else have anything to add to this thread. I'm, sure I'm using Export to QuickTime Movie and not using QuickTime Conversion and from the file specifications I've given above, it is clear that a 14:1 compression took place.
Doug
Double check:
There are only three options in the QuickTime Movie export window.
1. Include: The Audio and Video, Audio Only or Video Only.
2. Markers: Select whateve you want or don't want.
3. The Make Movie Self-Contained selection check box.
Is this what you see?
The export will mirror the Sequence or selected part of the Sequence.
Al

How can I export a slideshow as Quicktime video in iPhoto 9.5.1?

I want to export a slideshow I created in iPhoto 9.5.1 as a Quicktime video, but neither File > Export nor the Export button at the bottom give me a Custom Export option. I believe this was an option in older versions of iPhoto. Thanks in advance!

iPhoto 9.5.1 no longer can export as a QuickTime movie.
You will have to convert the exported video file to add a QuickTime wrapper. Try to save a QuickTime movie from QuickTime 7. (download here: QuickTime Player 7 for Mac OS X v10.6.3 or later.)

ITunes can't install due to old Quicktime installation

I'm trying to install iTunes on my teachers laptop for her- she's a technophobe but has bought a new Shuffle for her husband. I go to install, and it throws and error at me saying 'Cannot due to old version of Quicktime'. There were 3 version- Ive managed to ditch two, but one simply won't uninstall as it says that a certain system file is being used by another application. I'll try and get the file path if I can.
It;s a school laptop and they're set up by trained monkeys, they're so ungodly slow and badly set up. So, any suggestions?

When I get the chance, I'll probably try and boot the PC in safe mode and see if that'll take care of it. If this doesn't work, any other ideas?

Can't export to mpeg2 in quicktime anymore

I am using Final Cut Pro 5.04 and Quicktime 7.1.3. I captured some video recently and went to export using Quicktime conversion like I always do and the mpeg2 option was not available. has this been removed and am I forced to use compressor now? Can someone tell me why this is a good thing?
Also, is FCP 5.1 available for power PCs, or is that just an Intel Mac version?
Thanks

is 5.1 available for PPCs?<<</div>
Yes. FCP 5.1 (universal version) is a paid up/crossgrade. See http://www.apple.com/universal/crossgrade for details.
-DH

Can't export my iMovie to Quicktime in the right size.

When I share my file to a quicktime format,"CD-Rom" I get a 20Mb file and when I share it to "Full-Quality" I get a 1,3Gb file. I need to export a file that would weight about 700Mb. Should I use "Expert- Setting", if yes, what settings in it because I have tried but the estimated time had gone over 250mns.
Ps: The imovie project is 2mns 40s.
Thanks alot

Sean:
Don't know if it will help, but....
iMovie: How to Save Projects to Another Hard Disk
http://docs.info.apple.com/article.html?artnum=93296
Sue:)

What is error code =-50? how can I export my project when this error arrives?

what is error code=-50? How can I resolve this issue to be able to burn my project to a disc?
Thanks!

Hello Russ,
I have FPC X 10.1.3 and Yosemite. Thanks for your concern but i solved my problem. I created new library and copied event in new library.
Everything is back to normal now. The share button lives again.
kindest regards

The Share Operation Export File has failed QuickTime Error -50

Hi, i've been trying 6 times or more to export a file from FCPX. I have done this many times but now it's failing with the above error. I have nearly 300GB of space on my drive. Any solutions?

This video had something like 30 powerpoint slides (jpegs) added and this is obviously a problem because as soon as i removed them it worked fine. Not sure what the limit is but will have to experiment. thanks for your help.

I can't export due to a quicktime error!

Similar Messages

Maybe you are looking for