I can't find a particular album on my ipod, yet it appears on my computer ipod both in albums and playlists (thought a playlist of the album would shortcut the search). Any thoughts on how to fix this?
I have put a few audiobooks on my ITunes and wanted to play them on my ipod. However, they don't come up either my artist or album lists, despite appearing to be present when I look at them on the computer ITunes. I tried to make them easier to find by making a playlist, but the problem remains - present on the computer but not there on my ipod. Its like they are invisible on my ipod!
Has anyone come across this sort of problem before? How can I fix it?
I don't know if it's considered a problem, I think it's just part of the design of the program. Some might consider it a flaw in the design. But at least you've found a workaround.
You could submit your feedback to Apple here:
http://www.apple.com/feedback/itunesapp.html
Similar Messages
-
I am having trouble with iMessage being activated. It has worked up until yesterday and now won't activate and is saying no address in the send and receive section. My number is there but not ticked. Any suggestions on how to fix this? I have shut down my phone, but still no luck!
iMessage and FaceTime went down yesterday for some people. Mine is still down. My iMessage is saying the same thing about being activated. Sounds like you are still down too. Ignore the status page that says everything is fine - it lies.
-
I updated to 10.6.8 and now my VPN connection is unstable. It has lost the connection to the host after 30 minutes on three different occasions. Before updating, I was able to be connected for hours with no interruption.
The error reads: "A configuration error occurred. Verify your settings and try reconnecting."
Adding to the problem is that the problem only corrects itself after I restart my computer.
Is anyone else having this problem? Is there a fix I should be looking for?
Thanks!I'm sorry I didn't post back earlier, I haven't been using my VPN lately. However, today, I did use it for hours and the problem persisted exactly as explained. I did some more searching and found the following solution on a similar thread. Worked like a charm:
the vpn daemon has to be restarted. after that it works perfectly.
1. Open Terminal
2. Unload the VPN daemon using the following command (for those who don't know, don't include the % sign when typing in Terminal):
% sudo launchctl unload /System/Library/LaunchDaemons/com.apple.racoon.plist
Note: After you type the command in, Terminal will give you a warning and ask you if you want to continue. Enter your password and continue.
3. Reload the VPN daemon in Terminal (again, not typing the % sign) :
% sudo launchctl load /System/Library/LaunchDaemons/com.apple.racoon.plist
That should do it! Thank you to everyone who tried to help me. Hopefully this helps others out there...
P.S. For those that are unfamiliar with terminal. When you type in the commands, that's not a hard return in there before the path /System/Library... etc. The line break is just because the path is too long to fit on that line.
See the other person's VPN problem thread here:
https://discussions.apple.com/thread/3173994?start=0&tstart=0 -
After moving to iCloud I can only get my email through the cloud, no new emails are making it to my home computer and .mac account. Does anyone have any advice on how to fix this issue?
Welcome to the Apple Community.
Which OS are you using. -
I downloaded a song from i-tunes. It plays on my computer, but won't play on my i-phone. Any suggestions on how to fix this? Or how can I re-download the song without getting charged a second time. I could not find an option to "report a problem".
I could not find an option to "report a problem".
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.) -
I keep getting the error that says: "APSDAEMON.exe cannot open since itunes can't find the msvcr80.dll file. Any assistance on how to fix this is greatly appreciated.
Click here and follow the instructions.
(98703) -
I have a 16GM Mini IPad. The screen won't swipe. I tried resetting it but that didn't work. I attempted to connect to ITunes to try a restore but I can't do that. This is because the IPad is locked with a pass code which I can't enter because I can't swipe. Does anyone have any suggestions on how to fix this?
If Ralph's suggestion doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this. -
My Iphone 4 has been stuck on a loading symbol for a week now, I've plugged it into the computer but can't do anything still because it says I need to put my pass-code in, but I can't the screen is on loading still! Any ideas on how to fix this problem?
On the new laptop, launch iTunes. From the menu bar click Store / Authorize This Computer.
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer -
When updating to itune 10.5 I get this error message ,older version of bonjour can not be removed, and older version of apple mobile support cannot be removed, any one know how to fix this.
1) The older version of Bonjour can not be removed. Contact your technical support group.
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.) -
Can't synch iphone. Get message "synch server failed to synch the iphone. Anyone have any suggestions on how to fix this issue?
Windows 7
ios 7.1
iphone 5Hello, skifmli
Thank you for visiting Apple Support Communities.
I understand that you are unable to sync your iPhone and receive an error. I was start with restarting iTunes and your computer. Once this is done, test the results by attempting a sync. If the issue persists, go through the troubleshooting steps in the article below.
Troubleshooting Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010
Cheers,
Jason H. -
I have just today recieved a brand new iPod Touch 4th generation iPod with the latest update. Everything else on the ipod is working and my computer is able to read the camera fine, but iTunes cannot recognise it - even after restarting and trying different USB ports and cables. There is nothing at all coming up on the device list and iTunes is working as it would if I had no iPod plugged in. This is my first iPod on this computer and I have already tried redownloading iTunes. My computer is a windows XP computer. Does anyone have any idea on how to fix this problem?
Since this is an XP machine, which version of iTunes do you have installed? Is it the latest version?
Have you tried starting iTunes, attach the USB end of the cable, then while holding the home button on the iPod connect the 30-pin connector end of the cable to the iPod...that is the recovery mode but also should make iTunes see the iPod.
If that doesn't work you may need to take the iPod back and have it tested by the genius bar techs to make sure the connector is not bad. -
Any ideas of how to fix this?
sounds like a question for blackberry forum rather then ios forum..
-
My Iphone 5 won't show up in itunes on my computer? Any idea on how to fix this problem?
My Iphone 5 won't show up in itunes when i plug it into my windows 8 laptop but it shows up on my computer under devices and drivers as an iphone. Any idea on how to fix this problem so I can use my phone in itunes?
http://support.apple.com/kb/ts1538
-
MacBook 2008 wifi suddenly stopped working and says no wifi hardware. Took it to an apple shop, they said it could be the airport card but wouldn't do anymore then that.
Any help on how to fix this? How do I know if it is the airport card or not?
is there anything else I can try first?
thanksIf the technician at the shop is competent, he has given you a diagnosis that should have identified the problem. You could run the Apple Hardware Test to verify the findings:
https://support.apple.com/en-us/HT201257
Note the Apple Hardware Test is not definitive.
Go to the iFixit.com and Powerbookmedic.com web sites. They have parts and installation instructions. To install an Airport card is fairly easy.
Ciao. -
I had Acrobat Standard 9.5 on a laptop that broke. Adobe Acrobat Standard is paid for and all I need. I had to get a new PC (Windows 8.1) and I did downloaded Standard 9.5 but when I went to install it the installer gave me an “Error applying transforms please ensure specified transform paths are valid”. Any ideas on how to fix this?
Rahul,
No error numbers other than the message I mentioned previously.
I tried the transforms repair and it reported no Acrobat product (correct, none yet installed) or no administrative privileges (I am the administrator and have done previous administrative actions).
When I unzip the Acrobat file this is what is in the setup ini file:
[Startup]
RequireOS=Windows XP
RequireMSI=3.0
RequireIE=6.0.2600.0
[Product]
msi=AcroStan.msi
Languages=1033;1031;1036
1033=English (United States)
1031=German (Germany)
1036=French (France)
CmdLine=TRANSFORMS="AcroStan.mst"
[Windows XP]
PlatformID=2
MajorVersion=5
MinorVersion=1
ServicePackMajor=2
[MSI Updater]
Path=WindowsInstaller-KB893803-v2-x86.exe
Thoughts?
Thanks again,
Tom
Maybe you are looking for
-
How do import music purchased on my laptop to my iPad
I was finally able to locate ALL of my older music I had purchased from iTunes with my old PC laptop - and thankfully, I just downloaded all music onto a newer laptop .... BUT, after 10 months, we still have NO idea how to download my music onto new
-
Windows 8.1 Update - issues deploying printers via GPO from a 2012R2 Print Server
Hi, I am trying to deploy a single printer to Windows 8.1 clients in a K-12 environment. We have about 1200 laptops and about 25% of those laptops are installing the printer. Several different users can log on and the printer may or may not be there.
-
Can't use built in volume manager in PCMan File Manager
Trying to use the built in volume manager in PCMan FM causes 2 error messages to appear. They are unreadable (the title bar says "Unable t" that's it). An error like the one that follows appears in the the console (or whatever Eterm is) for each: (
-
Hi guys, for pop up window i need f4 help..... actually wt the task is if i give the program name, that program contents have to save in a text file... for that i need to specify the path ie., where i have to save the text file...
-
Can anybody point or give me a good document on Error handling (Monitoting and Alerting) Framework in XI. Thanks in advance. Mukesh