I can't find channels 3-6 on garageband

Hey everyone,
I am new to recording but I know kind of the basics of recording. I recently purchased a yamaha audio gram6. I started using it on garageband and I found out that the 1st  2 channels show up on the list in the drop down menu of input source. I don''t know how to record from channel 3 - 6; it doesn't show up anywhere.
Please advice.
The 1st  2 channels work perfectly but i can't seem to record from the other channels.

From a brief look at the Audiogram web page, I can see that it has 6 input channels, but not that it has 6 output channels - it looks to me that it mixes the inputs to a stereo signal, so your observation would make sense.

Similar Messages

  • Audio plugins where can I find them in the new garageband

    Looking for the plugins and vst's and can't find them any clue? anyone?

    Fanatikpro wrote:
    Looking for the AU plugins and vst's and can't find them
    http://www.bulletsandbones.com/GB/GBFAQ.html#gbv10audiounit
    (Let the page FULLY load. The link to your answer is at the top of your screen)
    (GB has never supported vst plug-ins, only AudioUnit (AU))

  • Can't find channel lineup for Motorola DCT700 Set top Adapter

    I have two DVRs and a Motorola DCT7000 Digital Set Top Adapter in my house.  I can use Verizon's web site as well as the on-screen menus to find the channel lineups for the DVRs, but the channels on the Digital Set Top Adapter (little grey box) do not match the published channels.  Is there an alternate lineup somewhere?  (For example, PBS is on channel 22 and Comedy Central is on channel 1644!)
    Thanks,
    Mike

    The DCT700 should have all the SD channels in the the same place as the full featured boxes, it just doesn't support any HD, VOD, PPV, or have a guide.
    For instance, Comedy Central should be on channel 190 (SD version).  The 1644 channel you referenced is most likel.y a duplicate (mapping olnly - not a duplicate of the channel) for the Spanish language package (or some other foreign language package even though it may be in English).
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • How can one find out who made the Garageband song 'For the Mind'

    I ask because I have believed for 5 years that I did, it is in my projects folder from 2004. On Saturday I was playing with a new Apple laptop at JB Hi-Fi, I opened the Garageband folder and saw 'For the Mind'. I got a shock, then when I played it I went cold as it was as exactly my version! Either (and this is always a possibility) I am delusional, or I remember uploading a few things in my early use of Garageband, and somehow Apple has paid me a huge compliment and used my project as an example. I would love to know about this, it is driving me crazy now that I don't know. Can anyone shed any light on this please?

    Please don't rant at people who are trying to help you. I can tell my own compositions from others', and I'm not paranoid enough to suspect Apple to secretly search my hard drive for songs they can steal and publish as their own.
    (And you still haven't answered my question as to how you think they got your song ...)

  • Can't find 3rd party plugins in Garageband???

    I've downloaded several plugins via MacMusic. I've followed the instructions and dragged the plugins into Library-Audio-Plugins-Components. Then I start Garageband, but the plugins are no where to be found (did check in AU effects pull-down menu). How do I get them into Garageband?
    -Tom

    3 < 6
    And it doesn't let you use an arbitrary 3 (6) AUs, only 3 of its own effects.
    _<b>I_ still want to use multiple effects of my choice... and this is a doable project ... unfortunately above my skill level as a programmer B-(>
    But still, as my friend Christoph points out, there is an AU that will let you use 3 effects, per slot, at a time, search for "LFX-1310". I believe it is still PPC only, but I haven't checked recently to see if there is an update.

  • MythTV can't find DVB-T channels with HVR-4000. Kaffeine works great.

    I just buyed a Hauppauge HVR-4000 for DVB-T (by now, later DVB-S too).
    I followed this guides:
    http://wiki.archlinux.org/index.php/MythTV_HOWTO
    http://linuxtv.org/wiki/index.php/Haupp … V-HVR-4000
    The DVB-S is "/dev/dvb/adapter0/frontend0"
    The DVB-T is "/dev/dvb/adapter0/frontend1"
    As wrote here: http://linuxtv.org/wiki/index.php/Haupp … V-HVR-4000, i made a link from "/dev/dvb/adapter0/frontend1" to "/dev/dvb/adapter1/frontend0" so that MythTV can detect my DVB-T decoder (works), but still can't find any channels on DVB-T adapter.
    Kaffeine find all existing channels and plays them fine (good image and sound).
    I tried analogue TV too with following devices:
    /dev/video -> /dev/video0
    /dev/v4l/by-path/pci-0000:01:01.0-video-index0
    /dev/v4l/by-path/pci-0000:01:01.0-video-index1
    but he can't find channels too (TV Time can).
    My sys:
    Archlinux with Kernel 2.6.30, MythTV 0.21.
    ¿Anybody knows whats wrong here?

    did you try to import the channels.conf from "scan /usr/share/dvb/dvb-t/whatever > channels.conf" instead let myth scan channels for you.

  • I changed the channel on my Belkin Wireless router now my ipod touch 1G can't find my wifi network?

    A few hours ago I changed the channel on my Belkin Wireless router for the 1st time. It was either on auto, or channel 6 before, i'm not sure, but I changed it to 11, and now my ipod touch 1G can't find my wifi network. I tried changing it to 6, but nothing, and I also can't go back to auto. Can someone please help. I've already searched for the network, and it says "Cant find network". I've also restarted my router. I also added the MAC address, still nothing. Other than those things, I havent touched anything else. My ipod could connect before just find. My Wifi is not disabled, and it's not on private. I can connect with other wifi's fine. And I can connect to other networks with my ipod, I also held down the button on top, and the home button for 10 seconds to restart and nothing. I also reset my network settings. Please help!

    Find the documentation for your router and look up "Reset to Factory Defaults."  This process will put the router back to the way it was when you bought it.

  • Can't get my epson sx535wd to work. my epson will get contact with my router (sitcom wl306) and my mac is on wifi, but they can't connect. epson can't find the computer and my report says: there are conflicting channels on my router or entry point. help

    can't get my epson sx535wd to work. my epson will get contact with my router (sitcom wl306) and my mac is on wifi, but they can't connect. epson can't find the computer and my report says: there are conflicting channels on my router or entry point. please help

    OK, let's try these................ 
    1 - Boot up from your install DVD and run "Repair Disk" from the Utility menu.  When done, restart back to your desktop, repair permissions and restart your computer.  Re-connect your printer. 
    2 - Download & install the Gimp drivers. Make sure the one you install is compatible w/your OS-Gutenprint 5.2.8-pre1.   Repair permissions, restart your computer & re-connect your printer when done.
    The Epson model I have, in order to get it to print wirelessly, I had to install a Gimp driver.
    3 - Check out the following KB Articles:
    Mac OS X 10.4 Help: Connecting to a network printer
    Epson Printer Drivers v2.10 OS X
    Adding a printer to your printer list in Mac OS X
    Mac OS X 10.4 Help: The printer I'm adding says "Driver not installed"
    ======================
    If still unsuccessful after trying all of the above, the problem could be your iBook or human error.  You can either call Epson & ask to speak with a Mac savy supervisor or return the printer & find another that is compatible w/your current OS.

  • How can I find the specific channel name and modify channel name in automatically in VBS?

    How can I find the specific channel name and modify channel name in automatically in VBS? (DIAdem 9.1)
    I would like to change channel name = "speed01" ... "speed10"  to  channel name = "velocity01"..."velocity10.
    martino

    Hello Martino,
    this script will help:
    Option Explicit
    Dim i
    Dim n
    For i=1 To 10
    If i < 10 then
    n = CNo("speed0" & i)
    Else
    n = CNo("speed" & i)
    End If
    If n > 0 Then
    If i < 10 then
    ChnName(n) = "velocitiy0" & i
    Else
    ChnName(n) = "velocitiy" & i
    End If
    End If
    Next
    Matthias
    Matthias Alleweldt
    Project Engineer / Projektingenieur
    Twigeater?  

  • I can't find the Disney junior channel on my Apple TV

    I can't find the Disney junior channel on my Apple TV. I have the other two Disney apps, but not Junior. Why? How do I fix?
    I see online that it was added in Sept as a channel  but I can't find it. I have only 25 total channels and my software is up to date. TIA!

    iTunes, you must Update or Restore the Firmware to iOS 5.1.1 the first time (to system 5) with iTunes. After that you can update via the Air.

  • Can't find the adapters in communication channel

    Hi
    I can't find the adapters in communication channel , on hunting the sdn i could find the below soln :
    To rectify this you must import the BASIS SWCV 7.0 into the Integration repository.
    can any body give me step by step for importing in the integration repository.
    rgds
    shazia

    Hi,
    First do SLDCHECK in XI ABAP Stack, then if it has errors means follow this help file
    http://help.sap.com/saphelp_nw04s/helpdata/en/78/20244134a56532e10000000a1550b0/frameset.htm
    If SLDCHECK is working fine means,
    Try to re-import the BASIS SWC into IR againg, then only you will be able to see the list of adapters in the list..
    Regards
    Seshagiri

  • Digital TV can't find any channels with FIOS

    My digital TV does not use a set top box. I used to be able to scan the channels and pick up the local ones, but now I get nothing. Is there a problem because of the switch over to all digital? Makes no sense since FIOS has always been digital.

    sgip2000 wrote:
    And even if your TV has a QAM tuner, the channels are not mapped properly.  Your locals could be at 94.129-133 for example.
    Depends on the brand.  My Sharp Aquos maps all the local HD (OTA) channels correctly by the PSIP information (3.1, 6.1, etc.).  Local SD channels will not be mapped as they don't have PSIP headers.  Some brands still have trouble with Verizon's PSIP information and either don't map or totally choke and can't find any of the local HD stations.  Verizon fixed an issue almost a year ago that caused my Sharp to not be able to tune any of the local HD stations for nearly 9 months - either at their mapped location or their QAM channel (70.x to 75.x in my area)
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • Where can I find my favorite radio channel on app store?

    Allo,
    Where can i find my favorite radio channel on app store?

    Not all radio stations offer their own apps - in fact relatively few do - so if a simple seach for the station name doesn't turn up an app, contact the station you wish to listen to and ask if they offer an Internet stream at all and if so if there's is any app(s) that can play that stream.
    Regards.

  • A85XA-G65 can't find option to enable dual channel memory mode

    Hi,
    My system is new build.
    Specs:
    MSI A85XA-G65
    AMD A10-5800K Black Edition 3.80GHz (Socket FM2) APU Trinity
    Crucial Ballistix Sport 8GB (2x4GB) DDR3 PC3-12800C9 1600MHz Dual Channel Kit
    Corsair Force GT 120GB (system drive)
    PSU OCZ ZT 550W
    Win 7 64-bit
    Problem: UEFI showing 8Gb memory but only 4Gb physical memory showing when SiSandra used and in Windows.
    I can't find the option to enable dual channel memory mode. Slots populated are DIMM1 and DIMM3. When DIMM 2 and 4 are populated it will not boot (no dsiplay). I can easily switch between DIMM 1 and 3 in control centre for UEFI but I am unable to switch to dual channel mode no matter what i try.
    Any ideas?

    For dual channel to work DIMM 2 & 4 must be populated. It won't work with 1 & 3.  Try with one stick and set timings and speed according to the sticks' specifiactions in the oc section of your bios then retry with dimm 2 & 4. If no help try slower timings like 10-10-10-28-2T

  • Macbook pro can´t find/connect to my hotspot

    Dear experts!
    I recently moved to a new place and got myself a T-Mobile HomeNet Router. Everything works fine (WiFi and Ethernet) with all devices (iPhone, iPad, iMac, Linux-machine...) EXCEPT my MacBook Pro (specs below in the product section) :-(
    Ever since I moved the Macbook can´t find or connect to my home hotspot. Settings on the router are as follows:
    - 802.1 b/g (it IS capable of b/g/n but I found a thread somewhere pointing out that this could be an issue)
    - channel 13 (deactived auto-channel because my neighbours had overlapping channel settings...this was the only one that worked)
    - rate auto
    - frequency 2.4 GHz
    - 30% signal strength (same reason as above)
    - QoS activated
    - SSID hidden (tried broadcasting it, made no difference)
    - WPA2-PSK
    - AES (TKIP and TKIP+AES available as well...but neither made any difference)
    I can connect via ethernet, however that´s not the intended purpose of neither my notebook nor the router :-/ Someone suggested it might be an encryption issue but even without  ANY encryption the hotspot won´t show up in the list. Password contains special characters but even my old iMac doesn´t seem to have problems with it. I tried connecting manually via &quot;other network&quot; without success. Also via Controlpanel -> Network -> Assist me ...
    I´m sitting right next to my router so the signal strength can´t be the cause either (besides all other devices work just fine anywhere in my appartement). Restarted all devices, each one is up to date. Last thing I tried was making the changes in Firefox cause someone suggested it might be a bug in the router software, still no success.....I´m out of ideas.
    Posted this in another Mac forum already but no one could help me :-( You guys are my last hope ... does anyone know this issue and how to solve it??
    any ideas would be greatly appreciated!
    many thanks in advance
    tchintchie

    nevermind...here´s what solved it for me:
    https://discussions.apple.com/docs/DOC-3411

Maybe you are looking for

  • When hitting enter on some web pages(after entering information), the page just reloads. How can I fix this? It worked before, but no longer does.

    When I go to certain web sites, and enter in my information(like my Bank website), I hit enter, and the page just reloads. Or when I finish making a post to my blog, and I hit "Post Entry", the page just reloads. I did not have this problem until a f

  • Error in reporting

    Hii All, While running our consignment report i am getting following error. System error in program SAPLRSDRC and form NCUM_HANDLE When i double click on it shows me Diagnosis This internal error is a targeted termination since the program has an inc

  • Adobe reader not opening

    When I open Adobe reader it is showing " Windows can't find 'C:\Program Files\Adobe\Reader 11.0\Reader\AcroRd32.exe. Make sure you type the name correctly. The same message appear when I click any PDF document. Please suggest me how to resolve. My co

  • Hanasvr-02 down?

    Hi, is there anybody working on above server? I could connect this morning but since then it is not possible to connect anymore. Support doesn't answer thanks for your help. Markus

  • Thunderbolt display video died-Cable problem??

    My TD (paired with a Retina) video seems to have lost its video.  Audio working fine.  Could this be a cable problem?