I can't find document setup under file in CS5. Help!

I've looked everywhere...even in the Keyboard Shortcuts and menus, and it is not hidden. It is nowhere to be found. Help!

I dont know what specific settings you are looking for under the "old document setup", but here is a few options with the NEW look of CS5/CS6:
To create a new document completely:
File >New
or:
under Image> Image size:
you can alter the size of the image you opened in Photoshop, as well as the document size.
or:
under image>canvas size, you can expand the canvas to a new size.
I hope this is what you were looking for, if not just reply here to this post about a specific setting you seem to be missing.
-janelle

Similar Messages

Currently use acrobat 6. getting box that states: can't find adobe pdf resource files... need help

Getting a box that states: can't find
adobe pdf resource files... need help!!!

I get a similar error, but only under the following conditions: I must be printing to the Adobe PDF printer and printing multiple pages, one at a time, and then it only happens on the second and subsequent print attempts. That is to say, the first page prints just fine and this just started yesterday afternoon. The specific file referenced in the error does not exist, but why would it work the first time and not the second? Since it only started yesterday, I tried uninstalling and reinstalling this morning, but it made no difference. I don't see anything under print properties like job-options and it is a single user, unshared printer. Thoughts? I understand the same thing is happening in at least one other of our locations, but no one there has looked into it yet. This is a BIG problem for me, however, and I need to find an answer quickly.

I can't find where iweb saves files. i have no iweb folder in my library applications. any ideas?

i can't find where iweb saves files. i have no iweb folder in my library applications. any ideas?

Yes you do - it is found under your User Library/Application Support/iWeb/domain.sites.
It is the domain.sites folder that you want and the iWeb folder is NOT in your System Library, but rather your User Library - that's the one with the house.
Depending on what OS you are using - from Lion upwards, your User Library is invisible, so to make it visible, go to the Go menu and hold down the 'alt' key at the same time and your Library will show - then go to Application Support and the iWeb folder is there with your domain.sites file in it. Double click on this file to open it and iWeb will.

Where can I find a list of file types that Iphone can open?

where can I find a list of file types that Iphone can open please?

http://www.apple.com/iphone/specs.html
Viewable document types: .jpg, .tiff, .gif (images); .doc and .docx (Microsoft Word); .htm and .html (web pages); .key (Keynote); .numbers (Numbers); .pages (Pages); .pdf (Preview and Adobe Acrobat); .ppt and .pptx (Microsoft PowerPoint); .txt (text); .rtf (rich text format); .vcf (contact information); .xls and .xlsx (Microsoft Excel)
TV and video
* Video formats supported: H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
* Support for 1024 by 768 pixels with Dock Connector to VGA Adapter; 576p and 480p with Apple Component AV Cable; 576i and 480i with Apple Composite AV Cable (cables sold separately)
Message was edited by: DaVBMan

HT1222 When I try to install iTunes 10.7 it says it can't find the iTune64.msi file. I can't seem to find a replacement download for that file.

I have ITunes installed on my PC which runs Windows Vista in support of my IPad. When I try to install the update for ITunes 10.7 version, it says it can't find the "itunes64.msi" file. How do I correct this, or where can I find a download for the itunes64.msi file?

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get aCode 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Have been using successfully Acrobat 8 Standard, version 8.3.1 for years. Suddenly can not digitally sign anything because software can not find "existing digital ID file?

Have been using successfully Acrobat 8 Standard, version 8.3.1 for years. Suddenly can not digitally sign anything because software can not find "existing digital ID file?

Are you still using Acrobat 8? If not read further.
All Acrobat versions prior to 11.0.07 had a security flaw that they allows signing with certificates that had "Extended Key Usage" (EKU) restricted to certain certificate uses and those did not include document signing. Most frequently those were certificates with "Client Auth" or "Server Auth" in EKU. Acrobat/Reader 11.0.07 fixed this problem, which also means that while previous versions accepted such certificates for signing 11.0.07 and later do not.

Can't find navhztlddmenufuncs.js under imageserver\plumtree\portal\private\js

Can't find navhztlddmenufuncs.js under imageserver\plumtree\portal\private\js. Where should i get it from?
Thanks

This message is occuring because you are using a version of ASP.NET which is newer than was available at the time of the 2.1 Web Controls release (1.1SP1). Normally this portlet would not function, however I expect you have another portlet on the page which is running in an older version so it is using the older includes (which are fine in this case).
What you need to do is generate a WebUIValidation.js for the newer framework. You can do this by going to your portlet server and running JSGenerator.exe (located in plumtree\ptwc\2.1\bin) - this should detect the new framework (1.1.4322.2032), so select this. Then click generate - it will generate a new WebUIValidation.js file & tell you where to put it. I believe this should also be covered in the documentation with the web controls.

My Macbook Pro can't find any of my files!

Hi there,
Since yesterday, my Mac suddenly can't find any of my files anymore. All the folders are there, but all the files are missing. There are 2 big question marks on the top of the finder window and when I click on them it says that files cannot be found. I have no clue what to do now. The only thing I did before this happened, was deleting my downloads folder, but nothing more. It's weird that all the folders are visible but the content not. Anyone experienced this too? What can one do in a case like this?
Thank you for any help!
Raphaela

Did you run a disk check on it? You might have data corruption. The big question mark on the top of the finder window, I believe is a short cut, not the actual file. Did the actual file move? Did you rename the file? Did you change anything, like your username? Did KIDS use your machine? KIDS can do some silly stuff to your computer without even realizing it. I know this option may sound OFF BASE, but do you have a faulty trackpad, or use excessive hand lotion? (I have seen both of these cause undesired file moves, renames, etc...)
I would run a disk check, and if available, use Disk Warrior, Drive Genius or similar to rebuild the directory.
If that does not help, I would search for the file using Spotlight, or a 3rd party app like Find Any File.

I can't find most of my files for the songs in my iTunes library and so cannot Sync them with my iPhone, Help please

Help please! When I try to sync my iPhone it tells me it can't find most of my files for the songs in my iTunes library, although the songs are there!!

Can anyone help?

How do I install Netgear XE102 on my iMac? It will not install off of the cd provided it appears to be only for Windows based computers. Checked Netgear website and could not find a setup.exe file for Mac.

Unable to install Netgear XE102 on my iMac. Checked Netgear website and could not find a setup.exe file for Mac.

That means either no software needs to be installed on a Mac or the product is incompatible with Macs. Contact NetGear tech support for help.

Can't find library (xml, itl) files

Hi,
I can't find the library database files (*.xml, *.itl) that are supposed to be in the ..My Music/itunes folder. I use Explorer to look at the itunes folder (which does exist in the My Music folder -- all my music files are in the My Music folder), but it shows no files. Also reports that the itunes folder is empty. I have used the View option tab to tell Explorer to show hidden and system files.
What seems strange is that iTunes works just fine. I can see and play all my music, it has all my playlists, etc. My understanding is that info is all in the databases, but I can't find them!
Another odd thing, when I click on the ../My Music/iTunes folder in explorer it takes several minutes with the hourglass icon before it actually opens.
Searching the discussion forums, I see that I could export the .xml file and then use it to recreate the .itl file. I think that some info is lost when you do this -- such as play counts and date added. In anycase, I'm reluctant to do this since everything seems to be working just fine. I would however like to know where the database files are!
Any thoughts?
Dell Windows XP Pro

Well, I bit the bullet and exported my library from itunes into a different location, moved the existing iTunes folder out of My Music, restarted iTunes, imported the saved xml library, and it looks like everything is fine. My library and playlists show up fine in iTunes, and the two library database files now appear in the iTunes folder in My Music. Can't really say what happened, but looks like this fixed it.

Hi I shoot on a canon 5d mk11 and I record my audio on an external device yet when I open up my footage in final cut pro x I can't find my external audio files only the ones attached to the clip which are off the camera mic

I shoot on a canon 5d mk11 and I record my audio on an external device yet when I open up my footage in final cut pro x I can't find my external audio files only the ones attached to the clip which are off the camera mic

What device?
What format?
How are you importing it?
Can you find the external audio with Finder?
Where is your destination file when you import it?
Andy

Where can I find the latest cab file?

Where can I find the latest cab file? for example:
CODEBASE=http://java.sun.com/update/1.5.0/jinstall-1_5_0_05-windows-i586.cab
CLASSID=clsid:5852F5ED-8BF4-11D4-A245-0080C6F74284 It is not available on this page: http://java.com/en/download/manual.jsp
I am deploying using web start. So I need it.
thanks,
Anil

Download Java EE SDK, install it and finally in the lib directory you'll find the javaee.jar. It contains the whole javax package you need.

Where can I find the a downloaded file by Software update?

Where can I find the a downloaded file by Software update?
For example is there any way to find a package which is downloaded but is not installed(because the installation failed) (in this case 10.5.5) and I don't want to download it once again neither manually nor with software update.

sina_golesorkhi wrote:
Where can I find the a downloaded file by Software update?
In ~/Downloads
For example is there any way to find a package which is downloaded but is not installed(because the installation failed) (in this case 10.5.5)
Failed installs usually remove the package, just as a proper install removes the package
All that remains for a proper installation is a Receipt in on of the following directories:
~/Library/Receipts (for user-specific installs)
Macintosh HD/Library/Receipts
for system-wide installations, including OS-X updates.
and I don't want to download it once again neither manually nor with software update.
If it did not install, there is no Receipt and the downloaded file is not on your system
If you don't want to see it again in automatic updates, put it on ignore.

My iPad is filling up my PowerBook hard disk. Where can I find the sync Photo file to delete it ?

Hi
My iPad is filling up my PowerBook hard disk. Where can I find the sync Photo file to delete it ?
Copying over photos via iTunes/iPhoto - there is a back-up file created (I can not turn it off) and it's now filling my PB-Pro.
So I need to find it and trash it and start over.
- Where is it located ?
- What is it's name ?
Yours Bengt W

Thank You
I found my iPhoto library
ctrl-clicked on it and opened package/content
here I found the iPod photo cashe folder
copyed this to a safe hard disk
then deleting it's content
and my memory/free space on boot drive is back
So I hope all's well.
Yours Bengt W

I can't find document setup under file in CS5. Help!

Similar Messages

Maybe you are looking for