I can't find IX2 in Windows 8.1 Network

I guys, I've been installed Windows 8.1 my brand new Lenovo IX2 was working so far so good, but, after a few day it was desappear from the network. I do not change any parameter  from IX2 or Windows. it's accesible from the browser going to IX2, also the Media Center is recognized by the PC and SmartTV but from the Windows Explorer not. This issue is drive me crazy!!! please could you help me? I spend the last tree days trying to find a way. Regards Mariano 

Hi Gus Lenovo, my Answers bellow.
1.What happens if you enter the IP address into your browser's URL? A: Accesing throught a brawser like Chrome works fine. Going http://192.168.1.22/ or by the name http://ix2/ I've access to the LenovoEMC-IX2 web interface.
2.You can access the user interface? A: Yes. And also login without issues.
3.Can you please verify the ix2's current IP address in your ARP table. A:
Microsoft Windows [Versión 6.3.9600]
(c) 2013 Microsoft Corporation. Todos los derechos reservados.
C:\Users\MarianoC>arp -a
Interfaz: 192.168.1.10 --- 0xc
Dirección de Internet Dirección física Tipo
192.168.1.1 e4-48-c7-c6-ff-49 dinámico
192.168.1.22 00-d0-b8-15-12-db dinámico
192.168.1.255 ff-ff-ff-ff-ff-ff estático
224.0.0.22 01-00-5e-00-00-16 estático
224.0.0.252 01-00-5e-00-00-fc estático
224.0.0.253 01-00-5e-00-00-fd estático
239.255.255.250 01-00-5e-7f-ff-fa estático
255.255.255.255 ff-ff-ff-ff-ff-ff estático
C:\Users\MarianoC>
4.Conversely, you could check the routing table on your router's control panel if you have access to it. A: Could you be more specific. This is what I've on the Network panel from my router Cisco DPC2325
LAN
IP Address: /
IP Network: 192.168.1.0
Decimal NetMask: 255.255.255.0
Broadcast: 192.168.1.255
WAN
IP Address: 190.105.110.169
Subnet Mask: 255.255.252.0
Gateway IP: 190.105.108.1
Duration: D: 00 H: 05 M: 00 S: 00
Expires: --- --- -- --:--:-- ----
IPv4 DNS Servers: 8.8.4.4
8.8.8.8
MAC Address: e4:48:c7:c6:ff:4a

Similar Messages

  • I have a 2009 macbook pro with os x10.9.2 and can't find drivers for windows

    i have a 2009 macbook pro with os x10.9.2 and can't find drivers for windows. i trying to install windows using bootcamp but does not allows me to download the drivers..

    From the system requirements page: http://support.apple.com/kb/HT5634 for your computer
    MacBook Pro
    (13-inch, Mid 2009)
    4
    4
    DVD
    DVD
    DVD
    MacBook Pro
    (15-inch, 2.53 GHz, Mid 2009)
    4
    4
    DVD
    DVD
    DVD
    MacBook Pro
    (15-inch, Mid 2009)
    4
    4
    DVD
    DVD
    DVD
    MacBook Pro
    (17-inch, Mid 2009)
    4
    4
    DVD
    DVD
    DVD
    MacBook Pro
    (17-inch, Early 2009)
    4
    4
    DVD
    DVD
    DVD
    The drivers are located on the OS DVD that came with your computer.

  • Satellite A135-S2276 - can't find drivers for Windows XP

    Hi! I can't find drivers for windows XP to this notebook. Do anyone know where I can find it?

    Hi stalker (what a crazy nic)
    The Satellite A135 is not known to me but it looks like the US model.
    Did you take a look on the Toshiba US website???
    Please check this link:
    http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp
    Its a Toshiba US driver download page.

  • I want to work with Creative Cloud -Libraries but I can`t find Libraries in Windows menu. What to do?

    I want to work with Creative Cloud -Libraries but I can`t find Libraries in Windows menu. What to do?

    Berit, please specify the OS version and software in which you are trying to find library?
    Make sure you your software is updated to the latest version. Try to reset the preference of the software as mentioned below:
    Photoshop Help | Preferences
    InDesign Help | Setting preferences
    Illustrator Help | Setting preferences
    Let us know if you are still not able to see Library panel in any specific software.
    Atul_Saini

  • Can't find application error window in Mac

    Often when I get an error requiring an acknowledgement, I can't find the window. I try docks/expose/etc... but can't find the window to acknowledge and get this "BOING" sound trying to click on the application window. For example, iPhone syncing with iTunes is having trouble, gives me an error message (and a verbal "iTunes" needs your attention)... BUT I can't find the acknowledgement window and end up force-quitting iTunes and restarting it instead.
    Please help a recovering PC user figure out how to bring forward the acknowledge window.

    Presumably the error dialog is hidden by other windows you have open. There are a few alternatives. You can locate the Dock icon for the application that generated the error. This should bring the current window forward which should be the error dialog. You can bring the application that produced the error forward then use the Windows menu to locate the error window and bring it forward. You can use COMMAND-` to cycle through all the open windows of the frontmost/active application. COMMAND-TAB will cycle through all open applications.

  • I can't find the Fonts window.

    The "help" document on formatting the text in a form using fonts mentions a font window, which it says can be accessed by clicking on "Show Fonts," which it says is buried under a popup menu named "Format," and can, in some programs, be accessed by clicking a button in either the toolbar or the settings panel.
    I can't find the font window.  Does this mean that the author the PDF disabled formatting?

    If you only have Adobe Reader, no, it doesn't mean that. Those instructions are for Adobe Acrobat.

  • Aspire V5-572G - No drivers for Windows 10 available. Can only find drivers for Windows 8.1

    Hi, I have upgraded my PC and have my touchpad is not working.Have search for new drivers for Windows 10, but there are no drivers for Windows 10 available. Can only find drivers for Windows 8.1 Please advice how I can solve my problem...

    There are Windows 10 drivers available: 
    AudioRealtekAudio Driver6.0.1.7553444.7 MB2015/07/28DownloadBluetoothAtherosBluetooth Driver (NFA222)10.0.1.059.2 MB2015/07/28DownloadBluetoothBroadcomBluetooth Driver12.0.1.65328.2 MB2015/07/28DownloadCardReaderRealtekCard Reader Driver10.0.10125.2127712.8 MB2015/07/27DownloadChipsetIntelChipset Driver10.1.1.72.7 MB2015/07/27DownloadIRSTIntelIRST (Intel® Rapid Start Technology) Driver14.5.0.108111.4 MB2015/07/27DownloadLanRealtekLAN Driver10.1.505.201512.5 MB2015/07/27DownloadMgmtEngineIntelME (Management Engine)Driver11.0.0.115360.7 MB2015/07/27DownloadTouchPadALPSTouchpad Driver8.100.2020.21260.7 MB2015/07/28DownloadTouchPadELANTECHTouchpad Driver15.6.0.388.8 MB2015/07/27DownloadTouchPadSynapticsTouchpad Driver19.0.9.4148.4 MB2015/07/28DownloadVGANVIDIAVGA Driver353.24649.5 MB2015/07/28DownloadWireless LANAtherosWireless LAN Driver (NFA222)10.0.0.31859.2 MB2015/07/28DownloadWireless LANBroadcomWireless LAN Driver7.35.267.044.5 MB2015/07/29Download

  • I just can't find my ip cam on the network....?

    i just can't find my ip cam on the network....? Its plugged directly to time capsule whoyh ethernet cabel. but nothing to find on my mac...?? its a sony sensor 2mp ip cam an i have iMac and time capsule and some iPhone and a hp printer on this network everything is working fine but i justb cant find the cam... please HELP :-)

    becourse i can find the ip and mac adress from the cam on my Dell Laptop running on Windows vista
    Is this setup as you described.. the camera plugged into the TC? Both Mac and PC plugged or on wireless from the TC?
    What exactly is the IP of the camera?
    What is the IP of the TC?
    When you say you cannot find the CAM on the TC what exactly are you expecting?? Nothing at all will show up from the CAM on the TC when you have it plugged in by ethernet.
    How do you open the IP camera to access its controls.. on the PC or does it use a special PC only software??is it just via a browser?
    Have you tried opening it via browswer in the Mac?? if the layout is as you described and you can open it from the PC then the Mac will work exactly the same.. but cheap CAMs will not have Mac software. So this will only work from a browser.
    butt on the Dell laptop i cant install airport tool? or can i ?
    Of course you can install the windows version of the airport utility.. how does this help you.. I think you do not understand that the TC is a dumb hard disk in a router.. it offers nothing for your network.. it will never be able to see the Camera.. it is not smart enough to do anything but save files from a computer.

  • I installed a new router from my ISP provider and now I can't find my Time Capsule or "Guest" network.  What do I need to do to correct this problem?

    I installed a new (and supposedly better & stronger) router from my ISP provider (Verizon) and now I can't find my Time Capsule or "Guest" network. 
    My Mac is not backing up because it can't find my Time Capsule network & my "Guest" network has also disappeared. 
    What do I need to do to correct this problem?

    You must reset the TC to factory and start over. The TC simply remembers too much from the previous setup to work in the new one.
    If your new router is going to take the router role, then the TC will have to be bridged and you will lose your Guest wireless.. the way around this is to use the Verizon router as your guest wireless and the TC as your main wireless.
    The Factory Reset Gen1-4.
    Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    Factory reset Gen 5
    Hold in reset for about 5sec until the status light flashes quickly.
    If your AirPort Time Capsule still doesn’t respond, do a similar reset to the Gen1-4.
    Unplug your AirPort Time Capsule .. hold in reset and power the TC back on.. without releasing the reset.. wait until status led flashes rapidly.

  • I can't find my time capsule or primary network. How can I recover it and connect to it again?

    I can't find my time capsule or primary network (only have access to my guest network)..it's simply not showing in Airport Extreme... I don't want to reset time capsule because I already have important data there.

    You must reset the TC to factory and start over. The TC simply remembers too much from the previous setup to work in the new one.
    If your new router is going to take the router role, then the TC will have to be bridged and you will lose your Guest wireless.. the way around this is to use the Verizon router as your guest wireless and the TC as your main wireless.
    The Factory Reset Gen1-4.
    Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    Factory reset Gen 5
    Hold in reset for about 5sec until the status light flashes quickly.
    If your AirPort Time Capsule still doesn’t respond, do a similar reset to the Gen1-4.
    Unplug your AirPort Time Capsule .. hold in reset and power the TC back on.. without releasing the reset.. wait until status led flashes rapidly.

  • Bootcamp Can't Find Drivers for Windows 7

    I have a Macbook with OS X 10.6.8. I have a 64 bit version of windows 7 that I want to bootcamp. Bootcamp assistant says it can't find the drivers it needs for windows. Any suggestions?

    Use OS X 10.6 DVD for drivers
    If you had an ISO of 7 x64 that you burned that can be an issue

  • Can't find services on Windows XP Pro

    My iPod touch 4th generation will connect to itunes, but there is a message that says "This iPod cannot be used because the Apple Mobile Device service is not started." Those are the exact words. So I searched for it on the apple website and came up with a diagnosis. The problem is, when I go to 'control panel' and under 'administrative tools' like I'm supposed to, I can't find 'services' which is what I need. I have a Windows XP Pro computer. Anybody have a clue about what I am supposed to do?
    This is an iPod that I have had for almost a year, but itunes recently emptied itself on me. I had to sync my iPod to get all my songs back onto the computer after that, and this is my first time trying to sync it after that.

    On your desk top screen right click "My Computer."
    Click "Manage"
    This should bring up the Computer Management snap-in.
    In the left hand pane click "Services and Applications," then click on "Services."
    If you cannot launch the Computer Management snap-in you may not have Administrator rights.  To get access you would need to log into an administrator account.

  • I can't find Actions in windows panel,i am using Adobe Photostop CS 6 version

    hii...i am using Photoshop CS6 version when i tried to open actions in windows panel i can't find it.can anyone help me ?

    There's an ability to hide menus in the Edit- Menus configuration panel.
    Maybe you should try resetting your preferences to defaults...
    Press and hold Control - Shift - Alt simultaneously (or Command - Shift - Option if on a Mac) immediately upon cold-starting Photoshop. If you get the keys down quickly enough - and you have to be really quick - it will prompt you to confirm deletion of your current preferences, which will lead to the establishment of a fresh default set. If it does not prompt you, you haven't been quick enough to get the keys down.
    Good luck.
    -Noel

  • Can't find mp4 Propertie window

    I have successfully ripped and encoded via MTR and MEPG Streamclip (took at least 8 hours - yikes). Now I need to change some of the file properties of the mp4 file in QT Pro, but I can't seem to find where that window is. Can someone help?

    I have successfully ripped and encoded via MTR and
    MEPG Streamclip (took at least 8 hours - yikes). Now
    I need to change some of the file properties of the
    mp4 file in QT Pro, but I can't seem to find where
    that window is. Can someone help?
    Window - Show Movie Properties. Double click each editable field.

  • Can't finde time machine (windows)

    I can't finde time machine at the internet to download to my windows computer.
    i already installed time capsule, but i could not find the time machine. what should i do?
    THX

    There is no Time Machine for Windows. You need to use a third-party product capable of backing up to network drives.
    (71687)

Maybe you are looking for