I can't find my Hifi speaker

I just installed airport express on my HP labtop. And it is working, the green light is on, and I can access the internet. But i can't get itunes to show my speakers. I have tried every advice from help.
Is there anyone who can help me?

Hello Skagen...Welcome to the Apple Discussions!
Let's double-check your AirPort Express Base Station's (AX) setup...
To set up AirTunes on the AirPort Express Base Station (AX), either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, use the AirPort Admin Utility to check these settings:
Music tab
- Enable AirTunes on this base station (checked)
- Enable AirTunes over the Ethernet port (optional)
- iTunes Speaker Name: <whatever you wish>
- iTunes Speaker Password (optional)
In iTunes:
iTunes > Preferences... > Advanced > General
- Look for remote speakers connected with AirTunes (checked)

Similar Messages

  • My eye pad Bluetooth cannot find my base speaker, My eye pad Bluetooth cannot find my base speaker

    Eye pad can't find Bluetooth Bose speaker. It keeps searching but is finding something else that I don't have. My iPhone 5 finds it

    Hi Dawn0317,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots.
    iOS: How to troubleshoot Bluetooth connections
    http://support.apple.com/kb/TS4562
    Cheers,
    - Judy

  • "can't find remote speaker"

    AirPort works fine for an hour or two, but then the audio dies and iTunes says (something like) "can't find remote speaker".
    I have to disconnect from the network and connect again. "repairing wireless connection" also works.
    Do you know of any way around this problem?
    Thanks,
    Peter

    Try changing the channel used by your wireless network (or by the Airport Express itself if it is being used as a standalone device). Some experimentation may be required - start with either channel 1 or 11.

  • Aio remote can't find printer

    I have a HP Envy 4507. My AiO Remote app can't find it. This is not a compatibility issue as I have been selling 4507's which I demonstrate by connecting to them. I originally was able to connect on the one at home but not lately. I keep on seeing the one from work. HP ePrint sees the home one fine. I have reinstalled AiO Remote and now it cannot see any printers, no matter how I try to connect. Tried ip address, direct (which was working before) and through wireless router which worked when I first set it up.

    Hi,
    Thinsg to quickly check would that there has been no recent  wifi password changes - if there has been any, they password would need to be re-entered into both the mobile device and printer.
    Another quick thing to try is restarting the mobile device - this sometimes helps re-establish the  connection.
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • My MacBook Pro can't find the FireWire port

    My MacBook Pro (OSX 10.6.8) can not find the FireWire port. Until now there hasn't been any problems using the FireWire, but now it just deny any knowledge of it, so to speak.
    The audio device lights up when I connect it to the MBP (yes, I did connect it when in off-mode), so it seems to work in a way.
    Does anyone recognize this problem and knows how to solve it?
    /JohanLaMar

    Have you tried following through the trouble shooting tips in this knowledge base article on Firewire?

  • Itunes can't find the REAL last version of my ipod

    HI,
    I want to put my ipod touch 2 generation 8g on the 4.2 because it's only on 2.2.1 now but itune say that 2.2.1 is the latest version but I saw on google that people with a 2G have the 4.2 so I don't know what to do !
    When I click on ' search for update ' it just say that its the latest version but I know that it's not and I can't find how to change it.firmar
    I tried to download firmware of the 4 but when I want to restor it tells me that is not compatible.
    I can't also find an only little app or game who fit on my ipod everything is for ios 3 and 4. So my ipod is really useless.lease
    Please Help me to upgrade it I'll be sooo thanksfull. I'll have no choice to sell it if nobody can help me!
    ( sorry I don't speak english verry well but I understand almost everything )
    - Marie

    I have beem having the same problem. I even created another user on my PC but developed the same situation! ARGH!

  • LapTop can't find Airport Express to play iTunes.

    I’ve been using Airport Express 4.1.01 (installed Nov ’04)for the sole purpose of wirelessly playing iTunes thru stereo system which is in a different part of the house from my Dynalink Modem-Router. The Toshiba L/T I had been using was clogged and painfully slow to use so was cleaned up by using the recovery disk and it is now used by another family member but is not using AE.
    I‘ve bought a new Toshiba L/T with XP Prof OS. Both L/Ts have wireless connection to the internet using a Dynalink Router/Modem (R/M)and share a printer – not via AE.
    My system is similar to that on page 18 except L/Tops are connected wirelessly to R/M and the stero and AE in a different room from the R/M. I don’t expect to listen to stereo and browse net at same time.
    When I attempted to install AE I got an error message “A later version of iTunes is already installed on this machine. Installation cannot continue”. Current iTunes is V7. However, when I clicked OK on the error message the AE Introduction Window with the 3 icons (Internet, Music and Printer) appeared and over the top of the AE window another error message. “An error occurred while trying to use the wireless internet system” and the Next button on the AE window was dimmed. Once I clicked OK on error window the Next button cleared and clicking it I chose the “Set up a new AE” option and next the “Create a new wireless net work network” option.
    Despite the error messages both Airport Admin Utility and Airport Express Assistance are installed and scanning and rescanning give negative results. The Admin Utility opens the Base Station Chooser window with the left panel blank and the Base Station Information panel also blank. The Configure button disabled. I’ve done both sorts of resets and still nothing even though I’m doing this in the same room barely 2 metres from the AE and in the same position where everything had worker OK on my previous L/T.
    I’ve even tried connecting my L/T to AE with an Ethernet cable and opened the AE Admin Utility. Still nothing and NO Tabs for either AirPort or Music Settings. Instead there are 3 Menu items – File, Base Station and Help as well as two buttons – Other and Rescan. I don’t have the information for the information asked by pressing Other.
    When I attempted to update AE after downloading Airport V5.0.14 I was got the message “This update requires Airport V 5.0 to be installed. I can’t find V 5.0 to download if that is in fact the answer to my problems.
    PLEASE! I desperately need help. Can’t remember this hassle when I set it up 2.5 yrs ago.
    Toshiba L/T Windows XP Pro
    Toshiba L/T   Windows XP Pro  

    This seems to be a common problem on several threads lately. Everything is configured correctly.
    The airport status is green. But iTunes does not show the speaker choice button.
    It was working fine, but at some recent point it stopped and I can't get it back.
    I have the same issue with two different Airport Express units.

  • The sound effects volume is all the way down. It pops on for a second, then disappears. I can't find it in settings.   How do I get the sound back?

    The sound effects volume is all the way down.  It pops up for a second once in awhile and then disappears. I can't find it in the Setting.  Music sound plays fine, but no sound on my apps.  Any idea how to fix it?

    If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • Can't here my center speaker on my Inspire 5.1 p5800

    I got inspire 5.1 p5800 speakers and my sound card is an sound blaster audigy platinum.
    When i do test my center speaker works out find, but when i play music of any audio file type, video of any file type, dvd in 5. mode and games in 5.1 mode I can't here my center speaker.
    If I put the speaker of to my ear I here low volume sound (very low volume).
    Can anyone help

    I found media player that will play the center channel now!If you have it use intervideo dvd 6 as a music player.
    and set it for the 5.1 of course and I like movie surround more than music surround
    one thing i love with p5800 speakers base is that at only 83% max base on sound card turned on and only 50% base on speakers turned on its one heck of a loud base
    its all based on what files are 5.1 and which are not and win dvd platinum can force the upmix to make the center speaker work if the stuff isn't 5.1 .
    like windows media player has 5.1 but doesnt change the play back of things that arn't 5.1
    I dont know why on some dvds on media player you set to 5.1 the center channel doesn't work though.
    But at least as long as your 5.1 mode turned on in intervideo win dvd 6 platinum the file will always play 5.1 even if the file is mono sound.
    another good thiong about intervideo win dvd 6 is that it plays the divx and to me the performance is better than my divx pro....
    Message Edited by aoi on 02-20-2005 05:59 AM

  • Can't find camera !

    Hello
    my laptop
    42335MG and use the system Windows 7
    Currently suffer from the problem of not being able to open camera or can't find application look this image
    http://6eer.co.tv/images/kvk.jpg
    There are two other were defined I do not have the knowledge of being a Asitoanh definition
    http://6eer.co.tv/images/sxc.jpg

    When I switched from Vista to Windows 7 I couldn't find my T400 camera either.  There are drivers but no application software.  Try YAWCam.  Perhaps that will work for you.
    YAWCAM - yet another webcam software
    HTH,
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • My Mac can't find airport express in AirPort Utility - I'm stuck!

    I've been fiddling around with this thing for three hours and can't get it to work. I only want to use my airport express to wirelessly play music from my laptop to my speakers on my desk. I dot not want it affiliated with the internet in any way.
    I plugged my speakers in to the white square apple thing, then plugged it into the wall. The next step is to open Airport Utility to set it up. My airport utility can not find any devices. It says "AirPort Utility was unable to find and Apple wireless devices. Please make sure the Apple wireless device you want to set up is plugged in and in range of your computer, and then click rescan to try again."
    I've checked everything. I am currently about four feet away from the white AirPort plug-in thing, so distance is not it. I'm sure my airport can view all available networks, my AirPort is working fine for my internet (the internet is not affiliated with AirPort Express).
    I think maybe this is defective? All help I can find starts off saying to open AirPort Utility, select the new device and, ....
    I am running on Mac OS X Version 10.4.11, and I am sure my AirPort device is up to date.
    Help?

    Yes, I told it to allow wireless networks. It's having a hard time joining my internet network - is that the one I'm supposed to be telling it to join?
    I don't want to hook this up to my internet becuase the internet is the other room and I don't watn to mess with the internet settings my Windows roommate already has. I want the speakers to play in the bedroom, which is a good 30 feet away from the living room where the internet base is.
    Should i create a new network and ask it to join in on that? but if i do that, will I still get internet?
    As it stands right now my airport turns off when i unplug the ethernet, and nothing can be found - even though I told it to enable wireless.
    This is so **** confusing. It does seem to work fine when the ethernet thing is in it though... but if I'm going to plug the ethernet chord to it, I'd rather get a long speaker chord and plug my speakers in to my laptop from across the room and save myself the $100 for this airport thign.

  • Re: How can I find my cabinet number and when it w...

    Hi,
    I've been told by BT help chat that my address can get BT Faster Broadband but not Infinity. I'm connected to the Trowbridge SSTRO exchange which is apparently "FTTC available in some areas")  Presumably that's to do with the distance of my house from either the exchange (2.2km) or the street cabinet (not sure which cabinet I'm connected to or where it is). If I've understood correctly, Faster Broadband uses the same fibre infrastructure as Infinity but because the speed can't be guaranteed as above 15Mb/s it can't be sold as Infinity. I am currently a Sky Talk subscriber so many of the BT utilities come back with an "number not recognised" error when I enter the phone number. So I guess I have 2 questions:
    o If I take up Faster Broadband, how can I find out what speed I can actually expect?   
    o How can I find out how long it will be before I can get the full Infinity service?
    I might add that a friend of mine in Trowbridge (1.1km from SSTRO) has full Infinity.
    Thanks for any help, Midsomerjambo

    Hi midsomerjambo,
    BT Infinity and BT Faster Unlimited  Broadband is just BT Retail's brandname for their fibre broadband service.
    The reason why BT Retail say you can't get FTTC BT Infinity is because the FTTC estimation is below 15mbps.
    However you should be able to get BT Faster Unlimited Broadband (FTTC) which is the same as BT Infinity FTTC but for those who have been estimated 15mbps or less on FTTC
    BT Retail set a minimum speed required in order to get BT Infinity which is an FTTC estimation of 15mbps or above, if you have been estimated less than 15mbps for FTTC then you won't be able to get BT Infinity but may be given the choice of BT Faster Unlimited Broadband which still uses the same FTTC Openreach infrastructure and equipment .
    What does it say for your landline number when you go to http://dslchecker.bt.com/adsl , If you don't have a BT Wholesale compatible number then you can check by your address by going to http://dslchecker.bt.com/adsl/ADSLChecker.AddressOutput (won't be as accurate as the landline number checker, but will give you an idea of the estimation speed)
    FTTC fibre broadband uses VDSL or VDSL2 signals that travel from the FTTC cabinet to your property via the existing copper (sometimes aluminium) line. The further away you are from your FTTC cabinet the slower the fibre FTTC broadband will be.
    However VDSL/2 signals used for FTTC broadband connection degrade far quicker in terms of distance than conventional ADSL broadband signal do.
    Generally speaking if your landline is over 1500 meters in length from the FTTC cabinet to your property then you may not be able to get BT Infinity as you may not be able to achieve over 15mbps from an FTTC service, though may be offered BT Retail's sub 15mbps FTTC service called BT Faster Unlimited Broadband.
    Here is a graph that shows the ADSL(G.DMT,ADSL2 and ADSL2+) and VDSL/2 (FTTC) signal with distance. Please be aware that all ADSL connections are depend on distance from local exchange, where as FTTC (VDSL/2) connections are depend on distance from your FTTC (DSLAM) cabinet. Though all connection types are also depend on line quality.
    This graph is also just a general estimation of what the speed could be achieved and not the actual speed you will receive. Also your line maybe longer than you would think as it may not go the direct way to either the cabinet or exchange.
    As to your other question How can I find out how long it will be before I can get the full Infinity service?
    The Openreach Superfast Fibre Broadband Scheme is being rolled out, done and managed by Openreach for ALL ISPs/CPs so BT Retail (a communication provider/ISP whom operates this forum) does not have much input or say whether Openreach will improve the FTTC fibre infrastructre in your area.
    Unless Openreach (who owns and maintain the fibre broadband infrastructure in your exchange area) either installs a new PCP and Dslam cabinet nearer to your property, or you order FTTPoD (Fibre to the Premisies On Demand) [not currently being supported by any ISP] which may cost you thousands, then I'm afraid it may be several years or so until the FTTC fibre infrastructure is improved by Openreach.
    Hope that helps,
    Cheers
    jac_95 | BT.com Help Site | BT Service Status
    Someone Solved Your Question?
    Please let other members know by clicking on ’Mark as Accepted Solution’
    Try a Search
    See if someone in the community had the same problem and how they got it resolved.

  • Can alerts sound from main speaker when using earbuds?

    I have headphones connected all day although they're not  always in my ear. (Either connected & Bluetooth)  If I receive a call, the ringtone sounds through the  external speaker AND headphones. (This is good).  Alert tones (email, calendar) sound ONLY  through the headphones; so, if they are not in my ear, I may not hear  it. (This is bad).
    I can't find a setting to change this.  This would be easy for Apple to allow and makes sense to me.  Any time I don't want sounds, I would toggle the mute switch - which is easer than changing a setting anyway. 
    Is there an App Store app that will allow this? 

    Nope.Try to REMOVE the headphones when you are not using them.This,Sir,is the only solution.

  • Can't get my epson sx535wd to work. my epson will get contact with my router (sitcom wl306) and my mac is on wifi, but they can't connect. epson can't find the computer and my report says: there are conflicting channels on my router or entry point. help

    can't get my epson sx535wd to work. my epson will get contact with my router (sitcom wl306) and my mac is on wifi, but they can't connect. epson can't find the computer and my report says: there are conflicting channels on my router or entry point. please help

    OK, let's try these................ 
    1 - Boot up from your install DVD and run "Repair Disk" from the Utility menu.  When done, restart back to your desktop, repair permissions and restart your computer.  Re-connect your printer. 
    2 - Download & install the Gimp drivers. Make sure the one you install is compatible w/your OS-Gutenprint 5.2.8-pre1.   Repair permissions, restart your computer & re-connect your printer when done.
    The Epson model I have, in order to get it to print wirelessly, I had to install a Gimp driver.
    3 - Check out the following KB Articles:
    Mac OS X 10.4 Help: Connecting to a network printer
    Epson Printer Drivers v2.10 OS X
    Adding a printer to your printer list in Mac OS X
    Mac OS X 10.4 Help: The printer I'm adding says "Driver not installed"
    ======================
    If still unsuccessful after trying all of the above, the problem could be your iBook or human error.  You can either call Epson & ask to speak with a Mac savy supervisor or return the printer & find another that is compatible w/your current OS.

  • HT4009 How can I find out what I have been charged for (in app purchases)

    I am being charged for something from apple i store but I can't find out what for. Any suggestions where I can find a list of what's been purchased?

    Hey Dafydd182,
    Thanks for the question. Yes, when you access iTunes on a computer you can view your purchase history and order numbers. The following resource should guide you through that process:
    iTunes Store: See your purchase history and web order numbers
    http://support.apple.com/kb/ht2727
    Additionally, if you find a purchase that you believe may be incorrect or would like to speak to someone about it, the following resource outlines how to report an issue:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/HT1933
    To report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase, follow these steps:
    1. Find the email receipt for your purchase.
    2. Click Report a Problem under the app that is having the issue.
    3. When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
    4. Click Report a Problem next to the item you are having an issue with.
    5. From the Choose Problem dropdown menu, choose the appropriate issue.
    6. Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
    7. Click Submit to have your issue reviewed.
    If you are in the U.S. you can also access this tool online:
    http://reportaproblem.apple.com
    Thanks,
    Matt M.

Maybe you are looking for