I can't find my ID and Password information for my AirPort Extreme, How can I recover or re-set with a new ID

I have mis-placed my note that has the user ID and password to update my AirPort Extreme Wi-Fi. How can I recover or replace this information?

Follow the instructions for a Soft Reset in this Apple Support document:
Resetting an AirPort Base Station or Time Capsule FAQ

Similar Messages

How can I recover my old account with a new one?

Hi, my hotmail account it was hacked, I can't have acces to my adobe account anymore.
How can I get acces to my old account with a new Adobe ID?
I'm already subscribed to creative cloud and I can't have acces to my account and upgrade my products.
what can I do?
Thanks

Thanks Romshina
I read the link you send me and thanks, but the thing is that I still can't get into my Adobe Id, because when I try they ask me to reset my password in an email they will send me to my old account and there is the problem, because I don't have acces to that old acount, [email protected]
now this is my new email, because the las one it was hacked and I just can't get back to it.
So I would like to have access to my account and update this new email account, to have acces to my CC account.
Thanks
Date: Fri, 27 Dec 2013 06:51:15 -0800
From: [email protected]
To: <Removed by Moderator>
Subject: Re: How can I recover my old account with a new one? How can I recover my old account with a new one?
    Re: How can I recover my old account with a new one?
    created by Romsinha in Adobe Creative Cloud - View the full discussion
Hi Guillermo Castellanos,
Please refer the knowledge base article: http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sig n-faq.html.
Regards,
Romit Sinha
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5959347#5959347
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re: How can I recover my old account with a new one?
To unsubscribe from this thread, please visit the message page at Re: How can I recover my old account with a new one?. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Adobe Creative Cloud at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Dreamweaver 8 won't hold site login and password information

Hello,
When I enter the login and password information for my DW8
sites and click the save box, it will work fine for the rest of the
work session. I can connect, upload and download without a problem.
But the next day when I try to work on the site again, I get the
error message that the site cannot be found, and have to go back
into manage sites and enter the information again. Can anyone tell
me why my DW isn't keeping this information?

Nevermind...after looking further through the site, I found
that it was a problem identified by Adobe and solved with an update
patch. I will download that and it should do the trick.
Thanks.

I Have "New" MBP (Mid 2009) and Would Like to Use Airport Extreme

This might be a very basic question , but I do not know the answer so I came to some experts for help. I have a "new" MBP OS 10.6.4 SL. I received it about 1 month ago after the genius bar could not fix a 3 year-old MBP. At one time the Airport Extreme was hooked up when I first got the 3-year-old MBP, but I kept running into troubles with it so I purchased a Verizon MiFi2200.
I have this new MBP, I still have the MiFi2200 from Verizon which I access via Airport. I would like to try the 3 year-old Airport Extreme again, but I am wondering if having the Verizon MiFi2200 will allow me to also have the Airport Extreme. Also, I am wondering if this Airport Extreme is too old for what is currently available (and if it is secure enough). I would need to get help from Applecare. I tried once, when I first started having trouble with it, and it was way beyond my ability. I think I made things worse and I hope I did not do any hardware damage. I tried to set it up, after having it disconnected for about 2 years, and I did not call applecare.
So I am wondering if I can have the MiFi2200 installed by VZAccessManager (but turned off when I use the Airport Extreme) and the 3 year-old Airport Extreme 802.11n Wi-Fi Base Station set-up at the same time. Also, is this model still OK to use (I really have no idea how long something like this Airport Extreme is good to use), and if I can use it, are there online instructions to set it up or would it be best to get Applecare's help. I would also like to know how I could find out if there have been any firmware updates or other updates for this Airport Extreme since it was last used (about 2 years ago)
thanks in advance and I apologize if my terminology is not correct or too amateurish.

OK, I am not following you exactly and I guess it is important to know what the existing set-up is like. Maybe you will understand my amateurish language. Before I moved in to this condo, the manager of the complex asked me if I need to use the ethernet ports in the rooms or will I be setting up a wireless connection. I said, for now I will be using the ethernet ports in the rooms of the condo. She said Ok, I will be up to your condo to put in a modem. (She could have said router or modem, I am not sure if there is a difference, but I do know the Airport Extreme is considered a router.) She opened this box that is on the wall while she said this is where the "T1" line comes into your condo, and T1 (I think I have the right term she used) is the fastest way to get around the internet. In the box in the wall is an electrical outlet (which the tiny blue modem (I will call this a modem because I am not sure what it is) is plugged into. In the back of the tiny blue modem are 5 ethernet ports and that is all, except for the power cord which connects to the side of the tiny blue modem. In the box, already screwed into place is a CAT5 ethernet strip, for lack of a better term that has 12 ethernet ports but only 4 are actually marked. I think the four that are marked are the ones that can be used, if I needed this many, but I am only using 3 and the ethernet cable goes from one of the ethernet ports on this CAT5 strip which is connected to the T1 line, and one of the 3 ethernet cables goes from the back of the tiny blue modem to one of the ethernet ports on this CAT5 strip (one that is marked as previously described) So I can hook up to the internet by using one of the 3 ethernet plugs in the various rooms of the condo or I can use the MiFi2200 from Verizon for a wireless connection. I have already told you why I prefer not to use the Verizon MiFi2200 and why I would like to set-up my Airport Extreme.
As far as wanting to use the existing ethernet ports in the 3 rooms, I do not care about that unless the Airport Extreme does not work. The manager who initially hooked up the tiny blue modem said if I want a wireless connection I do not need the tiny blue modem. If I do want to use the ethernet ports in the rooms via an ethernet cable, I need the tiny blue modem. If this is tru or if I can have one and not the other, I really did not get a sense I could or could not have both a wireless and ethernet connections at the same time.
Why would I want to plug the 3 or 4 ethernet cables that go from the tiny blue modem to the ethernet strip? The ethernet strip has about 10 ethernet ports, 3 of which are marked and I assume only those 3 can be used since there are only 3 actual ethernet ports in the walls in various room for connection.
I know this is a different set-up but when I used the Airport Extreme before, I had a cable come in to my house from Comcast which was hooked up to a modem. One ethernet cable went from the modem to the back of the Airport Extreme which after Applecare helped me set up the Airport Extreme the whole house was wireless.
In this condo, which is smaller than the house I had, why do I need all 3 ethernet cables to go from the CAT5 strip to the back of the Airport Extreme? Again, on the 12 port CAT5 strip, only 3 are labeled with some code, and those 3 go out to the wall ethernet ports.
Are you getting ready to give up on me?

Hi,,I forgot the icloud id and all information for this accound and i can't active my mobile please haw i can find my account i remember password only for may account.what is account linked my phone

hi,,,
I forgot the icloud id and all information for this accound brcouse my children forget it, i was restored my iphone naw is blocked and i can't active my mobile please haw i can find my account linked phone. i remember password only for my account i don't remember that exactly
please find it to me
thanks,,,
<Personal Information Edited by Host>

This is a user-to-user tech support forum, as explained in the fourm Terms of Use you agreed to when you joined. No one here can find your ID. See this:
Apple ID: If you forget your password
Apple - My Apple ID
Message was edited by: modular747

I have an Ipad My apple ID and password works for Ibooks and Icloud but when I try to get into the app store it doesn't show my entire email address on the account. When I try to get into the app store it tells me my password is incorrect. How can I corr

I have an Ipad My apple ID and password works for Ibooks and Icloud but when I try to get into the app store it doesn't show my entire email address on the account. When I try to get into the app store it tells me my password is incorrect. How can I correct this? I have been emailing support but so far they have been no help

Open the App Store app, go to the Featured pane, swipe to the bottom, tap the Apple ID and sign out. Tap again and sign in with the Apple ID of your choosing.

Where can I find good organ and keyboard sounds for Logic Express?

Where can I find good organ and keyboard sounds for Logic Express? The included sounds seem to be lacking or hard to access.

Update: Not terribly impressed with the interface for NI's Vintage Organs from the demo download, although the sound demos sure sound good. The letters are tiny and hard to read and the whole thing feels very PC-centric. I guess a guy gets spoiled by the intuitive stuff. I think what I'll try for now is just hooking up my keyboard (Korg N1, circa 1998, about 1700 built in sounds) as a sound module and record the waveforms when I find a sound I like. I did find the EXS24 and several other software synths with some cool organ sounds after digging a little deeper. It would be good if Apple came out with another jam pack just for organs and keys, as the existing jam packs are so easy to use.

Can I use the Time Capsule strictly for system backup and continue to use my Airport Extreme for all my wireless needs

I want to use the Apple Time Capsule as an external drive and continue to use my Airport Extreme for all my wireless needs. Can I do that? The reason I ask is that my Time Machine utility cannot find the TIme Capsule - it only shows me the Airport Extreme, even when I "Rescan". SO I am unable to use the Time Capsule.

You will need to connect an Ethernet cable from one of the LAN <-> ports on the AirPort Extreme to the WAN "O" port on the Time Capsule.
Perform a "hard reset" on the Time Capsule by holding in the reset button for 9-10 seconds, then give it another minute to restart to a slow, blinking amber light.
Open AirPort Utility, select the Time Capsule, and click Manual Setup
Click the Time Capsule tab located below the row of icons to assign a name to the Time Capsule, a device password, and adjust Time Zone settings.
Next, click the Wireless tab located to the right of the Time Capsule tab
Change the setting for Wireless Mode to Off
Click the Internet icon, then click the Internet Connection tab
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Click Update at the lower right to save the settings and allow 30 seconds for the Time Capsule to restart to a green light.
You are all set

Hi iforget my email and password icloud for my ipad 2 16 gb s.n DYTKJ49PDKPH

hi iforget my email and password icloud for my ipad 2 16 gb s.n DYTKJ49PDKPH

If you don't know your ID ("email"), you will have to try to find it as explained here: http://support.apple.com/kb/HT5625. If you don’t know your password you can reset the password as explained here: http://support.apple.com/kb/PH2617.

I just brought a apple 5c from the market and tried to load it but it's asking for Apple ID and password what a wast off money how do I unlock it now

I just brought a apple 5c from the market and tried to load it but it's asking for Apple ID and password what a wast off money how do I unlock it now

You can't. It is locked to the previous owner's account.
Have the previous owner remove the iPhone from their account or get your money back.
Find My iPhone Activation Lock: Removing a device from a previous owner's account

Where could we find the CT and PT values for Particular Device ???

I 'm facing a scenario in a report i need to place a field device number and assosiated CT's and PT's .
where could we find the CT and PT values for Particular Device ??? basically im MM consultant   we don't ahave DM consultant please help with this issue???
means actually i got the table and field details for transformation ratio (or) CT/PT ratio
                      ETYP_UEBERVER. from the screen EG03 , t-code
                        but im not sure   this is the exact field that i require ....
can any one help ....   i will be very thankfull to your solution inadvance....

The transformation ratio are the attributes of a "Winding Group". Find winding group of a device and then you'll get the desired information.

Username and password default for BAM database

Hi everyone,
I have installed in my machine a virtual machine wich have the Oracle BAM 10 installed. We are trying to connect to the BAM database but the problem is I dont know the user default to do it. I also have in my machine(real machine) the BAM tp4 wich I m able to access the tables with username:oraclebam and psw the same. So somebody knows how can I do the same with the version 10 of BAM?

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by [email protected]:
I have Oracle8 (8.1.6)personal edition for win98 install on my machine.I want open SQL*Plus but I don't know password and username default .I tried key username is 'system' and password is 'manager' ,application not open. What is username and password default for it?
Thank you<HR></BLOCKQUOTE>
null

Owned an iMac for 5 years - have no idea what my password is for my AirPort Express which I set up about 3 years ago My wife has just purchased an iPad 2 and it is asking for my forgotten password - how do I retrieve it ?

How do I recover my password set up when I added AirPort Express to my iMmac a few years ago.. My wife has just purchased an iPad and it is asking for that "forgotten" password to make the Wi Fi connection ?

From the airport express user manual:
If You Forgot Your Network or AirPort Express Password
You can clear the AirPort network or AirPort Express password by resetting AirPort
Express.
To reset your password:
1 Use the end of a straightened paper clip to press and hold the reset button for one
second.
2 Select your AirPort network.
On a Macintosh computer:
=> Use the AirPort status menu in the menu bar to select the network created by AirPort
Express (the network name does not change).
3 Open AirPort Utility, located in the Utilities folder in the Applications folder on a
Macintosh
4 Select your AirPort Express and click Configure.
5 In the dialog that appears, make the following changes:
Â Reset the AirPort Express password.
Â Turn on encryption to activate password protection for your AirPort network. If you
turn on encryption, enter a new password for your AirPort network.
6 Click OK.
AirPort Express restarts to load the new settings

How can I export photos from Aperture with a new sequence and ignore the embedded JPEG number? Have tried renumbering to no avail.

How can I export photos from APERTURE with a new sequence and ignore the embedded JPEG number? Have tried renumbering to no avail.
has anyone resolved this issue?
This is now the second big Problem with using Apple's Appeture with NO apparent FIX...
Aperture has NO DIRECT way to Burn to a CD/DVD & apparently NO way to RE-SEQUENCE the numbering system????
ANYONE... I wish APPLE would address/fix these 2 problems... LIGHTROOM I guess is next?

Hi David,
Coming in and whining loudly is rude. We are all volunteers here, voluntarily sharing our expertise so that users like you can make the most of their time with Aperture. Speaking just for myself: although I do care about your success with software (it's why I'm here), I don't care what software you use. If you want to use Lightroom, do so, and post your questions in an appropriate forum.
Burning files to a CD is a file operation done at the system level (it is built into OS X). Aperture lets your create sharable image-format files from your Images. You then use OS X's tools to burn those files to a CD. Iirc, you can set up a "Burn Folder" in Finder, into which you can export files created from your Images, and with a single click burn your CD.
Naming the files you create by exporting your Images can be tricky. There are _many_ possibilities. Some things can't be done. Sequencing can be done in a number of ways (see Léonie's answer above). What have you tried? What was the result? In what way did this differ from what you expected?
--Kirby.

How to find gr details and invoice status for particular list of purchase

Hi,
how to find gr details and invoice status for particular list of purchase orders.
is there any t.code/report for it??

Hi,
You use t.code:ME2Nand enter PO number,tn Execute.Now you will have PO details .Now in item details get GR details and Invoice details in purchase order history TAB.
In t.code:MIR5, you can see blocked invoice by selection.
Regards,
Biju K

I can't find my ID and Password information for my AirPort Extreme, How can I recover or re-set with a new ID

Similar Messages

Maybe you are looking for