I can't find my network with Bridge CS4

With Bridge CS3, I used to be able to connect to any machine on my network. There was a network icon (globe) in the folder browser pane. Now I don't know how to find other computers on my network from Bridge CS4. How do I do that in CS4?

So far my fiancé and I haven't been able to find a direct option from bridge to do this either. However we did find that if you open the network from Photoshop CS4, you can drag and drop the network from there into bridge.
Sucks that you can't do it right from bridge, but at least it's still possible!

Similar Messages

  • IMAC can't find N network with TC firmware 7.4.1 and 7.4.2

    Hello, I have a problem since I upgraded my TC from 7.3.2 to 7.4.1 and 7.4.2.
    both my two IMACs can't find the TC N network, only if I downgrade to 7.3.2 they actually find and connect to the TC N network.
    please let me know if the only solution is not to upgrade the firmware.
    thanks
    Fabrizio

    Same here: 7.1.1 works but 7.2.1 & 7.3.1 do not with the same symptoms.
    In fact there are now several threads reporting the same loss of internet connectivity. Happily reverting to 7.1.1 restores connectivity.

  • Photosmart b209a can't find wireless network.

    I've only had this printer for three days. The "Easy One Button" process to get it to find a network failed. It cannot find my wireless network.
    I'm using XP Professional on my laptop. McAfee Virus scanning and Firewall. (Not that it matters if the printer can't find the wireless network)
    I have a DSL D-link router with NO MAC filtering and yet when I print the Wireless Network Test Report it gives me this whole spiel on MAC address filtering and asks to add the MAC address of the printer to the router... but there's no offered solution if MAC filtering is turned off.
    I've changed my router security key from WEP to WPA-PSK.
    I've managed to get it to connect twice... and to print a test page on separate days. I have no idea what it is I do that gets it 'online' but it doesn't seem to last.
    I have spent several hours over the past three days (wasting entire days) trying to work out what the problem is. I have read forum posts; I have googled for solutions. The troubleshooting guide for the printer seems hopeless.
    The printer is on the same desk as the router with only a computer monitor between them.
    When I print the HP Network Configuration Page it states the status of the 802.11 Wireless is "Disconnected". The printer's wireless light is on, showing that the wireless radio is working on the printer.
    I bought HP because my last printer was HP and it was excellent (but not wireless). If I can't get it to go online, seriously, I'll take it back and exchange it for a different brand of printer. All I want is a printer I can print to wirelessly, is that so hard to ask? Yes, I'm getting really frustrated here. I live in a rural area and I don't have access to geek friends or a computer professional or anything like that and returning the printer requires a two hour drive so I have to be as self-sufficient as possible. Please, try not to use too many technical terms. I can understand some but not all and if anybody can help me, please be clear in their instructions (ie, don't just say 'go to setup blah blah blah' without saying which setup you're talking about.)
    Thanks for any help. It is appreciated.

    Yes, the desktop is connected to the router with an Ethernet cable.
    Yes the laptop is wireless.
    The printer is connected to the router via wireless (which I've already stated, it keeps losing the wireless network).
    If I don't have my printer connected to the desktop via cable, then I won't have any printing capability at all, because, as I just said, the printer keeps losing the wireless network! I need at least some way of printing when the printer can't find the network (even though the wireless network is working perfectly fine).
    So, desktop connected to router with cable.
    Laptop is wireless
    Printer is wireless for laptop use (but it keeps losing the network and therefore is totally useless in that respect)
    Printer is connected to desktop via cable to enable printing because of wireless continuing to lose connection to wireless network.
    In fact my printer hasn't been able to connect to the wireless network for 2 days now... even though I'm currently connected to it on my wireless laptop.
    Sometimes the printer finds the network, sometimes it doesn't and when it does, if I try to print from the laptop wirelessly, the printer loses the network.
    This really is poor product and the installation manual might as well be used for toilet paper for all its worth, same with the 'help' feature on the disk. I only chose HP because I was familiar with it, since my previous printer was HP and reliable (but not wireless). I'm seriously wishing I'd purchased a different brand.
    I'm not an IT tech, but I've managed to be able to connect modems and routers and other peripherals to my network without too much hassle at all... until now.
    I'm sorry if I sound angry but this is completely frustrating. I spent good money for a product that I am unable to use for the main purpose I bought it! I'm reduced to saving things to USB sticks and physically taking them to the desktop computer and having to print from there.

  • My iphone 4 can't find a network

    I bought my iphone 4 in Ny and brought to Brazil. It was working fine till last Friday. It can't find a network anymore. It says on the upper left corner "no service" instead of showing the carrier name and its signal. I tried to contact my carrier but it seems to be everything fine, I even tried de microchip on my Ipad and it worked perfectly, so it should be a proclem with the phone.
    I tried to reset the device, but nothing seems to work.
    Anyone could help me on this, please!!!
    (excuse my lousy english, please!)

    1. Try doing a hard reset:
    Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
    2. If that doesn't work, use this article for troubleshooting: http://support.apple.com/kb/ts1398
    3. If that doesn't solve the issue, backup the device and restore it as new.
    In that case, use: http://support.apple.com/kb/HT4137
    NB: set up as a NEW device because a software issue will be in the backup. If the issue persists after restoring as new, you should offer the device for service.
    If you get specific error messages/codes in iTunes when updating/restoring, check this: http://support.apple.com/kb/ts3694 for causes and solutions
    If you restore your iPhone to factory settings without a backup and still can't detect/connect to any network, you should offer the device for service.
    Good luck
    JW

  • HT5569 4S phone to IOS 7.1.2 and lost my wi-fi.   The wi-fi is on, but can't find ANY networks.   I have been through all the steps, from turning the phone on and off, resetting the network settings, resetting the whole phone, redownloading 7.1.2 an

    I updated my 4S phone to IOS 7.1.2 and lost my wi-fi.   The wi-fi is on, but can't find ANY networks.   I have been through all the steps, from turning the phone on and off, resetting the network settings, resetting the whole phone, redownloading 7.1.2 and lastly going to the Apple store for help.   They tried all the exact same steps I did, took the phone apart and looked at and said it is in "pristine" condition.   They have no idea why it isn't working, but they could offer to sell me another phone.    This is extremely annoying!    They claim it has nothing to do with the update to 7.1.2, but that is when I lost the wi-fi, so it has to be related!

    My 4s i-phone which is 2 years old cannot find any wi-fi networks not even my home network... I had the same problem two months ago but i turned off the i-phone for 8 hours and then it was okay... Now it happened again.... I tried to restart the modem but whilst my laptop is connected regularly, my phone still cannot find any wi-fi networks... I restart the i-phone, i reset it, i chose reset network settings, reset all settings, i turned it off for a whole day in case it was overloaded, i turned on the airplane mode and turned it off again, i put it into the freezer for 10 minutes within a zipped bag but 3 days now and i still cannot be connected to my home wifi... I went to the technician today and he told me that it means that wi-fi is broken and that i need to change it with a charge of 70 euro but i have to give my phone for 10 working days so as to be fixed... I am so frustrated and i don't know if i want to give 70 euro for wifi since i don't know if it would make the same problems again... 

  • Upgraded as prompted, noiw it can't find my network

    I was prompted to upgrade airport express software, but after I did ("successful" it said) it searches but can't find my network. I ran airport utility and it found no problems.

    Apple have messed up big with teh latest updates to a lot of things they have been forcing upon you. Itunes 10.2 destroyed Airtunes, and something Apple did has caused my network, which has been like a rock for 6 years working flawlessly, to act so erratically that I just don't care anymore. I now have AEX devices flashing yellow and not seen on Airport utility, yet I can play music through airtunes on them. I have an Airport extreme connected to the cable modem to use as a wireless router that will disappear from the utility, yet my internet connection over wireless is unaffected.
    It is so FUBAR'd right now I have stopped caring, and will have to wait for Apple to fix all the problems they created with these new updates they are rolling out for purposes I don't really understand.
    It is a system that once worked flawlessly as advertised, to something that I don't even try to use anymore. It's frustrating, but what can you do. I just try to complain to Apple enough until I feel I have been heard. I keep my fingers crossed with each update to fix the problems that obviously exist, and each time the updates make the system even worse.

  • HT5824 i lost my phone and it is switched off now...how can i find my phone with find my iphone app active thru icloud?? pls help me.

    i lost my phone and it is switched off now...how can i find my phone with find my iphone app active thru icloud?? pls help me.

    Welcome to the Apple Community.
    You can only locate your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
    Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

  • HT201441 can i find my iphone with the phone number or serial number

    can i find my iphone with the phone number or serial number

    You can only locate, lock or erase your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
    Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

  • Can I extend a network with an AirPort Extreme Base Station Rather than with an Express?

    Topic title pretty well sums up the question.
    I have a TimeCapsule Base Station with two Expresses for extending the network through the house.
    We're doing a 3 room addition, and there is not a convenient place to put an Express in a wall outlet in the middle room of the addition, but there's a perfect place to put an Extreme on top of a piece of furniture.
    So, can the Extreme act as an "extender" only, in lieu of using an Express?

    pcbjr wrote:
    Topic title pretty well sums up the question.
    I have a TimeCapsule Base Station with two Expresses for extending the network through the house.
    We're doing a 3 room addition, and there is not a convenient place to put an Express in a wall outlet in the middle room of the addition, but there's a perfect place to put an Extreme on top of a piece of furniture.
    So, can the Extreme act as an "extender" only, in lieu of using an Express?
    Hiya.
    You can absolutely extend a network with an Extreme. I've got a 5th gen. Extreme extending a network created with a 3rd gen. Time Capsule. On the Extreme, you'll have the option to allow (or not) WiFi clients. I recommend having all units updated to the current firmware (7.6.1 as of this writing). Note that extending doesn't work in daisy-chain fashion, meaning that your Expresses or Extremes will each connect to and extend from the TC. As such, you'll want the TC to be in as central a location as possible to offer the best coverage.

  • Where can i find a pdf with the dutch version of the manual for lightroom 6

    where can i find a pdf with the dutch version of the manual for lightroom 6

    I don't think it's available yet.  The English help page has a link to it:
    https://helpx.adobe.com/lightroom/topics.html
    But the equivalent page for Netherlands only links to prior versions:
    Help bij Lightroom | Help bij Lightroom
    Same for DE, FR, ES.  Maybe someone more enlightened knows if they're available somewhere else on Adobe's site.

  • With the new software for the I phone it appears 12 000 mails without reading and I can't find the solution, With the new software for the I phone it appears 12 000 mails without reading and I can't find the solution

    With the new software for the I phone it appears 12 000 mails without reading and I can't find the solution, With the new software for the I phone it appears 12 000 mails without reading and I can't find the solution

    Actually your suggestions are the ones that i have tried. i have seen that you have tried to help others with this issue and the only one that i could find that said they found the problem said that it was an ilife update issue and it fixed it and i have no available updates. i know it has to do with something in photo stream because it happens when i create a new library and it is loading the photos but i get the message before i reach the maximum 1000 photos. so i've tried updating, new library(first backing up photos and then deleting them from iPhoto), reinstalling OSX many times, running disc utilities. I called Apple the first day i had this issue and i was the first person to call them for support with the retina display and i actually had it escalated to a senior advisor and we thought we fixed the problem but we did not. i am pretty fluent in dealing with troubleshooting these type of issues and this is the first time i'm reaching out to the community. i figured now that the retina has been out some time now that there would be an obvious answer to this issue. thanks for the quick reply.
    Bebers5

  • Can't find Centered look with Top Menu

    Can't find Centered look with Top Menu
    In SharePoint 2013 (with O365 subscription), when I go to Site > Change the look I see mainly two types of layouts:
    1. Left aligned with top menu
    2. Centered with left-side menu
    Is this some sort of best practice? I'm trying to find a "look" that is centered (or full screen) with top menu - which seems to be the most common in most cloud CMS'es out there. Is there one in-built?
    I tried modifying the Stylesheet by adding margin:0 auto; to
    .ms-pub-contentLayout class, but that did not make any difference. Any help greatly appreciated!
    PS: After clicking submit on this post in previous attempt few minutes ago I got Internal Server Error.

    Hi, 
    According to your description, my understanding is that you'd like to change the layout as centered with top menu as like below link.
    https://zirlentechnologies-public.sharepoint.com/
    I've done this by editing master page .css file.
    #s4-bodyContainer {
    min-height: 100%;
    padding-bottom: 0px;
    width: 1280px !Important;
    margin-bottom: 0px;
    margin-left: auto;
    margin-right: auto;
    margin-top: 0px;
    .ms-pub-contentLayout {
    display: table-cell;
    min-width: 1240px !Important;
    Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.
    Prabhu

  • Where can i find my network key?

    where can I find my "network key"?

    One method is via the AirPort Utility, as follows:
    AirPort Utility > Select the AirPort > Manual Setup
    From the Utility's menubar: Base Station > Equivalent Network Password

  • Can't find my network utility ?

    can't find my network utility ?

    Care to share which OS you are using?
    Your profile is a complete blank.  Since you posted in the MBP forums, everyone is assuming that is what you have.

  • Can I extend a network with AE, then plug into it?

    i have checked but can't seem to answer this exact question:
    i have a time capsule and my G5 tower is plugged in using ethernet (no wifi card). I also have a MBP. i am moving my G5 one floor down where there is no ethernet plug, but the wife reaches.
    can i extend the network with an AE and then PLUG the G5 into the AE? or will i need a wifi card?
    thanks in advance
    keith

    You would use AirPort Utility to first check the settings on the Time Capsule
    AirPort Utility - Manual Setup
    Click the Wireless tab below the row of icons
    Make sure there is a check mark next to "Allow this network to be extended". Otherwise, things won't work.
    Note the exact Security setting you are using for use with the AirPort Express
    Use AirPort Utility the same way for the Express
    Click the Base Station tab to name the device, assign password, adjust Time, etc
    Click the Wireless tab:
    Wireless Mode = Extend a wireless network
    Wireless Network Name = Same name as the Time Capsule network
    Check mark next to Allow Wireless Clients
    Wireless Security = Same setting as the Time Capsule
    Wireless Password = Same password as the Time Capsule
    Confirm Password
    Update to save changes. You should have green light in 30-40 seconds and the ethernet port will be active.

Maybe you are looking for