I can't find my plant in spro,however I can use them normally!

Hi,
In spro path: Enterprise Structure>Definition>Logistics-General-->Define,copy,delete,check plant,I can't find our plants in Define Plant,however when I select check plant,I find them and nothing wrong with them. I also find these plants in the table t001W,I don't know why, our sap upgrade from R/3 4.6 to ECC 5.0 several months ago.
Thanks.
lance

Lance,
Is your system an IS-Retail system? It could be that what you are not finding in 'Define Plant' but in table T001W are infact retail 'sites' as opposed to 'plants'.
Check if you can see the missing entries in transaction WB03.
Hope this helps.
H Narayan

Similar Messages

  • How do I get my purchased Itunes, which I can see in my Itunes account library on my computer, downloaded to a folder on my computer so I can use them?

    How do I get my purchased Itunes, which I can see in my Itunes account library, transferred to a folder on my computer so I can use them?

    Hello apple1helpme,
    It sounds like you would like to download your iTunes purchases to your computer rather than streaming them from iTunes in the Cloud.  I recommend downloading your purchases directly to your computer using the Purchases page in the iTunes Store:
    Download previous iTunes Store purchases to an authorized computer
    Click iTunes Store near the top of the iTunes window.
    Click the Purchased link at the right of the iTunes Store homepage (below Quick Links).
    In the page that appears, select a category. 
    iTunes shows you which of your purchases are available for download. You can view all of your past purchases, or just the ones not currently in your iTunes library. Items already in your library aren’t available for download. If you select Music, you can view your purchases by song, artist, or album. If you’re viewing by album, click an album to see which songs on it are available for downloading.
    To download all available items, click Download All.
    iTunes 11 for Windows: Download previous purchases from the iTunes Store
    http://support.apple.com/kb/PH12491
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I am trying to add a video to my Keynote presentation on my iPad. Since I am 2 hours away from my computer to use iTunes. Is there a way to move videos to the camera roll so I can use them?

    I am trying to add a video to my Keynote presentation on my iPad. Ideally I would like to be able to play the video in the presenation sream rather than switch between apps. Since I am 2 hours away from my computer to use iTunes syncing to move them there is not an option. Is there a way to move videos already on the iPad to the camera roll on iPad 2so I can use them?

    iOS: Importing personal photos and videos from iOS devices to your ...

  • How do I register my contacts so I can use them on iMessage, Thanks

    How do I register my contacts so I can use them on imessage

    That means that the person you are tying to send a message to is not an iMessage user.
    You can't send them a message unless they have a Mac or iOS device and turn on iMessage.

  • I purchased and downloaded to ring tones from an outside source (no the App store).  How do I get these into my Sounds in Settings so I can use them?

    I purchased and downloaded two ring tones from an outside source (not through the App Store).  How do I get these loaded into the Sounds on my Settings so I can use them?

    Some apps that you download on your iPhone may possibly be to new for the iPod touch 2nd gen. I have a iPhone 5 and a iPod touch 2nd generation myself. If you plug his ipod into iTunes and restore it from a backup of your iPhone than it will download the paid apps and music that are compatible with his ipod. Hope this helps.

  • Defining Variables so that MC can use them too.

    OK I know that this is a basic question. I have variables defined in the Root directory of the flash file so that the If statement in the root directory can use them. However there are goto-statements in the movie clip right under the Root directory that also uses the same variables.  How do I define the variables so that act like 'global variables'? I mean I want to define the variables so that the code in the movie clip will use them along with the code in the root directory.

    Ok I tried that to no avail.  This is how my file is set up
    Root->Animation->Action script
    stop();    var Home;  var Roster;
    function mouseDownHandlerHome(event:MouseEvent){Content.gotoAndStop(Home);
    function mouseDownHandlerEnlist(event:MouseEvent){ navigateToURL(new URLRequest("https://spreadsheets.google.com/viewform?key=psvc5aYhLuFoImejmLioWew&hl=en"));}
    function mouseDownHandlerRoster(event:MouseEvent){Content.gotoAndStop(Roster);}
    topmenu.home.addEventListener(MouseEvent.MOUSE_DOWN, mouseDownHandlerHome);
    topmenu.Enlist.addEventListener(MouseEvent.MOUSE_DOWN, mouseDownHandlerEnlist);
    topmenu.Roster.addEventListener(MouseEvent.MOUSE_DOWN, mouseDownHandlerRoster);
    |
    Content(movieclip)
    |
    Home(movieclip)-> Action Script
    (stop();
    Home=1; Roster=3;
    var xmlholder:URLLoader=new URLLoader(new URLRequest("Home.xml"));
    ->Roster (which has similar code)
    As you can see I have a variable in the root timeline that I am defining in the embeded Movieclip.  So if there is an easy way to do a global variable or something please tell me.
    NOTE: I have looked it up and people say that I would have to use a package to define a new class and then import it.  This is a problem because I am too green to know how to do that. So if that is the only way to do it, please explain the process in small simple words.
    Thanks in advance.

  • I have the old clear apple pro speakers, and I want to find an adapter so I can use them as speakers for my iPad

    Is there an adapter I can use for the apple pro speakers that will allow me to connect them to my iPad

    It would be so much simpler if you'd provide some elementary detail in these sorts of questions, things like what do those speakers use for audio input now? If you're someone who doesn't already know the answer to that question, someone like me for example, then pretty much all I can do is this .....

  • Where do I save other ICC Profiles so I can use them in softproofing in Lightroom 4?

    I am starting to use an online photo printing service and the photos are not an accurate representation of what I see on the screen so I want to download their color profiles which are specific to their printers and various papers. Where do I save the files so Lightroom4 can access them in softproofing?

    On a mac, it's Library/ColorSync/Profiles either in the root or user level (under 10.7, that folder is hidden)**
    **In the Finder, choose Go > Go To Folder.
    In the Go To Folder dialog, type Sudo ~/Library Click Go.
    OR
    This method makes the user library folder permanently visible but requires the use of Terminal (not for the novice user):
    Launch Terminal from the Utilities folder.
    In Terminal type the following command and type Return key:
      1. chflags nohidden ~/Library
    Enter administrator password and then type Return key.
    Type Exit and quit Terminal.

  • Where do I store new fonts so I can use them in DW

    My graphics artist sent me a new font, and i added it to the windows font folder.....but still was not able to access it in DW.  where should I put it?

    Well...where to start? Folks who will be visiting your site probably won't have the font in question. So they'll see your design most likely with their browser's default font. So first off you'll need to find out if it will even be worthwile using a new font that may not be available and usable by your visitor's browsers. But there are some comon fonts that are widely available that you can use to somewhat guarantee that folks will see what you designed the way you meant it. These are called font stacks - you basically use CSS to tell the browser what font you would first prefer it to use and on down the "stack" until, if none of the fonts are available on that machine/browser, it uses it's default (serif, sans-serif, proportional, and script). So keep that in mind (if you'd like to learn more about font stacks and which fonts are commonly available, do a web search on font stacks).
    Okay that being said... here's how to add it (but be aware that others might not see your wonderful font):
    On your Properties bar, select the Font dropdown and click the edit font list. Then you can add your font from the "Available Fonts" window by selecting it and hitting the left-facing double brackets that point to the Chosen Fonts window. When your done, hit the OK button. Then start using this font stack in your website.
    Hope this helps.

  • HT204053 I had been in Canada and created my apple ID for my phone there. Since I am back in the States and had to create a second apple ID. how can I deactivate one of them can use my normal email address?

    I had been in Canada and obtained my i4s. I created my Apple ID using my normal email address.  I returned to the States and still had my Canadian number. I was told the Canadian version of the iPhone 4s would not work with any phone company in the States, so I had to purchase yet another phone and create another Apple ID. 
    I have since deactivated the Canadian number. I cannot deactivate that Apple ID though.  So I am stuck with two (2) Apple IDs. (not to mention 2 iPhone 4s)
      I would very much like to only have one assiciated with the phone I have now. Is there a way to deactivate one of the Apple ID accounts?

    Welcome to the Apple Community.
    I'm not sure you needed to purchase a new phone, you certainly didn't need to create a new ID.
    However now you have done, you can't de-activate the old account, just log into your new one and stop using your old one.

  • I am not able to access the history button that will empty my cache----they won't light up so I can use them and I am having lots of problems with function

    My computer is running stupid and I am being told by my malware bytes that I don't have any problems and when I try to clear my cache none of the buttons work after show history. THEY are all useless and won't light up to use them. I also have not been able to set up zoho as my default email address for all default emails====windows won't let me even though i disabled windows email, I still can't set up zoho.com

    When you use the private browsing feature, Firefox does not keep your history after your session. You don't need to clear history manually, you can just close Firefox.
    If you're looking for another way to clear you cache, you can use this one:
    Open the Options dialog using either:
    * orange Firefox button > Options > Options
    * Tools menu (if you have the classic menu bar) > Options
    Click Advanced, then on the Network mini-tab look for the Cached Web Content section and click the "Clear Now" button.
    If you have a large hard drive, this might take a few minutes.
    Perhaps, though, we should step back and ask for a more specific description of running wack. What's going on?

  • TS1702 I have ePub documents that won't open using iBooks, how can i get them formatted so that I can use them

    I have ePub documents that won't open using iBooks, how can i get them formatted so that I can use them

    You could try downloading a program called Calibre.  It is very good at converting files between formats.  I use it all the time to convert PDF's from work to read on iTunes when I don't want to have to keep zooming in and out to read the actual text. 
    I know that iBooks will read PDF's but they can get pretty squashed down some times. Especially if the original font was small to begin with.  So I run them through Calibre and then email them to my phone and open them in iBooks. 

  • Where can I store my VI's so I can use them in other programs

    When I write a VI where can I store this VI to use in other programs as sub-VI's and how do I retreave them.
    (Example) I build a special timing program and want to use this timing in other programs. So iI don't have to re-write this program over and over. I am using LabView 6i with some revisions. (Older cards)

    You can store them where ever you want. To retrieve them you can drag and drop them to the diagram or use "Select a VI..." from the function palette. The later will open a file dialog that will allow you to navigate to where you stored the vi. Another way to do it is to store your vi in the LabVIEW\user.lib directory, then you can retrieve your vi from "User Libraries" in the function palette.
    Hope this helps
    Brian

  • HT5787 I had my iPad repaired and now I can't update or reset it totally... It's asking another passcode ... Thou I can use it normally.... I think they replace my chip board from an old iPad , pls help me out on what to do... Don't wanna think my iPad is

    How can I reset my iPad if I forgot the pass code and how do I delete sync that was place on the iPad .... I had my iPad repaired , I think they put in a old chip board .... And now I can't reset it totally for the iPad is asking a pass code of the registered owner of the board chip... I can't even update it , thou I can use it it normally .... I'm bothered that the chip is owned by another iPad owner who sold it and had been cannibalize for repair purposes ... My problem is when I tried to reset it totally the iPad is asking a passcode that I think a passcode of the former owner of the board chip... What should I do ?

    Take it back to whoever repaired it.

  • How do I get fonts in my font book to a place where I can use them?

    I have some Hebrew fonts in my font book but I don't know how to make them useable. I don't even know how to ask 'help' how to get them out. Meanwhile the Japanese fonts and the Chinese fonts are readily available.

    I have a similar problem except I can't use any other fonts other than roman characters- all I want is to type in simplified chinese.
    As with any other language, and just explained above for Hebrew, you go to system prefs/international/input menu and check the box for the simplified chinese input method you want to use, plus the box for Show Input Menu in Finder. Then in the "flag" menu at the top right of the Finder you select Chinese and type.
    For full info on the various SC IM's, see the HELP in OS X or this site:
    http://www.yale.edu/chinesemac/pages/osx5.html#start
    If you have any questions, just ask again.

Maybe you are looking for