I can't find my "Shared Folder".

I've looked in my Public folder and tried a spotlight search and my shared folder is nowhere. I can't make a new folder in my Public folder...any ideas?

Shared folder exists at /Users/Shared/

Similar Messages

I have a windows computer and I can't find the shared folder in iTunes. Help please!

Hi there,
I have been trying to transfer music between two windows computers by using home sharing. I have turned on home share on both computers and am logged into the same apple IDs on both but I cant figure out how to access the shared music.
Please help!

diesel vdub wrote:
Stop trying to use Home Sharing, it rarely works based on postings here.
and stop using iPhones, iPads, iTunes, any Mac, AirPort devices & Pods because there are ONLY problems with them and they rarely work correctly based on the majority of postings here...

I get the "Fast Browser Plugin not loaded" message every time i run safari and I can't find an MTWB folder anywhere on my hard drive?

I get the "Fast Browser Plugin not loaded" message every time I run Safari and I can't find an MTWB folder anywhere on my hard drive? This doesn't seem to be causing a problem, but is a puzzle?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Itunes can't find my music folder

I can't install Itunes....it downloads fine from the exe file but when i try to open itunes it gives me the error msg that it can't find My Music folder. I went to the support page and it told me that if i couldn't find My Music folder to create one in My documents and download/install Tweak UI. I did and followed all the steps except when it asks me to click on My computer, then special folder and can't find the My Music folder to move it. I am using Windows XP....Please help. Has anyone ever had this problems?

I finally found a solution here: http://forums.techarena.in/windows-xp-support/983948.htm
it's stupid, you have to hold down the shift key while you open iTunes (don't just hold it while you click, keep holding it until iTunes actually shows the library dialog).

Safari 5.1 in iMac OS X 10.6.8.Adding Bookmarks to "unsorted Bookmarks" folder puts them in a black hole. I can't find the "UB" folder. Where is it? Should I add it to the folder list somewhere on the left pane? OR? Help, please!

Safari 5.1 in iMac OS X 10.6.8.Adding Bookmarks to "unsorted Bookmarks" folder puts them in a black hole. I can't find the "UB" folder. Where is it? Should I add it to the folder list somewhere on the left pane? OR? Help, please!

It looks like that the installation process of one of the applications have caused some trouble. One of them may have changed or added kext files.
For that, the Window server crashed if you try to open a non Apple application like Firefox
Start the system in safe mode by holding the shift key on power on.
If save mode is reached, perform a permissions repair with the Disk Utility.
Don't bother about upcoming warnings like "could not repair file xy" as that occur cause you use the tool on a running system and opened files can not get touched by the tool.
After repair is done reboot system to normal and try to open Firefox.
If the problem persits, please report back here.
Lupunus

I cannot sync my ipad photos to itunes on Windows 7 because it can't find a "new folder." I don't know what this means. How to fix it?

I can't sync my ipad photos to windows itunes in Windows 7 because it can;t find a "new folder" How do I fix this?

It's not entirely clear to me, but I assume that you are trying to copy photos from the iPad to your computer (as opposed to syncing photos from your computer to the iPad), possibly using the windows camera wizard ? If so then the message is saying that it can't find a folder called 'New folder' on your computer which is presumably where it copied the last set of photos to (?). I don't use the wizard to copy the photos from iPad (I do it manually via windows explorer) so I don't know how it works, but aren't you able to tell it to copy the photos to a different folder on your computer other than one called 'new folder' ? This page gives basic info for copying photos from the iPad to your computer http://support.apple.com/kb/HT4083 (it is not done via iTunes).
If you want to copy photos to the iPad from your computer then there are instructions on this page http://support.apple.com/kb/HT4236 - that is done via iTunes using the Photos tab on the right-hand side of iTunes when you've selected the iPad on the left-hand side of it

In Acrobat pro 9, I can't find staple and fold options for booklets and no matter what options I choose in the print dialogue my booklet ends up with pages upside down and out of order?

In Acrobat pro 9, I can't find staple and fold options for booklets and no matter what options I choose in the print dialogue my booklet ends up with pages upside down and out of order? I am working on a Macbook pro running OS X 10.9.4. Our printers are fully capable for booklets with staples and folds. Would love some help. Thank you!

To: ~graffiti
(This email is not intended to go on public forum -- but I wanted to respond
to you)
Thanks for your reply....FYI...I was trying to download from www.adobe.com on
the specific page that has downloads of your products.    As far as the
alternate source is concerned I am not totally sure what the capabilities it has as
I am recovering from a hospital stay and had to send my wife to retailer to
pick this up because I am accessing email from home until I return to work and
need something to work now. I don't yet have the SW. (I would have had her
buy the actual Adobe Pro 9.0 -- but it is a wapping $499 and change).
Regards,
Staurt Rednor ("Stu") - [email protected]
===========================================================
Subj:   New message: "No matter what I try can't download
Adobe Pro 9.0 or free Adobe Reader"
Date:   4/5/2009 7:38:17 PM Eastern Daylight Time
From:   [email protected]
Reply-to:   [email protected]
To: [email protected]
Sent from the Internet (Details)
SGuitar43,
A new message was posted in the thread "No matter what I try can't download
Adobe Pro 9.0 or free Adobe Reader":
http://forums.adobe.com/message/1867664#1867664
Author : ~graffiti
Profile : http://forums.adobe.com/people/~graffiti
Message:

Can't find the plugin folder to add jar file

I installed Adobe Drive 4 in Mac. I want to have our own specified Drive Connector, so I had been trying to put the jar file in the plugin folder, but I didn't even find the plugin folder.
I am using Mac, so I know I should put the file in:
In Mac OS: /Library/Application Support/Adobe/AD4ServiceManager
In Windows XP: C:\Program Files\Common Files\Adobe\AD4ServiceManager
But I can't find the plugin folder there,
Could anyone please help me?
thanks a lot,
Liang

I also installed Adobe Photoshop CS6, Bridge CS6.
The following are how it looks like in Application folder and folder /Library/Application Support/Adobe/AD4ServiceManager

I can not find mozilla firefox folder in Start All Programs how can i open firefox in safe mode i am using win7 and firefox 4.ob10 ?

i can not find mozilla firefox folder in Start>All Programs> how can i open firefox in safe mode i am using win7 and firefox 4.ob10 ?

A quick workaround - Go to Start > Run, and paste this in the box: "C:\Program Files (x86)\Mozilla Firefox\firefox.exe" -safe-mode

Can't find my Library folder

Can't find my Library folder in Lion. Would like to use it again. I went to terminal and put in chflags nohidden ~/Library as it was suggested to me but no luck. Any other suggestions?

To see it permanently open Terminal in the Utilities folder and paste the following at the prompt:
chlfags nohidden ~/Library
Press RETURN.

CS5 Bridge can't find my "Documents" folder

I'm running CS5 on Windows 7 64 bit, downloaded after purchase, if that makes any difference.
"My Documents" is available from the Favoritestab in Bridge, but I can't find My Documents or Documents anywhere in the "Folders" tab, which I would rather use, since its faster to browse a multilevel folder system this way.
I know that My Documents doesn't really exist in Windows 7 and it's more like a mirrored folder or something to help with compatibility, so I wasn't too surprised that it didn't exist in the Folders tab, but usually I can find Documents under C:/Users/MyName/Documents, but that folder doesn't show up either.
Does anyone else have this problem? Any ideas what might be causing it?

(Repost from "Can't Find My Pictures Folder in Bridge..." with corrections after further testing)
Holy SMOKES, I think I have an ANSWER - or at least enough of one so you can find your "My Pictures" folder.
I've been able to see my account's "My Pictures" folder with Bridge since I started using CS5 in December 2010. For some reason when I started using it again today (Aug. 7, 2011) I could not see it in the Folders panel any more.
My Account's root folder used to appear in the Folders panel under the Desktop folder in the tree. From there I could unfold the tree to the "My Pictures" folder under my account root and off we'd go. Then it wasn't there any more. Despite this I could click on the folder path breadcrumbs field in the upper left corner of the Bridge window and paste the path and see it, and even set it as a Favorite that I could double click in the Favorites panel, but it would not display in the Folders panel. WTF?
What I found was that in my previous session in Bridge I had unchecked the "Show Hidden Files" option in the View menu of Bridge. Once I checked that option again I was able to see my account's root folder under the Desktop folder in the Folders Panel.
So if you can no longer see "My Documents" or "My Pictures" in your Folders panel, go to the View menu and check the "Show Hidden Files" option. It's a good bet you will suddenly see your Account folder show up under the Desktop as soon as you do it.
(Note that I still cannot not find my account when I use the Folder panel to navigate to the C:\Users folder. When i go in that way all I can see is the Public folder. I think it's always been like that, as if Adobe cannot keep up with the latest Windows OS changes. Be that as it may, by checking "Show Hidden Files" you can at least get to your "My Pictures" with the Folders panel by going down from the Desktop node.)

I can't find my music folder in my ipod. please help

I synced all my folder music to Ipod classic, then I look to my Ipod classic but I can't find my music folder anywhere. Please help...

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

Where can i find the ringtone folder in the newest itunes

where can i find the ringtone folder in the newest itunes

Go to Edit > Preferences.. > check off 'Tones'. It should appear in your iTunes like the previous version.

Where can i find my shared video from my ipad to my mac book?

Where can I find my shared video from my ipad to my mac book when i upload them using cloud?

Your Mac would need to be running OS X Maveriks (10.9) and you would have to have iPhoto '11 (9.4) or Aperture 3.4 in order to see shared videos.

I can't find my "setting" folder on my Imac-- how do I get it back?

I can't find my "setting" folder on my Imac-- how do I get it back? I think it could be deleted

I'm guessing you mean the Preferences folder.
Hold down the option key and select
Go > Library
from the Finder menu bar.

I can't find my "Shared Folder".

Similar Messages

Maybe you are looking for