I can't find my usage monitor?

Hi there,
I've been logging in and out all day trying to find my broadband usage monitor on 'my services' but it seems to have vanished and not returned???? I've tried looking through the help sections, alas there wasn't anything there of any use! Is there any other way of seeing how much I'm using?
Solved!
Go to Solution.

Hi,
Have a look here at Andy_n post message 9
http://community.bt.com/t5/Other-BB-Queries/How-do​-i-check-my-download-usage/m-p/204147#M4966
He has some handy shortcuts
toekneem
http://www.no2nuisancecalls.net
(EASBF)

Similar Messages

  • I have sensory issues. How can I find an external monitor that isn't too bright?

    I have sensory issues which make bright lights very painful. Some monitors are too bright to look at. I chose a Macbook Air, in part because Apple allowed me to dim the screen, but I wanted to find an external monitor so I could use the Macbook as a desktop as well as a laptop. I recently tried an Aoc monitor, but it doesn't allow me to dim the screen enough without special software. I would rather not have to use extreme settings [Brightness 0] and special software [Easy on the Eyes] to dim the screen. I had tried comparing brightness in-store, locally, but I guess I couldn't tell because the store was full of bright lights, and because I was wearing sunglasses to cope with the bright lights. Can anyone suggest ways to find better more accessible monitors?

    There are two ways.  Likely if you have the money, the Apple monitor would likely be the best options since it powers your macbook and other stuff as well.  It is expensive though.  For a nonApple monitor the feature you are looking for is called backlight level.  The brightness control doesn't actually control brightness as might be expected because it modifies the signal.  The backlight level however does control the brightness of the backlight itself, like the buttons on a real mac.  You won't be able to use the buttons on the keyboard though.  So when you go shopping, make the salesman show you this feature in the store in the monitors interface and you should be good to go. 
    Also, if you are sensitive to bright light, did you know about the ability to assign a single key on the keyboard to invert the screen instantly?  I prefer white text on black myself.

  • Can't view BB usage monitor

    I've been getting this all day when I try to access my usage monitor
    Has anyone else had this problem ?
    Del.

    djh22 wrote:
    I've been getting this all day when I try to access my usage monitor
    Has anyone else had this problem ?
    Del.
    Hi Del.
    Just tried mine (via one of my links as usual ) and can see it fine.
    http://www.andyweb.co.uk/shortcuts
    http://www.andyweb.co.uk/pictures

  • Monitor view weird , can't find drivers or monitor model here

    I just picked up my montior at a Bargain Center , it is a new monitor , but i cant find the model here on HP's site  ,  it says on the back tag  , TSS-25BG  , and i searched and can not find this model
    My issue is that every website i go to the image is in the center and not filling the screen  , i tried Windows settings , but nothing i did changed anything , i tried adjusting the broswer settings (it look the same in Firefox , and Google Chrome)  , even on this site , everything is bunched into the middle of the screen    , in my device Manager , it just says Generic Plug and Play Monitor , so i thought maybe the driver needs to be installed , but as mentioned  , i can't find my model on this site   , any info would be appreciated
    FRESH (today) installation of Windows 7 Ultimate 64 bit on brand new 1tb Sata HD  , Fresh Firefox , fresh  Google Chrome , ALL Windows Updates done today , and completely up to date  , i don't know if this will solve my issue , but i would like the correct drivers for the monitor anyway  , any idea's ??   ... Thanks ... Jim
    EDIT:
    I just ran Belarc Advisor to scan my PC for hardware and software , and it says my montitor is a HP model 2509  , S/N 3CQ1161S5  , which is not what the back label says (what i posted above) , so i am confused  , the next question is , what 2509 model is it  , i thought i saw several ??  , for HD montiors i only saw 2  , a  2509M  and a  2509P , they are both HD Value monitors , which mine is HD , but which one ??
    EDIT2:
    After reading all the info for the 2509 montiors , i have determined that mine is the 2509M , so i downloaded and installed the Driver and Manual for that ... it did not change the view , so i am now guessing this is a Windows 7 issue to do with wide screen monitors and how it shows images , so i will try the Microsoft forums and see if i find any answers 

    Hello @JimDirt,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how you are not able to get the view you want on your 2509m monitor, and I would be happy to assist you in this matter!
    I am providing you with some steps you can try below:
    Step 1. Unplug the power cord from the back of the monitor and the wall
    Step 2. Hold the power button down for at least one minute
    Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
    Step 4. Press the Menu button on the monitor
    Step 5. Navigate to the Factory Reset option and select it
    Step 6. Try a different cable connecting your monitor to your computer
    If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Thank you for posting on the HP Forums. Have a great day!
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • How can i find my usage

    How can i find my broadband usage to see what package to change to ? 

    BT Broadband does not offer that facility. This thread may be of interest: http://community.bt.com/t5/BB-in-Home/10Gb-monthly-usage-limit-install-a-third-party-meter-No-way/m-...
    Oliver.

  • Where can I find BOM usage in a Material Master

    Hai,
           Probably a simple question but I am not able to find the BOM usage in a Material Master. I am looking at a finished product in Pharmaceuticals Industry sector.
    Which tab has this filed "BOM usage"? I expected this to be in MRP views and tried without luck.
    Can anybody help me?
    Thank you.

    Hi Visu,
    Have you looked transaction <b>CS15</b> or FM <b>CS_WHERE_USED_MAT?</b>
    Other to find out if and where a material is used in a BOM (as a header and as a BOM position) is to display the product structure. Open the material in MM03, then in Menu Environment->Product Structure. You will see all dependencies.
    Hope this will help.
    Regards,
    Ferry Lianto
    Please reward points if helpful.

  • Where can I find a new monitor for my older MacBook Pro 13.3" laptop?

    Any help for finding a place to buy a new monitor for my older Apple Pro 13.3?

    Do you need a new screen? Visit ifixit.com.
    Clinton

  • Can't find data usage for last 6 months in Analyze My Plan

    I have accounts with Spring and Verizon.  On the Sprint account page, I can easily see my data usage for the last 12 months, both on system data and roaming data (I have been notified of exceeding the monthly roaming data cap).
    On the My Verizon website, I can see the last 6-months of Overview billing, but when I click on the data usage, it says there is no data available.
    Where can I see the last 12 months of my data usage for my MiFi device?

    Mooring10 wrote:
    Only 90 day?  that seems a mere pittance in the days of NSA data collection.  My Sprint account shows me on system and roaming data for the last 12 months.  I can't ascertain any seasonal trends to my data use with only 90 days.  I'm sure you are collecting and saving more than 90 days--common, its just a programming change to show more data.  Even my utilitiy bills show me that last 12 months of usage.  Please consider revising your website to display the last 12 months of on system, roaming, and total data usage.  Thank you.
    Your bills which are available for 18 months show the total usage amount for the billing cycle of each bill.

  • Where can i find the usage on my mac

    I don't know where the usage on my mac is ?help plz

    What system are you running?  If it's Mavericks use the  ➙ About this Mac menu option.  In the first window that appears click on the More Info button.  Then click on the Storage button at the top of the window.
    If you only want to know how much space you've used on the drive and how much is still free select the drive and type Command + i.  The resulting Info window will tell all:

  • How can i find item category usage in abap program

    HI, EXPERTS
    I HEARD USAGE MAINTAINED IN ABAP PROGRAM .
    ANY ONE KNOW WHERE I CAN FIND ABAP PROGRAM FOR ITEM CATEGORY USAGE??
    THANKS.^
    Edited by: jong seok Lee on Feb 2, 2010 10:01 AM

    Hi,
    Item Category Usage: An item categories usage is defined by SAP when creating a sales order, The system determines for example, that the usage refers to a text item as oppossed to a deliverable item when you enter text in the order item rather than  a material number. Based on this usage, the system will use the item category determination to propose an item category.
    You can also find the usage in Custoemer material info record (T.Code VD51), if you want to determine any customer specific item category you may use the usage field in Custoemr master info record.
    You can devlop an user exit to determine the item category based upon usage field as well.
    regrads
    Vivek.

  • Cannot find created Alert monitor in RZ20 being asigned to any moni context

    Dear colleagues!
    I have created my own monitoring object in rz20 (of virtual type).
    But I cannot see It in any so called monitoring contexts -> segments.
    Example: there is one monitoring segment on each instance:
    SAP_CCMS_<hostname>_<SID>_<ID>
    And several monitoring contexts which assigned to that segment.
    How & where can I find my own monitoring object to be asigned to some context?
    Please help!
    Best Regards,
    Ivan

    Hi,
    Try adding faces string after your context root when you request a page.
    That is :
    http://<host>:<port>/<context-root>/faces/<what-ever.jsp>
    -Amol

  • Data Usage Monitor

    Hi
    I hope someone can give me an answer to this.
    Since signing on to BT Broadband last April I have been unable to access the data usage monitor. All I get is an 'error' message saying that the data usage monitor is currently unavailable to a small number of cvustomers'. On the phone to 'tech. support for almost 90 mins today being passed around. No one is able to tell me why I can't access this info
    Any ideas?
    Thanks

    I'm not sure if anyone knows why some customers can't access the usage monitor.  If you're on an unlimited plan, it doesn't really matter.  If you're on a limited usage plan, then you are effectively on unlimited until BT fixes the problem.

  • Can't find the BT Usage Monitor - How do you get i...

    Hi,
        I can see from the forum threads that there is a BT Usage Monitor that you can access through My BT. However, when I look at my 'My BT' account, there is no sign of the usage monitor.
    Any help in getting access to it would be appreciated.

    wolfmanii wrote:
    where is the  broadband tab? I do not seem to have this when I scroll down to the manage your services
    Hi.
    If you want a short link, I've got bookmarked :-
    https://www.bt.com/appsyouraccount/secure/cyahub.do
    hence you enter your bt.com login (unless already logged in), and follow the instructions Storm_Force gave.
    http://www.andyweb.co.uk/shortcuts
    http://www.andyweb.co.uk/pictures

  • How can we find the most usage and lowest usage of table in Sql Server by T-SQL

    how can we find the most usage and lowest usage of table in Sql Server by T-SQL
    The table has time stamp column
    StartedOn datetime
    EndedOn datetime

    The Below query has been used , but the textdata column doesnot include the name of the table ServiceLog.
    SELECT
    FROM
    databasename,
    duration
    fn_trace_gettable('F:\Program
    Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log\log_148.trc',
    default)
    WHERE
    DATABASENAME='ZTCFUTURE'
    AND TEXTDATA
    IS
    NOT
    NULL
    --AND TEXTDATA LIKE 'SERVICE%'
    order
    by cpu
    desc; 

  • How can I find out my data usage for the past 3 months?

    Greetings all, I have been a long time Verizon customer, and as such I, along with my husband, was grandfathered into the unlimited data plan. When I last spoke to a representative, they informed me that the only way we were going to be able to keep our unlimited data was by paying the full retail price ($600+) to get a new phone. So we were considering upgrading and changing to one of the newer data plans so we could still get the discounted price on the new phone, but I would like to make sure I choose one with enough data, without paying for a bunch of data that I don't use, however MyVerizon only shows me the amount I have used since the start of the billing cycle. Is there a way to find out the data usage for both my husband and myself for the last 3 months so I can choose the right option?
    Thanks in advance for your help!

        Hello sweetpea1221! How exciting that you're considering upgrading with us. mrhelper is helpful, indeed. You can view your data usage for each line under the View Bill option via your My Verizon account. You can also view your 3 month average  data usage with our Account Analysis feature. Here's a link that will be helpful in doing so http://bit.ly/vnLjqO. I'm confident that we have a great plan to match your data needs. Please let us know if you have further questions.
    TanishaS1_VZW
    Follow us on Twitter @VZWSupport

Maybe you are looking for