I can't find the Pandora app on my phone. Went to the app store but says it is downloaded. Thanks

I downloaded the Pandora app but can't find the icon on my phone. Thanks for help! and Merry Christmas!

To verify that you have it, go to the search screen (leftmost screen) and enter Pandora. If it shows up, you have it. Then search through each screen and inside each folder.

Similar Messages

  • HT4972 i already follow the instruction that u told, but all my apps gone and i need to re-install it. how can i find that backup, and backup my phone?

    i already follow the instruction that u told, but all my apps gone and i need to re-install it. how can i find that backup, and backup my phone?

    Who is "u", and how could the rest of us know what "instructions" you followed or how you backed up your phone??

  • How do you use "find my phone"?  I can't find it and I'm not sure I installed that app.

    How do you use "find my phone"?  I can't find it and I'm not sure I installed that app.

    The app is not necessary; that only for tracking from another iOS device. If you set up Find My iPhone, you can track the iPhone from the iCloud web site:
    icloud.com/find
    If you didn't configure Find My iPhone on the device before you lost it, then you're out of luck.
    Regards.

  • My XP machine is unable to load iTunes 10.5.1. It gets about halfway loaded then says it can't find Bonjour.msi. However, that file is on the computer. I tried loading the Bonjour.msi from another computer but it came up with the same message.

    My XP machine is unable to load iTunes 10.5.1. It gets about halfway loaded then says it can't find Bonjour.msi. However, that file is on the computer. I tried loading the Bonjour.msi from another computer but it came up with the same message. I also tried to remove iTunes from the add/remove sector on Control Panel but it also refused for the same reason. Help, please.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar
    The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
    Thus, if you get it to work restore to factory settings/new iPod, not from backup                               
    You can redownload most iTunes purchases by:        
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I can't find Siri on my iphone 5s when I hold the home key voice commands comes up and Siri isn't in my settings

    I can't find Siri on my iphone 5s when I hold the home button voice control comes up. When I go to settings Siri is not there. Has anyone else experienced this?

    Check Settings>General>Restrictions and see if they are turned on and Siri is restricted.

  • I have an iMac 5.1 which is running OSx10.5.8 - it runs very slowly and I can't find if there is a particular problem. In the process, I have tried to install 10.6 [I have a new iMac] and the 5.1 won't accept the install discs.

    I have an iMac 5.1 which is running OSx10.5.8 - it runs very slowly and I can't find if there is a particular problem. In the process, I have tried to install 10.6 [I have a new iMac] and the 5.1 won't accept the install discs.

    As you have discovered... you cannot use the install discs from another Mac...
    Re the iMac running OS X 10 5 8... and for your New Mac...
    See Here for keeping your Mac Happy...
    http://support.apple.com/kb/HT1147
    http://www.thexlab.com/faqs/maintainingmacosx.html
    http://www.thexlab.com/faqs/performance.html

  • I just put Facetime on my MacBook and Ipad. I can connect and recieve video but no sound. The other person can hear me. If I use Skype everything works fine. I can't find any where in Facetime to change settings for the audio. Any suggestions

    I just put Facetime on my MacBook and Ipad. I can connect and recieve video but no sound. The other person can hear me. If I use Skype everything works fine. I can't find any where in Facetime to change settings for the audio. Any suggestions

    Options for when an iOS device gets locked because of forgotten passcode:
    Restore (and reset passcode) on your device by connecting it to the last computer to which it was connected:
    iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
    If you cannot connect it to the computer to which the device was last connected (or the device was never connected to a computer) you will have to use recovery mode to completely reset the device, losing all data:
    iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)
    If recovery does not work there's:
    DFU mode: http://osxdaily.com/2010/12/04/ipad-dfu-mode/
    How to put iPod touch / iPhone into DFU mode - http://geekindisguise.wordpress.com/2009/07/16/how-to-put-ipod-touch-iphone-into -dfu-mode/

  • How can I find our photos on our iPad they are not in photo stream but have been sent from the iPhone over icloud, how can I find our photos on our iPad they are not in photo stream but have been sent from the iPhone over icloud

    how can I find our photos on our iPad they are not in photo stream but have been sent from our iPhone over icloud

    Hi...
    Tap the Photos icon in the Dock at the bottom of of the screen.
    If you don't see the photos there, tap Settings > iCloud
    Turn Photo Stream off then back on then restart your iPad.
    Hold the power button until "slide to power off" appears.  Slide to power off.  After it is off, press the power button to turn it back on

  • I'm getting prompted to update adobe acrobat 9.5.5 which I have deleted. I am currently using 10.1.13. It is still asking me to update 9.5.5 (can't find anything using it) I have tried to cancel the updates for 9.5.5 but it only recognizes the 10.1.13 ver

    I'm getting prompted to update adobe acrobat 9.5.5 which I have deleted. I am currently using 10.1.13. It is still asking me to update 9.5.5 (can't find anything using it) I have tried to cancel the update prompts for 9.5.5, but it only recognizes the 10.1.13 version. Suggestions? Am I missing something? It's driving me crazy!

    Hi ncm72,
    Could you please let me know what version of OS are you using.
    Also, go to Control Panel/System Preferences in Windows/MAC and check whether Acrobat 9 is shown under installed programs list.
    You might also try running Acrobat cleaner tool to remove all traces of previous versions of Acrobat:
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Then, install Acrobat X again from the link mentioned below:
    Download Acrobat products | Standard, Pro | XI, X
    Let me know if this works.
    Regards,
    Anubha

  • 1. Firefox Help 2. Search Refine your search Found 0 results for I have a lot of firefox downloads BUT can't find anything to click to see them - Where is the button that will show all Firefox downloads? in English in English

    1. Firefox Help
    2. Search
    Refine your search
    Found 0 results for I have a lot of firefox downloads BUT can't find anything to click to see them - Where is the button that will show all Firefox downloads? in English in English

    Tools > Downloads or {Ctrl + J} will open the Downloads window

  • Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.

    Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.

    : Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.The FP-1600 modules automatically send data on-change only. The change threshold is by default 0%. Any change, even a single least significant bit change, is sent back to the computer. If the FP-1600 firmware revision supports deadbanding (firmware revision 3.0.x and later, can be downloaded from ftp://ftp.ni.com/support/fieldpoint/Update/FPEthernet0320.zip ). Then on each analog channel or count channel you can specify a percentage change for deadbanding in FieldPoint Explorer. This is done on a channel by channel basis, by right-clicking on the particular IO module and choosing Edit this Device, then choosing Channel Configuration. Each channel (if it supports deadbanding) will have a deadband entry box on the middle right side of the screen).
    The FP-1000/1001 seri
    al network modules do not support deadbanding. The checkbox in FieldPoint Explorer is simply for how FieldPoint Explorer displays the data to the user and does not effect client programs nor the behavior of the network module itself.
    Regards,
    Aaron

  • I downloaded Premiere with no trouble, but can't find a setup or install file. What's the deal?

    I purchased a one year membership a few months ago, and installed Lightroom and Photoshop without any troubles.  I now need Premiere for my new classes, so I downloaded it with no trouble.  However, I can't find an install or setup file.  What's the deal?  I've paid for software that I can't install, and I need it for class which started about a week ago.  Help!

    Cloud Getting Started https://helpx.adobe.com/creative-cloud.html
    -Install, update or UNinstall, and launch after installing

  • Adobe premiere can not find any module capable of playing video. Update the video drivers and start again.

    Adobe Premiere can not find any module capable of playing video. Update the video drivers and start again.
    I've tried all the options suggested and the problem continues.
    What else can I do?
    Note: I had already worked before.
    Windows 8.1
    Notebook i7, 8M memory, video card Nvidia (updated).
    Adobe Premiere Pro 2014
    Please help me. Thank you.
    mailto: [email protected]

    Here is a link to an Adobe TechNote about the same issue with an earlier (much earlier!) version of Premiere Elements and Windows XP.
    http://kb2.adobe.com/cps/324/324938.html
    I'll leave it to Steve and Bill as to whether the fix offered in the link for Premiere Elements 2 would still be applicable to your version of Premiere Elements.
    Hope this is of some assistance.

  • HT5569 4S phone to IOS 7.1.2 and lost my wi-fi.   The wi-fi is on, but can't find ANY networks.   I have been through all the steps, from turning the phone on and off, resetting the network settings, resetting the whole phone, redownloading 7.1.2 an

    I updated my 4S phone to IOS 7.1.2 and lost my wi-fi.   The wi-fi is on, but can't find ANY networks.   I have been through all the steps, from turning the phone on and off, resetting the network settings, resetting the whole phone, redownloading 7.1.2 and lastly going to the Apple store for help.   They tried all the exact same steps I did, took the phone apart and looked at and said it is in "pristine" condition.   They have no idea why it isn't working, but they could offer to sell me another phone.    This is extremely annoying!    They claim it has nothing to do with the update to 7.1.2, but that is when I lost the wi-fi, so it has to be related!

    My 4s i-phone which is 2 years old cannot find any wi-fi networks not even my home network... I had the same problem two months ago but i turned off the i-phone for 8 hours and then it was okay... Now it happened again.... I tried to restart the modem but whilst my laptop is connected regularly, my phone still cannot find any wi-fi networks... I restart the i-phone, i reset it, i chose reset network settings, reset all settings, i turned it off for a whole day in case it was overloaded, i turned on the airplane mode and turned it off again, i put it into the freezer for 10 minutes within a zipped bag but 3 days now and i still cannot be connected to my home wifi... I went to the technician today and he told me that it means that wi-fi is broken and that i need to change it with a charge of 70 euro but i have to give my phone for 10 working days so as to be fixed... I am so frustrated and i don't know if i want to give 70 euro for wifi since i don't know if it would make the same problems again... 

  • After I connect with my iPhone (3GS 5.0.1) to any Ad-hoc wireless Network then walk away out of the reach of my wifi network, my iPhone can't find any wifi Network afterwards, only by turning off the iPhone completely and turning on again.

    After I connect my iPhone (3GS 5.0.1) to any Ad-hoc wireless Network then walk away out of the reach of my wifi network, my iPhone can't find any wifi Network afterwards, only by turning off the iPhone completely and turning on again.
    switching off wifi and on again or going into airplane mode did't help!
    This problem happens only with ad-hoc wifi networks not with normal ones.
    (Ad-Hoc network was created on XP Computer)

    Welcome to Apple Discussions
    Sorry, but the 169.x.x.x IP address is internally generated by the iPod (and iPhone) and indicates that a network has been detected but no IP address has been issued. Your friends iPhone was not connected to your ad hoc network either - it connected to the internet through the 3G network.
    You should read through the Vista help screens on ad hoc networking for some insight how this works. You should be able to get some ideas there.
    In the mean time, $40 or less will buy you a very capable wireless router with four Ethernet ports and will simplify your network tremendously. Having used Windows ICS for a long time, the addition of a router and a real network simplified things so much.

Maybe you are looking for

  • How to store a filepath in a database??

    hi, Somewhere in my program i have to store a path that i'll need later to load an image into a label at runtime. But, when i try to store it, in mysql, it doesn't take the escape character, i mean if i try to store "e:\mydocs", my fuction call only

  • Note 1307108 - ME5xN: Purchase requsitions not subject to overall release

    We have the following : release strategy tab is now showing even the purchase requisition is subjected to a release. we have found note 1307108 but..... we are on 603 and this note is for 604 only. I am sure that others have had the same problem, but

  • Dynamic page length in Adobe Forms for paper roll printing

    Hi gurus, I have a requirement to create an invoice printout using a thermal printer with paper roll feed. Depending on the number of line items I have on my document the page could grow to an indefinite length. Is this something we could achieve usi

  • Downsizing pixel size

    i was wondering if it was possible somehow to change your photo to have a smaller pixel size and what program you would do this in?

  • Advantage of Messaging Bridge

              Hi,           We are using WebLogic as our application server. We want to send JMS messages           to an external MQSeries listener. And we also want the JMS listener within WebLogic           can received JMS messages sent by MQSeries.