I can't finish the sycronisation with adressbook and my Cloud after I changed my Cloudaccount:

I get the followind information and the syncronisation in Adress book doesn't finish?
[NSInvalidArgumentException] *** setObjectForKey: object cannot be nil (key: /114575238/carddavhome/card/)
I have tried a lot of things and my account works with a secont Macbook and my Ipad and an Iphone without any problems.
Only with this Macbook I do have this Problem.
I deleded all adress on this Mac, i deledet the account and activatet the accout again but I still get this Massage and I do not have my two groups and miss some Adresses on this Macbook.
So I aks for help.
K. Boden

Presumably the new Mac came with Snow Leopard, and you got this prompt on the first backup of it:
|
|
It sounds like you selected +Reuse Backup.+ If so, then all your backups were consolidated into the same "sequence." As detailed in #B5 of Time Machine - Troubleshooting (or use the link in *User Tips* at the top of this forum), you could not have continued backing-up the iMac. As the backup volume filled-up, eventually all the old backups of the iMac would have been deleted to make room for new ones from the Pro.
If you selected +Create New Backup,+ then none of the iMac's backups would have been deleted while the Pro was running a backup, but you could have continued backing-up the iMac.

Similar Messages

  • I purchased an ipad for my husband in 12/2011 - it was stolen last night and i can't find the receipt with insurance and warranty

    I purchased an ipad for my husband in 12/2011 - it was stolen last night and i can't find the receipt with insurance and warranty.

    The warraty doesn't cover lost or stolen.
    If the iPad was running iOS 7, the thief/finder will not ever be able to use it.
    iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    Apple (and no one else) can not assist (with serial number or iCloud) in finding a lost or stolen iPad.
    Report to police along with serial number. Change all your passwords.
    These links may be helpful.
    How to Track and Report Stolen iPad
    http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipadhttp://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
    Reporting a lost or stolen Apple product
    http://support.apple.com/kb/ht2526
    What to do if your iOS device is lost or stolen
    http://support.apple.com/kb/HT5668
    iCloud: Locate your device on a map
    http://support.apple.com/kb/PH2698
    iCloud: Lost Mode - Lock and Trace
    http://support.apple.com/kb/PH2700
    iCloud: Remotely Erase your device
    http://support.apple.com/kb/PH2701
    Report Stolen iPad Tips and iPad Theft Prevention
    http://www.stolen-property.com/report-stolen-ipad.phphttp://www.stolen-property.com/report-stolen-ipad.php
    How to recover a lost or stolen iPad
    http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
    How to Find a Stolen iPad
    http://www.ehow.com/how_7586429_stolen-ipad.htmlhttp://www.ehow.com/how_7586429_stolen-ipad.html
    What NOT to do if your iPhone or iPad is lost or stolen
    http://www.tomahaiku.com/what-not-to-do-if-your-iphone-or-ipad-lost-or-stolen/http://www.tomahaiku.com/what-not-to-do-if-your-iphone-or-ipad-lost-or-stolen/
    Apple Product Lost or Stolen
    http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
    Oops! iForgot My New iPad On the Plane; Now What?
    http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
    If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
    How to Find Your iPad Serial Number
    http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-numberhttp://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
    iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
    http://support.apple.com/kb/HT4061
     Cheers, Tom

  • I believe my ipads hard drive corrupted when i went from my macbook to a pc...I can get to the screen with cord and itunes but cant get past there to desktop of ipad...Any help would be appreciated....

    I believe my ipads hard drive corrupted when i went from my macbook to a pc...I can get to the screen with cord and itunes but cant get past there to desktop of ipad...Any help would be appreciated....

    Try using this article to help with your iPad not showing up in iTunes---
    http://support.apple.com/kb/TS1538     -This deals with the device not being recognized in iTunes for Windows
    The following steps work well with iPod but i would try them for help with your iPad issue:
    Try connecting your iPad to another USB port directly on the computer. Verify that you're connecting it to a high-powered USB 2.0 port on your computer to be sure iPad is getting power. If you're connecting to a Windows laptop computer through USB, connect the laptop to a power outlet before connecting your iPad. Also, see iPod not recognized when connected to Windows laptop over USB to be sure that your USB ports are supplying enough power.
    Avoid connecting to an external USB hub. If a hub must be used, make sure the hub is USB 2.0, and that it has its own power supply. Also, make sure the hub is connected to a high-power USB 2.0 port on your computer.
    If the issue persists, try disconnecting other USB devices from the computer such as printers, cameras, scanners, external hard drives, and USB hubs to determine if there is a conflict in the USB chain.

  • How can you keep the caps lock on and not unlock after each letter?

    How can you keep the caps lock on and not unlock after each letter?

    I'm not aware of an online keyboard that is available and can do this. Most likely it would need to be a function of the app itself (which can and sometimes do add functionlaity to the keyboard).
    Wireless keyboard might handle that, if that's an option for you.
    I work in IT myself, and IMHO the iPad isn't the ideal device for coding or scripting work.

  • How can i get the address with drag and drop from address book into pages?

    I want to creat a letter withe the new pages. Normaly it was possible to put the adress from the adressbook with drag and drop into the letter. So it was possible to create one letter with many different adresses. But now I didn't find this function any more. How to do ist now?
    Withe best regards and I'm sorry for may bad english
    Klaus

    Sounds like you "upgraded" to Pages 5.
    Apple has removed over 90 features from Pages 5.
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    Pages '09 should still be in your Applications/iWork folder.
    Archive/trash Pages 5, after Exporting your files to Pages '09, and rate/review it in the App Store, then get back to work.
    Peter

  • Can't run the webcam with MAX and LV12

    Hi,
    I would like to configure and run a webcam via Measurement & Automation Explorer and Labview 2012.
    I am working in windows 7 Ultimate (64bits).
    Labview: 2012 (32bits) V 12.0f3
    MAX: V5.3.3f2
    Vision Acquisition Software: 2011
    I installed Labview 2012 without issue. Then i installed Vision Acquisition Sofware 2011 to have the library neccesary for the webcam. But, before the end of the installation. I got this error screen ( see bellow Windows_Firewall_Might_Be_Enabled.jpeg): WARNING: Windows Firewall Might Be Enabled. So, i tried to turn OFF, turn ON my Windows Firewall. I have still had the same error screen even if I tried to reinstall Vision.
    Any ideas about this issue?
    Then I ran Measurement & Automation Explorer, go to Devices and Interfaces and NI-IMAQdx Devices. I can see my webcam ( Logitech HD Webcam C270). Double click on it. And i have the first error screen :cwimaq Errors loading control. The default settings for the control will be used. Then this error message: cwimaq Error creating default control. And i have a Unexpected Error (see picture bellow). I tried couple times to restart the computer. But It is still the same issue. So, I really don't know why it is doing that. Any ideas?
    And when I run Labview and try to go in propreties of Vision Acquisition Express: Labview displayed : Unable to view properties.So I can't use my webcam with Labview for the moment. Furthermore, I downloaded ni_imaq_usb_installer_86 to get the  good library for the usb. 
    Thanks for helping me,
    Best regards,
    Francois
    Attachments:
    Error_webcam_Labview.7z ‏235 KB

    I found this topic http://digital.ni.com/public.nsf/allkb/244E6DDF9A92A6CD8625730100629047
    Application
    Programming
    Interface (API)
    Vision Development Module Version
    5.0
    6.0
    6.1
    7.0
    7.1
    8.0
    8.2
    8.2.1
    8.5
    8.6
    2009
    2010
    2011
    2012
    LabVIEW
    2012
    N
    N
    N
    N
    N
    N
    N
    N
    N
    N
    N
    N
    N
    Y
    So, I am thinking this is probably my issue. Because I installed Labview 2012 but my VDM is 2011.
    Anybody has already installed VDM 2011 on Labview 2012, and it is or not working?
    Regards,
    Francois

  • 9i and 8.1.7: where can i find the file crdbSID.sql and crdb2SID.sql after installati

    The two files should be saved under the directory $ORACLE_ADMIN/<sid>/
    but i couldnot find them after installation. is that because i missed
    creating scripts step during installation?

    Are you sure that your table name is lower case
    Can you do the following commands in SQLPLUS
    desc security
    desc "security"
    desc SECURITY
    Also, can you tell us more about what your are doing with TpoX

  • Can I browse the internet with my Apple TV?

    I have an older ATV, maybe 3 years old, can I browse the internet with it and if so, how??

    If you have an iPad 2 (or later), iPhone 4s (or later), iPod Touch 5. You can use mirroring.
    You can also mirror a recent Mac or use airparrot on older hardware or PC

  • [Solved]Can't finish The Hobbit installation with virtual drive

    Is there any way that I could combine two iso files into one so that I could finish The Hobbit installation process.  I always get stuck at the point where it asks for the second disk and gnome-disk-utility won't unmount the first ISO because it's still in use by the installation process.
    I tried doing this
    $ sudo mount -t iso9660 -o loop disc1-mountpoint
    $ sudo mount -t iso9660 -o loop disc2-mountpoint
    $ sudo mkisofs -l -J -R -o dvd.iso disc1-mountpoint disc2-mountpoint
    and here's what I got
    I: -input-charset not specified, using utf-8 (detected in locale settings)
    Using BILBO000.ICO;1 for /bilbo.ico (bilbo.ico)
    Using AUTORUN000.INF;1 for /Autorun.inf (Autorun.inf)
    genisoimage: Error: '/media/dc/bilbo.ico' and '/media/live/bilbo.ico' have the same Rock Ridge name 'bilbo.ico'.
    genisoimage: Error: '/media/dc/Autorun.inf' and '/media/live/Autorun.inf' have the same Rock Ridge name 'Autorun.inf'.
    Unable to sort directory
    NOTE: multiple source directories have been specified and merged into the root
    of the filesystem. Check your program arguments. genisoimage is not tar.
    So here's what I'm currently trying right now.
    $ cat HobbitCD1.iso > The_Hobbit.iso
    $ cat HobbitCD2.iso >> The_Hobbit.iso
    Okay, so doing that didn't return any errors, now to see if I can finish the installation with the new ISO file.
    Nope it still asks for disk 2.  So the real question is how can I force the first disk to unmount so that I can replace it with the second disk?
    Last edited by lspci (2012-08-23 22:40:14)

    progandy wrote:Why don't you try this?
    Manually mount the first iso image, begin installation, forcibly unmount old iso, mount new iso, continue installation.
    Oh, you can forcibly unmount something?! 
    (read the manpage for umount)
    Oh, whaddaya know, you can. 
    from umount's manpage
    -f Force umount (in case of an unreachable NFS system). (Requires kernel 2.1.116 or later.)
    I dunno why I didn't think to check the manpage for umount.  Sorry, my bad.
    EDIT: Okay, so forcibly unmounting the iso didn't work.  I was able to force umount, but I couldn't disassociate the /dev/loop2 from the HobbitCD1.iso file.  losetup doesn't seem to support forcing.  I think that I better just install this under Windows and then copy and paste the installed files to my external hard drive and then move them onto my laptop from there.  =/ Not really what I was looking for, though.
    Last edited by lspci (2012-07-30 11:53:58)

  • Good afternoon! I purchased a few months the basics of adobe photoshop package with the CC and Lightroom, but has expired, and was made the annual package. What can I do to solve this problem. I have two weddings being edited and now I can not finish the

    Good afternoon! I purchased a few months the basics of adobe photoshop package with the CC and Lightroom, but has expired, and was made the annual package. What can I do to solve this problem. I have two weddings being edited and now I can not finish the work. I thank you.

    Renew the subscription?

  • I'm importing more than 1800 photos, and it got stuck with 382 photos left to be imported. How can I finish the import completely?

    I'm importing more than 1800 photos, and it got stuck with 382 photos left to be imported. How can I finish the import completely?

    What version of iPhoto?
    Are these photos different in any way? Black and White, for instance?
    Regards
    TD

  • How can I get the variable with the value from Thread's run method

    We want to access a variable from the run method of a Thread externally in a class or in a method. Even though I make the variable as public /public static, I could get the value till the end of the run method only. After that scope of the variable gets lost resulting to null value in the called method/class..
    How can I get the variable with the value?
    This is sample code:
    public class SampleSynchronisation
         public static void main(String df[])
    sampleThread sathr= new sampleThread();
    sathr.start();
    System.out.println("This is the value from the run method "+sathr.x);
    /* I should get:
    Inside the run method
    But I get only:
    Inside*/
    class sampleThread extends Thread
         public String x="Inside";
         public void run()
              x+="the run method";
    NB: if i write the variable in to a file I am able to read it from external method. This I dont want to do

    Your main thread continues to run after the sathr thread is completed, consequently the output is done before the sathr thread has modified the string. You need to make the main thread pause, this will allow sathr time to run to the point where it will modify the string and then you can print it out. Another way would be to lock the object using a synchronized block to stop the main thread accessing the string until the sathr has finished with it.

  • I can't finish the installation of Itunes for windows. at the end of the installation I get an error. How can I install this programm?

    I can't finish the installation of Itunes for windows. at the end of the installation I get an error. How can I install this programm?

    See if the user tip: https://discussions.apple.com/docs/DOC-6562 helps out with your problems.

  • Pages with Adressbook (and Bento) – who can help?

    I created the fields in my pages document as required. I imported an address from addressbook. That worked.
    Then I imported an address from addressbook that I previously imported in adressbook from Bento (in Bento). It imported the Name and company but not the address like street and city. It seems that it does not recognize the address as an address?
    Can it have something to do with the German version? Because the address created in Addressbook worked, the one from Bento not. What can help?
    Thanks for helping me,
    Michael

    Michael Munich wrote:
    New idea: I opened the .csv with TextEdit and replaced the ; with ,
    at the moment I am in the middle of the importing process in addressbook and hope this will work.
    What will you do for decimal numbers containing a comma ?
    But I assumes that there is no such datas in a list of address.
    This huge oddity: a program from Apple and a program from a 100% Apple's subsidiary which don't speak the same language is already reported to Bugs hunters.
    Yvan KOENIG (from FRANCE vendredi 8 août 2008 17:23:54)

  • After I factory reset my Iphone 4s, I can't finish the step where it ask for WIFI Network, I guess it don't detect WIFI and can't connect to iTunes also. What should I do?

    I can't finish the step after I factory reset my iphone 4s because I can't get thru with the CHOOSE YOUR WIFI NETWORK

    If you can't see your WiFi then is your router broadcasting the SSID or do you not get to that point?

Maybe you are looking for