I can't flash my nokia n900...please help!

Hello people!....I need help to flash successfully my nokia n900..All this started when I installed a unstable app in the phone....After I installed the app I reboot  the phone but the phone never booted up...just runs until the nokia logo....After that the phone restarts  several times and I have tried the flasher but it didnt work...why?, because when I take the batery out and put again...the phone turns on by itself and restarts several times....in another words,I can put my phone in flashing  mode......I appretiate your help.

saintseiya4 wrote:
Hello people!....I need help to flash successfully my nokia n900..All this started when I installed a unstable app in the phone....After I installed the app I reboot  the phone but the phone never booted up...just runs until the nokia logo....After that the phone restarts  several times and I have tried the flasher but it didnt work...why?, because when I take the batery out and put again...the phone turns on by itself and restarts several times....in another words,I can put my phone in flashing  mode......I appretiate your help.
then try a clean reflash of the device with the global variant, and then do a vanilla flash as well to erase the emmc completely.
before you do this, be sure to connect to your pc in mass storage mode and take any files off the device you want to keep as this will take your device back to factory state and erase EVERYTHING.
HERE FOR DIRECTIONS TO FLASH YOUR N900
you will need to be sure that you have a non-64 bit pc.
1. Download the Flasher
2. Download the latest firmware image for your N900  (you will need your IMEI of the device)
3. when you save the global variant of the firmware to the "flasher-3.5" folder, save it as "pr1.2.bin"
4.  When you save the vanilla file of the firmware to the "flasher-3.5" folder, save it as "vanilla.bin"
5.  Turn your phone off
6.  launch the flasher-3.5 program
7.  type this command:   flasher-3.5.exe -F pr1.2.bin -f
it will then scroll a bunch of jiberish and then say it is looking for a unit.
8.  with the phone still off, hold slide the kb open and hold the "U" button while you connect the usb cable to the phone.  continue holding the "U" until you see the faint "NOKIA" logo and/or the USB connection symbol in the top right.  The flasher will find the device and automatically flash the unit to the original rom
9.  after about 1.5 minutes, it will be complete.  DO NOT DISCONNECT YOUR UNIT!
10.  type this command:   flasher-3.5.exe -F vanilla.bin -f -R
11.  now it should reflash the deviece and wipe the emmc clean of EVERYTHING.  after it reboots, you can disconnect it.
before you load any software into the device via restoring from your backup, be sure to try the backlight settings again and see if it is still having the issue.
if the issue is gone then there was some software that you had installed that was affecting it.   if the issue is still there, then have your device replaced.
if the issue is resolved, then a couple of things.
1.  depending on how many applications you had installed, you can go back and install them one at a time and re-sync your contacts/calendar seperately.  or you can do a restore from your back up.
when you do the restore, be sure that you look at all the applications in the list that it is going redownload and install before you allow it to, to be sure they are the only applications you want.
2.  mark this post as solution and post a kudos to any post above that has helped you in the effort to resolve your issues as a happy thanks to thier efforts in giving you free support for your device that NOKIA did not give you. 

Similar Messages

  • Can't flash kernel in nokia n900, please help.

    My nokia N900 has suddenly has gone into weired loop of showing error message>>rebooting>>again error meesage...
    message says "can't flash kernels, required files not found
    Guru Meditation #00000025.62017712"
    I tried flashing and downloaded "Flasher", "WinFlasher_3.12.1.exe", since I've windows 7 in 32 bit operating system.
    It opens properly, but after i give first command "flasher-3.5.exe -F pr1.2.bin -f". It shows prompt command and says nothing about detecting, as lot of post refers to.
    Please someone help me on this.
    Solved!
    Go to Solution.

    First, Thanks a lot for replying.
    Second, I'm not very familiar with linux. I followed the instructions posted by ceroberts75 as sticky at the first page. 
    1. Download the Flasher
    2. Download the latest firmware image for your N900  (you will need your IMEI of the device)
    3. when you save the global variant of the firmware to the "flasher-3.5" folder, save it as "pr1.2.bin"
    4.  When you save the vanilla file of the firmware to the "flasher-3.5" folder, save it as "vanilla.bin"
    5.  Turn your phone off
    6.  launch the flasher-3.5 program
    7.  type this command:   flasher-3.5.exe -F pr1.2.bin -f
    it will then scroll a bunch of gibberish and then say it is looking for a unit.
    8.  with the phone still off, hold slide the kb open and hold the "U" button while you connect the usb cable to the phone.  continue holding the "U" until you see the faint "NOKIA" logo and/or the USB connection symbol in the top right.  The flasher will find the device and automatically flash the unit to the original rom
    9.  after about 1.5 minutes, it will be complete.  DO NOT DISCONNECT YOUR UNIT!
    10.  type this command:   flasher-3.5.exe -F vanilla.bin -f -R
    11.  now it should reflash the device and wipe the emmc clean of EVERYTHING.  after it reboots, you can disconnect it.
    My problem starts after step 7. It doesn't scrolls any thing nor it says its looking for the unit. It keeps going back to prompt command.
    I hope somebody can tell me what mistake I'm doing.
    Thanks.

  • I have an MS word doc saved from a Macbook in my flash drive. Now i want to print this from an IBM compatible laptop. problem is -- I can't access the file. Please help.

    I have an MS word doc saved from a Macbook Pro on m flash drive. Now i want to print
    th same doc from an IBM Compatible laptop. Problem is, I can't access the file. Please help.

    I suggest you post your question on Microsofts own forums for their Mac products as it's their software you're having issues with:
    http://answers.microsoft.com/en-us/mac

  • Flash MX - CS4 Upgrade - Please help

    Hi,
      We bought yesterday the Flash CS4 upgrade and we thought that we have the Flash MX 2004 professional but we can't found the license. We only have the license for the Flash MX professional. How can we fix this? Can we upgrade to CS4?  Please help we need to use Flash CS4 this weekend.
    Thanks,
    Cesar
    Texas

    inkydmark,
    You may wish to roll back from Yosemite and wait to see whether the issues will be solved and reported as such.
    Weeding out in older plugins seems to have helped some in some cases. It also seems that JAVA Runtime may be involved, for some it seems to help to roll back to an ealier version, for others to update to the newest.
    All the above is more or less hearsay so far, with no definite final confirmation.
    In any case, there is something to be sorted out by someone. Yosemite was made long after CS4, so it may be difficult.
    There is a way round an even worse issue shown in post #2 here:
    https://forums.adobe.com/thread/1610655

  • Bad bios flash!!! Please help me?!!!

      hey guys if im not supposed to make a new thread please tell me.
    So i recently update my bios on my z77 gd55 using m-flash and after the update it didnt boot and its still not booting, all my fans and hdds and everything is on but the display is off. What can i doo??? Im 15 so i dont have money to go around buying motherboards! How can i fix my rig? Please help 

    Quote from: Froggy Gremlin on 13-August-13, 10:24:52
    POST is the initial checkdowns prior to the point the OS initiates and the UEFI/BIOS can be accessed. Boot is the actual entering into the OS and desktop.
    In your manual, it should explain the location of the clear CMOS button or clear CMOS jumper location.
    If nothing helps, the choices are few. Have a shop in your area that has an SPI flash programming device fix it for you, or send the board to an MSI Service Center after submitting and receiving an RMA authorization.
      >> How To Contact MSI <<
    so should i contact technical support or rma cus i only want to rma if i really have to!?

  • I bought new Macbook Pro 13" around two months before .My Apple ID is working on all other things except app store . It is buffering for a lot of time and lastly coming on screen " can not connect to app store " Please help me

    I bought new Macbook Pro 13" around two months before .My Apple ID is working on all other things except app store . It is buffering for a lot of time and lastly coming on screen " can not connect to app store " Please help me

    Have you tried repairing disk permissions : iTunes download error -45054

  • My mom put my ipod 5th gen in the house somewhere and it was turned off. It is connected to the internet in the house. How do i turn it on with the Findmyiphone or something else? It was an expensive gift and we can't find it now! Please help!

    My mom put my ipod 5th gen in the house somewhere and it was turned off. It is connected to the internet in the house. How do i turn it on with the Findmyiphone or something else? It was an expensive gift and we can't find it now! Please help! How do i turn it on without finding it because she can't remember where it was.

    That is so dumb...Apple is the best and most techinological company IN THE WORLD and they don't have the time to invent something like that? HUH? All they are worried about is making the "Worlds best Phone" and they can't take the time out to help their users or anybody that has their products. All they have is "Find mt Iphone" Well they should step up and do something else to help people like me out. Find a way to turn it on and you can find it or find a way to turn it on remotely.
    Thank you for your replys

  • "It is formatted incorrectly, or is not a format that iBooks can open". Can anyone help me with this message of a book that I purchased on iBooks, read, highlighted in the book and now I can't open it anymore. Please help!!!

    "It is formatted incorrectly, or is not a format that iBooks can open". Can anyone help me with this message of a book that I purchased on iBooks, read, highlighted in the book and now I can't open it anymore. Please help!!!

    Mine does the same thing occasionally, is your phone jailbroken? Sometimes it will work if you delete the book and reinstall it or put your phone into airplane mode then turn it back off.

  • IPhone 4s not being recognized and cannot be activated for service--what does this mean? I can't sync with iTunes. Please help

    iPhone not being recognized and cannot be activated for service--what does this mean? I can't sync with iTunes. Please help.
    When I connect iPhone to USB iTunes is giving me the above message. Please advise if you know the fix.
    Thanks,
    Lina1116

    did you find a fix?

  • I just downloaded the newest version of Itunes.  I can't delete anything and I can't sync to my MP3 player.  I tried deleting it and installing an earlier version of Itunes but it can't read the library.  Please help.

    I just downloaded the newest version of Itunes on my Windows 7 PC.  I can't delete anything and I can't sync to my MP3 player.  I tried deleting it and installing an earlier version of Itunes but it can't read the library.  Please help.

    With iTunes 11 on PCs the drop-down menus are hidden by default - control-B should get the menus to show
    This screenshot is from a Mac, but it should be similar on a PC :

  • Fire Wire: MBP OS X.4.11 Can't see external devices. PLEASE HELP!

    Fire Wire: MBP OS X.4.11 Can't see external devices. PLEASE HELP!
    My MBP will not "see" my new MB or my back-up drive—both connected via a firewire 400 (6 pin) cable. Both running Tiger X.4.11
    I have used this cable to connect my MBP and a TiBook in the past as well as to back-up onto the LaCie e-drive.
    I have run "disk repair" and "permissions" on both machines.
    BTW—"permissions" are regularly out of wack on the MBP. But, the disk is OK according to Disk Utilities.
    I also cannot put the machine to sleep after logging out. Has a hard time shutting down as well. Sometimes I need to force a re-boot.
    Can't run Disk Doctor because I don't have a bootable disk yet. It's coming via snail mail.
    The new MB "sees" the e-drive connected with the same cable.
    I can't transfer my files to the new MB nor can I back up.
    Is it time for a "clean install"? Makes me nervous that I cannot backup before trying anything drastic.
    Can someone please help me?
    Thanks in advance.
    Tek

    Put the more recalcitrant computer into Target Drive mode by starting it with the T key down until you see the yellow on blue screen. Then connect it to the other machine by firewire cable while both are already awake.
    I hope that you did not do any upgrades while you had external drives connected... that is an automatic problem. Always disconnect from externals and accessories before doing any upgrades. Always back up before doing any upgrades.
    Firewire networking is not the same as using a computer in Target Disc mode. In Target disc mode, you are using the internal drive of the Td computer as an external. That should allow you to run disk utility. Do use the proper disc utility version for the OSX version that is on problem drive. ie don't use the Leopard disc utility for the Tiger disc or vice versa.

  • I am looking for macbookpro mid 2010 HDD exact specs so that i can upgrade it to 1TB. PLEASE HELP ME  about OEM apple brand or which one is better.Thanks

    I am looking for macbookpro mid 2010 HDD exact specs so that i can upgrade it to 1TB. PLEASE HELP ME  about OEM apple brand or which one is better?.Thanks

    clintonfrombirmingham Your information is not correct.
    http://kb.sandisk.com/app/answers/detail/a_id/8142/~/difference-between-sata-i,- sata-ii-and-sata-iii
    I have a sata II samsung 5400 rpm and i am only able to transfer at 85 read right speed.
    On my main drive sata III ocz agility 3 ssd i get 120 mb read and 180 write.
    Neither of these come close to the 300 mb promised. So it wont matter if he got sata II or III
    The speed came from Blackmagic Disk Speed Test

  • Since I've uploaded IOS 7 and can't open PDFs now. Please help.

    Since I've uploaded IOS 7 and can't open PDFs now. Please help.

    Try #12 and #4 and go through the rest if necessary:
    http://helpx.adobe.com/dreamweaver/kb/troubleshoot-javascript-errors-dreamweaver-cs4.html

  • How do you change the language to English in Photoshop CS5 after installation is completed? When I installed the program, English was not one of the language options so now everything reads in spanish. I can not read in spanish. Please help!!

    How do you change the language to English in Photoshop CS5 after installation is completed? When I installed the program, English was not one of the language options so now everything reads in spanish. I can not read in spanish. Please help!!

    Hi mujabee1111,
    Please uninstall the application from your machine and then use the link below to download the installer for the CS5 download in English language:
    Download CS5 products
    Regards,
    Sheena

  • How to add fingerprint to 5s? I can`t press add a fingerpint please HELP ios 8,0,2

    How to add fingerprint to 5s? I can`t press add a fingerpint please HELP ios 8,0,2

    Hi, SillDeividas.  
    Thank you for visiting Apple Support Communities. 
    Here is an article that I would recommend taking a look at for this issue.  
    Get help with Touch ID
    Make sure that you're using the latest version of iOS.
    Make sure that your fingers and the Home button are clean and dry.*
    Cover the Home button completely. Don't tap too quickly, don't press down hard, and don't move your finger while Touch ID is scanning. Make sure that your finger touches the metal ring around the Home button.
    If you're using a case or screen protector, make sure it doesn't cover the Home button or the surrounding ring. If it does, remove the case or screen protector and try again.
    Tap Settings > Touch ID & Passcode and make sure that iPhone Unlock or iTunes & App Store is on. Also make sure that you've enrolled one or more fingerprints.
    Try enrolling a different finger.
    If you can't enroll any of your fingers, take your device to an Apple Retail Store, Apple Authorized Service Provider, or contact AppleCare for help.
    * Moisture, lotions, sweat, oils, cuts, or dry skin might affect fingerprint recognition. Certain activities can also temporarily affect fingerprint recognition, including exercising, showering, swimming, cooking, or other conditions or changes that affect your fingerprint.
    iPhone 5s: Using Touch ID
    http://support.apple.com/kb/HT5883
    Cheers,
    Jason H.

Maybe you are looking for

  • Home Sharing issues with Windows PCs

    I've had an Apple TV2 for over a year.  It has been working fine with no issues at all.  I use an old laptop running WinXP as my "media server" and it has worked fine up until the last few of months. Progressively, over the last 2-4 months it has bec

  • Problem with Deployments of web service Project as EAR in weblogic console

    Hi All :-) I was facing the problem with the Deployments of web service(java class) as EAR.I created the one web project associated with EAR project. After my development i exported this project as EAR and deployed the same on the weblogic console...

  • Help. My site published but is not saved in iWeb

    I am completely flummoxed. I put together a one-page site yesterday and published it to Mobile Me fine. But when I went into iWeb today to make some changes the finished, published version of the site is not there. All I have is the original template

  • HOW I CAN CATCH AN EXCEPTION??

    HI FRIENDS I HAVE A PROBLEM I AM USING THIS CODE try fileTemplate=fileReader(TemplatePath); catch (FileNotFoundException ioex) where filereader is a function to read files. but on complining i am getting this error exception java.io.FileNotFoundExcep

  • Adding new Hub Transport server in existing environment

    Hi everyone, Currently we have 5 exchange servers 2010 : 2 CAS Servers (Virtual) 2 MB and Hub Transport servers (Physical) 1 Edge server in DMZ. (Virtual) Now I have added 2 more servers with MB and Hub Tranport Roles (VIRTUAL) and want to configure