I can't found ActiveX for Camera DVR Remote Management Sýtem

Dear Firefox
Tôi xài FF 8.0.1 tôi vào đầu ghi Camera DVR Remote Management System nhưng thông báo no plugin, ở trang web này có down ActiveX Setup. nhưng chạy xong vẫn không vào được
Làm ơn hỗ trợ

ActiveX only works in IE and not in Firefox. that mean Firefox can see Camera on the Internet ?

Similar Messages

  • Can not found drivers for HP 2000-2125TU Notebook pc....please help

    I have bought my HP 2000-2125TU notebook pc 2days ago...but i can not found any driver of that model...please help...

    Hi,
    Geeeezzz, only 2 days and you need its drivers already - is it broken ? You can find its driver in the following link (your machine is in there):
      http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&prodTypeId=321957&pro...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Where can I found out for sure if RedHat 5.8 is certified for 11gR2?

    I found note 1304727.1 which states that OS versions and minimum levels for 11.2 include Red Hat Enterprise 5 Update 2 and Higher. Our vendor said the highest certified was 5.7. Is there anywhere that lists 5.8 specifically as being certified and what the kernel should be?
    Thanks

    Pl identify exact version of 11gR2 and whether OS is 32-bit or 64-bit.
    I do not believe you will find a document that specifically states 5.8 is supported. All you will see is a minimum level
    http://docs.oracle.com/cd/E11882_01/install.112/e24321/pre_install.htm#CIHFICFD
    Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
    5.8 should work as well as 5.7
    HTH
    Srini

  • Where can I found download for Boot Camp assistant. app?

    I'd installed WindowsXP a few years back on 24" iMac it did not work well, uninstalled then I lost Boot Camp assistant out of Utility folder completely, now I just bought a 27" iMac and want to use 24" to re-install WindowsXP or may be Windows 7, but no Boot Camp, can I reinstall Boot Camp Assistant app.? if so where do I find it?

    Get Pacifist and use it to install Boot Camp assistant from your 10.6 installation disk.
    http://www.charlessoft.com/

  • Syncronization: How can i store mail for different accounts remotely, and copy most important mails manually to local folders on two devices?

    Hello. I have two devices and two accounts, so what i want is this:
    I only want to store mail from both accounts in a remote place and copy most important mails to local folders.
    (I will be grateful for any ideas as to where/how this "cloud" can be - specially free places)
    * Can I have a copy of these local folders in both devices and the remote storage?
    * Could i synchronize devices so that: when i move a mail to a local folder in any device, its copied to the same folders in
    the other device and the remote storage place?
    * The remote storage place will have many other folders. When I open Thunderbird, I also want to see these and the mail
    inside, and also be able to move mail from the inbox to these folders.
    * One of the accounts is gmail. In Account Setting tool, there is an option for synchronization. If there is no easier way, I can have mail for other account copied to gmail, and just syncronize gmail mail. For this, how will I copy my present folder structure to gmail. And how can I syncronize the local folders on the two devices?
    Thanks in advance.

    The first awkwardness I see is that there's no obvious format in which to store messages remotely such that you can work with them in an email client. It may be possible to set the "Local Directory" option in the account in Thunderbird to point at some remote folder (DropBox comes to mind) but I have never tried this and I'd be nervous about what happens if connection can't be made, or if you happened to access it from two different places simultaneously. The other concern is that mail stores get big, quickly, and you'd be forever uploading and downloading large (multi gigabyte) files. Thunderbird stores what looks like a folder containing many separate messages as one big file, so there's no simple opportunity for incremental changes to be up/down loaded.
    The whole idea of Local Folders in Thunderbird is to detach messages from servers, so they don't track what happens on servers. I say this to point out the distinction between files stored locally and permanently ("Local Folders"), versus cached copies of online files ("synchronized"). It's not safe to regard your synchronized folders as permanent.
    So, synchronized folders on an IMAP server are "mirrored" in Thunderbird so you do have a local (albeit temporary and transient) copy of messages; this is done mainly to avoid repeatedly downloading messages if you re-read them, and it makes searching faster an more efficient. But these "synchronized" message track what's being done on the server, and so if they are deleted anywhere, all synchronized devices will at some point also see the deleted messages vanishing. (Unless you made a local copy in the Local Folders account.)
    I use a gmail account pretty much as you have described; I copy or move messages to that account so they are visible in my phone, my tablet, my own laptop and my works computer. It's free, and it's "in the cloud"; the only reservation I have is its privacy. There are other providers (e.g. 1&1/gmx) who don't seem to have the data collection fetish that google thrives on.
    It's fairly simple to create filters in Thunderbird to automatically copy messages to your "cloud account"; even better is to set up forwarding rules on the other accounts' servers, so your messages are automatically sent on and waiting for you when you next login, already in the cloud account.

  • Can't pair bluetooth for using Keynote remote

    I can't get my iPhone 5s to use the Keynote remote app with bluetooth.  The bluetooth hotspot works fine so I know my MBP can connect to the phone via bluetooth, and the Keynote app works great with wifi, but can't get it to work with bluetooth.  I assume that I cannot use the hotspot and connect to the Keynote remote app via bluetooth at the same time.  (When I have hotspot activated, the Keynote remote app doesn't work at all--screen appears frozen.)  So I turned off hotspot and then try to pair via bluetooth.  When I browse devices with bluetooth, the phone appears and I click on pair.  I then get a message on my phone to confirm.  I click OK and then it shows on my MBP that it is paired for about 1 second and then it disconnects and I get a message on my phone that the device is not supported.  I am using the latest of everything, iOS 7, Mavericks, iPhone 5s and a one year-old MBP.  So how can this not be supported?

    Here is the link you are looking for:
    http://support.apple.com/kb/HT3325?viewlocale=en_US
    You might also try turning off wifi on both devices when using Bluetooth.  They may be stepping on each other.
    There is also a limited distance over which Bluetooth will work.  I work my setup of equipment so that I can keep my iPad and iTouch within about 10 feet of each other.
    Hope this helps.
    Jefferey

  • How can I Updating firefox for linux in package manager ?

    Thank for reading my question.
    I am a beginner off Linux. The computer sends almost all the time messages you have to update, it's to old. I have Linux from a package manager, but it is looks like everything is updated, must I change it? Firefox is sloooooow.
    And gmail ask me to update. Updated manually Firefox have I done but never starts.
    Is it a computer virus or something else?
    What should I do?

    It is possible that your Linux distribution is no longer updating Firefox.
    In that case you can consider the download and install the full version of the current Firefox release.
    You can find the full version of the current Firefox 33.0.1 release in all languages and for all Operating Systems here:
    *https://www.mozilla.org/en-US/firefox/all/
    Make sure that you meet the System Requirements (GTK+ and GLib) for the current Firefox version.
    *https://www.mozilla.org/en-US/firefox/33.0.2/system-requirements/
    *http://kb.mozillazine.org/Installing_Firefox#Linux

  • Three Things to Look for in a Remote Management Solution (ZE

    Why do companies invest in remote workspaces? The basic idea is that by allowing employees to work from any device or location at any time, they will...

    It’s easy to think of the needs for education enterprise environments as being pretty minimal. Other than email and some collaboration tools, what...

  • Can't find drivers for my Satellite C50T-A382

    Hi .
    I have Satellite C50T-A382 laptop*
    Part no. PSCFNV-003002AR*
    OS. Windows 8.1
    My problem that i tried to reset laptop factory settings by hdd recovery system
    But after 7% it freeze and crush and showing blue screen saying there is problem with resetting
    I tried so much but still crushing and failed to reset
    Then i canceled reset and when i go back to my windows it can't start up .. it start hdd recovery instead
    I tried start up repair but still doesn't start up
    so i bought a new windows 8.1 pro and install it on my laptop
    the problem now that there is some drivers did not found like wireless adapter, Bluetooth, and so much else
    so i tried to download driver from your website , but after i inter my laptop model and everything it's show me that there is no drivers to download ..
    where can i found drivers for my laptop .. i can't connect to wifi and can't use Bluetooth because my new windows 8.1 pro that i bought did not install drivers for it ..
    so help me please ...
    Ps : I'm from middle east .. and my laptop has a sticker says "Approved for sale in MEA" and I use toshibamea.com for searching for drivers and didn't find any*
    I'm wetting for respond .. and thank you

    Go to:
    http://www.toshiba.eu/innovation/download_drivers_bios.jsp
    Here choose:
    +Notebook+
    +Satellite+
    +Satellite C+
    +Satellite C50T-A+
    +All+
    +Windows 8.1 64bit+
    Now you will get all drivers for this notebook series.
    Note: On the page you will find different WLan driver since different WLan modules have been used in the different models.
    Just check each of the drivers
    To get the Bluetooth working, you need to install additional Bluetooth Filter Driver Package. This depends on the Wlan module your notebook support.
    The proper Bluetooth Filter Driver Package I found in Satellite C50T-B series

  • Can't find drivers for display

    Hi, I can't found drivers for display Toshiba TruBrite.
    That's why I had frequnce on display only 60 Hz.
    Could you help me with this trouble?

    LCD technology is different and cannot be compared to old monitors. LCD displays work on 60 Hz refresh rate and this value is fixed. It cannot be changed.
    Doe to this fact you cannot change it.
    I don't understand what you mean with display definition but if the right (Toshiba offered) driver is preinstalled everything will be OK. There is nothing that must be defined. Absolutely nothing.
    TrueBrite or not there is nothing to be defined.
    So if the display driver is preinstalled and if you use right display resolution everything is OK.
    Be happy and have fun with your toy. ;)

  • Favicon.ico for Remote Manager ?

    Hi,
    any idea where to place the favicon for The NRM (Remote manager ?)
    No clue where the document root for nrm is ...
    I don't like these tons of error messages:
    Jul 27 14:36:57 XXXX httpstkd[3526]: DATE=20090727123657 GMT HOST=XXXXX PROG=HTTPSTK LVL=Usage SRC.IP="XX.XX.XXX.XXX" SRC.PORT=XXXX PROT="HTTP" MSG="error code 302" STAT="GET" CMD="/favicon.ico" DUR=0
    Thanks and Regards
    eschaefer

    On 27/07/2009 13:46, eschaefer wrote:
    > any idea where to place the favicon for The NRM (Remote manager ?)
    > No clue where the document root for nrm is ...
    > I don't like these tons of error messages:
    >
    > Jul 27 14:36:57 XXXX httpstkd[3526]: DATE=20090727123657 GMT HOST=XXXXX
    > PROG=HTTPSTK LVL=Usage SRC.IP="XX.XX.XXX.XXX" SRC.PORT=XXXX PROT="HTTP"
    > MSG="error code 302" STAT="GET" CMD="/favicon.ico" DUR=0
    I assume that currently the favicon being displayed is a green sphere in
    a circle ... ?
    If so you do not actually want to replace it because it's indicating the
    status of the server - if you try and display
    https://<server>:8009/favicon.ico you are redirected to
    https://<server>:8009/sys/login/status_<condition>.gif where <condition>
    should be normal but could be critical, warning, etc. These
    status_<condition>.gif files correspond to those in /opt/novell/nrm (and
    no you can't add a favicon.ico to that directory for it to be used
    instead!). It's not Apache handling NRM so you can't configure it in
    the same way.
    HTH.
    Simon
    Novell Knowledge Partner (NKP)
    Do you work with Novell technologies at a university, college or school?
    If so, your campus could benefit from joining the Novell Technology
    Transfer Partners (TTP) group. See www.novell.com/ttp for more details.

  • When you have location service on for camera when you post to facebook, instagram etc. can people find out were I took it?

    When you have location service on for camera when you post to facebook, instagram etc. can people find out were I took it?

    Hey jerzeyzfynest,
    Unfortuantely, no -- Geek Squad Protection plans require that repairs be sought before a product is considered for replacement. This means your current laptop would only qualify for an exchange if one or more of the following conditions are met:
    A factory-authorized technician has determined that repairs cannot be completed
    A factory-authorized technician has determined that replacement parts cannot be obtained
    The unit has accrued two previous qualifying repairs a factory-authorized technician has identified a third qualifying hardware failure
    A detailed overview of this policy may be found in your plan documentation, as well as in the sample brochure available on the following site:
    http://bbyurl.us/TandC
    If your current laptop hasn't been performing up to par, then I'd encourage you to speak with a technician at your local store when you have the chance to do so. Diagnostic services are included in your service plan coverage, so we'd be glad to help find out what's going on.
    Aaron|Social Media Specialist | Best Buy® Corporate
     Private Message

  • System Image Restore Fails "No disk that can be used for recovering the system disk can be found"

    Greetings    
                                        - Our critical server image backup Fails on one
    server -
    Two 2008 R2 servers. Both do a nightly "Windows Server Backup" of Bare Metal Recovery, System State, C:, System Reserved partition, to another storage hard drive on the same machine as the source. Active Directory is on the C: The much larger D: data
    partition on each source hard drive is not included.
    Test recovery by disconnecting 500G System drive, booting from 2008R2 Install DVD, recovering to a new 500G SATA hard drive.
    Server A good.
    Server B fails. It finds the backed-up image, & then we can select the date we want. As soon as the image restore is beginning and the timeline appears, it bombs with "The system image restore failed. No disk that can be used for recovering the system
    disk can be found." There is a wordy Details message but none of it seems relevant (we are not using USB etc).
    At some point after this, in one (or two?) of the scenarios below, (I forget exactly where) we also got :
    "The system image restore failed. (0x80042403)"
    The destination drive is Not "Excluded".
    Used   diskpart clean   to remove volumes from destination drive. Recovery still errored.
    Tried a second restore-to drive, same make/model Seagate ST3500418AS, fails.
    Tried the earliest dated B image rather than the most recent, fail.
    The Server B backups show as "Success" each night.
    Copied image from B to the same storage drive on A where the A backup image is kept, and used the A hardware to attempt restore. Now only the latest backup date is available (as would occur normally if we had originally saved the backup to a network location).
    Restore still fails.         It looks like its to do with the image rather than with the hardware.
    Tried unticking "automatically check and update disk error info", still fail.
    Server A  SRP 100MB  C: 50.6GB on Seagate ST3500418AS 465.76GB  Microsoft driver 6.1.7600.16385   write cache off
    Server B  SRP 100MB  C: 102GB  on Seagate ST3500418AS 465.76GB  Microsoft driver 6.1.7600.16385   write cache off
    Restore-to hard drive is also Seagate ST3500418AS.
    http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/e855ee43-186d-4200-a032-23d214d3d524      Some people report success after diskpart clean, but not us.
    http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/31595afd-396f-4084-b5fc-f80b6f40dbeb
    "If your destination disk has a lower capacity than the source disk, you need to go into the disk manager and shrink each partition on the source disk before restoring."  Doesnt apply here.
    http://benchmarkreviews.com/index.php?option=com_content&task=view&id=439&Itemid=38&limit=1&limitstart=4
    for 0x80042403 says "The solution is really quite simple: the destination drive is of a lower capacity than the image's source drive." I cant see that here.
    Thank you so much.

    Hello,
    1. While recovering the OS to the new Hard disk, please don't keep the original boot disk attached to the System. There is a Disk signature for each hard disk. The signature will collide if the original boot disk signature is assigned to the new disk.
    You may attach the older disk after recovering the OS. If you want to recover data to the older disk then they should be attached as they were during backup.
    2. Make sure that the new boot disk is attached as the First Boot disk in hardware (IDE/SATA port 0/master) and is the first disk in boot order priority.
    3. In Windows Recovery Env (WinRE) check the Boot disk using: Cmd prompt -> Diskpart.exe -> Select Disk = System. This will show the disk where OS restore will be attempted. If the disk is different than the intended 2 TB disk then swap the disks in
    correct order in the hardware.
    4. Please make sure that the OS is always recovered to the System disk. (Due to an issue: BMR might recover the OS to some other disk if System disk is small in size. Here the OS won't boot. If you belive this is the case, then you should attach the
    bigger sized disk as System disk and/or exclude other disks from recovery). Disk exclusion is provided in System Image Restore/Complete PC Restore UI/cmdline. 
    5. Make sure that Number and Size of disks during restore match the backup config. Apart from boot volumes, some other volumes are also considered critical if there are services/roles installed on them. These disks will be marked critical for recovery and
    should be present with minimum size requirement.
    6. Some other requirements are discussed in following newsgroup threads:
    http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/871a0216-fbaf-4a0c-83aa-1e02ae90dbe4
    http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/9a082b90-bd7c-46f8-9eb3-9581f9d5efdd
    http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/11d8c552-a841-49ac-ab2e-445e6f95e704
    Regards,
    Vikas Ranjan [MSFT]
    ------- This information is provided as-is without any warranties, implicit or explicit.-------

  • How can I use the color adjustments interface that shows up for camera RAW on jpeg files?

    How can I use the color adjustments interface that shows up for camera raw on other files types? The HLS controls had the secondary color adjustments (6 colors instead of the 3). Plus, it had same vibrancy and a better Curves interface. Yesterday was the first time I imported raw into Photoshop CS5 and I got that really cool interface. What is that? Can I use that on other file formats?

    Actually I am using the Tradional Chinese Version, when I try to edit the jpg file with camera raw, the system shows that there is no camera raw plug-in. The cmaera raw never work.

  • Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc. This is a new problem and was not the case before.

    Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc.
    This is a new problem and was not the case before.

    Works perfectly fine for me with the latest Reader version (11.0.09).
    You write that it worked "before"; before what?  An update?  Update from what version to what version?

Maybe you are looking for