I can't get a proper connection to my Epson R1800 printer. I need to be able to choose Paper type and size. It keeps saying that the downloads are fine, but the System Library Extensions SMC1255TX.kext aren't working?
Dear sweet Apples, that know all the answers...
I can't get a proper connection to my Epson R1800 printer. I get the basics , but I need to be able to choose paper sizes and paper Types.
It keeps saying that the downloads went fine, but then it says that the System/Library/Extensions cannot be used because SMC1255TX.kext
isn't working. My downloads are useless as a result
Did you restart the printer?
Similar Messages
-
I needed memory to upgrade so I exported all of my iphoto to an external hard drive. I then deleted and emptied the trash. The photos are fine but the videos are blank. Is there any way to recover the videos? Any software recovery programs apple supported?
no official way but if you open the Apple TV and put the hd in the external case it should mount and give you access to the data on it
-
I Have a new iPhone 6 and my contacts, calendar and notes won't sync between my ipad air, imac, macbook air, iCloud. The three are fine and they sync OK...but the data won't reach my new iPhone 6. OS Yosemite, iOS 8.1.1
Any ideas?
Thanks!Hi vichochile,
If you are having an issue with syncing your new iPhone with the information that is in iCloiud (and on your other devices) we should make sure that iCloud is set up correctly on the iPhone. See this page for directions -
Apple - iCloud - Learn how to set up iCloud on all your devices.
Thanks for using Apple Support Communities.
Best,
Brett L -
While installing Xcode 3.2 and iPhone SDK 3.1 for Mac OS X 10.6 Snow Leopard, the following error message is shown "/System/Library/Extensions/USBAtTable.kext installation error". Could anyone help.
Regards,
MKSTry the developer forums under OS X Technologies. Alternatively, download and install Xcode Tools 3.2.1, followed by the latest iPhone SDK.
-
What's up with this? The drive in question is an 80gb IDE external drive, USB connected.
System extension cannot be used
The system extension “/System/Library/Extensions/IOStorageFamily.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward. -
The system extension “/System/Library/Extensions/IOSCSIArchitectureModelFamily.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.
i keep getting this when i connect my ipod nano 6th gen to my Mac Mini. I am running the latest OS and the Latest Itunes. Not sure what the problem is.For everyone with this problem:
Repair Disk Permissions.
My USB drive is recognised again, few! -
I have this error message:
System extension cannot be used
The system extension “/System/Library/Extensions/AppleACPIPlatform.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.
Please help. Is there a update or how do I reinstall?
Thanks,
JohnI submitted the above question, later finding that it has been answered by Buller already. No one need reply as Buller's answer seems to solve the problem for others, and I'll try that.
Jim -
What does this mean? What should I do?
The system extension “//System/Library/Extensions/AppleUSBEthernetHost.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.You don't even have to type more than 8 letters:
-
I get this message often when updating things. I have told Small Dog Computer where I buy my stuff, and they didn't have an answer. Thanks in advance.
What does this mean? ... System extension cannot be used ... The system extension "/System/Library/Extensions/IOFireWireWDHID.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update.Interesting ... thank you! Actually I had that external drive, Western Digital, a while back on my second last? or third last? laptop ... the external drive died with a slew of pictures I had carefully uploaded to it :-(
I won't worry about it anymore :-)
sorry you got only 5 points, can't figure how to give you 10 points. -
Hi,
I try to install my new wacom tablet but there is a an error on the secret like:
The system extension “/System/Library/Extensions/CDSDAudioCaptureSupport.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.
I contacted to wacom but they say I should contact with apple for this. Is there anybody to came across with this situation. Please help!!!
I don't know what to do:((
basakI think you may have been advised incorrectly by Wacom...
Irregardless, we need to know your OS X version? and verify your Mac model?
you may find this thread helpful...
error message: /System/Library/Extensions/CDSDAudioCaptureSupport.kext
there may be others, but let's start by getting all sys/OS info first.
CCC -
Trying to reinstall MX882 Canon printer after upgrading to OSX Mavericks. Printer will not print and I get a message "The system extension "/System/Library/
Extensions/AppleUSBEthernetHost.kext" was installed improperly and cannot be used. Try reinstalling it, or contact vendor for update."
What do I do and where is this extension?beverly216 wrote:
What do I do and where is this extension?
I would recommend you download and install the OS X 10.9.5 Combo Update.
That file is part of the operating system and it is located where the error shows, i.e. HD > System > Library > Extensions. It would seem that when you updated, this file and maybe others have not updated correctly. So running the Combo Update may help resolve this. -
I get the error message after updating itunes:
System extension cannot be used
The system extension “/System/Library/Extensions/AppleUSBthernetHost.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.
What or how do I fix this?"I get the error message after updating itunes:
System extension cannot be used
The system extension “/System/Library/Extensions/AppleUSBthernetHost.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.
What or how do I fix this?"
I have a MacBook Pro running Mas OS X Version 10.7.5
Is this a problem I need to fix? Is there a fix or update? -
What does this message mean ? It has popped up a couple of times and I want to fix whatever it is. Thanks for your help.
Seems pretty clear to me. Here's what you can try:
Open Terminal in your Utilities folder. Paste the following at the prompt:
sudo chown -R root:wheel /System/Library/Extensions/AppleUSBEthernetHost.kext
Press RETURN. Enter admin password when prompted. It will not be echoed so type carefully. Press RETURN again.
Restart the computer. -
Received following message during installation of an iTunes update today (9/16/14): System extension cannot be used. The system extension “//System/Library/Extensions/AppleUSBEthernetHost.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update. What is to be done about it?
Thanks for the reply. I'm not experienced in the inner workings of the iMac system and its programs, so please follow my train of thought as I try to find and understand your reply.
You wrote that I should check out "Please see - AppleUSBEthernetHost.kext error on installing iTunes update" and I did so.
There I found your reply of 9/1014 7:06 PM to j'ski stating: "There is a larger thread here which you may want to follow - system extension cannot be used AppleUSBEthernetHost.kext ."
And an earlier Post by Greg Earle of 9/10/14 5:57 PM stating: " You would have been better off doing open /System/Library/Extensions and then finding the AppleUSBEthernetHost.kext kernel extension icon in the Finder window that came up and moving it to the Trash."
And a subsequent Post on 9/15/14 at 2:59 PM by Rob Maurer stating: "This method worked perfectly for me. I am on a Mac Pro running Mountain Lion. Dragged the kext file to trash (I use EasyFind. Found the file, Revealed in Finder, dragged to Trash, entered admin password when requested). Downloaded iTunes 11.4 from the website. Installed from that download. Checked for that kext file in EasyFind again and found it had a creation date of 7/29/14 (the trashed one had a creation date from 2009). No more error messages. ITunes opens fine. Everything good. Will not update on my MacBook Pro until they fix this issue.
All of which leave me wondering - what is your answer/recommendation? Do I drag the kext file to trash, download iTunes 11.4 from the website and install it from that download, check for that kext file again to see if it has a later date than the initial one? And, if so, seed if iTunes opens okay or not? And if so, do not update iTunes again until Apple fixes whatever is wrong? -
Hopefully, i can get some help in resloving the issue below. i updated my harddrive at Techserve and have been getting this message evertime i try to install a new software. Help...
The system extension “/System/Library/Extensions/CDSDAudioCaptureSupport.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.That is a third-party extension, so I would reinstall that software unless you wish to try repairing the permissions on the extension yourself using the Terminal.
Maybe you are looking for
-
File to proxy dont get the file name from UDF
Hi Pi gurus, when i try to get the name of the file from the mapping by using the code above in a UDF i simply get a null in place of the real name of the file. here the code that i used: ============================= String SourceFileName = ""; Stri
-
The follow Exception is threw if I put a Tree component in any page in one of my project : java.net.MalformedURLException: no protocol: /layout/layout.dtd stack trace: java.net.MalformedURLException: no protocol: /layout/layout.dtd at com.sun.ra
-
ICloud erased all my calendar entries
Hello community. I should much appreciate help with the following. 1. I have (had) a lot of calendar entries in my iPhone 4S. 2. I thought I should start to share my calendar with my Retina. 3. I went to iPhone settings, iCloud, turned On the Calenda
-
Help please. I am trying to create sequence on the report. I wrote following PLSQL on the field emp_no in order to show sequence number (1,2,3...)on the employee_no column. It did not work. CREATE SEQUENCE Emp_sequence INCREMENT BY 1 START WITH 1 NOM
-
Adding keywords to ref'd images while ext HDD disconnected?
I have looked for an answer to this issue in the documentation as well as searching this forum (and others), but cannot find a succinct answer. Here's the question: I have original image files on an external 500GB drive hooked to my MacBook (2GB RAM,