I can't get After Effects to install

I have tried to download the trial of After Effects CS6 at least ten or more times, both by the adobe download assistant and through the adobe cloud program. And none of them work, I keep getting errors as soon as I start to download the actual After Effects 2.6 gb trial. this is my error.
Exit Code: 34 -------------------------------------- Summary -------------------------------------- - 1 fatal error(s), 0 error(s), 0 warning(s) FATAL: Payload '{0A1E2FE2-B2AD-42F4-9C74-641853FB093A} Photoshop Camera Raw 7 6.2.10.0' information not found in Media_db. -------------------------------------------------------------------------------------
System Requirements
Can I PLEASE get some help with this.. I've tried multiple times to download this and none of them have worked. Help?

Adobe Forums: FAQ: How do I uninstall the Photoshop CS6 beta?
Same issue in different guise...
Mylenium

Similar Messages

Can i get After Effects in 30days trial plan?

can i get After Effects in 30days trial plan?

Yes, provided you have a 64 bit computer and a 64 bit operating system.
http://www.adobe.com/products/aftereffects/tech-specs.html

Cant get after effects to install

Hi a bought Adobe Premiere Pro CS5.5 for the reason to get after effects but after i completed the installation the only application which did not download and install was after effects does anyone know how i can fix this as i only bought if for my work and it is a waste of money if i cant use it thanks

Model Name:          iMac
Model Identifier:          iMac12,1
Processor Name:          Intel Core i5
Processor Speed:          2.5 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:          6 MB
Memory:          4 GB
Boot ROM Version:          IM121.0047.B0A
AMD Radeon HD 6750M:
Chipset Model:          AMD Radeon HD 6750M
Type:          GPU
Bus:          PCIe
PCIe Lane Width:          x16
VRAM (Total):          512 MB
Vendor:          ATI (0x1002)
Device ID:          0x6741
Revision ID:          0x0000
ROM Revision:          113-C2950H-170
EFI Driver Version:          01.00.544
Displays:
iMac:
Resolution:          1920 x 1080
Pixel Depth:          32-Bit Color (ARGB8888)
Main Display:          Yes
Mirror:          Off
Online:          Yes
Built-In:          Yes
Connection Type:          DisplayPort

Using Qt in a AEGP plugin. QWidget can't get after effects as parent window

Hey guys,
I'm trying to use the qt framework to create a user interface for my AEGP plugin. And I'm running into some problems.
First, I tried to pass the main HWND into a QWidget, but the QWidget can't seem to recognize it as a parent window. My code looks like this,
A_Err err = A_Err_NONE;
AEGP_SuiteHandler suites(basicSuiteP);
HWND handle;
ERR(suites.UtilitySuite5()->AEGP_GetMainHWND(&handle));
qt tt(handle);
tt.show();
qt is a child class inherit from QDialog with a custom constructor
qt::qt(HWND hWand) :QDialog()
create((WId)hWand);
setModal(true);
The qt window did show up, but it can't block user's interaction with after effects' main window. When a QDialog pops up, it will block user's interaction with its parent window until it's closed. But it doesn't seem to work with after effects.
And, I'm wondering, is it possible to add a QWidget to after effects' native panel? For now, my qt window is floating as a separate window. can I just add my qt widgets into a after effects panel so it can dock into after effects' main window?

FCP doesn't work with H.264 files. It might bring it in, or it might not. It might seem like it's working, but then sync drifts. It might look like it's fine, but when you export different sections jump to other clips. It's unpredictable.
FCP 7 and H.264 do not mix.
If you are exporting files out of AE on a PC, then look at exporting them as DNxHD...the Avid codec. or Cineform. Then the FCP user will need to install the Avid codec or Cineform in order to see the file, but then they should convert it again to ProRes 422...as working with non-FCP codecs in FCP can be problematic. I recommend those formats over the others, like ANIMATION or UNCOMPRESSED...because of the file size issues.
If you are using AE on a Mac, the same computer as FCP...then export as ProRes right away. Done and done.

Can't get After Effects CC to install.

Adobe Application Manager stalls once After Effects is downloaded and begins to install. Just hangs at "Installing..." and an empty progress bar. I just downloaded/installed Premiere Pro without problems. Please help. Thanks.
Mac OSX 10.9 Mavericks

Hi art_damage,
Please try restarting the Mac and try installing After Effects CC again. It should work.
Regards,
Abhijit

Can't get After Effects CC to startup

After a fresh install of AE CC, I get the following error:
After Effects warning: Could not rename the file '/Users/cstrimbu/Library/Preferences/Adobe/After Effects/12.2/Workspaces.537.1407352435556001.xml' to 'Workspaces.xml’.
The next dialog box says the following:
After Effects can’t continue: unexpected failure during application startup
I'm running OS X 10.9.1., 2.6 i7, 16GB RAM.
Anyone else having this issue?

See this:
http://forums.adobe.com/message/5807559#5807559

Adobe Creative Cloud because I do not get After Effects among others but I try to install software from the page but I give After Effects download shareware and says downloading but nothing comes give him retrying but nothing even leave the application of

if you can help me please alguin
Adobe Creative Cloud because I do not get After Effects among others but I try to install software from the page but I give After Effects download shareware and says downloading but nothing comes give him retrying but nothing even leave the application of Adobe Creative but nothing help

Without proper system info and otehr technical details nobody can tell you anything.
Mylenium

I can't get text effects to preview in cs6 After Effects. It was working a week ago.

I can't get text effects to preview in After Effects CS6 browser. It was working a week ago.

I uninstalled and reinstalled a current Quicktime. Couldn't find hardware accelerated previews in Bridge setting. Is it under "preferences"? Couldn't find it in preferences. Still not previewing.

Do I need to uninstall my trial version of CS6 and install using disk to get After Effects?

Do I need to uninstall my trial version of CS6 and install using disk to get After Effects?

No, the trial version is identical to the purchased version in every aspect other than the time limitation. Besides, the boxed version will probably be LR 4.0 and then need to be updated. To cancel the time limit simply supply the registration key from the back of the box in Help/Registration.

I can't find after effects on Creative Cloud to install ??

Hello,
I can't find after effects on Creative Cloud to install ??
no after effects , no premiere ,, can u please advice ..

JayneMarie I think your computer now has a 32 bit OS and since the CS5 version, Premiere Pro is not meant to work in a 32 bit environment.
Please check your OS details and make sure you have a 64-bit OS installed. If it isn't a 64-bit OS, you will need to reinstall the OS.
Thanks,
Rameez

I have a t61 thinkpad and after update to w7 ultimate I can't get aero effects

I have tried everything and I can't get aero effects to work. I updated all of the graphics drivers, and anything else the internet had to offer and I got nothing. There is a possibility though. I have a windows old folder from all the files I had from xp. Would that affect it? If not other suggestions?

Hello,
What is the model type of your ThinkPad T61? That should be on a label on the bottom of the unit and look something like 1234-ABC.
Try running the ThinkVantage System Update software followed by the Microsoft Update to make sure the system is up-to-date with respect to all ThinkPad-specific software as well as any Windows 7 components, including optional and low-priority updates. After all those are complete, are you then able to switch Aero effects on for graphics?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

How can I use After Effects filters on a whole sequence without getting stuck in After Effects?

It appears that, with the options that are visible to the user, Dynamic Link only goes one-way and can't make round trips from Premiere Pro to After Effects and back again. If I send a sequence to After Effects, that part works fine and I can do what I want and save the comp. However, even though the comp appears as an asset in Premiere Pro, I am not allowed to do anything with it. If I try to drag it to a new sequence, it just says no. If I click "Create Sequence from Clip" it creates an empty sequence.
So how can I use After Effects on whole sequences/tracks instead of just on a clip-by-clip-by-clip-by-clip-by-clip basis? is this possible? For instance, if I have a whole sequence where I've neutralized the white balance, I might want to apply a warming filter to the whole thing as a unit. That would be really painful with even a few clips to keep doing that again and again, and if you want to modify it slightly you have to do it over and over. If there is a way to do that through Dynamic Link through some hidden option, what happens with the audio? Would I have to cut it out of the lower sequence and paste it into the higher sequence with the After Effects comp as a video track?

I'm not an Adoby guy, hence you may ignore my reply, but Adobe Dynamic Link is obviously not just one way ticket and in most cases works just fine.
You have already been explained by J-MS and tclark513 how to properly use it and which pitfalls may occur.
So as to apply an effect onto a whole sequence or a group of clips you need to either nest them in PrPro or pre-compose them in AE. Then just apply an effect (or several ones) onto that composition.
So, if you nest clips in PrPro, select your nested sequence in the timeline, right-click and choose 'Replace with After Effects Composition'. Done! Your dynamically linked AE composition is in the right place in your timeline and in your Project panel as well. If you can not treat it as an ordinary footage, there are obviously some mistakes in your workflow.
If you didn't nest your sequence or a group of clips in PrPro before replacing them with AE composition, you may easily do it within AE. Just select all the layers in AE composition and choose Layer -> Pre-compose... (Ctrl/Cmd+Shift+C) Done! Switch back to your Master comp and apply your desired effect(s)
You may loose some effects or/and transitions while travelling from PrPro to AE via Adobe Dynamic Link, whereas you don't while travelling back
(If you start building your AE composition from scratch right in AE and then need to import it into PrPro, DO NOT export one as PrPro project out of AE, but rather choose Adobe Dynamic Link -> Import After Effects Composition... within PrPro)
P.S. And yes, submit a feature-request so that Adobe will convert 'Transparent Video' into fully functional 'Adjustment Layer'.

FINAL CUT STUDIO PRO - CAN'T GET "SMOOTHCAM" EFFECT

PROBLEM:
FINAL CUT STUDIO PRO - CAN’T GET “SMOOTHCAM” EFFECT
I use a Macbook Pro 17”
Software: Leopard 10.5. External LaCie Hard Drive 1TB
I upgraded my Computer Software to Leopard and reinstalled Final Cut Pro and Motion on my Laptop. It worked fine with SmoothCam, but as I had lost too much space on my Laptop Harddrive, I decided to reinstall the full program, choosing custom location the external LaCie drive.
Since than Final Cut Pro can’t find SmoothCam and it asks to reinstall SmoothCam.
➢ ./library/Plug-Ins/FX /Plug< Not Existing
➢ ./library-Application Support/ProApps/Internal Plug-Ins/FX Plug<
This file is empty.
My project I work on at the moment is a film, where I had done a lot of SmoothCams, but since reinstalling it will not find the effect anymore, it asks to reinstall SmoothCam.
In the mean time I tried several times to start from scratch and reinstall the whole Program, but now I’m not even able to register anymore, it will not accept the correct Registration No.
I would appreciate anybodies help very much.
Zuckerhut

I had a similar problem when I upgraded my MacBook Pro to leopard as well. This is what I did (after several trial and errors)...
1.) Wipe the computer again and reinstall leopard. I suggest doing a custom install and just leave out things you do not need as they just take up valuable space.
2.) Reinstall FCS but DO NOT let it install the additional content as we will get to that part later. Just install the core programs themselves and uncheck the boxes to install the additional content.
3.) After FCS is installed re-run the installer and install the content but change the location to your external drive. At this point I created a folder on my external called "Final Cut Studio" and Created separate folders for each program and its content.
4.) After you have reinstalled the content on to your external drive, go into each program and point them to where the extra content is kept. <--- This step and step 3 arent really needed, but they make things easy for when you have to wipe your computer. This has saved me LOTS of time on reinstalling FCP because now all you have to do is install the core programs from now on.
You once you start FCP all your effects should be there. The main thing here is to do a complete wipe of the system and rebuild. Not just an uninstall / re-install. As far as your registration problem your going to have to call apple. I had a problem with an old serial number where it would not take it anymore after updating the software to 6.0.2 from 6.0. They can give you a new number to use and it does not take too long.
Hope that helps you out some.

After effects cc install stuck at 90%

I can't seem to get my after effects cc install past 90%. after I have waited for some time, i then press cancel and rather than going back to an 'install' button, it goes to a 'update' button. i click that and get error - U43M1D204

Hello,
I had this exact same problem, and I didn't know what to do. However, I went into the menu to Force Quit Applications (Apple Menu, Force Quit...), and I noticed that Skype wasn't responding. I wondered why, and I force quitted it. Straight away, my update went to 97%, and after a short while, installed. I'm not sure if this is the case with your computer, or if you even have Skype, but this solution works for me.
Kind Regards,
Goombado

What is an 'SPL-2.dmg' file and how can I get it (the driver) installed?

subject line is question

*My question to Samsung:*
"SCX-4200 driver for Mac OSX.5.5
After downloading the driver from
http://www.samsung.com/us/support/download/supportDownDetail.do?group=&type=&sub type=&modelnm=SCX-4200&language=&cate_type=all&mType=DR&dType=D&vType=L&cttID=2047002&prd_i a_cd=06010300&dispnm=SCX-4200,
the following error message is displayed: 'The following disc images failed to mount - image: SPL2.dmg; reason: not recognised.'
Please advise."
*The reply from Samsung:*
Thank you for contacting us regarding your SCX-4200 and the recent issue you have experienced.
It is difficult to say why this error may have occurred, it may be that the file has been corrupted during transfer. You should try deleting this file again and re-downloading it or possibly even try downloading the file from an alternate location such as below -
http://org.downloadcenter.samsung.com/downloadfile/ContentsFile.aspx?CDSite=uk&C ttFileID=2047002&CDCttType=DR&ModelType=N&ModelName=SCX-4200&VPath=DR/200810/200 81028145509765/SPL2.dmg
Should you wish to discuss this issue further, please feel free to call our IT Helpdesk on 0845 726 7864 quoting your reference number."
*Having tried all that, I did phone them, only to be fobbed off, +'Try re-installing from the CD you got with your printer. If that doesn't work it must be their ([Apple's]) problem.'+*
My MacBook is trying to mount it, according to right-click 'Get Info', using DiscImageMounter, which only returns the error message (above), 'The following disc images failed to mount - image: SPL2.dmg; reason: not recognised.' Disc Utility doesn't tell me much more. What should I do with it?
My printer (Samsung SCX-4200) clicks and warms up when it's sent a command to print, but that's the end of it - it won't do anything else, which is why I went looking for the driver in the first place. Note the Samsung Download Centre site at _http://www.samsung.com/uk/support/download/supportDownDetail.do?group=printsolut ions&type=printsolutions&subtype=monomultifunctionproducts&modelnm=SCX-4200&disp_nm=SCX-4200&language=&cate_type=all&mType=DR&dType=D&vType=L&ct tID=2047002&prd_ia_cd=06010300 says this driver was updated/uploaded 28/10/2008, but I can't get the **** thing to install. Any idea what I'm doing wrong?
Probably also worth noting: the printer works fine with Windows on my MacBook's BootCamp partition.

I can't get After Effects to install

Similar Messages

Maybe you are looking for