I can't get any audio playback from FCP X (or Premier Pro for that matter)…

When I playback a clip with audio it shows good level in the meters but I get no sound from any device (internal speakers, USB headphones, 3.5mm Headphones etc etc). If I render out a clip the audio is there and plays back in QuickTIme.app.
There are a few suspicious things like not being able to adjust the Master level slider in Sound Prefs, it's locked to Max position. I first became aware of this problem when I left After Effect and went to Premiere Pro to do an video comp that AE was choking on. PPro handled it well but no sound. Decided to try doing it in FCP X even though the interface is hard for me to 'get' striaght away I found stuff online about travel mattes but still no sound. Very frustrating I have a deadline — don't we all ;-)
Any ideas?
I uninstalled SoundFlower just in case. No difference. In the Audio MIDI Setup Utility.app, PremierPro and After Effexts come up as discrete devices:
About to try zap the PRAM can't think what else to do although I found an article that says trash the audio prefs one by one.

Make an appointment to your nearest Apple Genius bar.

Similar Messages

  • I can not get an audio stream from any TV channel on ipad

    I can not get an audio stream from any TV channel on my ipad ,please help me fix this problem

    Muneer-
    What App are you using to get the audio stream?  Safari should work unless Flash is involved.
    I have used the free NPR App to listen to radio stations, but I don't know if it works with TV stations.
    Fred

  • I'm staying at my house in Peru, South America. From my PC laptop I can see my neighbor's wifi service network, but I also have my mini iPad and I can not figure out why I can't get any wifi connection from my area. Is there a setting I need to do?

    I'm staying at my house in Peru, South America. From my PC laptop I can see my neighbor's wifi service network, but I also have my mini iPad and I can not figure out why I can't get any wifi connection from my area. Is there a setting I need to do?

    Yes, I did try to go on my settings>wifi and was waiting for any wifi signals to pick up, but nothing shows up. But on my PC I get a whole list of networks to choose from. Regarding my neighbor, I already have her password that is why I was able to get it on my PC, the problem is that the mini Ipad is not picking any signal neither can it locate me when I go to maps.

  • Pictures will load to the photostream just fine, i can see them on both my ipad and iphone, but they stoped uploading to my PC 10 days ago? I can not get any new pictures from my iphone to my PC, what can i do to fix this?

    Pictures will load to the photostream just fine, i can see them on both my ipad and iphone, but they stoped uploading to my PC 10 days ago? I can not get any new pictures from my iphone to my PC, what can i do to fix this?

    Sign out of the iCloud control panel and then back in.

  • Is the iPhone alarm supposed to sync with iwatch?  I can't get any alarm notifications from my iPhone to my watch. Do I have to just set up whole new alarms specifically in my watch?

    Is the iPhone alarm supposed to sync with iwatch?  I can't get any alarm notifications from my iPhone to my watch. Do I have to just set up whole new alarms specifically in my watch?

    Yes, they should sync. Check the Watch app on the iPhone and look at Calendar - make sure it's set to Mirror my phone
    If it still doesn't work, reset the Watch, restart the phone and re-pair the Watch - fixes a few glitches

  • I can't get any audio on my view  sonic with apple tv?

    I can't get any audio on view sonic tv model N2750W
    when apple tv is plugged in. any solutions?

    can anyone offer me a set up guide w/ apple tv for this? specific cables and what not..
    thanks
    http://www1.viewsonic.com/products/vp950b.htm#tabbox_overview

  • Can't get any audio "changers" working

    Hello, I have HP Pavilion 2250so, and I can't get any audio changer or like that working. I can't get Dolby Advanced Audio working and the IDT Audio which is already on my computer doesn't work, evey time I try to start that, it says -"IDT PC Audio has stopped working. I don't mean that I don't have sound in my computer, no I have but I can't get those audio programs working which are like equalizer in Windows Media Player 11 that you can add bass boost and stuff. Any help?

    I would recommend that you first try updating the IDT Driver using the following link: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-112600-1&cc=us&dlc=en&lc=en...
    If that doesn't seem to help, try updating your BIOS: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-116222-1&cc=us&dlc=en&lc=en...
    Let me know if either of those helped to resolve your issue or not. If they do not, let me know and I will see if I can find anything else to help you.
    Best of luck,
    Kyle
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Is there a way to get a version of the Garage Band app that runs on version 5.1.1?  I have an iPad 1 and can't get any higher iOS.  The App store is telling me that Garage Band only runs on iOS 7.

    Is there a way to get a version of the Garage Band app that runs on version 5.1.1?  I have an iPad 1 and can't get any higher iOS.  The App store is telling me that Garage Band only runs on iOS 7.

    Unfortunately the answer is still no.

  • I can't get any audio recording to work in Logic X.

    I got a new Imac, an Apogee duet and Logic X.
    I just got Logic X and I really love everything about it accept I can't record any audio recordings on it.
    I can use my old Logic and garageband files and play around and mix them with no problem. The midi works fine as well coming trhoug my headphones and monitors.
    Somehow I can't get the Audio to be heard or recorded. Which is a real bummer since I got only 6 songs left on my new album and it is an acoustic album. I bought Logic so I could master the first 5 and the record the last 6. But I'm stuck with garageband at the moment. Because that actually can record the audio throug my duett with no problem. Then I open the songs up in Logic and master and mix them..
    Ay ideas?

    If you can record and hear audio in Garageband, it must be down to something in Logic - have you checked the Audio tab in Logic's Preferences and selected your Duet as Output and Input device ?

  • Can't get any video playback in program or source monitor after updating premiere

    I'm having a problem I hope someone might be able to shed some light on. I just updated my premiere pro cc to v8.2 Everything Worked fine before I updated.  Now I can't get any video to play back. I can hear the audio in my timeline but the video does not show up. When I export though everything is fine and the video is there. So basically I cant get any video to play in my program monitor or my source monitor.

    Please double-check that the same sequence that's open in the current Timeline is also loaded in Program Monitor. We recently discovered a bug that resulted in the Program Monitor having a different sequence loaded than the active Timeline. The scenario in which this occurs is as follows:
    Open two sequences (or more) in the same panel, say Seq_A and Seq_B.
    Set focus on Seq_B.
    Maximize the Project Panel.
    Double-click Seq_A in the Project Panel.
    At this point, the Project Panel reverts to its normal size and the Program Monitor loads Seq_A, but Seq_B remains in front of Seq_A. This disconnect persists if you set focus on the Seq_B Timeline; when Seq_B is played with things in this state, you will hear that sequence's audio, but the Program Monitor will remain static.
    This is not likely to explain your situation, but it's worth ruling out before pursuing further troubleshooting.

  • Mountain Lion downloaded from App store will not install. Downloaded TWICE it times out after 20 secs into install. Can't get any help!!! My Machine MacBook Pro  OS 10.6.8   Processor 2.66Ghz i

    Mountain Lion downloaded from App store on 11th and 12th June will not install. Downloaded TWICE it times out after 20 secs into install. Can't get any help!!! Going around in circles!!
    My Machine MacBook Pro  OS 10.6.8  
    Processor 2.66Ghz i7,
    4GB memory
    128GB solid state drive
    Purchased 2010

    Thanks very much for the advice. I trawled through the other answers on the site and it appears others had the same issue. I doubled the available space and the install went like clockwork... which is what one would norma;ly expect from Apple :-)
    Maybe Apple should have a ' definitely read me first' notice before a download takes place with CLEAR instructions to have more than the 6GB they indicate ofr the Mountain Lion download

  • How can I get the audio only from a home made video

    I have several home videos saved on my iPhone and I am wondering if I can get the audio off of the videos to make an audio CD. I have a PC. Windows 7

    Put the clip in an iMovie Project. Then share the project using the SHARE menu,
    Use SHARE/EXPORT USING QUICKTIME
    Choose SOUND TO AIFF.
    AIFF is an uncompressed audio format. You can use iTunes or GarageBand if you need to convert it to AAC or MP3.

  • I can't get any audio in Premiere CS6

    Hi,
    I am unable to get the audio to play in Premiere. I tried audio harware settings, no luck. It is not muted that I can see and the sound is playing in the camera.
    Thanks,

    More information needed for someone to help... please click these links and provide the requested information
    -Information FAQ http://forums.adobe.com/message/4200840
    -Effective questions http://forums.adobe.com/thread/416679
    -How to get help quickly http://forums.adobe.com/thread/419406
    What are you editing, and does your project match your video?
    Please NOTE that the PPro CS6 screen may look a bit different (I use CS5)
    For CS5 and later, the easy way to insure that your video and your project match
    See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
    -and a FAQ on sequence setting http://forums.adobe.com/message/3804341
    When your project sequence is correct, you will not see a red line over your timeline at first import, before you do anything to the video
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
    Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
    For Mac http://mediainspector.massanti.com/

  • I can't get any audio when i use airplay and I'm on youtube

    whenever i try to watch youtube on my tv using my laptop i get no audio from my speaker system it will play on my laptop speakers and only show the image on the tv. but my itunes is the oposite it will play on my speaker system but wont show my itunes on my tv

    If help is desired, more information is required.
    Mac or Windows?
    OS Version?
    iTunes Version?
    What Gen ATV? 1, 2, or 3?

  • Can't get any audio ("no input or output devices") on MacBook Air, running MAC OSX 10.8.5

    This happened today completely out of the blue.
    I have tried some of the other suggestions posted here and other forums. I did a Disk Utility check and nothing seems wrong with the hard disk,
    Rebooted 3 times.
    Re-set the PRAM
    Tried headphones (still no response from either audio volume key, as both show a circle with line through it,
    and tried System Preferences on Sound, but I get the same message (no devices).
    Tried to locate the preferences file called BezelServices that others have talked about, but can't find it...
    Ted

    This link may help: http://community.m-audio.com/m-audio/topics/m_audio_project_mix_i_o_driver_for_m ountain_lion
    I haven't tried it myself, but I do plan to in the near future, as I dont want to shell out major bucks for a new control surface/interface.

Maybe you are looking for