I can't get any audio recording to work in Logic X.

I got a new Imac, an Apogee duet and Logic X.
I just got Logic X and I really love everything about it accept I can't record any audio recordings on it.
I can use my old Logic and garageband files and play around and mix them with no problem. The midi works fine as well coming trhoug my headphones and monitors.
Somehow I can't get the Audio to be heard or recorded. Which is a real bummer since I got only 6 songs left on my new album and it is an acoustic album. I bought Logic so I could master the first 5 and the record the last 6. But I'm stuck with garageband at the moment. Because that actually can record the audio throug my duett with no problem. Then I open the songs up in Logic and master and mix them..
Ay ideas?

If you can record and hear audio in Garageband, it must be down to something in Logic - have you checked the Audio tab in Logic's Preferences and selected your Duet as Output and Input device ?

Similar Messages

Can't get my audio clip to work in Keynote except in edit mode. I've followed Help instructions to the letter. Any suggestions?

Can't get my audio clip to work in Keynote except in edit mode. I've followed Help instructions to the letter. Any suggestions?

Hi Gary - thanks so much for your help. I'd already done that, but finally stumbled across the answer for my situation. I'm new to iMac and this is the first time I used Keynote, so maybe this info will help someone else along the way - I still haven't found this in any of the Keynote documentation or forums I've read.
My slides were all set up with at least one text box in which the text was animated. The sound was the last thing I added to each slide, exactly following the info in Keynote Help re: adding audio. The audio would work when I tested it in Inspector mode, and also if I switched to soundtrack instead. But not if sound was added to each individual slide. Hmmm. After I submitted the question above, I was running through the (auto) slide show one final time to check text, animation, etc. when I noticed that on just one single slide the sound effect came through, but at the very tail end of the slide. Hmm again. Why?
Through trial & error, the answer was in the animation section - not very intuitive re: audio. The steps to correct the issue were: 1) click on the sound icon embedded in each slide, 2) click on the animation tab in Inspector. 3) There's a drop-down menu there that allows you to reposition the audio clip to the #1 spot (if it was added after other "animation"). This allows the sound to begin before the text animation begins on each slide. Before doing this, I guess the sound was in there but the slides were transitioning before it had a chance to play.
Since this is the first time I've used Keynote and it's the most recent version, I'm not sure if this is a new feature to allow users to choose where within a slide to play a sound effect, but I'm guessing that might be why was unable to find any info on how to solve it. Hopefully this will help others who get stumped.
Thanks again for jumping in to help! I really appreciate it.

I can't get any audio on my view sonic with apple tv?

I can't get any audio on view sonic tv model N2750W
when apple tv is plugged in. any solutions?

can anyone offer me a set up guide w/ apple tv for this? specific cables and what not..
thanks
http://www1.viewsonic.com/products/vp950b.htm#tabbox_overview

Can't get any audio "changers" working

Hello, I have HP Pavilion 2250so, and I can't get any audio changer or like that working. I can't get Dolby Advanced Audio working and the IDT Audio which is already on my computer doesn't work, evey time I try to start that, it says -"IDT PC Audio has stopped working. I don't mean that I don't have sound in my computer, no I have but I can't get those audio programs working which are like equalizer in Windows Media Player 11 that you can add bass boost and stuff. Any help?

I would recommend that you first try updating the IDT Driver using the following link: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-112600-1&cc=us&dlc=en&lc=en...
If that doesn't seem to help, try updating your BIOS: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-116222-1&cc=us&dlc=en&lc=en...
Let me know if either of those helped to resolve your issue or not. If they do not, let me know and I will see if I can find anything else to help you.
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

I can't get any audio in Premiere CS6

Hi,
I am unable to get the audio to play in Premiere. I tried audio harware settings, no luck. It is not muted that I can see and the sound is playing in the camera.
Thanks,

More information needed for someone to help... please click these links and provide the requested information
-Information FAQ http://forums.adobe.com/message/4200840
-Effective questions http://forums.adobe.com/thread/416679
-How to get help quickly http://forums.adobe.com/thread/419406
What are you editing, and does your project match your video?
Please NOTE that the PPro CS6 screen may look a bit different (I use CS5)
For CS5 and later, the easy way to insure that your video and your project match
See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
-and a FAQ on sequence setting http://forums.adobe.com/message/3804341
When your project sequence is correct, you will not see a red line over your timeline at first import, before you do anything to the video
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/

I can't get any audio when i use airplay and I'm on youtube

whenever i try to watch youtube on my tv using my laptop i get no audio from my speaker system it will play on my laptop speakers and only show the image on the tv. but my itunes is the oposite it will play on my speaker system but wont show my itunes on my tv

If help is desired, more information is required.
Mac or Windows?
OS Version?
iTunes Version?
What Gen ATV? 1, 2, or 3?

Can't get any FX expansions to show in Logic pro x

I had BFD Eco and Arturia spark working on Logic 9 so I could use them as instruments. I had Avox toolkit working on FX expansion. I can't even find any of them on X. I deleted the audiocache file a while back and it isn't there to delete now. I have run Au manager several times. I've downloaded the latest legacy drivers, and looked at "get info" to find that one can't open X in 32 bit mode. I am out of ideas. I just upgraded to OS 10.8.4 as well.
Help???

..and can only run 64bit AU Plugins..... which is why you cannot see or use 32bit only AU Plugins.... in LPX
There are some workarounds... if there isn't a 64bit version of your plugin available...
The Pro End solution is to use VEP5 as a host.... for hosting 32bit AU plugins in LPX. You can also connect slave Macs (and PCs so you can run Windows VSTs within Logic) to your main Mac running Logic to spread the load of different plugins within your network... This is what I use here and couldn't live without these days...
http://www.viennaensemblepro.com
A cheaper alternative that is much less flexible... but works with some 32bit plugins is 32 Lives
http://www.soundradix.com/products/32-lives
There is also a 'free' method that might work for you.....
http://www.macprovideo.com/hub/logic-pro/how-to-run-32-bit-plug-ins-in-logic-pro -x

I can't get any audio playback from FCP X (or Premier Pro for that matter)â¦

When I playback a clip with audio it shows good level in the meters but I get no sound from any device (internal speakers, USB headphones, 3.5mm Headphones etc etc). If I render out a clip the audio is there and plays back in QuickTIme.app.
There are a few suspicious things like not being able to adjust the Master level slider in Sound Prefs, it's locked to Max position. I first became aware of this problem when I left After Effect and went to Premiere Pro to do an video comp that AE was choking on. PPro handled it well but no sound. Decided to try doing it in FCP X even though the interface is hard for me to 'get' striaght away I found stuff online about travel mattes but still no sound. Very frustrating I have a deadline — don't we all ;-)
Any ideas?
I uninstalled SoundFlower just in case. No difference. In the Audio MIDI Setup Utility.app, PremierPro and After Effexts come up as discrete devices:
About to try zap the PRAM can't think what else to do although I found an article that says trash the audio prefs one by one.

Make an appointment to your nearest Apple Genius bar.

Can't get any audio ("no input or output devices") on MacBook Air, running MAC OSX 10.8.5

This happened today completely out of the blue.
I have tried some of the other suggestions posted here and other forums. I did a Disk Utility check and nothing seems wrong with the hard disk,
Rebooted 3 times.
Re-set the PRAM
Tried headphones (still no response from either audio volume key, as both show a circle with line through it,
and tried System Preferences on Sound, but I get the same message (no devices).
Tried to locate the preferences file called BezelServices that others have talked about, but can't find it...
Ted

This link may help: http://community.m-audio.com/m-audio/topics/m_audio_project_mix_i_o_driver_for_m ountain_lion
I haven't tried it myself, but I do plan to in the near future, as I dont want to shell out major bucks for a new control surface/interface.

Can't get iPhone 5 recording to work using Quicktime on Yosemite

QuickTime on Yosemite now has this nifty feature where you can record your iPhone, provided you connect it using a lightning cable. Now I've done all that, but when I open QuickTime and select my iPhone from the dropdown menu next to the record button on QuickTime, it stutters and fails to pull my iPhone's image to my mac. If I press record anyways, it crashes.
One thing that does happen is that it keeps reopening iPhoto asking if I want to import photos from my phone. (a little annoying.) Maybe the cable is bust? It works fine in any other occasion.
Who else has this problem? I need the recording function pretty badly...

I'm having a similar issue. I'm trying to record some games on my iPhone 6 Plus. My Macbook Pro is from 2010 and still running strong. However, I'm getting crashes when trying to record Vain Glory. I can record other games like Grand Theft Auto: San Andreas. Quicktime on the Mac just seems to be crashing with certain iPhone apps. Weird issue.

How can i get my audio files to work on other computers in powerpoint?

I have made a powerpoint presentation for a class. The task was to record ourselves speaking and import the audio files to go along with a slideshow presentation. I recorded in GarageBand and imported the files to iTunes and then into my presentation. The slideshow works on my computer, but once I try to play it on any other computer (both Mac and PC) the audio files are "unavailable" and don't play. What do I need to do so that the files can play?

I don't use PowerPoint much these days, but I found this...
http://office.microsoft.com/en-us/powerpoint-help/embedded-and-linked-sound-file s-in-a-presentation-HA001230307.aspx
(It says to put the audio files in the same folder as the presentation file.)

Can't get any file sharing to work

I have 10.6.2 installed on a mac pro and mac book pro, and I can't share anything between them. Both have file sharing turned on, both have these exceptions allowing incoming connections with the built in firewall. Not only can I not mount or connect to the other computer through file sharing, the itunes home sharing doesn't work, and the iphoto sharing doesn't work either.
Since nothing seems to work, it makes me think the router has something to do with it. I am using the Verizon FiOS Actiontec router. I would appreciate any help in finally getting my home network of 3 macs actually working together.

UPDATE:
i restored my factory router settings, and rebooted the router, and now the mac pro sees the laptop, but not vice versa. connecting mac pro to laptop worked one time, then failed after that. and itunes home sharing still doesn't work.
Message was edited by: Jonny Apple Seed

I can't get any google related pages working since last security update

Does anyone know how I can uninstall an update? This is driving me crazy. Just started a couple days ago. A few other sites I use often have stopped working as well. I'm also using safari 3.1.2 which I also downloaded recently.
Any help greatly appreciated

Try this:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Can't get any USB mouse to work!!!!!

I have a MacBook Pro running Snow Leopard. Everything was fine with my Microsoft USB mouse until 2 days ago when it stopped responding. I put it down to my son having dropped it and bought a Logitech M505 USB mouse today. This is not recognized either and won't work. I've tried plugging the unifying device into both USB ports but it simply won't work and I'm told there is no Logitech device plugged in. Can anyone help me? Please!?!

I used my USB scanner last night and that worked fine and also when I plug in the receiver for the Microsoft mouse the light comes on so I figure everything is ok with the actual USB port? In system profiler/USB I can't see anything that would indicate a problem. Where would I have to look exactly? Is there some kind of test I can run to see if there is a problem?

How can i get a downloaded plugin to work in logic pro x?

i tried to put massive into logic pro x but i cant get it to work! ive insertet it to the folder plug-ins, components which everybody told me to do but i cant find it
in logic once i did that! Please help me!

If the OP did purchase Massive.. then just running the installer would have automatically installed it into the correct location...
So... what's the bet eh Pancenter?

I can't get any audio recording to work in Logic X.

Similar Messages

Maybe you are looking for