I can't get background audio to work in garage band 1.3 ios6.1 .also no options in settings to turn it on?

I can't get background audio to work in garage band 1.3 iOS 6.1 also no option in settings to turn on or off?

I had the same problem, try this:
In your home directory, go to Library/Caches/
(make sure you are in the library in your home directory, not the library at the root level of the hard disk).
and remove this file: com.apple.audiounits.cache
You can drag it to your desktop if you like or throw it away.
Then relaunch garage band, it will rescan all audio units.
If you have the Kontakt audio unit installed in YourHardDiskName/Library/Audio/Plug-Ins/Components it should recognize it and include it in your list. You can toss that cache file any time you want Garage Band to rescan your audio units.
I had a problem with Kontakt on an upgrade that broke it, GarageBand saw it and put Kontakt on its list of broken Audio Units, it would never load it after that... after a new rescan, it was fine.
Good luck

Similar Messages

HELP. CAN'T GET KNOTACT 2 TO WORK IN GARAGE BAND 08.

Hey All,
First time poster here. According to the Kontact 2 manual, it should be stupidly simple to use Kontact 2 in Garage Band 08. Just create a track, go to the "Sound Generator," click on "Kontact 2," and play. Great! Bottom line, I never see "Kontact 2" in the sound generator. I've reinstalled, called both Apple and Native Instruments and no one has any answers.
Has anyone run into this problem with not having the Kontact 2 AU plug-in show up in Garage Band 08? It's driving me crazy to have to play Kontact 2 out of one computer into an input of Garage Band on another computer. It's ridiculous.
J Dean

I had the same problem, try this:
In your home directory, go to Library/Caches/
(make sure you are in the library in your home directory, not the library at the root level of the hard disk).
and remove this file: com.apple.audiounits.cache
You can drag it to your desktop if you like or throw it away.
Then relaunch garage band, it will rescan all audio units.
If you have the Kontakt audio unit installed in YourHardDiskName/Library/Audio/Plug-Ins/Components it should recognize it and include it in your list. You can toss that cache file any time you want Garage Band to rescan your audio units.
I had a problem with Kontakt on an upgrade that broke it, GarageBand saw it and put Kontakt on its list of broken Audio Units, it would never load it after that... after a new rescan, it was fine.
Good luck

Can't get any audio "changers" working

Hello, I have HP Pavilion 2250so, and I can't get any audio changer or like that working. I can't get Dolby Advanced Audio working and the IDT Audio which is already on my computer doesn't work, evey time I try to start that, it says -"IDT PC Audio has stopped working. I don't mean that I don't have sound in my computer, no I have but I can't get those audio programs working which are like equalizer in Windows Media Player 11 that you can add bass boost and stuff. Any help?

I would recommend that you first try updating the IDT Driver using the following link: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-112600-1&cc=us&dlc=en&lc=en...
If that doesn't seem to help, try updating your BIOS: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-116222-1&cc=us&dlc=en&lc=en...
Let me know if either of those helped to resolve your issue or not. If they do not, let me know and I will see if I can find anything else to help you.
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

How can I get instructions for old versions of Garage Band please, eg Garage Band 3 and Garage Band 6?

How can I get instructions for old versions of Garage Band please, eg Garage Band 3 and Garage Band 6? thanks

meredithfromkybybolite wrote:
How can I get instructions for old versions of Garage Band please, eg Garage Band 3
http://manuals.info.apple.com/en/GarageBand_3_getting_Started.pdf
meredithfromkybybolite wrote:
and Garage Band 6?
GB6 is the latest version, so all current docs should directly refer to that.

Can't get the Audio to work

I'm putting together a piece for school but can't seem to get the imported audio to work. I purchased some songs off of iTunes and imported them into Final Cut, but there is no audio when I play the film. There aren't even any audio waves on the timeline or viewer box. Does anyone know what I can do to fix this? I need it ASAP! Thanks.

Sorry - by purchasing the music on iTunes you don't have the rights to actually use them in a video.
The DRM will keep you from doing so inside FCP.
CaptM

Can't get optical audio to work

I know this might be an issue with my A/V receiver, but I'm really stuck and frustrated and hoping someone can help. I've got the Apple TV connected direct to the TV since the receiver (A Denon AVR-688) doesn't support audio playback through to the speakers (or does it? can't get it to anyway). The optical audio I have connected to the optical port on the receiver so I can hear sound through the stereo. The port is labelled "CD" but my audio input source to CD, I get no sound through the stereo (just what's coming through to the TV via the direct HDMI connection). I must be setting something wrong. Can anyone help me?

I only see an option to set the "input" source (not output), which I have selected as CD as I have no CD player, and it's the default setting anyway. Regardless, I'm sure I've got something set up wrong just can't figure out what it is. Ugh!

How can I get the audio to work again?

I have no audio output (external or internal) on my computer. When I click on the speaker is is in gray. When I go to sound in network preferences and go to output it only lists digital output/built-in output and is says the selected device has no output controls. There are no other choices than this. The input sound is working but not the output on the internal speaker or through the jack. Please help.

My computer is not under warranty and it's over 4 hours to a mac store. I did the paperclip thing very lightly as I did feel uncomfortable doing this.
So what did you do or did support do to resolve your issue? I do appreciate you taking the time to try to help. Hopefully you can help me.

When I connect my Apple TV to a computer monitor there is video but no audio. How can I get the audio to work?

The headphone jack on the monitor doesn't seen to work with the Apple TV either.

Welcome to the Apple Community MPR888.
What type of connection are you using on your monitoe, if DVI, DVI doesn't carry audio, you will need to use the optical connection for audio.

Help getting streaming audio to work?

I am a new user to Mac OS as of a few weeks ago. I'm making the transition fairly well.
Using Safari, I can't get streaming audio to work on my hometown radio show.
Here's the link to the home page... http://www.kdkaradio.com/ Near the top right of the page is a button to listen live.
I read somewhere that you have to have Windows Media Player installed and I did that and it still doesn't work. I thought you might need a plugin with Firefox and I can't get it to work either.
Any help would be greatly appreciated,
Thank you,
Dan
MacPro Mac OS X (10.4.8)

Welcome to Apple Discussions and Mac Computing.
Glad to hear the transition is easy. You might find
Scott Kelby's book
OS X Tiger: Killer
Tips helpful.
To your question:
Windows Media Player does not play natively on Intel
machines. You need to use the free
Flip4Mac plug-in as a
substitute for WMP. Microsoft has stated they do not
plan to create a Universal Binary app. for the
Windows Media Player.
On my machine:
No go on Safari. When I select "live" I get to the
page showing a template of a music player, but no
sound.
On Firefox, a separate sound panel opens, however,
the feed stops before sound occurs. Strange though,
the various highlight feeds do play with no problem.
I suggest you contact the web developer at the
station for clarification regarding the Mac
platform, and just what is compatible with their
content stream.
I'm using Flip4Mac in place of WMP.
Thank you very much for your help and support.
I uninstalled Windows Medial Player and installed Flip Mac.
I'll have to check out your book suggestion.
I am still getting the same error, page not found when trying to listen live. All the other feeds work fine. I emailed the radio station to see if they could resolve the problem.
Thanks again,
Dan

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

Will not work. To my knowledge, dual converting like that isn't supported. The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

Can't get my audio clip to work in Keynote except in edit mode. I've followed Help instructions to the letter. Any suggestions?

Can't get my audio clip to work in Keynote except in edit mode. I've followed Help instructions to the letter. Any suggestions?

Hi Gary - thanks so much for your help. I'd already done that, but finally stumbled across the answer for my situation. I'm new to iMac and this is the first time I used Keynote, so maybe this info will help someone else along the way - I still haven't found this in any of the Keynote documentation or forums I've read.
My slides were all set up with at least one text box in which the text was animated. The sound was the last thing I added to each slide, exactly following the info in Keynote Help re: adding audio. The audio would work when I tested it in Inspector mode, and also if I switched to soundtrack instead. But not if sound was added to each individual slide. Hmmm. After I submitted the question above, I was running through the (auto) slide show one final time to check text, animation, etc. when I noticed that on just one single slide the sound effect came through, but at the very tail end of the slide. Hmm again. Why?
Through trial & error, the answer was in the animation section - not very intuitive re: audio. The steps to correct the issue were: 1) click on the sound icon embedded in each slide, 2) click on the animation tab in Inspector. 3) There's a drop-down menu there that allows you to reposition the audio clip to the #1 spot (if it was added after other "animation"). This allows the sound to begin before the text animation begins on each slide. Before doing this, I guess the sound was in there but the slides were transitioning before it had a chance to play.
Since this is the first time I've used Keynote and it's the most recent version, I'm not sure if this is a new feature to allow users to choose where within a slide to play a sound effect, but I'm guessing that might be why was unable to find any info on how to solve it. Hopefully this will help others who get stumped.
Thanks again for jumping in to help! I really appreciate it.

I can't get any audio recording to work in Logic X.

I got a new Imac, an Apogee duet and Logic X.
I just got Logic X and I really love everything about it accept I can't record any audio recordings on it.
I can use my old Logic and garageband files and play around and mix them with no problem. The midi works fine as well coming trhoug my headphones and monitors.
Somehow I can't get the Audio to be heard or recorded. Which is a real bummer since I got only 6 songs left on my new album and it is an acoustic album. I bought Logic so I could master the first 5 and the record the last 6. But I'm stuck with garageband at the moment. Because that actually can record the audio throug my duett with no problem. Then I open the songs up in Logic and master and mix them..
Ay ideas?

If you can record and hear audio in Garageband, it must be down to something in Logic - have you checked the Audio tab in Logic's Preferences and selected your Duet as Output and Input device ?

HT1386 I have an app called ipieta which was originally downloaded onto an ipod. I gave the ipod to someone else, but now that I've had the iphone I can not get the audio even though it is downloaded into itunes music like it said to do. It won't work.

I have an app called ipieta which was originally downloaded onto an ipod. I gave the ipod to someone else, but now that I've had the iphone I can not get the audio even though it is downloaded into itunes music like it said to do. It won't work. I've tried more than several times to get help but nothing helps. Do I need to deauthorize the ipod or perhaps erase all the downloaded ipieta stuff and start over?
Thanks for any suggestions

Sorry. There's nothing anyone can do. The current version of the facebook app will not run on 4.2.1. The iPhone 3G won't run anything higher than 4.2.1. You're stuck.
Maybe it's time to buy yourself a new iPod Touch.

Can't get the software to work with Audigy 2

Hi, I have had my Audigy 2 ZS going on a year now and haven't had any problems. I recently made a clean install of Windows XP and upgraded to SP2 and all that. Now, I can get sound out of the card but can't get the software to work at all; cannot get the volume slider bar to appear when I click the icon (it appears in the task bar though and I get a small gray square where the slider should appear), the surround mixer does not show when I double click the volume icon, EAX conxole is a no go, get an empty error box when I try to start the Equaliser.
I have tried everything from simple re-install to clean sweep to praying to the pagan gods. I have alsoo tried updating the drivers of course.
I run XP on an Intel MoBo (on-boeard sound deactivated), 52RAM, ATI 9700 ALL-IN-WONDER.
DOES THE CREATIVE SOFTWARE DEPEND ON ANY WEIRD LITTLE WINDOWS SERVICE OR SETTING THAT I MIGHT HAVE CHANGED DURING SETUP?
This is quite infuriating as any idea I come up with takes up a lot of time in installation, uninstallation and clean up. It worked before, why not now?
Thanks in advance. dentore

Ok I got it to work. This is the reply I got from Creative but I didn't remove the program from the add/remove option on the PC b/c that didn't work at first. I inserted the installation CD and remove it from that wizard. Rebooted and the PC found new hardware. I then installed the driver and software from the CD and now it works.
For Mediasource. It appears something was corrupted in Mediasource or there is a conflict within the system.Please uninstall all software and drivers for the soundcard, from add/remove programs. Once this is done, shut down the system and changePCI slots for the soundcard, then turn the system back on, cancel the found new hardware wizard, disable all background applications (especially virus scanner, firewall, and any other background applications running in the bottom right hand corner of the system), andthen perform a full reinstallation of the drivers and software from the soundcard installation cd.
CAT I hope you fix your sound card. Good luck.

Can't get SSL plug to work

Can anyone tell me why I can't get this freebie to work?
http://www.solid-state-logic.com/resources/lmc1plugin.html
I'm trying to use the AU version on an Intel iMac, it doesn't say anything about universal binary. My Logic Express AU manager is not seeing it. The installer is placing the entire SSL LMC-1 component folder in my component folder (library>audio>plugins>components). Logic's AU Manager is seeing nothing regardless of rescans. Thanks.

Can anyone tell me why I can't get this freebie to
work?
http://www.solid-state-logic.com/resources/lmc1plugin.
html
I'm trying to use the AU version on an Intel iMac, it
doesn't say anything about universal binary. My Logic
Express AU manager is not seeing it. The installer is
placing the entire SSL LMC-1 component folder in my
component folder (library>audio>plugins>components).
Logic's AU Manager is seeing nothing regardless of
rescans. Thanks.
I had this plugin. It is NOT Universal Binary, and as such is NOT compatibel with Intel machines.
Cheers
Egyptian Merchet and Groma Mac OS X (10.4.9) Black Coffee and a black Staffordshire Terrier

I can't get background audio to work in garage band 1.3 ios6.1 .also no options in settings to turn it on?

Similar Messages

Maybe you are looking for