I can't get email. Get POP3 error . can't connect to POP3 server. It's not email vendor issue ... c

Good afternoon. For over a week I can't get email on MY DASH. Can't see mail in my Gmail Viewer. Get a POP3 error ... can't connect to POP server. Thought it may be a Gmail interface issue so tried to get Hotmail and then Earthlink email in the Chumby email app. Both give same message POP3 Error , can't connect to pop3 server. I have done multiplr hard restarts / power off / "restore to normal operation" procedures. I have searched the discussions and community and can find no mention of POP server issues. Please help .... advise. I'm a disabled, but still working, senior citizen without a fancy, internet, cell phone and my Dash's ability to display my email is very important to me. I have the Dash at my bedside and My Dash allows me to see a message from a client before I would otherwise rise. Kind regards, Martin

Hi USER-901698,
This is not an issue with the Sony device.
We highly suggest to contact your email service provider regarding your concern.
For further information, please check the link below.
https://us.en.kb.sony.com/app/answers/detail/a_id/32749/p/46543,46552,46553/c/65,66/kw/pop3
Thanks,
>Joffrey
If my post answers your question, please mark it as "Accept as Solution"

Similar Messages

When using my ipod, i get an error message cannot connect to the server

I have an ipad 2 and Ipod touch 4th gen. Safari works fine on the ipad but occassionally, I get an error message of "cannot connect to server" on the ipod when I use safari. But the ipad still can connect with NO problem. Can someone explain why this happens and how to fix it?
Thanks

Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

When opening pdfs with windows explorer I get "fatal error unable to connect to dde server"

I can't open pdfs using windows explorer. I double click, nothing happens, and after ten minutes I get the error message "fatal error Acrobat failed to connect to DDE server."
I can however open the file if I open it in acrobat, although it is very slow.
I always download the latest version of acrobat indeed did so last week. I'm on windows 7. I've had acrobat for many years on this machine and OS and never had this problem.

Hey Eric,
I’d suggest you to uninstall Adobe Reader XI using this cleaning tool Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs and re-install Adobe Reader using this link Adobe Acrobat Reader DC Install for all versions to fix the issue.
Re-install the program in administrator mode. Locate the program icon, right-click and select as “Run as administrator”.
Let me know if the issue persist.
Regards,
Aadesh

Sql developer 1.5.4 can't connect to SQL Server: "SSPI library not loaded"

Hi,
as Dana N. pointed out in her thread (Re: How do I make a connection to SQL Server Express using SQL Developer 1.5.3? I get the same error:
error: Status: Failure test failed I/O error: SSO failed: Native SSPI library not loaded. Check the java.library.path system property
But ... I'm on sql developer 1.5.4.59.40 and tried with both the jtds from the download via "Help -> Check for updates" and the jtds-1.2.2-dist.zip from sourceforge. Both times I configured the 3rd-party-driver in "Tools -> Preferences -> Database -> Third Party JDBC Drivers" as described in http://www.oracle.com/technology/oramag/oracle/08-may/o38sql.html.
The error above remains.
Can someone please give a hint on "java.library.path system property"?
Where can you find it?
Regards,
Frank.

Hi Frank
This message means that the driver code is unable to locate a DLL to load up and use. Looking at the message I suspect that the DLL in question <jtds-dist>\SSO\ntlmauth.dll .
There are a couple of ways of making the Java VM locate the DLL, assuming you are using windows then the easiest would be to add the directory <jtds-dist>\SSO to you path environment (replacing <jtds-dist> with the actual path to your JTDS distribution).
Regards
Rob Cooper

I keep getting an error message while connecting to the server ("Unknown error") and there is no way to reset preferences on Mac OS X.

My sync preferences keep disappearing and I keep getting the "Unknown error" error message.

Hi!
The sync infrastructure is having some issues and we are working to fix them as soon as possible.
Check this site for the latest updates: https://services.mozilla.com/status

Whenever I use a search engine, I keep getting the error message "The connection was reset while the page was loading".

I am able to access the internet, but none of the search engines like Google, Yahoo or Bing will work. the page will not load. I get the error message:
The connection to the server was reset while the page was loading.
* The site could be temporarily unavailable or too busy. Try again in a few moments.
* If you are unable to load any pages, check your computer's network connection.
* If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

Your plugins list shows two Flash plugins and other outdated plugin(s) with known security and stability risks.
# Shockwave Flash 10.0 r45
# Shockwave Flash 10.1 r53
# Adobe Shockwave for Director Netscape plug-in, version 11.0
# Next Generation Java Plug-in 1.6.0_19 for Mozilla browsers
Flash Player uninstall: http://www.adobe.com/go/tn_14157 (this will remove the Firefox Flash plugin and the ActiveX control for IE)
Update the [[Flash]] and [[Shockwave|Shockwave for Director]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
*http://www.adobe.com/shockwave/welcome/
*http://www.adobe.com/downloads/
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
Do a malware check with a few malware scan programs.<br />
You need to use all programs because each detects different malware.<br />
Make sure that you update each program to get the latest version of the database.
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

Internet Download error message: the connection with the server has been reset

With an WRT54GS v6 firmware v 1.50.9 on Windows XP SP2 with Internet Explorer 7, Intel wireless internal adaptor w/ 802.11b, I was getting the error message "The connection with the server has been reset" when downloading most anything from the Internet. My IP address would then be reset and download would be interrupted. To resolve, I turned off the WZC (Wireless Zero Configuration) Services, and this seems to correct the problem.
Control Panel > Admin Tools > Services > Wireless Zero Configuration > Disable
Hopes this helps.

Hi!
Im using Windows 7.... I tried looking for the Wireless Config - but it isn't in the Services options!
So, what can I do now?
Thanx

HT204053 I am running Windows 7 and have tried to install iCloud. No matter what instructions I follow, I still get the error message "This Apple ID is valed but is not an iCloud account." How can I resolved this?

I am running Windows 7 and have tried to install iCloud. No matter what instructions I follow, I still get the error message "This Apple ID is valed but is not an iCloud account." How can I resolved this?

I've tried both. First, I tried on my pc, where iTunes had installed iCloud when it last updated. I have iTunes installed on this computer (and on my iPad and iPhone), but that wasn't the issue.
So I went online, thinking I needed a separate iCloud Apple ID, but it prompted me for my current Apple ID and gave me the message about my ID being "valid" but not an iCloud account," which, lol, was what it had asked me to do in order to create one. I checked, and at least one other user is having the same issue. I'll attempt to copy/paste the Support request url: https://discussions.apple.com/thread/4430653?tstart=0
Thank you for any help you can give.
Trish

TS3899 getting an error, "unable to connect to server" when trying to access his yahoo email account. no different user name/wifi is off.

getting an error, "unable to connect to server" when trying to access yahoo email account. I did not change my password, but now everytime I try to access my email from my IPhone 4s, I get the error.

Try the Yahoo mail app.

I can't sign into my account on my iPod whenever I do I get a error saying 'cannot connect to iTunes'

Whenever I try to sign into my iTunes account on my iPod I get an error saying "cannot connect to ITunes" It once in while works but thats like once a year chance
And I already checked everything Apple talked about and it still didnt work can someone please help me because I cant download or even do anything

Have you looked here:
Apple ID: "This Apple ID has been disabled for security reasons" alert appears
Try logging out of the iPOd and then reset the iPod and then login.

Every time I install an update of itunes, I get an error message saying: "/System/Library/Extensions/WkClassicNotSeizeDriver.Kext" was not installed Correctly. Has any one had it? Can you help me?

Every time I install an update of itunes, I get an error message saying: "/System/Library/Extensions/WkClassicNotSeizeDriver.Kext" was not installed Correctly. Has any one had it? Can you help me?

Find out what that third party software the kext file belongs to and update or use the developers method to uninstall the third party software responsible for it.
I suspect it's a iTunes extension perhaps?
You also can use the manual method of Finder > Go > Computer and opening your drive, then your System/Library/Extensions folder and looking for the file and moving it out onto the desktop, you will need to be in Admin user and use your password, then reboot to clear the random access memory. However this method doesn't remove the parent program you still need to do that.
How to uninstall/install software on your Mac
The kext file wasn't loaded, so it's not running, but removing it from the Extensions folder or uninstalling what put it there will solve your notification problem as that's all it appears to be.

I get the error message in QuickTime "operation stopped the operation is not supported for this media" most times when I try and export an .AVI file as something else (.m4v). I have not touched the file in any way (no trimming, clipping or other editing)

I get the error message in QuickTime "operation stopped the operation is not supported for this media" most times when I try and export an .AVI file as something else (e.g. .m4v). I have not touched the file in any way (no trimming, clipping or other editing), all I want QuickTime to do is export the file in a compressed format. Bizzarely, if I shutdown and open QuickTime many times I can occasionally export a clip as another format (maybe one in 10 times). I have seen that other users have had a similar problem after clipping files in QuickTime but this seems to be a slightly different bug in that all I do is open the file and then try and export the file as is - either way, this is a very annoying bug

@Z_B-B, thank you for taking the time to respond to my cry for help. However, the link you supplied does not address the problem: I am not trying to export from Final Cut Pro to QuickTime, I am trying to export from QuickTime to the rest of the world (like people's iPhones and Ipads) in .m4v format (so I am not emailing my freinds such huge files).
If I were to spend hundreds of Dollars on a copy of Final Pro I could export directly from there and not have to bother with QuickTime, but I do not take enough video clips to justify the cost. I must say that I never had any of these problems before I decided to switch from Snow Leopard to Mountai Lion.

I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.

I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.
Help!
Thanks, Mark

Unfortunately, the error message gives no details about what codec might be missing or what it needs.
If the file can't be opened in QT, it only means you cannot use the QT "Inspector" window to check what compression formats were used to create the file. It does not mean you can't use the Finder "Information" window to check on the compression formats or use a third party media information window (e.g., like VLC which will open many compression formats not supported natively by QT) to determine what kind of data is included in the MOV wrapper. If the file cannot be opened in any app, it is usually a good sign that the file itself is corrupted.
It's a stupid error message. Apple should do better than that.
Error trapping is quite extensive but there are still many areas which require human oversight. The message is telling you that either the container has a problem (e.g., not properly terminated, non-standard, or corrupted) or that one or more of the compression formats used is not supported by your current codec component configuration or that the data was encoded using non-standard settings or preferences not supported by QT or that the fourCC code does not match the data contained in the file or that there are timecode inconsistencies, etc., etc., etc. In short there are a near infinite number of possible problems for which it would be very difficult/nearly impossible to program error trapping depending on your sourcing of content and how you process it before it reaches the player app. Think of it like trying to play a BD disc in an DVD player.
I'll call Apple support when I get a chance.
Chances are good that they will end up sending you back here. In any case, it is often a good idea to post a sample file for examination by other QT users. At the very least, they should be able to tell you if the sample file will play on other systems which would indicate whether or not the file itself is bad and under the best of circumstances whould allow them to examing the file in detail for various common problems.

I am getting "Fatal Error: null" when connection to P6v8.3.2 DB using P6 Integration API

I am getting "Fatal Error: null" when connection to P6v8.3.2 DB using P6 Integration API.
I can connect via P6 client using admin account but cannot connect using P6 API. If I provide invalid credentials it says that the credentials are incorrect. When correct credentials are provided, it comes up with the above error.
Stacktrace is atteched.
Please assist.
Thanks
Sunil

Hi Sunil,
In the absence of sample code it is difficult to identify the cause. If that is not possible, you can try logging SR with Oracle support.
Regards,
Sachin Gupta

I am getting an error when I connect my Ipod, I have used it on this laptop before but now it is saying "Ipod detected, but it could not be detected properly" Help please!

I am getting an error when I connect my Ipod, I have used it on this laptop before but now it is saying "Ipod detected, but it could not be detected properly" Help please

You can try going through this troubleshooting document
iPod nano: Error message saying that iPod 'could not be identified properly' - Apple Support

I can't get email. Get POP3 error . can't connect to POP3 server. It's not email vendor issue ... c

Similar Messages

Maybe you are looking for