I can't get Illustrator to work in the Yosemite Beta. Can anyone help?

Hi there,
I can't get Illustrator to work in the Yosemite Beta. Can anyone help?
Much appreciated,
Jon

Thanks so much for reaching out!!!!
Here’s what I am experiencing more specifically:
1. Illustrator is not showing up in my Application folder.
2. My creative cloud app manager says that Illustrator is installed.
3. I try to download it from Adobe.com and it never initiates the download.
Does that ring any bells?
Thanks so much for your help!
Grateful,
Jon
Jonathan Bailey
Co-founder at Lightstock
(214) 284-2597
@jonathanrbailey
On Wed, Oct 1, 2014 at 5:08 PM, Monika Gause <[email protected]>

Similar Messages

Is there a way to reset my messages account, I can't get iMessage to work on IPad nor Mac osx. Help please this is really frustrating.

Is there a way to reset my messages account, I can't get iMessage to work on IPad nor Mac osx. Help please this is really frustrating.

Hi,
Is there an iPhone involved ?
If not, what happens if you remove the Apple ID on the iPad and then set it in Airplane Mode (allow a couple of minutes at this point) followed by re-adding the Apple ID ?
What, if any error messages are appearing on the Mac when you try to launch the App or Login to the iMessages server ?
Is the Apple ID linked to an iCloud account ?
In Messages 7 (Mountain Lion) this did not seem to be important but it seems it is in Mavericks/Messages 8
9:14 pm Friday; April 11, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

I have a pioneer 50 inch plasma   I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.   The receiver has two HDMI inputs in the back.

I have a pioneer 50 inch plasma + I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.
The receiver has two HDMI inputs in the back. However they say they are not for PC's. Furthermore they must be set up by going to the home menu.    I tried everything, but I can not get the receiver to talk to the Apple TV. I even tried a connector that uses an HDMI to the Apple TV that has the other side of the cable as 5 RCA cables. I could not get the receiver to see the Apple TV.   I have a newer TV in the house, it has no problem talking with the Apple TV. But this older system seems to be handicapped in its ability to talk with the newer Apple TV system.
My Email is [email protected]
Do you have any suggestions
Thanks
Bob

I could not access the Apple TV on the television.   If I put the Apple TV directly into by TV, I have an external sound system (entertainment system), therefore I worry that I would by pass the audio.
Thanks for taking your time to attempt to help!   Any more suggestions would be greatly appreciated.
Bob

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

My ipad and iPhone have different email addresses in the FaceTime field but I can only get FaceTime to work on my iPhone, how can I get them both working on facebook

My ipad has a different email address than my iPhone, both are mine but I can only get FaceTime to work on my iPhone but seem unable to change the email address in that field

If the basics (restart, reset, restore from backup, restore as new) don't work, you'll need to bring the phone to Apple for evaluation

How can I get Live TV working on the new Android app

I have FIOS for internet and TV but do not use the Verizon router for WIFI (it is too slow and does not cover enough of my house). I just downloaded the new Android version of the My FIOS app with Live TV, but it will not let me view TV and tells me that I have to be connected to the FIOS router. The router I use for WIFI is connected to the FIOS router via ethernet. The app has asked for and received my Verizon credentials. So why won;t the app let me watch Live TV?

I have the same setup and the same issue.
Looks to me like the app isn't smart enough to make the double hop to the VZ router.
I changed my connection to connect directly to the VZ router and at least it now attempts to connect but still cannot get it to work - probably the now the signal is so bad that it never makes a connection.

I need help getting a new code for the yosemite beta because mine says it's already been used

I signed up for the yosemite beta and when I clicked the code to download the beta, nothing happened. I backed out and did it again and then it said the code was already in use. I have tried refreshing the page with the code in safari but the same one keeps coming back. I also signed out of the app store and logged back in to see if it was in my purchases and it doesn't show up. I need a little help here getting the beta.

There's a lot of results in Google when you search for this but unfortunately refreshing the page doesn't seem to generate a different code anymore. Mine also says already redeemed

I have a xD-PictureCard that I want to load pictures onto, from my iPhotos. The reader is a FinePix can I get it to work on the Mac. when I try it wont install the software. Is there any way i can load pics onto the SD card.

I have a xD-PictureCard (SD Card) that works in a picture frame. I have used it in the past on a Windows computer, now having an apple I want to change the pics and cannot. When I reload the discs for Mac they won't install. Is there anything I can do to put the pics on the SD card, I don't want to throw away the picture frame it cost a lot of money.

This should be perfectly possible and without loading any software at all.
Get a Card Reader for the XD card, and plug it into the Mac. It will then appear on the desktop. Drg the files to the Card. Make sure you keep the folder structure used on the Card - don't change that.
Regards
TD

New M5000 server - Can't get bge0 to work in the OS

Just recently powered up a new M5000 server. Went through the setup process of setting the networking details of the management card - which I believe also works through ethernet0 (LAN#0). That is working just fine and is what I have used to access the system console. Single domain, nothing odd in the configuration.
The pre-installed Solaris sees bge0 and bge1. It also shows the ppp connection for the dscp.
if config shows a normal adapter config but without the RUNNING flag. cfgadm shows the drivers properly loaded. There are cables connected to both NIC cards. The same result, btw, on the bge1 card. The NIC's show activity LED's so there is definitely a physical connection there.
What else can I provide to get assist anyone in helping me solve this problem?
Thanks
Norm Dressler

Hi all, I'm new to the forum
Have installed the above mentioned server running the x86 platform with Solaris 10 1/08 with broadcom ethernet adaptor cards.
My network connections are giving issues. bge0 and bge1both show physical activity and these are my configs
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 192.168.1.170 netmask ffffff00 broadcast 192.168.1.255
ether 0:11:25:22:1f:26
bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 10.0.0.1 netmask ffffff00 broadcast 10.255.255.255
ether 0:11:25:22:1f:27
My default router also exists
# vi /etc/defaultrouter
192.168.1.254
~
The hosts file
# vi /etc/hosts
::1          localhost
127.0.0.1 localhost
192.168.1.170 hostname1      loghost
10.0.0.1      hostname1
~
~
And the device files
# vi /etc/hostname.bge0
hostname1
~
~
# vi /etc/hostname.bge1
hostname2
~
~
All these including restart procedures aren't working.
I dont seem to be able to get to other devices on the network yet the local TCP/IP stack behaves just OK. I can ping all the interfaces but cannot ping any device on the network.
During install too, I attempted to acquire a dhcp address via the network from a dhcp server that serves IPs to our network but failed thus proceeded to static addressing.
Any advice please?

How can I get Recipefox to work with the latest version (16) of Firefox?

Recipefox worked on previous versions of Firefox. I could use the Grab It feature on many sites & easily retrieve recipes. Now, with the latest version of Firefox, it does not work on any of the recipe websites. Is there a more recent version of Recipefox that works with Firefox version 16, I am using 0.68. Does Recipefox get updated with newer versions of Firefox.

Hi,
You can try to right-click and '''Find Updates''' via '''Tools''' ('''Alt''' + '''T''') > '''Add-ons''' > '''Extensions'''. You can also '''Remove''' it, and search and install via the Search box on the top right or from [https://addons.mozilla.org/en-US/ AMO].
[https://support.mozilla.org/en-US/kb/Using%20extensions%20with%20Firefox Using Extensions]
If problems persist you can reset Firefox and start afresh with [https://addons.mozilla.org/en-US/firefox/addon/recipefox/?src=search recipefox].
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

I wanted to watch tv on demands but says this is not HTML5 delivery so how can I get this to work on ipad so I can catch up my tv program any help?

How can I get tv on demands working on my iPad as wanted to watch my program but it says HTML5 not supported on this, so any ideas that can help?

HTML5 is supported on the iPad but I assume that the site that you are going to doesn't yet support it. Does the site have it's own app - here in the UK the TV channels have their own apps, plus there are apps such as TVCatchup.

Can I get my InDesign work to the web or to Dreamweaver?

I am helping a production company with their web sites. At present, a staff member there has created hundreds of pages for print in InDesign. He also went so far as to create how they want the web sites to look and he did all of his work in InDesign. Now, we need to get all of that InDesign work to the web, hopefully without having to create it all again in Dreamweaver.
So, how can I get all of these hundreds of pages that are already done in ID, over to DW without having to recreate them all?
In ID, I DO NOT SEE an export to Dreamweaver like so many forums state.
Also, I do not see a PACKAGE --- Export feature as I saw on another post. So, I must be missing something. I'm working in CS5 Design Premium.
We tried copy and paste and we tried export (that got us the text but nothing else) and we've tried everything else we can think of.
Any ideas? I know lots of people have to have tons of stuff in ID that needs to go to the web after the fact.
A little help here...
Thanks
Cliff

I'd be one of the last people to suggest that it's a good idea to use InDesign for Web design, but if that is where you're starting from, with CS5.5 it isn't entirely hopeless. You can use the Edit All Export Tags command on the paragraph styles fly-out menu to map styles to sensible HTML tags (headings to h1, sub-headings to h2, ...) and add classes where appropriate to hang some styling on. Provided that your documents use a consistent set of styles, you'd then just have to create a single CSS stylesheet that you could use for every HTML document you exported. You could import the mappings into all the documents so you'd only have to do it once.
If the documents don't use styles consistently, of course, your case is hopeless.

HT4929 OS 10.5.8: Can't get mail to work using the recommended icloud settings

Grandma has a G5 imac running 10.5.8 and a .mac account under my master account. Moved her to icloud today, and can login via icloud.com and can see her mail there. Read the article, and using 'Mail' (Vs 3.6)on her mac, deleted her old .mac account, and tried to set up a new account manually, using the settings in the article:   imap.mail.me.com, SSL on, her usual user name, and her password (which, btw, works fine on the icloud.com site)
Also, for outgoing, used smtp.mail.me.com, SSL, etc, etc
Tried it 5 times, doesn't work.
Watched a youtube video, where it worked, followed exactly, didn't work! Help, anyone?   Thanks

I found the answer to this problem on a Nov 2011 posting. Amazing that the current icloud migration notices don't clarify this:
If you were to start a brand new icloud account, they would require at least 8 characters, upper and lower cases, including numbers. If however you are migrating a .mac or .me account to icloud, your old password may not meet those requirements. So, icloud keeps rejecting the attempt to set up an account via the 'Mail' app.
You need to go to   http://appleid.apple.com     to sign in with your old password, then change to one meeting the new requirements. Do not use http://iforgot.apple.com
Thanks to DendeNYC!!!!

I received an Ipad Air 2 on Jan 6 2015. I can't get to come on. The screen is black. Help!

I received an Apple Ipad air 2 on Jan 6, 2015. I cannot get it to come on today. It is fully charged and I only get a black screen. Help!

Had a similar problem with an Air 2. For some reason, the battery had gone to 0 from 50% overnight, locked and idle.
Apparently, plugging it in with a 0 battery takes about 15-20 minutes to get to a point where the screen will show anything (about at the 2% battery level).
I had tried everything else (reset, power off, ...). Be sure you're using an Apple charger and Apple cable and try plugging it in and waiting a while.
It's been OK for the last two weeks.

Helppp just got the creative cloud membership but can't get illustrator to work :/

So i recently purchased the annual student membership for creative cloud as i need it for my uni course, ive downloaded both photoshop and illustrator...photoshop opens and works fine but as soon as illustrator opens i get a error message and it closes itself down this has happend over and over again can someone please HELP!!!???

Hi nikkibaby1988,
Please refer the kb: http://helpx.adobe.com/photoshop/kb/cc-applications-crash-immediately-launch.html.
Regards,
Romit Sinha

I can't get Illustrator to work in the Yosemite Beta. Can anyone help?

Similar Messages

Maybe you are looking for