I can't get internet connection even after wi-fi set is done with cisco

I can't get internet connection even after wi-fi set up is done with cisco

Not sure what Cisco is but if you are having problems with your wifi this link might help
On the iPad...  tap Settings / General / Reset / Reset NetworkSettings.
Or here is a link that might help http://support.apple.com/kb/TS1398

Similar Messages

  • Can't get internet connection via ethernet

    I have had 3 computers, 1 pc and 2 Macs, networked through ethernet for two years. Never had problems until yesterday. We just can't get on the internet on the Macs. Both macs say "Your computer isn't connected." Talked to D-Link router, everything was fine. Macs recognize IP and all numbers, so they told us to call Apple. Any ideas?
    Thanks.

    Possibly:
    reboot the macs.
    check the cables.
    reboot the router.
    reboot the dsl/cable/whatever modem.
    Are you getting a valid Ip ddress from the D-Link (192.168.xx.xx, or is it a 169.xxx.xxx.xxx?)
    In Network utilities, can you ping an outside IP by name? Ping an outside site by IP by number? Ping the router IP? Ping the PC?
    Reset Safari...

  • How can I get internet connectivity with my iPod Touch cabled to my PC?

    Most devices "tether" to a computer (PC or iMac) for internet connection. I cannot find any reference in the user manual on getting internet access from the connected PC to the "tethered" ipod touch. How can I accomplish this?

    Hi,
    The iPhone 3G and iPhone 3GS support Internet tethering over a USB cable, as described here: http://support.apple.com/kb/HT3574.
    The iPod touch can connect over a Wi-Fi network, as mentioned here: http://support.apple.com/kb/HT2031.
    If your PC has a wireless card, you may be able to create an Ad-Hoc Wi-Fi network that can share the Internet access to the iPod touch.
    You can also get a wireless router, like an Airport base station http://www.apple.com/wifi/.
    -Jason

  • Why is my ipad stuck in recovery mode after IOS update?  I can't get it out even after I restore.  Please help!

    I did an IOS update and now my iPad is stuck in recovery mode and I can't get it out.  I have tried to restore through iTunes, but after restore it says it is still in recovery mode.  Please help!

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!

  • How Can I get my contacts back after restore all set

    Hi,
    I need help, I have a blackberry curve 8520 and my all contacts saved in blackberry phone memoey by misake I restore my handset and then I lost my all contacts Is there is any option to get all contants back.
    Thanks in advance

    Hi AyushGab93
    Welcome to BlackBerry Support Forums
    What do you mean by " Restore " hee ? Do you mean you wiped your device ? 
    By default all of our Contacts or Address book is stored in our device memory ! If you have a previous backup of your device or used BlackBerry Protect then you can restore it from there .
    So can you confirm if have any such backups ? If you don't have it then I doubt you'll ever able to recover those.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • After dropping my ipad, I can only get Internet connection if I sit at my router, any suggestions?

    Hi all,
    I have a 32gb ipad 2. I dropped it about half an hour ago. When I sit at my router, I get full bars of connection. Every step I take away from my (BT) router my connection rapidly decreases, until about 3 metres away, the connection cuts out completely. In my settings, my router icon only appears when I'm directly in front of my router. Should I take it to the Genius Bar? Please help! Thanks

    Some iPad users have been able to revive their dropped iPad. Turn the iPad over and give it a HARD SLAP on the back. May take several slaps.
    dropped iPad
    https://discussions.apple.com/thread/4474708?tstart=30
     Cheers, Tom

  • Can't get internet connection

    Instead of shutting my phone off last night I chose sleep mode to see how this would compare.  However once the phone was back on I cannot access any app that requires the internet.  Any thoughts as to how I can fix this?

    Do you have Menu / Settings / battery & data manager / Data Saver <- turned OFF?
    Also, check:
    menu / Settings / battery & data manager / Data Delivery  .. make sure DATA ENABLED is checked, and DATA ROAMING as well

  • Can not get internet connection

    New user to ipad2.  Was connected earlier today but now I am not able to acess email or Internet.

    Read this:
    http://support.apple.com/kb/TS1398

  • TS1398 My week old ipad2 keeps loosing it's internet connection, even though it is still connected to my home wi-fi network. The ipad has to be rebooted to make it work, which it does for awhile, then looses connection again. Resetting the connection does

    My week old ipad2 keeps dropping it's internet connection, even after rebooting the ipad and renewing the wi-fi connection. Gets very frustrating not to have internet in the middle of a task or email.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

    When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

    When two or more devices conflict it typically means that the DHCP service is either misconfigured or is not running at all. DHCP provides IP addresses to local network clients.
    Is your AirPort Express base station the only router in your current network configuration? That is, is it connected directly to an Internet modem and not to another router upstream of it?

  • TS3899 I keep getting " The connection to server failed" but I can get internet connection. Can anyone help please

    I keep getting "The connection to the server has failed" when I call up my mail although I do get internet connection. Can anyone help please.

    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

  • Why can't I get internet connection while I am away from a WiFi connection?

    Why can't I get internet connection while I am away from a WiFi connection?

    Some more information other than why would help. Does your service provider allow cellular data on your plan? Do you have cellular data turned on? Are you in a area with cellular coverage?

  • Why can't i get internet connection on my blu players with my airport express?

    why can't i get internet connection on my blu ray players with airport express?

    Hello there, sheilafromfra.
    The following Knowledge Base offers up some great steps for troubleshooting the Wi-Fi issue on your iPad:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • HT3529 I cannot activate imessage or facetime. I keep getting an error message to check my internet connection even though i am connected to the internet. Help

    I set up my ipad 2 again because it did not recognize my apple id. I chaged my password etc. but now that i have set it up and reloaded all of my apps i cant seem to be able to activate imessage or facetime. I keep getting an error message about my internet connection even though i am online. What do i do?

    http://support.apple.com/kb/TS4268

  • I can't get the connect to work after base installion.

    Hello, everyone, I am new to Arch Linux.
    I follow the installation guide install Arch Linux, Everything run pretty smooth, except at the part when I need to choose the package, I am not so sure what I am doing. So I choose everything except for the thing that I am sure I would never need.
    When the installation is complete, I try to go to the next setup which update my system, but some how, I can't get the connection working, switch mean, I couldn't do anything beyond that. (both wireless and wired network, BTW I am using DSL and I do try the adsl thing)
    Every thing seem make sense to me during the installation, but I just can't get the network connection working.
    BTW: my laptop is a Toshiba portege M100.
    Any idea?
    Thanks
    Last edited by ioky (2008-06-25 06:18:58)

    Try typing in:
    dhcpcd eth0 (or whatever interface you are using)
    and hit enter, I had the same type of problem and this woke up my network connection.
    Edit: Also, once you gain your connection up and running, you might want to install ifplugd.  It is a daemon which will automatically configure your Ethernet device when a cable is plugged in and automatically unconfigure it if the cable is pulled, which is good for laptops.  Once installed make sure you put it in /etc/rc.conf under the DAEMONS section.
    Here is some info in the wiki http://wiki.archlinux.org/index.php/Configuring_network
    Last edited by ArchGentoo (2008-06-26 01:22:45)

Maybe you are looking for

  • Installation of IPC AP 7.0 Jar is getting Failed when uploading in CRM

    Hello Experts, we did some changes in the previosly uploded version of IPC AP 7.0  customer user exit Jar file in eclipse. While uploading the new modified jar through transaction /SAPCND/UE_DEV in CRM we are getting error :" installation of module <

  • Unable to start the server

    Hi All When I am starting up the server form Windows mmc console ,It goes up for while ,and then turns off . First Woker processes in WP table ends and then dispatcher stops .Here is the developer trace for  dispatcher trc file: "dev_disp", trc level

  • Sad iPod

    My iPod Mini seems to be having a lot of issues. The sad iPod screen appears shortly after I turn it on, first going from the Apple logo to that screen, and then shutting off. I tried to reset the iPod as the website suggested, but it did not respond

  • ** PC to Mac OS X Developing

    Hi All I am new to Mac OS I used to develop on a PC I had Internet Information Server, SQL Database and Access Database IDE Visual InterDev. Using ASP and VB, Java to code in. Yes it was some time ago. I used Acces for testing and SQL server for pro

  • Can Forms Builder access non-Oracle Database?

    Does any one know whether Pracle Forms can access othe non-Oracle database via ODBC or JDBC to MS Access or MySQL?