I can't Get Magic Trackpad to Work

I have an unusual setup - any help would be appreciated.
Mac Pro 2,1 (2006), original Vista 64 bit install on HD2 formatted NTFS since upgraded to Windows 7 64 bit. Boot Camp drivers 2.x added after install for Mac peripherals. Keyboard and mice including magic Mouse worked fine.
Windows 7 (64 bit) boots and runs fine in this setup. Mac OS 10.7.x installed on HD1 and 10.6.8 installed in HD3, all boot and run fine.
Apple Magic Trackpad is recognized as a Bluetooth device under Windows 7 but won't pair or function. I have downloaded Windows drivers for the trackpad and extracted them using 7Zip, but they fail to install with a "not supported on this system" message. Similarly, I can't upgrade my Boot Camp drivers from 2.x with an error message (wrong) "a later version of Boot Camp is installed on this system".
Having to use a wired mouse is annoying. Any ideas?

got an imac ran windows 7 64bit ultimate on it
installed the boot camp drivers everything was fine
about a year later I updated to win8 pro not a clean install but an update using the digital version not an
disc version
my magic trackpad still works fine though in windows I have to click it before it wakes and starts to work
in osx it always works

Similar Messages

  • How can I get my trackpad to work with lion

    The only one of my trackpad finger gestures on lion I can get to work is the two finger direction. The three finger swipe between screens will not work at all. I have to use the keyboard.
    Trackpad preferences seem OK, when I first opened Lion the track pad was all over the place, bar the two finger direction, which I like,  now it is dead.
    Any advice would be helpful.,

    My Epson is able to do scans using Image Capture without any problems at all.
    Allan

  • [Solved]I can't get the trackpad to work!

    Hey, I'm having trouble trying to make work the trackpad on my recently adquired 1ghz celeron notebook that my dad replaced for a new one , I tried booting ubuntu to see if linux had any support for it and it workds pretty flawlessy there (but the ubuntu livecd takes around half an hour to boot). I cannot exactly put my xorg.conf because I'm one network cable short of having the both the laptop and my desktop in the lan at the same time, but I'll try my best to provide all the information needed.
    X starts, but the pointer won't go anywhere, when I exit, the error message goes like:
    (EE) Touchpad no synaptics touchpad detected and no repeater device
    (EE) Touchpad Unable to query/initializa Synaptics hardware
    (EE)PreInit failed dor input device "Touchpad"
    and in Xorg.conf I have:
    Section "ServerLayout"
    Identifier "Xorg configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard" "CoreKeyboard"
    InputDevice "PS/2 Mouse" "CorePointer"
    InputDevice "Touchpad" "SendCoreEvents"
    EndSection
    Section "InputDevice"
    Identifier "Touchpad"
    Driver "Synaptics"
    Option "SendCoreEvents" "true"
    Option "Device" "/dev/psaux"
    Option "Protocol" "auto-dev"
    EndSection
    Section "InputDevice"
    Identifier "PS/2 Mouse"
    Option "Protocol" "ExplorerPS/2"
    Option "Device" "/dev/input/mice"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection
    Any ideas on what to do? I already run out of ideas, I don't think messing around with the bios is needed since Ubuntu used it just well, also, by the way, copying ubuntu's xorg on top leads to the exact same result.
    Thanks
    EDIT:
    I also noticed that the there isn't any SynPS/2 Synaptics TouchPad in /proc/bus/input/devices and that X also says
    Touchpad no Synaptics event device found (checked 14 nodes)
    Query no Synaptics: 6003C8
    EDIT
    I was missing the psmouse module, it's working now.
    Last edited by Phrodo_00 (2008-02-17 16:25:08)

    See Help:Template:
    Help:Template wrote:
    Note: If you use the equal sign ( = ) inside a template with numbered parameters, MediaWiki will break the template's output. You need to enclose the equal sign (or the entire block of text) in <nowiki> tags like so:
    {{Codeline|<nowiki>variable = value</nowiki>}}
    Alternatively, treat the parameter number as a named parameter, as in:
    {{Codeline|1=variable = value}}
    This is a technical limitation that you should keep in mind while using templates.

  • I am having trouble getting my Blutooth Magic Trackpad to work in windows 7 running through a bootcamp partition on my 2008 MacPro.  Any ideas?

    I am having trouble getting my Blutooth Magic Trackpad to work in windows 7 running through a bootcamp partition on my 2008 MacPro.  Any ideas?

    I installed the apple drivers and it works though unlike
    in osx where it works from the start in windows I need to click it once before it begin to work

  • Magic trackpad only working with a wet finger.

    Since I cracked open my box I have not been able to get my magic trackpad to work continously.  While I am able to get a bluetooth connection, when I move my finger across it I only sometimes get a response from the mouse.  This becomes only slightly more effective if I lick my finger or cleaned the surface of the trackpad with a slightly damp towel.  Once the surface and/or finger are completely dry again however, the trackpad returns to it's almost zero response.  Is there some film to remove or special cleaning I should be doing when I opened the box?

    I just noticed the same thing = I hadn't used it much but just moved up to Lion and started to and it wouldn't work = but when I read your issue I tried it with a wet finger and it worked.  I can't even read the serial number on it so can't call for help.  Any other suggestions??  I bought it in late April.

  • Can't get direct rendering to work

    On my notebook with an Intel 945GM card, I can't get direct rendering to work.
    I'm using the 'xf86-video-intel' driver.
    /etc/X11/xorg.conf:
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Touchpad" "AlwaysCore SendCoreEvents"
    # InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "ServerFlags"
    Option "DontZap"
    Option "DontZoom"
    EndSection
    Section "Files"
    RgbPath "/usr/share/X11/rgb"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "xtrap"
    Load "extmod"
    Load "GLcore"
    Load "record"
    Load "dbe"
    Load "glx"
    Load "dri"
    Load "freetype"
    Load "synaptics"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbLayout" "us"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "InputDevice"
    Driver "synaptics"
    Identifier "Touchpad"
    Option "Device" "/dev/psaux"
    Option "Protocol" "auto-dev"
    Option "LeftEdge" "1700"
    Option "RightEdge" "5300"
    Option "TopEdge" "1700"
    Option "BottomEdge" "4200"
    Option "FingerLow" "25"
    Option "FingerHigh" "30"
    Option "MaxTapTime" "180"
    Option "MaxTapMove" "220"
    Option "VertScrollDelta" "100"
    Option "MinSpeed" "0.06"
    Option "MaxSpeed" "0.12"
    Option "AccelFactor" "0.0010"
    Option "SHMConfig" "on"
    # Option "Repeater" "/dev/ps2mouse"
    EndSection
    Section "Monitor"
    #DisplaySize 330 210 # mm
    DisplaySize 338 211
    Identifier "Monitor0"
    VendorName "AUO"
    ModelName "2174"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "SWcursor" # [<bool>]
    #Option "ColorKey" # <i>
    #Option "CacheLines" # <i>
    #Option "Dac6Bit" # [<bool>]
    #Option "DRI" # [<bool>]
    #Option "NoDDC" # [<bool>]
    #Option "ShowCache" # [<bool>]
    #Option "XvMCSurfaces" # <i>
    #Option "PageFlip" # [<bool>]
    Identifier "Card0"
    Driver "intel"
    VendorName "Intel Corporation"
    BoardName "Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
    BusID "PCI:0:2:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 8
    Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    And here is /var/log/Xorg.0.log:
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.4.0.90
    Release Date: 5 September 2007
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.24-ARCH i686
    Current Operating System: Linux zg6y3zg9f3x 2.6.24.3-ARCH #2 SMP PREEMPT Sun Mar 2 23:22:11 CET 2008 i686
    Build Date: 03 February 2008 02:54:48PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 3 00:20:16 2008
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Touchpad"
    (**) |-->Input Device "Keyboard0"
    (**) Option "DontZap"
    (**) Option "DontZoom"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
    (==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (**) RgbPath set to "/usr/share/X11/rgb"
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (==) |-->Input Device "Mouse0"
    (==) The core pointer device wasn't specified explicitly in the layout.
    Using the first mouse device.
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) Loader magic: 0x81d65c0
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.3
    X.Org Video Driver: 2.0
    X.Org XInput driver : 2.0
    X.Org Server Extension : 0.3
    X.Org Font Renderer : 0.5
    (II) Loader running on linux
    (II) LoadModule: "pcidata"
    (II) Loading /usr/lib/xorg/modules//libpcidata.so
    (II) Module pcidata: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org Video Driver, version 2.0
    (--) using VT number 7
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 8086,27a0 card 1025,0090 rev 03 class 06,00,00 hdr 00
    (II) PCI: 00:02:0: chip 8086,27a2 card 1025,0090 rev 03 class 03,00,00 hdr 80
    (II) PCI: 00:02:1: chip 8086,27a6 card 1025,0090 rev 03 class 03,80,00 hdr 80
    (II) PCI: 00:1b:0: chip 8086,27d8 card 1025,0090 rev 02 class 04,03,00 hdr 00
    (II) PCI: 00:1c:0: chip 8086,27d0 card 0000,0000 rev 02 class 06,04,00 hdr 81
    (II) PCI: 00:1c:1: chip 8086,27d2 card 0000,0000 rev 02 class 06,04,00 hdr 81
    (II) PCI: 00:1c:2: chip 8086,27d4 card 0000,0000 rev 02 class 06,04,00 hdr 81
    (II) PCI: 00:1c:3: chip 8086,27d6 card 0000,0000 rev 02 class 06,04,00 hdr 81
    (II) PCI: 00:1d:0: chip 8086,27c8 card 1025,0090 rev 02 class 0c,03,00 hdr 80
    (II) PCI: 00:1d:1: chip 8086,27c9 card 1025,0090 rev 02 class 0c,03,00 hdr 00
    (II) PCI: 00:1d:2: chip 8086,27ca card 1025,0090 rev 02 class 0c,03,00 hdr 00
    (II) PCI: 00:1d:3: chip 8086,27cb card 1025,0090 rev 02 class 0c,03,00 hdr 00
    (II) PCI: 00:1d:7: chip 8086,27cc card 1025,0090 rev 02 class 0c,03,20 hdr 00
    (II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev e2 class 06,04,01 hdr 01
    (II) PCI: 00:1f:0: chip 8086,27b9 card 1025,0090 rev 02 class 06,01,00 hdr 80
    (II) PCI: 00:1f:2: chip 8086,27c4 card 1025,0090 rev 02 class 01,01,80 hdr 00
    (II) PCI: 00:1f:3: chip 8086,27da card 1025,0090 rev 02 class 0c,05,00 hdr 00
    (II) PCI: 05:00:0: chip 8086,4222 card 8086,1000 rev 02 class 02,80,00 hdr 00
    (II) PCI: 06:01:0: chip 14e4,170c card 1025,0090 rev 02 class 02,00,00 hdr 00
    (II) PCI: 06:04:0: chip 1524,1412 card 1400,0000 rev 10 class 06,07,00 hdr 82
    (II) PCI: 06:04:1: chip 1524,0530 card 1025,0090 rev 01 class 05,01,00 hdr 80
    (II) PCI: 06:04:2: chip 1524,0550 card 1025,0090 rev 01 class 08,05,01 hdr 80
    (II) PCI: 06:04:3: chip 1524,0520 card 1025,0090 rev 01 class 05,01,00 hdr 80
    (II) PCI: 06:04:4: chip 1524,0551 card 1025,0090 rev 01 class 05,01,00 hdr 80
    (II) PCI: End of PCI scan
    (II) Intel Bridge workaround enabled
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,7), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
    [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) Bus 0 non-prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    (II) Bus 0 prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) PCI-to-PCI bridge:
    (II) Bus 3: bridge is at (0:28:1), (0,3,3), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) PCI-to-PCI bridge:
    (II) Bus 4: bridge is at (0:28:2), (0,4,4), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) PCI-to-PCI bridge:
    (II) Bus 5: bridge is at (0:28:3), (0,5,5), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) Bus 5 non-prefetchable memory range:
    [0] -1 0 0xd0100000 - 0xd01fffff (0x100000) MX[b]
    (II) Subtractive PCI-to-PCI bridge:
    (II) Bus 6: bridge is at (0:30:0), (0,6,7), BCTRL: 0x0000 (VGA_EN is cleared)
    (II) Bus 6 non-prefetchable memory range:
    [0] -1 0 0xd0000000 - 0xd00fffff (0x100000) MX[b]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (II) PCI-to-CardBus bridge:
    (II) Bus 7: bridge is at (6:4:0), (6,7,10), BCTRL: 0x0740 (VGA_EN is cleared)
    (--) PCI:*(0:2:0) Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xd0200000/19, 0xc0000000/28, 0xd0300000/18, I/O @ 0x5088/3
    (--) PCI: (0:2:1) Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xd0280000/19
    (II) Addressable bus resource ranges are
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) OS-reported resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) Active PCI resource ranges:
    [0] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
    [1] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
    [2] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
    [3] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
    [4] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
    [5] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
    [6] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
    [7] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
    [8] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
    [9] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
    [10] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [11] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [12] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [13] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [14] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
    [15] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
    [16] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
    [17] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
    [18] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
    (II) Inactive PCI resource ranges:
    [0] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
    [1] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
    [2] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
    [3] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
    (II) Active PCI resource ranges after removing overlaps:
    [0] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
    [1] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
    [2] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
    [3] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
    [4] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
    [5] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
    [6] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
    [7] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
    [8] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
    [9] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
    [10] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [11] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [12] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [13] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [14] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
    [15] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
    [16] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
    [17] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
    [18] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
    (II) Inactive PCI resource ranges after removing overlaps:
    [0] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
    [1] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
    [2] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
    [3] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
    (II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) All system resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
    [5] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
    [6] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
    [7] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
    [8] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
    [9] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
    [10] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
    [11] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
    [12] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
    [13] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
    [14] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
    [15] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
    [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [18] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
    [19] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
    [20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [24] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
    [25] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
    [26] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
    [27] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
    [28] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) LoadModule: "xtrap"
    (II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
    (II) Module xtrap: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension DEC-XTRAP
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension RECORD
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.4.0.90, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font FreeType
    (II) LoadModule: "synaptics"
    (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 4.3.99.902, module version = 1.0.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 2.2.1
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 2.0
    (II) LoadModule: "synaptics"
    (II) Reloading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.2.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.2.3
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
    965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
    (II) Primary Device is: PCI 00:02:0
    (WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found
    (--) Chipset 945GM found
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
    [5] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
    [6] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
    [7] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
    [8] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
    [9] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
    [10] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
    [11] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
    [12] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
    [13] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
    [14] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
    [15] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
    [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [18] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
    [19] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
    [20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [24] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
    [25] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
    [26] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
    [27] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
    [28] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
    (II) resource ranges after probing:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
    [5] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
    [6] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
    [7] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
    [8] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
    [9] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
    [10] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
    [11] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
    [12] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
    [13] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
    [14] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
    [15] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
    [16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [21] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
    [22] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
    [23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [25] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [26] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [27] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
    [28] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
    [29] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
    [30] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
    [31] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
    [32] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [33] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org Video Driver, version 2.0
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.1.0
    ABI class: X.Org Video Driver, version 2.0
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 0.1.0
    ABI class: X.Org Video Driver, version 2.0
    (**) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
    (--) intel(0): Chipset: "945GM"
    (--) intel(0): Linear framebuffer at 0xC0000000
    (--) intel(0): IO registers at addr 0xD0200000
    (II) intel(0): 2 display pipes available.
    (==) intel(0): Using EXA for acceleration
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"(II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"(II) Module "i2c" already built-in
    (II) intel(0): Output VGA using monitor section Monitor0
    (II) intel(0): I2C bus "CRTDDC_A" initialized.
    (II) intel(0): Output LVDS has no monitor section
    (II) intel(0): I2C bus "LVDSDDC_C" initialized.
    (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
    (II) intel(0): EDID vendor "AUO", prod id 8564
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Reloading /usr/lib/xorg/modules//libint10.so
    (II) intel(0): initializing int10
    (WW) intel(0): Bad V_BIOS checksum
    (II) intel(0): Primary V_BIOS segment is: 0xc000
    (II) intel(0): VESA BIOS detected
    (II) intel(0): VESA VBE Version 3.0
    (II) intel(0): VESA VBE Total Mem: 7872 kB
    (II) intel(0): VESA VBE OEM: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS
    (II) intel(0): VESA VBE OEM Software Rev: 1.0
    (II) intel(0): VESA VBE OEM Vendor: Intel Corporation
    (II) intel(0): VESA VBE OEM Product: Intel(r) 82945GM Chipset Family Graphics Controller
    (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
    (II) intel(0): No SDVO device found on SDVOB
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
    (II) intel(0): No SDVO device found on SDVOC
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
    (II) intel(0): Output TV has no monitor section
    (II) intel(0): EDID vendor "AUO", prod id 8564
    (II) intel(0): Output VGA disconnected
    (II) intel(0): Output LVDS connected
    (II) intel(0): Output TV disconnected
    (II) intel(0): Output LVDS using initial mode 1280x800
    (II) intel(0): Monitoring connected displays enabled
    (II) intel(0): detected 256 kB GTT.
    (II) intel(0): detected 7932 kB stolen memory.
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Will not try to enable page flipping
    (==) intel(0): Triple buffering disabled
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) intel(0): Display dimensions: (338, 211) mm
    (**) intel(0): DPI set to (96, 154)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.3
    (II) Loading sub module "exa"
    (II) LoadModule: "exa"
    (II) Loading /usr/lib/xorg/modules//libexa.so
    (II) Module exa: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 2.2.0
    ABI class: X.Org Video Driver, version 2.0
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
    (II) intel(0): Comparing regs from server start up to After PreInit
    (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
    (WW) intel(0): PP_STATUS before: on, ready, sequencing idle
    (WW) intel(0): PP_STATUS after: on, ready, sequencing on
    (WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x8000085e to 0x800010bb
    (WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00012d2d to 0x00028283
    (WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00009696 to 0x00014141
    (==) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] 0 0 0xd0300000 - 0xd033ffff (0x40000) MS[b]
    [1] 0 0 0xc0000000 - 0xcfffffff (0x10000000) MS[b]
    [2] 0 0 0xd0200000 - 0xd027ffff (0x80000) MS[b]
    [3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [7] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
    [8] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
    [9] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
    [10] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
    [11] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
    [12] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
    [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
    [14] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
    [15] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
    [16] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
    [17] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
    [18] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
    [19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [22] 0 0 0x00005088 - 0x0000508f (0x8) IS[b]
    [23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [24] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [25] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
    [26] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
    [27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [31] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
    [32] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
    [33] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
    [34] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
    [35] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
    [36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [37] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) intel(0): Kernel reported 488960 total, 1 used
    (II) intel(0): I830CheckAvailableMemory: 1955836 kB available
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: Open failed
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: Open failed
    [drm] failed to load kernel module "i915"
    (EE) [drm] drmOpen failed.
    (EE) intel(0): [dri] DRIScreenInit failed. Disabling DRI.
    (==) intel(0): VideoRam: 262144 KB
    (**) intel(0): Framebuffer compression enabled
    (**) intel(0): Tiling enabled
    (II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
    (II) intel(0): Page Flipping disabled
    (==) intel(0): Write-combining range (0xc0000000,0x10000000)
    (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (II) EXA(0): Offscreen pixmap area of 19660800 bytes
    (II) EXA(0): Driver registered support for the following operations:
    (II) Solid
    (II) Copy
    (II) Composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007bf000 (pgoffset 1983)
    (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00c80000 (pgoffset 3200)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
    (II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000007f820000 physical
    (II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000007fe20000 physical
    (II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000007fe21000 physical
    (II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
    (II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000007fe33000 physical
    (II) intel(0): 0x00640000-0x00c7ffff: front buffer (6400 kB)
    (II) intel(0): 0x007bf000: end of stolen memory
    (II) intel(0): 0x00c80000-0x01f3ffff: exa offscreen (19200 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane B is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane A is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) intel(0): Output TV is connected to pipe none
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (II) intel(0): Set up textured video
    (II) intel(0): Set up overlay video
    (II) intel(0): direct rendering: Failed
    (--) RandR disabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension XAccessControlExtension
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension XFree86-Bigfont
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    (II) AIGLX: Screen 0 is not DRI capable
    (II) Loading sub module "GLcore"
    (II) LoadModule: "GLcore"
    (II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
    (II) Module GLcore: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (II) GLX: Initialized MESA-PROXY GL provider for screen 0
    (II) intel(0): Setting screen physical size to 331 x 207
    (II) Synaptics touchpad driver version 0.14.6 (1406)
    (--) Touchpad auto-dev sets device to /dev/input/event5
    (**) Option "Device" "/dev/input/event5"
    (**) Option "SHMConfig" "on"
    (**) Option "LeftEdge" "1700"
    (**) Option "RightEdge" "5300"
    (**) Option "TopEdge" "1700"
    (**) Option "BottomEdge" "4200"
    (**) Option "VertScrollDelta" "100"
    (**) Option "FingerLow" "25"
    (**) Option "FingerHigh" "30"
    (**) Option "MaxTapTime" "180"
    (**) Option "MaxTapMove" "220"
    (--) Touchpad touchpad found
    (**) Touchpad: always reports core events
    (**) Option "CoreKeyboard"
    (**) Keyboard0: always reports core events
    (**) Option "Protocol" "standard"
    (**) Keyboard0: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xorg"
    (**) Keyboard0: XkbRules: "xorg"
    (**) Option "XkbModel" "pc105"
    (**) Keyboard0: XkbModel: "pc105"
    (**) Option "XkbLayout" "us"
    (**) Keyboard0: XkbLayout: "us"
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard0: CustomKeycodes disabled
    (**) Option "Protocol" "auto"
    (**) Mouse0: Device: "/dev/input/mice"
    (**) Mouse0: Protocol: "auto"
    (**) Option "CorePointer"
    (**) Mouse0: always reports core events
    (**) Option "Device" "/dev/input/mice"
    (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
    (**) Option "ZAxisMapping" "4 5 6 7"
    (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
    (**) Mouse0: Buttons: 11
    (**) Mouse0: Sensitivity: 1
    (II) evaluating device (Mouse0)
    (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
    (II) evaluating device (Keyboard0)
    (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    (II) evaluating device (Touchpad)
    (II) XINPUT: Adding extended input device "Touchpad" (type: MOUSE)
    (--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
    (II) Mouse0: ps2EnableDataReporting: succeeded
    (--) Touchpad auto-dev sets device to /dev/input/event5
    (**) Option "Device" "/dev/input/event5"
    (--) Touchpad touchpad found
    Could not init font path element /usr/share/fonts/Type1, removing from list!
    AUDIT: Mon Mar 3 00:21:47 2008: 10765 X: client 7 rejected from local host (uid 1001)
    (II) intel(0): xf86UnbindGARTMemory: unbind key 0
    (II) intel(0): xf86UnbindGARTMemory: unbind key 1
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007bf000 (pgoffset 1983)
    (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00c80000 (pgoffset 3200)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
    (II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000007f820000 physical
    (II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000007fe20000 physical
    (II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000007fe21000 physical
    (II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
    (II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000007fe33000 physical
    (II) intel(0): 0x00640000-0x00c7ffff: front buffer (6400 kB)
    (II) intel(0): 0x007bf000: end of stolen memory
    (II) intel(0): 0x00c80000-0x01f3ffff: exa offscreen (19200 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane B is now disabled and connected to pipe B.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane A is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) intel(0): Output TV is connected to pipe none
    (II) Mouse0: ps2EnableDataReporting: succeeded
    (--) Touchpad auto-dev sets device to /dev/input/event5
    (**) Option "Device" "/dev/input/event5"
    (--) Touchpad touchpad found
    Can anyone help me with this?
    Last edited by bughunter2 (2008-03-03 01:06:30)

    The standard arch kernel includes all the required modules, at most you need to load them explicitly listing them in MODULES in /etc/rc.conf
    You need also the hw specific stuff, that is i915 and intelagp. Check lsmod and see if they are loaded. If they are not, inspect dmesg and see if udev tries to load them and fails for some reason.
    I remember some cases where intelagp and i915 are not loaded by udev in the right order, if this is your case you can try to list them in the right order in MODULES.
    There should be no need to recompile the kernel or to install a particular version of dri (just use the arch packages for mesa, libdrm etc; but I guess you have them already)

  • I just downloaded AOL Desktop 1.7 for Mac and I can't get my email to work. It welcomes me but I know I have new email but it doesn't recognize that I have ANY mail at all. HELPPPPPPPP Please

    i just downloaded AOL Desktop 1.7 for Mac and I can't get my email to work. It welcomes me but I know I have new email but it doesn't recognize that I have ANY mail at all. HELPPPPPPPP Please

    Hey I've been all over and can't get any help. I'm well aware its not an Apple product but its an app for Mac OS so I thought I'd try here. I bought 2 new iMacs yesterday for my parents (5K) and I'm just trying to get them some help as there in their 70's and AOL is all they know.
    But hey thanks for your help,

  • My iPhone is using my work email to sign in to the cloud, but my apple id and password are with my "personal" email address.  I can't get rid of my "work" email address on my iPhone 4S

    My iPhone is using my work email to sign in to the cloud, but my apple id and password are with my "personal" email address.  I can't get rid of my "work" email address on my iPhone 4S

    Hi Sister Kate,
    If you change the Apple ID you are using on an iPhone or other iOS device, there are several places you need to change it on the device. See this article -
    Apple ID: What to do after you change your Apple ID
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

    I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

    Will not work.  To my knowledge, dual converting like that isn't supported.  The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

  • Can't get video chat to work outside of LAN...

    Hello,
    I can't get video chat to work.
    All computers, LAN and WAN are running the latest iChat under 10.4 (including latest updates).
    Within our LAN, via Bonjour, everything is fine.
    I'm now trying to set up an offsite Intel iMac (10.4) and I can't connect via video chat with them.
    I've had this problem in the past and eventually gave up (so much for "it just works" - I've spent the last 10+ years dealing with Macs and Mac-based networking, I can't imagine "my dad" figuring this all out). Trying again with fingers crossed...?
    If someone could help, it'd be much appreciated.
    Thanks,
    Kristin.
    The studio router/firewall is a SonicWall TZ 170 Standard.
    This router has a static IP.
    All suggested ports on the SonicWall are set up correctly to allow in/out from our LAN.
    All computers on the LAN have static IP addresses.
    Quicktime streaming settings set as suggested.
    OS X Firewall on all computers = OFF.
    No iChat add-ons on any computers.
    Internet connection speed = 7404 kb/s
    The offside router/firewall is a LinkSys WRT54G
    This router does not have a static IP.
    DMZ is ON and set to the only computer connected to it.
    Computer has a static IP address.
    Quicktime streaming settings set as suggested.
    OS X Firewall on all computers = OFF.
    No iChat add-ons on computer.
    Internet connection speed = 5116 kb/s
    If any more information is required to help you help me, just let me know!

    Does the TZ170 have UPnP or Port Triggering then ?
    I can not see that it does here
    Opening the ports in the manner listed on that link will only allow one computer (IP) to use the open ports.
    The Linksys is router and you have not mentioned what the modem is doing at that end.
    Why not use UPnP here ? The Linksys does it (on the Administration page)
    Most likely this needs the Respond to Anonymous Pings checked on the Security page.
    9:29 PM Thursday; January 17, 2008

  • My "Hanging with Friends" app keeps crashing whenever I try to open it. I have deleted and re-downloaded the app, restarted my iPhone, and even restored my iPhone all together, and nothing is working. How can I get this app to work again?

    My "Hanging with Friends" app keeps crashing whenever I try to open it. I have deleted and re-downloaded the app, restarted my iPhone, and even restored my iPhone all together, and nothing is working. How can I get this app to work again?

    Can you start Firefox in [[Safe mode]] ?
    You can also do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can initially skip the step to create a new profile, that may not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • After upgrading to Lion can't get Boot Camp to work! Just get "startup dusk cannot be portioned or restored to a single partition"?

    After upgrading to Lion can't get Boot Camp to work! Just get "The startup disk cannot be partitioned or restored to a single partition". Anytone?

    This message, and threads like yours got asked daily for over two years, now it is only a couple times a week!!
    Is it so hard to follow through? you were to have backup already, clones are best, then erase/format and restore.
    Then partition.
    Some have been able to use Disk Utility booted from OS X DVD or another drive, and repair the drive.
    You have to use Boot Camp Assistant (99.9% anyway) to create and achieve a proper Windows Master Boot Record partition.

  • I recently transferred my ipnone service from at&t to another carrier the phone worked fine until i tried to up it with itunes i now have a frozen itunes logo and a plug on the screens my phone is a iphone 3g how can i get my phone to work again?

    my ipone 3g is frozen with aitunes logo and plug after i tried to update it from apple. the phone worked fine even thou i changed carriers from at&t to Simple celleur. How can i get my phone to work?

    As AT&T has not officially unlocked your phone it must have been hacked to use another carrier.  So when you updated it has relocked itself to AT&T. There is no official unlock so this will happen anytime you update.

  • Only one of my earbuds on my bose headphones works with my ipad, iphone and macbook- if I hold them there the right earbud will work, but for the life of me, I can't get them to both work. Why is this? And is Apple doing anything about this?

    Only one of my earbuds on my bose headphones works with my ipad, iphone and macbook- if I hold them there the right earbud will work, but for the life of me, I can't get them to both work. Why is this? And is Apple doing anything about this? While Apple's headphones have (finally) admittedly gotten better of late, I still prefer the much more comfortable headphones & sound quality that Bose makes and that I spent the money for.

    Bose Product Support

  • How can i get my wireless to work on my printer hp officejet pro 8600

    how can i get my wireless to work on my printer hp officejet pro 8600

    You'll get faster help w/this question by posting it in the Wireless forum...here:
    http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/bd-p/Networking
    I am an HP employee.

Maybe you are looking for

  • I have lost my IPOD Toch. What can I do?

    I have lost my ipod touch. what can i do to get it back?

  • Salary payable connection with AP

    Hi, Could anyone please tell me the employee salary payment and account payable connection. Basically what is the flow between these two. Thanks in advance

  • Freeze columns and rows for scrolling in HTML ouput

    Hi everyone! I have an BIP report with a crosstab generating a HTML output and the table tends to get very big in the ouput, both vertical and horizatal wise, and I am looking for a way to freeze the first column when scrolling horizontally and the h

  • Replacing HDD on macbook, don't have original disk.

    I just bought a late 2008 macbook, aluminum unibody.  But, it didnt come with the original disk.  I believe it is currenly running oxs 10.9.1.  I have a retail copy of snow leopard.  but i believe it originally had leopard on it.  From everything I h

  • Can't install adobe flash palyer 11 on none of our computers

    Windows 7 Professional service pack 1 IE9 and some IE10 No current version on this computer Hello Here's the situation. A while back the new version tried to download on my and other computers without success. Due a problem I uninstalled flash player