I can't get Mobile User to work

When I click on Sync Home Now, I get You must have a mobile account to use this feature. To create a mobile account, open system preferences, click account, then click create. IF these items are missing or disabled, see your system administrator.
on the server a have 10.6.2 the firewall is off for troubleshooting purposes. The Home Folder is created. The Mobility settings are created for the computer and the user. In he login window, the client has a green dot next to Network Accounts Available.
I have tried with a local home directory on both the server and the MacBook Pro and with no local home on the MacBook Pro.
AFP, iCal, and Address Book are all working and running. Open Dir in the Server Admin says that LDAP, Password Server and Kerberos are running.
Where did I go wrong?
If I need to post more info let me know...

I have Windows 8

Similar Messages

  • How can I get multiple users to be able to share the music on iTunes? I've tried Home Sharing, but it does not work properly.

    How can I get home sharing to work on my mac mini for multiple users? It says it is working, but it never shows up in the left hand column.

    Gino Cerullo,
    Thanks for your response. I tried all that myself. In fact, last night, it all worked fine on all users. This morning, no Home Sharing would show up. It is really weird because some setting must have changed, but I did not knowingly changed anything, and now all the obvious fixes don't work. In fact, if I turn off Home Sharing and turn it back on, then it comes up only until I hit the "done" button on the set up page and then it goes away from the left hand column again. The ADVANCED drop down tab says it is on, but it is not there.
    Thanks anyway.
    Edzell

  • I am a new ipod touch user; have gone through all the dowload/install stuff, plugged the device into my computer but ipod screen still shows plug in to tunes.  I am totally computer useless - how can I get my ipod to work, please?  Charles Jones.

    I am a new ipod touch user; have gone through all the dowload/install stuff, plugged the device into my computer but ipod screen still shows plug in to tunes.  I am totally computer useless - how can I get my ipod to work, please?  Charles Jones.

    You did install the latest iTunes (10.5) right?  If the problem was that iTunes does not see the iPod try:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • How can i get ical invitations to work with outlook users?

    how can i get ical invitations to work with outlook users?
    I can send ical meeting invitations but outlook users are having problems having the meeting show up in their calendar….

    My Epson is able to do scans using Image Capture without any problems at all.
    Allan

  • I disconnected my Ipod classic from a receiver in "user" mode and now I can't get the Ipod to work via USB in my car or receiver. HELP!!

    I disconnected my Ipod classic from a receiver in "user" mode and now I can't get the Ipod to work via USB in my car or receiver. HELP!!

    See the following for how much you will have to pay for the exchange.
    Apple - Support - iPod - Repair pricing

  • How can I get all users associated with my VSO

    I see here: https://www.visualstudio.com/en-us/integrate/api/shared/profiles that I can get my profile info from the API, but can I get all users associated with an account?

    Hello!
    If you want to see all of that in a single mailbox, you can create a Smart Mailbox from the "file" menu in the top left corner of your screen. It's a bit of trial and error before you get the rules correct, perhaps, but that will work.

  • Can't get direct rendering to work

    On my notebook with an Intel 945GM card, I can't get direct rendering to work.
    I'm using the 'xf86-video-intel' driver.
    /etc/X11/xorg.conf:
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Touchpad" "AlwaysCore SendCoreEvents"
    # InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "ServerFlags"
    Option "DontZap"
    Option "DontZoom"
    EndSection
    Section "Files"
    RgbPath "/usr/share/X11/rgb"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "xtrap"
    Load "extmod"
    Load "GLcore"
    Load "record"
    Load "dbe"
    Load "glx"
    Load "dri"
    Load "freetype"
    Load "synaptics"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbLayout" "us"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "InputDevice"
    Driver "synaptics"
    Identifier "Touchpad"
    Option "Device" "/dev/psaux"
    Option "Protocol" "auto-dev"
    Option "LeftEdge" "1700"
    Option "RightEdge" "5300"
    Option "TopEdge" "1700"
    Option "BottomEdge" "4200"
    Option "FingerLow" "25"
    Option "FingerHigh" "30"
    Option "MaxTapTime" "180"
    Option "MaxTapMove" "220"
    Option "VertScrollDelta" "100"
    Option "MinSpeed" "0.06"
    Option "MaxSpeed" "0.12"
    Option "AccelFactor" "0.0010"
    Option "SHMConfig" "on"
    # Option "Repeater" "/dev/ps2mouse"
    EndSection
    Section "Monitor"
    #DisplaySize 330 210 # mm
    DisplaySize 338 211
    Identifier "Monitor0"
    VendorName "AUO"
    ModelName "2174"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "SWcursor" # [<bool>]
    #Option "ColorKey" # <i>
    #Option "CacheLines" # <i>
    #Option "Dac6Bit" # [<bool>]
    #Option "DRI" # [<bool>]
    #Option "NoDDC" # [<bool>]
    #Option "ShowCache" # [<bool>]
    #Option "XvMCSurfaces" # <i>
    #Option "PageFlip" # [<bool>]
    Identifier "Card0"
    Driver "intel"
    VendorName "Intel Corporation"
    BoardName "Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
    BusID "PCI:0:2:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 8
    Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    And here is /var/log/Xorg.0.log:
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.4.0.90
    Release Date: 5 September 2007
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.24-ARCH i686
    Current Operating System: Linux zg6y3zg9f3x 2.6.24.3-ARCH #2 SMP PREEMPT Sun Mar 2 23:22:11 CET 2008 i686
    Build Date: 03 February 2008 02:54:48PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 3 00:20:16 2008
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Touchpad"
    (**) |-->Input Device "Keyboard0"
    (**) Option "DontZap"
    (**) Option "DontZoom"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
    (==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (**) RgbPath set to "/usr/share/X11/rgb"
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (==) |-->Input Device "Mouse0"
    (==) The core pointer device wasn't specified explicitly in the layout.
    Using the first mouse device.
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) Loader magic: 0x81d65c0
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.3
    X.Org Video Driver: 2.0
    X.Org XInput driver : 2.0
    X.Org Server Extension : 0.3
    X.Org Font Renderer : 0.5
    (II) Loader running on linux
    (II) LoadModule: "pcidata"
    (II) Loading /usr/lib/xorg/modules//libpcidata.so
    (II) Module pcidata: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org Video Driver, version 2.0
    (--) using VT number 7
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 8086,27a0 card 1025,0090 rev 03 class 06,00,00 hdr 00
    (II) PCI: 00:02:0: chip 8086,27a2 card 1025,0090 rev 03 class 03,00,00 hdr 80
    (II) PCI: 00:02:1: chip 8086,27a6 card 1025,0090 rev 03 class 03,80,00 hdr 80
    (II) PCI: 00:1b:0: chip 8086,27d8 card 1025,0090 rev 02 class 04,03,00 hdr 00
    (II) PCI: 00:1c:0: chip 8086,27d0 card 0000,0000 rev 02 class 06,04,00 hdr 81
    (II) PCI: 00:1c:1: chip 8086,27d2 card 0000,0000 rev 02 class 06,04,00 hdr 81
    (II) PCI: 00:1c:2: chip 8086,27d4 card 0000,0000 rev 02 class 06,04,00 hdr 81
    (II) PCI: 00:1c:3: chip 8086,27d6 card 0000,0000 rev 02 class 06,04,00 hdr 81
    (II) PCI: 00:1d:0: chip 8086,27c8 card 1025,0090 rev 02 class 0c,03,00 hdr 80
    (II) PCI: 00:1d:1: chip 8086,27c9 card 1025,0090 rev 02 class 0c,03,00 hdr 00
    (II) PCI: 00:1d:2: chip 8086,27ca card 1025,0090 rev 02 class 0c,03,00 hdr 00
    (II) PCI: 00:1d:3: chip 8086,27cb card 1025,0090 rev 02 class 0c,03,00 hdr 00
    (II) PCI: 00:1d:7: chip 8086,27cc card 1025,0090 rev 02 class 0c,03,20 hdr 00
    (II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev e2 class 06,04,01 hdr 01
    (II) PCI: 00:1f:0: chip 8086,27b9 card 1025,0090 rev 02 class 06,01,00 hdr 80
    (II) PCI: 00:1f:2: chip 8086,27c4 card 1025,0090 rev 02 class 01,01,80 hdr 00
    (II) PCI: 00:1f:3: chip 8086,27da card 1025,0090 rev 02 class 0c,05,00 hdr 00
    (II) PCI: 05:00:0: chip 8086,4222 card 8086,1000 rev 02 class 02,80,00 hdr 00
    (II) PCI: 06:01:0: chip 14e4,170c card 1025,0090 rev 02 class 02,00,00 hdr 00
    (II) PCI: 06:04:0: chip 1524,1412 card 1400,0000 rev 10 class 06,07,00 hdr 82
    (II) PCI: 06:04:1: chip 1524,0530 card 1025,0090 rev 01 class 05,01,00 hdr 80
    (II) PCI: 06:04:2: chip 1524,0550 card 1025,0090 rev 01 class 08,05,01 hdr 80
    (II) PCI: 06:04:3: chip 1524,0520 card 1025,0090 rev 01 class 05,01,00 hdr 80
    (II) PCI: 06:04:4: chip 1524,0551 card 1025,0090 rev 01 class 05,01,00 hdr 80
    (II) PCI: End of PCI scan
    (II) Intel Bridge workaround enabled
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,7), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
    [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) Bus 0 non-prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    (II) Bus 0 prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) PCI-to-PCI bridge:
    (II) Bus 3: bridge is at (0:28:1), (0,3,3), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) PCI-to-PCI bridge:
    (II) Bus 4: bridge is at (0:28:2), (0,4,4), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) PCI-to-PCI bridge:
    (II) Bus 5: bridge is at (0:28:3), (0,5,5), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) Bus 5 non-prefetchable memory range:
    [0] -1 0 0xd0100000 - 0xd01fffff (0x100000) MX[b]
    (II) Subtractive PCI-to-PCI bridge:
    (II) Bus 6: bridge is at (0:30:0), (0,6,7), BCTRL: 0x0000 (VGA_EN is cleared)
    (II) Bus 6 non-prefetchable memory range:
    [0] -1 0 0xd0000000 - 0xd00fffff (0x100000) MX[b]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (II) PCI-to-CardBus bridge:
    (II) Bus 7: bridge is at (6:4:0), (6,7,10), BCTRL: 0x0740 (VGA_EN is cleared)
    (--) PCI:*(0:2:0) Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xd0200000/19, 0xc0000000/28, 0xd0300000/18, I/O @ 0x5088/3
    (--) PCI: (0:2:1) Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xd0280000/19
    (II) Addressable bus resource ranges are
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) OS-reported resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) Active PCI resource ranges:
    [0] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
    [1] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
    [2] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
    [3] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
    [4] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
    [5] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
    [6] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
    [7] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
    [8] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
    [9] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
    [10] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [11] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [12] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [13] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [14] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
    [15] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
    [16] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
    [17] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
    [18] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
    (II) Inactive PCI resource ranges:
    [0] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
    [1] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
    [2] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
    [3] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
    (II) Active PCI resource ranges after removing overlaps:
    [0] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
    [1] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
    [2] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
    [3] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
    [4] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
    [5] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
    [6] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
    [7] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
    [8] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
    [9] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
    [10] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [11] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [12] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [13] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [14] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
    [15] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
    [16] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
    [17] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
    [18] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
    (II) Inactive PCI resource ranges after removing overlaps:
    [0] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
    [1] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
    [2] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
    [3] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
    (II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) All system resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
    [5] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
    [6] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
    [7] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
    [8] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
    [9] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
    [10] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
    [11] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
    [12] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
    [13] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
    [14] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
    [15] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
    [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [18] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
    [19] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
    [20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [24] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
    [25] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
    [26] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
    [27] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
    [28] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) LoadModule: "xtrap"
    (II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
    (II) Module xtrap: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension DEC-XTRAP
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension RECORD
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.4.0.90, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font FreeType
    (II) LoadModule: "synaptics"
    (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 4.3.99.902, module version = 1.0.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 2.2.1
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 2.0
    (II) LoadModule: "synaptics"
    (II) Reloading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.2.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.2.3
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
    965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
    (II) Primary Device is: PCI 00:02:0
    (WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found
    (--) Chipset 945GM found
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
    [5] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
    [6] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
    [7] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
    [8] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
    [9] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
    [10] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
    [11] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
    [12] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
    [13] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
    [14] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
    [15] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
    [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [18] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
    [19] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
    [20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [24] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
    [25] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
    [26] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
    [27] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
    [28] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
    (II) resource ranges after probing:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
    [5] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
    [6] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
    [7] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
    [8] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
    [9] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
    [10] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
    [11] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
    [12] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
    [13] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
    [14] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
    [15] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
    [16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [21] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
    [22] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
    [23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [25] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [26] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [27] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
    [28] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
    [29] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
    [30] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
    [31] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
    [32] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [33] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org Video Driver, version 2.0
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.1.0
    ABI class: X.Org Video Driver, version 2.0
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 0.1.0
    ABI class: X.Org Video Driver, version 2.0
    (**) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
    (--) intel(0): Chipset: "945GM"
    (--) intel(0): Linear framebuffer at 0xC0000000
    (--) intel(0): IO registers at addr 0xD0200000
    (II) intel(0): 2 display pipes available.
    (==) intel(0): Using EXA for acceleration
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"(II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"(II) Module "i2c" already built-in
    (II) intel(0): Output VGA using monitor section Monitor0
    (II) intel(0): I2C bus "CRTDDC_A" initialized.
    (II) intel(0): Output LVDS has no monitor section
    (II) intel(0): I2C bus "LVDSDDC_C" initialized.
    (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
    (II) intel(0): EDID vendor "AUO", prod id 8564
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Reloading /usr/lib/xorg/modules//libint10.so
    (II) intel(0): initializing int10
    (WW) intel(0): Bad V_BIOS checksum
    (II) intel(0): Primary V_BIOS segment is: 0xc000
    (II) intel(0): VESA BIOS detected
    (II) intel(0): VESA VBE Version 3.0
    (II) intel(0): VESA VBE Total Mem: 7872 kB
    (II) intel(0): VESA VBE OEM: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS
    (II) intel(0): VESA VBE OEM Software Rev: 1.0
    (II) intel(0): VESA VBE OEM Vendor: Intel Corporation
    (II) intel(0): VESA VBE OEM Product: Intel(r) 82945GM Chipset Family Graphics Controller
    (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
    (II) intel(0): No SDVO device found on SDVOB
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
    (II) intel(0): No SDVO device found on SDVOC
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
    (II) intel(0): Output TV has no monitor section
    (II) intel(0): EDID vendor "AUO", prod id 8564
    (II) intel(0): Output VGA disconnected
    (II) intel(0): Output LVDS connected
    (II) intel(0): Output TV disconnected
    (II) intel(0): Output LVDS using initial mode 1280x800
    (II) intel(0): Monitoring connected displays enabled
    (II) intel(0): detected 256 kB GTT.
    (II) intel(0): detected 7932 kB stolen memory.
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Will not try to enable page flipping
    (==) intel(0): Triple buffering disabled
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) intel(0): Display dimensions: (338, 211) mm
    (**) intel(0): DPI set to (96, 154)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.3
    (II) Loading sub module "exa"
    (II) LoadModule: "exa"
    (II) Loading /usr/lib/xorg/modules//libexa.so
    (II) Module exa: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 2.2.0
    ABI class: X.Org Video Driver, version 2.0
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
    (II) intel(0): Comparing regs from server start up to After PreInit
    (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
    (WW) intel(0): PP_STATUS before: on, ready, sequencing idle
    (WW) intel(0): PP_STATUS after: on, ready, sequencing on
    (WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x8000085e to 0x800010bb
    (WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00012d2d to 0x00028283
    (WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00009696 to 0x00014141
    (==) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] 0 0 0xd0300000 - 0xd033ffff (0x40000) MS[b]
    [1] 0 0 0xc0000000 - 0xcfffffff (0x10000000) MS[b]
    [2] 0 0 0xd0200000 - 0xd027ffff (0x80000) MS[b]
    [3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [7] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
    [8] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
    [9] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
    [10] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
    [11] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
    [12] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
    [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
    [14] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
    [15] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
    [16] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
    [17] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
    [18] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
    [19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [22] 0 0 0x00005088 - 0x0000508f (0x8) IS[b]
    [23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [24] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [25] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
    [26] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
    [27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [31] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
    [32] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
    [33] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
    [34] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
    [35] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
    [36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [37] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) intel(0): Kernel reported 488960 total, 1 used
    (II) intel(0): I830CheckAvailableMemory: 1955836 kB available
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: Open failed
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: Open failed
    [drm] failed to load kernel module "i915"
    (EE) [drm] drmOpen failed.
    (EE) intel(0): [dri] DRIScreenInit failed. Disabling DRI.
    (==) intel(0): VideoRam: 262144 KB
    (**) intel(0): Framebuffer compression enabled
    (**) intel(0): Tiling enabled
    (II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
    (II) intel(0): Page Flipping disabled
    (==) intel(0): Write-combining range (0xc0000000,0x10000000)
    (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (II) EXA(0): Offscreen pixmap area of 19660800 bytes
    (II) EXA(0): Driver registered support for the following operations:
    (II) Solid
    (II) Copy
    (II) Composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007bf000 (pgoffset 1983)
    (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00c80000 (pgoffset 3200)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
    (II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000007f820000 physical
    (II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000007fe20000 physical
    (II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000007fe21000 physical
    (II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
    (II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000007fe33000 physical
    (II) intel(0): 0x00640000-0x00c7ffff: front buffer (6400 kB)
    (II) intel(0): 0x007bf000: end of stolen memory
    (II) intel(0): 0x00c80000-0x01f3ffff: exa offscreen (19200 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane B is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane A is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) intel(0): Output TV is connected to pipe none
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (II) intel(0): Set up textured video
    (II) intel(0): Set up overlay video
    (II) intel(0): direct rendering: Failed
    (--) RandR disabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension XAccessControlExtension
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension XFree86-Bigfont
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    (II) AIGLX: Screen 0 is not DRI capable
    (II) Loading sub module "GLcore"
    (II) LoadModule: "GLcore"
    (II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
    (II) Module GLcore: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (II) GLX: Initialized MESA-PROXY GL provider for screen 0
    (II) intel(0): Setting screen physical size to 331 x 207
    (II) Synaptics touchpad driver version 0.14.6 (1406)
    (--) Touchpad auto-dev sets device to /dev/input/event5
    (**) Option "Device" "/dev/input/event5"
    (**) Option "SHMConfig" "on"
    (**) Option "LeftEdge" "1700"
    (**) Option "RightEdge" "5300"
    (**) Option "TopEdge" "1700"
    (**) Option "BottomEdge" "4200"
    (**) Option "VertScrollDelta" "100"
    (**) Option "FingerLow" "25"
    (**) Option "FingerHigh" "30"
    (**) Option "MaxTapTime" "180"
    (**) Option "MaxTapMove" "220"
    (--) Touchpad touchpad found
    (**) Touchpad: always reports core events
    (**) Option "CoreKeyboard"
    (**) Keyboard0: always reports core events
    (**) Option "Protocol" "standard"
    (**) Keyboard0: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xorg"
    (**) Keyboard0: XkbRules: "xorg"
    (**) Option "XkbModel" "pc105"
    (**) Keyboard0: XkbModel: "pc105"
    (**) Option "XkbLayout" "us"
    (**) Keyboard0: XkbLayout: "us"
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard0: CustomKeycodes disabled
    (**) Option "Protocol" "auto"
    (**) Mouse0: Device: "/dev/input/mice"
    (**) Mouse0: Protocol: "auto"
    (**) Option "CorePointer"
    (**) Mouse0: always reports core events
    (**) Option "Device" "/dev/input/mice"
    (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
    (**) Option "ZAxisMapping" "4 5 6 7"
    (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
    (**) Mouse0: Buttons: 11
    (**) Mouse0: Sensitivity: 1
    (II) evaluating device (Mouse0)
    (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
    (II) evaluating device (Keyboard0)
    (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    (II) evaluating device (Touchpad)
    (II) XINPUT: Adding extended input device "Touchpad" (type: MOUSE)
    (--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
    (II) Mouse0: ps2EnableDataReporting: succeeded
    (--) Touchpad auto-dev sets device to /dev/input/event5
    (**) Option "Device" "/dev/input/event5"
    (--) Touchpad touchpad found
    Could not init font path element /usr/share/fonts/Type1, removing from list!
    AUDIT: Mon Mar 3 00:21:47 2008: 10765 X: client 7 rejected from local host (uid 1001)
    (II) intel(0): xf86UnbindGARTMemory: unbind key 0
    (II) intel(0): xf86UnbindGARTMemory: unbind key 1
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007bf000 (pgoffset 1983)
    (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00c80000 (pgoffset 3200)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
    (II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000007f820000 physical
    (II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000007fe20000 physical
    (II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000007fe21000 physical
    (II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
    (II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000007fe33000 physical
    (II) intel(0): 0x00640000-0x00c7ffff: front buffer (6400 kB)
    (II) intel(0): 0x007bf000: end of stolen memory
    (II) intel(0): 0x00c80000-0x01f3ffff: exa offscreen (19200 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane B is now disabled and connected to pipe B.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane A is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) intel(0): Output TV is connected to pipe none
    (II) Mouse0: ps2EnableDataReporting: succeeded
    (--) Touchpad auto-dev sets device to /dev/input/event5
    (**) Option "Device" "/dev/input/event5"
    (--) Touchpad touchpad found
    Can anyone help me with this?
    Last edited by bughunter2 (2008-03-03 01:06:30)

    The standard arch kernel includes all the required modules, at most you need to load them explicitly listing them in MODULES in /etc/rc.conf
    You need also the hw specific stuff, that is i915 and intelagp. Check lsmod and see if they are loaded. If they are not, inspect dmesg and see if udev tries to load them and fails for some reason.
    I remember some cases where intelagp and i915 are not loaded by udev in the right order, if this is your case you can try to list them in the right order in MODULES.
    There should be no need to recompile the kernel or to install a particular version of dri (just use the arch packages for mesa, libdrm etc; but I guess you have them already)

  • How can I get my ipod to work with itunes?

    When I connect my ipod classic into my new computer it seems that itunes does not recognize it. How can I get my ipod to work with itunes? I'm afraid to disconnect my ipod because the display is saying Do Not Disconnect.

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4 Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
    7. Check for third-party software conflicts.
    <Link Edited By Host>

  • Updated to IOS 5.0.1 and now if I tap on a game icon instead of opening the game a grayish color comes over it and nothing happens. How can I get my games to work again?

    Updated to IOS 5.0.1 and now if I tap on a game icon instead of opening the game a grayish color comes over it and nothing happens. How can I get my games to work again?

    Purplehiddledog wrote:
    I do backup with iCloud.  I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud. 
    I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
    I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever.  Is that right?
    In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
    If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

  • Can't get completion insight to work

    Hi all,
    I just can't get completion insight to work on the newer releases of sqldeveloper. It works fine until Version 1.5.5 Build MAIN-5969. However on both Version 2.1.0.62 Build MAIN-62.61 and Version 2.1.0.63 Build MAIN-63.73 it justn't work no matter what settings I use.
    I have run both the builds from \sqldeveloper\bin\sqldeveloper.exe and no exceptions are reported.
    This is the console output from 2.1.0.63
    Finished parsing = 16
    UsersCache.fillIn() time = 2015 ret==null?: false
    Finished parsing = 0
    Finished parsing = 0
    Finished parsing = 0
    Finished parsing = 0
    *...?aux t2?, parse time = 172
    Finished parsing = 0
    Finished parsing = 0
    InsightableOracleDatabase.fetch() time = 2609
    select 'TABLE' type, user owner, name object_name, null column_name, null column
    id, null datatype FROM sys.obj$ o
    where o.owner# = 173
    and o.name not like 'BIN%'
    and o.type# = 2
    and rownum <=50
    union all
    select 'VIEW' type, user owner, name object_name, null column_name, null column_
    id, null data_type FROM sys.obj$ o
    where o.owner# = 173
    and o.name not like 'BIN%'
    and o.type# = 4
    and rownum <=50
    Code completion time = 3516
    Finished parsing = 0
    *...?aux tok2?, parse time = 31
    Finished parsing = 0
    Finished parsing = 0
    Finished parsing = 0
    Finished parsing = 0
    Finished parsing = 0
    Finished parsing = 0
    InsightableOracleDatabase.fetch() time = 38828
    select 'TABLE' type, ''||o.owner# owner, name object_name, null column_name, nul
    l column_id, null data_type FROM sys.obj$ o
    where o.name not like 'BIN%'
    and o.type# = 2
    and rownum <=50
    and name like ?
    union all
    select 'VIEW' type, ''||o.owner# owner, name object_name, null column_name, null
    column_id, null data_type FROM sys.obj$ o
    where o.name not like 'BIN%'
    and o.type# = 4
    and rownum <=50
    and name like ?
    union all
    select 'TABLE' type, user owner, synonym_name object_name, null column_name, nul
    l column_id, null data_type
    from all_synonyms
    where synonym_name like ?
    and rownum <=50
    and owner in (user,'PUBLIC')
    AP_I%
    AP_I%
    AP_I%
    Code completion time = 38984
    Any help to get this working would be much appreciated.
    Thanks

    This console output says that the completion insight queries are executing - the first example took ~ 3.5 seconds and the second example took ~ 39 seconds. Unfortunately, it doesn't tell you how many records it returned.
    If you copy the queries out of the console output and run them manually, do you get any results? For example, the second query would be:
    select 'TABLE' type, ''||o.owner# owner, name object_name, null column_name, null column_id, null data_type
    FROM sys.obj$ o
    where o.name not like 'BIN%'
    and o.type# = 2
    and rownum <=50
    and name like 'AP_I%'
    union all
    select 'VIEW' type, ''||o.owner# owner, name object_name, null column_name, null column_id, null data_type
    FROM sys.obj$ o
    where o.name not like 'BIN%'
    and o.type# = 4
    and rownum <=50
    and name like 'AP_I%'
    union all
    select 'TABLE' type, user owner, synonym_name object_name, null column_name, null column_id, null data_type
    from all_synonyms
    where synonym_name like 'AP_I%'
    and rownum <=50
    and owner in (user,'PUBLIC')theFurryOne

  • Can't get cell borders to work

    I'm new Mac user...and I'm having a terrible time working with some spreadsheets that I created in Excel and saved as .numbers docs.
    My current problem is: I can't get cell borders to work. I had an existing Excel spreadsheet and when I saved it as a num.doc, I lost my column headers. I selected table columns for 3 columns. When I did this I lost the existing cell borders. Now when I try to put them back, they appear while I am in the selected rows, so it looks like it worked, but then when I click another cell, the borders all disappear.
    Can anyone help me out?
    Right now I really miss my PC
    People keep telling me I'll love my MAC one day, but I'm still waiting...

    Microsoft Office is available for Macs. That might be one solution to your problem and might make this switch from PC to Mac a little easier for you.
    Conversions from one format to another are often not perfect. Numbers and Excel are sufficiently different that you might spend considerable time redesigning an imported Excel spreadsheet to make it look and print as you would like it to in Numbers. With regards to borders, it is possible you are not following the proper steps to create borders. There is definitely a learning curve going from Excel to Numbers. Have you downloaded and read the Numbers Users Manual that is available in the Help menu?

  • Can't get my FaceTime to work

    Can't get my FaceTime to work on my phone or iPad. Need to FaceTime uk and it's not working. Any help please?????
    Thanks

    Judging by all the posts on the forum, there seems to be an issue at Apple's end, although they have made no announcement on their status page. Some users have reported that Apple is aware of the issue. You can leave feedback for Apple at the link below.
    http://www.apple.com/feedback/

  • How can i get fallout 2 to work

    How can I get Fallout 2 to work on my mac book pro.  I just got my computer and the graphics are all messed up.  I tryed installing it on a friends computer and it worked.  He has a mac book pro that is only about 8 months old.  Why wont it work on mine?

    Ask your fellow MBP owners -
    MacBook Pro
    http://www.apple.com/support/macbookpro
    I hope none of you are getting it off torrents, always trouble in that dept.
    Maybe it needs a patch for yours and ATI 6xxxx mobility.
    It helps to know the specs, and model number (17"? etc)
    http://support.apple.com/specs/#macbookpro
    Graphics and video support
    AMD Radeon HD 6490M graphics processor with 256MB of GDDR5 memory on 2.0GHz configuration; or AMD Radeon HD 6750M graphics processor with 1GB of GDDR5 memory on 2.2GHz configuration
    Intel HD Graphics 3000 with 384MB of DDR3 SDRAM shared with main memory5
    Automatic graphics switching
    Dual display and video mirroring: Simultaneously supports full native resolution on the built-in display and up to 2560 by 1600 pixels on an external display, both at millions of colors
    so it could be getting messed up with using the Intel graphics - for all I don't know -  or you have 6490M with just 256MB

  • How can i get the SSO to work successfully?

    How can i get the SSO to work successfully?  I followed the note for configuring infoview with ad sso using kerveros & .net.
    Adding the AD group into the win ad authentication configuration page creates the user group but the members of the group aren't being pulled in when I go to the group and select / query the users tab

    Bart,
    By default the setting for update options on the Windows AD tab of authentication does not actually create the aliases until the user attempts to login the first time. We set it this way to prevent a huge group of alias's being created when the administrator sets up Windows AD and also so that only user aliases for users actually using the system get created.  You can change this behaviour though if you like.  Simply change the radio button option to 'New Aliases will be added and new users will be created' this will create the accounts for you when you hit the update button.  If you have a large group your adding I would wait until and afterhours time when you have less activity as this will impact CMS performance while it creates all the accounts.

  • I can't get my ichat to work.

    i can't get my ichat to work. I made an aol login but it says my password is incorrect, which i know it is not. I have a MobileMe but i can't remember the password to that. Every time I try to change my password it just changes my msn address on apple id. I have ox s lion operating system but, I couln't get the ichat to work before that either. I can use facetime tho.

    HI,
    If you created an AIM Name here then can you now Login Here > https://settings.aim.com/
    AIM allow some other characters that alphanumeric ones but these are limited to ! @ # and the . (full stop/dot)
    Is it possible that you have used other characters in the password ?
    If you created an AOL Login have you used the full name ([email protected]) in the name in iChat ?
    AIM never tell you directly that it is the Password.
    You can get to infer it is the password when compared to other messages but it does normally refer to  "Name or Password".  (I just want to check that is what you are seeing)
    MobileMe Name
    Checking your Own Computer
    Open Keychain Access in the Applications/Utilities folder
    Have the Login item to left highlighted
    Have the Passwords items listed if using lion lower left
    Check the list on the right for your MobileMe name.  It may possibly listed with an Cloud icon or the "A" created by ther pen brush and ruler icon.
    It may also get listed twice or more if you have tried different passwords and asked for them to be saved.
    Double click one.
    In the new Panel that open change to the Access tab and check iChat is in the list if using Allow Specific items.
    Return to the Attributes tab
    Tick the Show Password box  (Dialogue biox appears needing your Mac User Password and to Allow Once
    If this password is correct then delete any other entries.
    If incorrect then check others and edit one if required.
    (I am hoping you will see one you recognise)
    The iForgot site can be used to change the password.
    It requires you have access to the linked email you used.
    Or that you remember the security questions that you gave for the MobileMe name.
    (Presumably you know your Date of Birth which you also get asked. )
    10:03 PM      Saturday; January 21, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

Maybe you are looking for

  • Message Data Type mapping

    Hello there,   My scenario is SOAP-XI-SOAP.  After doing configuration, I was alble to send the message to server.  However, I was not able retrieve data at return.   The following are two xml message that I got from server response and from XI. 1. F

  • Yosemite Won't Install (EtreCheck results)

    I have attempted to download and install Yosemite on my Early 2013 MacBook Pro. It gets most of the way through the installation and then just stops. Nothing. For hours. I had to restore my hard drive from a SuperDuper backup. I've run EtreCheck and

  • What is the use of guid in CRM?

    Hi , what is the use of guid in crm. there is nothing like this in r/3.if the data is to flow in from r/3 to crm or crm - r/3 is do we verify the guid.partner guid or product guid. please make me understand this. thank you, hun

  • Data uload to ODS ending up with an error. URGENT HELP NEEDED!!!!!!

    Hi My Sceniro is Full load from ODS1 to 5 other ODS. Iam uploading the data to other 5 ODS by selecting 1 ODS at a time. Problem i am facing is upload is ending up with error mesg. Error Mesg are <b>Error 8 when starting the extraction program - R301

  • Scrambled graphics in iMovie and iPhoto

    When using iMovie and Wondershare Video Editor I get scrambled graphics which has now spread to iPhoto. Will my iMac recover by itself or is this a sign of a damaged graphic card or similar. Graphics on the internet seem to be working OK. I'm using 4