I can't get more than 2 calendar events to post in the notification center even though I have 10 items checked in the settings area. Any advice?

I can't get more than 2 calendar events to post in the drop down notification center, even though I have 10 checked in the settings area. Any advice?

Same here. I've been searching for a solution but have found nothing.

Similar Messages

  • How can I get more than one firewre port ?

    Hello,
    how can I get more than one firewire port ? I'd like to be able to connect my canon HV30 camera as well as my firewire external HD at the same time so I can use firewire to upload the videos I've taken. Is this possible?
    TIA

    Hi ginestre-
    Many FireWire hard drives have 2 firewire ports so that you can daisy-chain devices and connect the camera that way.
    Daisy-chaining is not the most reliable method, but it works, so you could buy a FireWire hub.
    Luck-
    -DP

  • How can i get more than 100 email in Mail? I can only see the latest 100. I have an hotmail account and it worked at my other mac.

    How can i get more than 100 email in Mail? I can only see the latest 100. I have an hotmail account and it worked at my other mac.

    How can i get more than 100 email in Mail? I can only see the latest 100. I have an hotmail account and it worked at my other mac.

  • I am running a strain gage test and can't get more than 1000 samples

    A formor employee left a strain gage VI that I am attempting to reuse but no matter what I do I can,t get more than 1000 samples before needing to restart the loop. In the task timing (of NI-DAQmx) I have set the acquisition mode to N Samples and the clock settings to read 65000 samples at 25 Hz. There is a DAQmx timing(sample clock) VI that resets to finite samples and 1000 per channel when I close it but I have reset it to 65500 continious samples and left it open to no avail. There is a rate input to this sample clock on the front window that I have tried setting to several different rates to no avail. The Vi will run about 15 seconds, collect 1000 samples and then ask to verify the file location to save the data to. Upon verifying the file location the VI will run another 15 sec. loop before stopping for verification again.
    If the loop is stopped rather thanhaving the file verified an error is listed:
    Error-200278 occurred at DAQmx Read (Analog 1d WFm NChan NSamp).vi:1
    The given possible reason given is: attempted to read a sample beyond the final sample acquired.
    When I stop attempting to run the VI the block diagram opens with a dark block around file creation block. I need this VI to run for 10 min. collecting samples at about 25/sec. Can someone help me figure out what I am doing wrong?
    I have made screen shots of the VI and the error code to assist finding the incorrect programing.
    Thank you for your help.
    Jim Steinmeyer
    Jim Steinmeyer
    Design Engineer
    Reinke Mfg.
    PO 566
    Deshler NE 68340
    [email protected]
    Attachments:
    strain test error.doc ‏493 KB

    Thank you,
    I was just thinking about being able to increse the size of the doc.  for better visability. I have tried working with the rate input for the DaQmx for the sample clock and it does change the frequency of sampling, but I still get just the 1000 samples. I have included Jpegs this time. I have tried to exppand the two DAQ assistants that arn't expanded but am unable to, I also am unable to find a "propertys" command to open them up and see what exactly they do. The nested while loop for output also seems strange to me. Maybe I would be better to attempt a new program but being new to the language I thought using an existing program might be best.
    Jim
    Jim Steinmeyer
    Design Engineer
    Reinke Mfg.
    PO 566
    Deshler NE 68340
    [email protected]
    Attachments:
    block diagram.JPG ‏134 KB
    DAQmx.JPG ‏129 KB

  • How can a get more than 1 page on a greetings card in elements 11

    How can a get more than 1 page on a greetings card in elements 11

    Some menu entries in the main menu bar are hidden if you use the mouse and only appear if you use the keyboard to open the menu (Bug 626825).
    You can see the difference if you use Alt+F to open the File menu or Alt+B to open the Bookmarks menu and compare that to what you see if you use the mouse to open the menu after you have made the menu bar visible by tapping Alt or by pressing F10.
    * "Bookmark All Tabs" (Shift+Ctrl+D) no longer shows in the Bookmarks menu unless you open the Bookmarks menu via the keyboard (Alt + B).
    * "Bookmark This Page" can be accessed via the right-click context menu of that browser page.
    * "Bookmark All Tabs" can be accessed via the right-click context menu of a tab on the tab bar.
    See also:
    * [[How do I use bookmarks?]]
    * Bookmark All: https://addons.mozilla.org/firefox/addon/bookmark-all/

  • Can not get more than one computer to access internet

    using airport and can not get more than one computer to access internet wirelessly... currently airport is in bridge mode and internet sharing is set to "off" in network preferences...
    help - what should the settings be in airport and network preferences?

    are using internet connection as dhcp?
    Yes.
    bridge mode seems to only work with pppoe connection to internet which is what my set up is
    But you've never said why you're using bridge mode (I'm not), which -- as I've explained before -- is probably the reason you can connect only 1 client at a time.
    If you'll setup the AX as a regular, main base station, connect using DHCP, and share IP addresses, you should be fine.

  • My past computer crashed and I am trying to get all my itunes songs back for my new computer, but even though I have downloaded all my past purchases some of them still aren't playing and can't be located. What can I do?

    My past computer crashed and I am trying to get all my itunes songs back for my new computer, but even though I have downloaded all my past purchases some of them still aren't playing and can't be located. What can I do? It is quite alot of lost songs/ money.....
    Thanks anyone who can help, Apple make it impossible to talk to anyone or contact and I can't navigate Express Lane
    x

    I realise there have been a number of threads like this now that I have started looking, the problem is the back-ups i made were saved to a server network which has now also gone down, a case of dreadful luck really. Is there any other way to get the music back?
    Regards

  • My daughter had completed a chart in pages. I saved it and then clicked on other chart types. Now I can't go back to the original chart she made even though I have not re-saved the file. How can I go back to her original chart with data?

    My daughter had completed a chart in pages. I saved it and then clicked on other chart types. Now I can't go back to the original chart she made even though I have not re-saved the file. How can I go back to her original chart with data?

    I don't get what you are saying.
    Is this all the same document?
    What version of Pages?
    Have you tried to revert to a previous version?
    Peter

  • How do I get idvd on my computer? It did not come installed even though I have ilife

    How do I get idvd on my computer? It did not come installed even though I have ilife? Also, no operating system dvd came with my computer. I have had it for 5 months so its quite new.

    iDVD is no longer developed or shipped by Apple. You can purchase an iLife 11 disk (if you can find one) or purchase an alternative DVD authoring app.
    SInce 10.7 should you need to re-install you do so via the Recovery partition and/or the App Store.
    http://reviews.cnet.com/8301-13727_7-20083166-263/managing-the-os-x-10.7-lion-re store-drive/

  • I keep getting a pop-up window with the following message, even though I haven't got anything plugged in to any USB points.

    I keep getting a pop-up window with the following message, even though I haven't got anything plugged in to any USB points. It comes up every few seconds, often multiple times at once. Can anyone advise why it is happening and how to get rif of it?

    Reset your SMC.
    Resetting the System Management Controller (SMC) - Support - Apple

  • Safari won't trust ANY website certificate, even after I tell it to, and i can't connect to the APP store even though I'm clearly connected to the internet.  This all started immediately following a RAM upgrade.  Please advise.

    Safari won't trust ANY website certificate, even after I tell it to (click Always trust this site option), and i can't connect to the APP store even though I'm clearly connected to the internet.  This all started immediately following a RAM upgrade.  Please advise.

    Take each of the following steps that you haven't already tried. If the problem isn't solved, ask for further instructions.
    1. Are the current date (including the year) and time shown on your system clock? If not, correct them and test.
    2. Disable any third-party firewall, "security" software, or network filter.
    3. In some versions of OS X, Parental Controls has a bug that prevents loading of secure websites. Turn it off.
    4. The process by which OS X checks the validity of root SSL certificates doesn't work behind the authenticating SOCKS proxies used on some enterprise networks. If applicable, contact your network administrator. The proxy server may need to have its settings changed.

  • Sometimes my ipod does not down load my entire library when I sync up with itunes, even if I have items loaded in the play list and can see them in the play list in my itunes when I check my ipod play list some items are missing part 1 will be there but p

    Sometimes my ipod does not down load my entire library when I sync up with itunes, even if I have items loaded in the play list and can see them in the play list in my itunes when I check my ipod play list some items are missing part 1 will be there but part two is not. Why?????

    How is your iPod configured to sync music from your iTunes library?  In other words, what options and configurations do you have enabled from under the iPod's Summary and Music configuration panes in iTunes?
    B-rock

  • In month view, can't see more than 2 events per day...

    I always keep my calendar in the "month" view because I have so much going on... But each day won't display more than two events. If I have more than two events, there's a "..." at the top of the day with two of the events underneath it. Each box for each day has so much space! I could fit like 5 other events! How can I display them all??

    Is there a way to make things on the screen smaller? I've tried to use the touch screen taking my fingers and pulling together like you would zoom in and out but that doesn't work. This did not solve my problem. I hit the wrong button again. I have fat fingers.

  • Can I get more than one account on iphone microsoft exchange server

    Hi all,
    I was trying to get more than one account on iphone microsoft exchange server for mail, but it seems to only accept one. Is this true with everyone else out there. I guess I am one of the few people with more than one email account that uses microsoft exchange. I would love to have the convience of accessing them through iphone mail but it seems that I will be forced to use safari for the other two by typing owa... in the url.
    any workaround to the one email account per iphone policy??

    Yu can only have one Exchange Server account per device. This is true to iPhone and any Windows mobile device in the market. The work around is to set your other accounts that reside on an Exchange server using IMAP or POP settings as you used to do before the Version 2 update allowed you to sync directly to the Exchange Server. This methode will allow you to add as many accounts as you want or have.

  • Adobe Web Gallery- can't get more than 10 images to show up

    I am trying to create a Web Gallery from within Bridge (CS4), but I'm not having any luck getting more than 10 images to show up when I create the Gallery, even though I'm selecting nearly 50 images (all in the same folder) that I'd like to be in the Gallery. Does anyone know if there's a limit to the number of images that can be used in an AWG? I can't seem to find ANY documentation that sheds light on that subject. All I know is that no matter WHAT I do, I can only get Bridge to create a Gallery with TEN images!! Very frustrating. Any help will be greatly appreciated.

    Assuming the obvious that in Bridge content panel you have selected all the
    files you want in the web galery
    First try a purge cache for folder using the menu Tools/purge cache for
    folder when having Bridge pointed to the problem folder.
    Second try a reset preferences with option key while restarting Bridge.
    I wish that were the case - it's only outputing up 10 images...

Maybe you are looking for

  • Printing event locations in Week view

    Hello, I'm trying to print out my class timetable for the term, and it would be exceptionally useful if i could see the locations of each class/event in the print out rather than having to write them in by hand! I can't see any option to select/desel

  • SQL query works in the SQLPlus, but fires parse error after being cut and pasted into

    One of our client has a SQL query like this: SQL> SELECT LNAME, 2 QUOTA/12, 3 (SELECT SUM(CAMT) FROM CONSULTING WHERE CONSULTANT = P.EMPLOYEE 4 AND ACTIVITYCODE = 'C'AND 5 CDATE BETWEEN '01-JAN-2001' AND '31-JAN-2001') AS SUM, 6 (SELECT SUM(CAMT) FRO

  • How do I combine multiple single pdf's into one pdf document w/ multiple pages?

    How do you combine multiple single page pdf's into one pdf document w/ multiple pages?

  • JTableHeader and Mac L&F

    I want to change the background color of my header on my JTables running on a Mac. I've tried table.getHeader().setBackground(myColor) but that doesn't work. So I thought it might be a L&F thing. I tried the following: UIManager.getDefaults().put("Ta

  • IPhone don't open help me !!!!!

    Hello,          Yesterday I lost my iPhone,after that I used my lab to find it,play sounds and show message "Please call me on .............". I found iPhone,but in next day tha iPhone was Closed and I tried alot but hopless case. What Should I do?