I can't get more than one window of Firefox to open no matter what I try. Help!

I recently had a virus and had to do a system restore to about a month ago. After the restore everything worked okay, except for Firefox. Now I can't open more than one Firefox window at a time and the window that is open is having a bunch of problems (right clicking won't open things into tabs, the back button isn't working, etc.). I've tried uninstalling and reinstalling Firefox, but that did nothing.
== Yesterday

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

Similar Messages

How can I get more than one firewre port ?

Hello,
how can I get more than one firewire port ? I'd like to be able to connect my canon HV30 camera as well as my firewire external HD at the same time so I can use firewire to upload the videos I've taken. Is this possible?
TIA

Hi ginestre-
Many FireWire hard drives have 2 firewire ports so that you can daisy-chain devices and connect the camera that way.
Daisy-chaining is not the most reliable method, but it works, so you could buy a FireWire hub.
Luck-
-DP

Can not get more than one computer to access internet

using airport and can not get more than one computer to access internet wirelessly... currently airport is in bridge mode and internet sharing is set to "off" in network preferences...
help - what should the settings be in airport and network preferences?

are using internet connection as dhcp?
Yes.
bridge mode seems to only work with pppoe connection to internet which is what my set up is
But you've never said why you're using bridge mode (I'm not), which -- as I've explained before -- is probably the reason you can connect only 1 client at a time.
If you'll setup the AX as a regular, main base station, connect using DHCP, and share IP addresses, you should be fine.

Can I get more than one account on iphone microsoft exchange server

Hi all,
I was trying to get more than one account on iphone microsoft exchange server for mail, but it seems to only accept one. Is this true with everyone else out there. I guess I am one of the few people with more than one email account that uses microsoft exchange. I would love to have the convience of accessing them through iphone mail but it seems that I will be forced to use safari for the other two by typing owa... in the url.
any workaround to the one email account per iphone policy??

Yu can only have one Exchange Server account per device. This is true to iPhone and any Windows mobile device in the market. The work around is to set your other accounts that reside on an Exchange server using IMAP or POP settings as you used to do before the Version 2 update allowed you to sync directly to the Exchange Server. This methode will allow you to add as many accounts as you want or have.

When in safari how can i have more than one window open?? New ios doesnt allow it.

Problem is when i updated to the newest ios 7. The dang thing doesnt allow me to have more than one window open at any time. This only makes things repetitive, complicated and slow. Moreover, the icons and overall view are probably designed to be in a kindergarden game, cos they look really stupid on iPad, whos gonna take apple seriously with this so called "improvements". If anyone knows how to open more than one window at at atime i,ll be really grateful to be told. Or if anyone can tell me how to uninstall the friking update i,ll be even more grateful. Thanx guys.
<Subject Edited by Host>

Tap "+" sign on top right.

Cannot open more than one window with Firefox

I've been having this problem for a couple of weeks, now, and I've run out of ways to try and fix this.
One day, after starting my computer up, I opened Firefox. No big deal, everything looks fine, tabs are working, etc. Then, when I went to open a second window, nothing. The first window still works fine, I can open tab upon tab, but it just won't open any more windows.
As much as I'm a fan of the browser tabs, I still prefer to have them spread out over more than one window.
I've read through a ton of different troubleshooting walkthroughs and whatnot, reinstalled three or four times, restored settings, but nothing works.
Well, not entirely, I guess. Here's the part that I can't quite figure out. When I disable every single addon, Firefox works just fine. I've done the checking down the list, trying to single one out, but it's *any* addon. Even something as simple as a dictionary search ([https://addons.mozilla.org/en-US/firefox/addon/68/]) causes this to happen.
I've checked with an older computer with an older version of Firefox, and it still seems to work fine with addons enabled, so I'm wondering if this is an update issue?
Would reverting back to a previous version of Firefox solve this, and if so, where would I be able to find downloads for a previous version?
So, like I said, I'm at a bit of a loss here. Sort of at a crossroads for trying to figure out what to try next, so I'm hoping someone a bit more knowledgeable can help steer me in a direction.
Edit: I just noticed that the posting includes system information with my question. I should clarify that I'm posting this from an older computer with an older version of Firefox. On the computer that I'm having this issue with, I'm using the newest version of Firefox (3.6.8).

Some old posts indicate the following add-ons have caused the problem of not being able to open a new window in Firefox in the past. If you have any of them you might want to disable or uninstall them to see if that is causing your problem. 
* HP Smart Web Printing Toolbar
** https://support.mozilla.com/tiki-view_forum_thread.php?locale=en-US&comments_parentId=531462&forumId=1
* Skype
** https://support.mozilla.com/tiki-view_forum_thread.php?locale=en-US&comments_parentId=472881&forumId=1
** https://support.mozilla.com/tiki-view_forum_thread.php?locale=en-US&comments_parentId=531462&forumId=1
* Zone Alarm Toolbar
** https://support.mozilla.com/tiki-view_forum_thread.php?locale=en-US&comments_parentId=472881&forumId=1
** https://support.mozilla.com/tiki-view_forum_thread.php?locale=en-US&comments_parentId=624545&forumId=1
** http://forums.zonelabs.com/showthread.php?t=73592&highlight=firefox+window
 
You need to update your plug-ins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
* Adobe Shockwave for Director Netscape plug-in, version 11.5 (you '''may''' need to update)
* Shockwave Flash 10.0 r32
* Java Plug-in 1.6.0_11 for Netscape Navigator (DLL Helper)
#Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Shockwave Flash'''
#*Use Firefox to Download and SAVE to your hard drive from the link in article below
#*SAVE to your Desktop so you can find it
#*After download completes, close Firefox
#*Click on the file you just downloaded and install
#**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
#**Note: Most browsers other than IE will also get updated with this one download
#**Note: To update IE, same procedure '''but use IE''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
#*After installation, restart Firefox and check your version again.
#*'''Download link and other information''': https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox
#* Removing old versions: http://www.java.com/en/download
 
You are using an out-of-date version of Firefox. Unless you have a reason for using that old version, you might want to consider upgrading.
*The Firefox version series 3.0.x is no longer being supported or updated, even for security issues.
*The last version in the 3.0.x series was 3.0.19 which was released 03/15/2010.
*You are using version 3.0.13 which was released 07/31/2009.
Consider upgrading to the current version, Firefox 3.6.8. Firefox 3.6.9 is scheduled to be released in a few days and the new Firefox 4 will be released later this year or early next year.
* See: https://support.mozilla.com/en-US/kb/Upgrading+to+Firefox+3.6
* Or you can download the full installer and save it to your hard drive for installation from: http://www.mozilla.com/en-US/firefox/all.html
* Also see: http://support.mozilla.com/en-US/kb/Installing+Firefox

Can't get more than one month of backups with Time Machine

I seem to be having persistent problems with TM. I have a 1TB HD and in the past I have been able to get up to several months of backups from around 140GB with exclusions. However, lately I seem to be plagued with "SystemFlipper" messages that start a full backup and result in the removal of previous backup such that I seem unable get have more than just over one month of backups. This seem to occur mostly at the first backup of each day and then works fine for each subsequent hour after doing the "Full Reset" as per Pondini (http://pondini.org/TM/A4.html). Other days it seems to work fine.
I have been reviewing other related discussion in this forum and cannot seem to find an answer. It is possibly to do with residual pre-Intel programmes is the best I can determine, but the problem is how to find the culprits in my list of applications either remove them all together or transfer them to another HD I use for non-essential data and files. I have done this for a lot of other data and have added exclusions for some file that were giving me identified issues.
Would appreciate any suggestions as I'm getting a little frustrated at having to do a reset so often, and not being able have a greater time period of backups given that there was a time when I had nearly a year's worth.
Thanks, Dave

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

External MIDI device, can't get more than one sound, Logic Express 9 & Korg N364

Hi, I just beginning to use Logic. I trying to get Logic Express 9 to work with and use my Korg N364 keyboard/workstation as an external MIDI device. I can only get one sound at a time even though I create multiple tracks and assign different programs (or patches) to them.
Each time I do the following: I add a new external MIDI track, change the Channel to new number, put a check in the Program box ( as well as the Volume & Pan), and choose a instrument or patch from the Program drop down menu. What happens, though, it changes the sound to that instrument alright, but ALL THE PREVIOUS EXTERNAL MIDI TRACKS HAVE THE SAME SOUND NOW. I've followed the tutorials I found on the web and it seems like I'm doing everything correct in Logic. I hooked up the MIDI cables, added a new device and connected virtual cables in the MIDI studio window of my Mac OS, and have added the proper Korg multi instrument in the environment window of Logic and "un-slashed" the 16 channels. I get the sounds from the Korg no problem, it's just that I can only assign one sound and no more to the external MIDI tracks. Is there something in my Korg I need to do? Or am I missing something in Logic?

It's not Logic, it's how you have the Korg setup.
I'm not familiar with that model but it is a workstation so I'm pretty sure you can set it to a "Multi" mode.
Right now you are running it in single patch mode.
In single patch mode only one sound is available on a single MIDI channel, your Korg probably has a Multi or Combi mode, this is where multiple sounds can be played, each sound has to have it's own MIDI channel.
You will need to set this up on the Korg first.

Can't get more than one mac online at once with aiport express

Hi, I hope someone can help - I've searched the forum and been on the phone to level 2 support at Apple for 6 hours to no avail!
I have a D-Link DSL 300G+ modem connected to an airport express and can connect to the internet fine on just one mac if I uncheck the 'Distribute IP addresses' option - if I check this option, whatever settings I have entered has prevented me from accessing the internet at all (I have no idea what settings to enter, I have just followed suggestions from Apple).
This problem arose when following Apple's diagnostics on a minor ichat issue, I disconnected my modem and reset my AX settings (until then everything had been fine.) I have called my ISP and D Link and they tell me the issue is with the AX.
This is my first posted question so I hope I have given all the relevant and necessary information.
Much appreciate any help at all.
Thanks,
Wayne.

Hello Wayne Rosie. Welcome to the Apple Discussions!
Let's double-check your AirPort Express Base Station's (AX) settings ...
Perform a "factory default" reset of the AX
o (ref: http://docs.info.apple.com/article.html?artnum=108044)
Modem/Router Power ReCycling
o Power-off the ADSL modem, AX, & computer(s); Wait at least 30 minutes.
o Power-on the ADSL modem; Wait at least 15 minutes.
o Power-on the AX; Wait at least 5 minutes.
o Power-on the computer(s)
Either connect to the AX's wireless network, or temporarily connect your computer directly using an Ethernet cable to the Ethernet port of the AX, and then, using the AirPort Admin Utility, check these settings:
AirPort tab
o Base Station Name: <whatever you wish or use the default>
o AirPort Network Name: <whatever you wish or use the default>
o Create a closed network (unchecked)
o Wireless Security: Not enabled
o Channel: Automatic
o Mode: 802.11b/g Compatible
Internet tab
o Connect Using: Ethernet
o Configure: Using DHCP
o WAN Ethernet Port: Automatic
Network tab
o Distribute IP addresses (checked)
o Share a single IP address (using DHCP & NAT) (enabled)
Once you verified that you can get Internet access for all of your computers, you should secure your wireless network.

Can't get more than one Ultrabeat sound setting in one project. If I have a drum track with an Ultrabeat "downtempo kit" and I make another drum track with "hip hop kit" in the same project, the settings of the other track transform to "hip hop" setting.

So here's my situation. I'm using Logic Pro 9. I'm trying to use multiple drum tracks each with different Ultrabeat settings. So let's say I have drum track with a loop from Ultrabeat that has the "downtempo kit 2" setting on it. If I make another drum track and create a different loop in Ultrabeat with a different setting, let's say "hip hop kit" for example, and put that loop onto the new track, then the previous loop that I had in the first drum track will still be the same loop but the sound kit settings change to that of "hip hop kit." So I can have different loops, but they all have to be "hip hop kit" settings or "downtempo kit 2" settings. I am unable to multiple kit settings. Is there a box I need to check to turn some automation off or something, because this is pretty inconvinient? Why do I have to have only one Ultrabeat sound/kit setting per Logic project?

Sounds like maybe you're using the same channel strip on multiple tracks? Make sure you're creating a new software instrument channel strip for each independent instance of Ultrabeat you want to have. If you use the same CS, then all tracks that use it will have to have the same kit.

How can I have more than one window open at a time, say to compare information?

As I am doing family research, I sometimes need to have a window open so I can transfer some of the information to another window, or to double check dates etc. Although the information is available instantly by clicking on tabs, I would still prefer to have it in front of me for comparison.

You can tear off a tab (right-click: Move to New Window) to open it in another window and resize both windows so you see them at the same time.
*Fox Splitter: https://addons.mozilla.org/firefox/addon/fox-splitter/
*Split Pannel: https://addons.mozilla.org/firefox/addon/split-pannel

Can't get more than one gmail calendar to show up.

I have linked my iTouch to my gmail account. I can get to all my email and contacts but it has only brought over 1 calendar. Is there a way to get the rest of my calendars to show up?

Hi,
See my post here:
https://discussions.apple.com/message/15253863#15253863
Best wishes
John M

Can I get more than one song to accompany a slideshow on my iPad?

I have set up a slideshow on my iPad. I have created a playlist for it but only the first song in the play list plays and then repeats. I would like the songs on the playlist to play in sequence during the slideshow. Any suggestions?
Thanks

It depends on your apps.
Photo Manager Pro allows 4 songs on Slideshows.

Please help cannot open more than one window at a time.

Everything was working well but this morning I could not have more than one window (application or folder) open at a time.
As soon as I open one, the previously oppened one closes.
I tried restoring from Time Machine and also Lion altogether but this behaviour did not change.
I posted in the Imac forum as well but maybe this forum is more appropiate.
Thank you.

Another possiblity is that "Single Application Mode" has been set. This would be unusual as it normally takes a terminal command to set it. You can check by downloading the program TinkerTool from this site:
http://www.bresink.com/osx/0TinkerTool/download.php5
It's free and doesn't modify your system, just turns on or off the hidden options that are already there. Run it and look in the Dock tab and see if this option is checked. If so, uncheck it and click the relaunch dock button.

How To Get more than one Return Values in LOV ADF

In ADF LOV, I can get only one return value;
How can I Get more than one values like in Oracle Form?
SomeOne can help me?
Thanks

you may add more <set> tag like the following:
<event name="lovSelect">
<set property="inputValue" value="${bindings.Id.inputValue}" target="${data.work_workBusinessViewUIModel.buyCompanyId}"/>
</event>
or you can implement your Action

I can't get more than one window of Firefox to open no matter what I try. Help!

Similar Messages

Maybe you are looking for