I can't get my gmail app to send alerts after doing update. I'm using iphone 5. Any ideas?
I can't get my gmail app to send alerts after doing update. I'm using iphone 5. Any ideas?
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
1. Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
2. Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
3. Restart the Apple TV (Settings > General > Restart).
4. Restart the Apple TV by removing ALL the cables for 30 seconds.
5. Restart your router. (Also try removing it’s power cord for at least 30 seconds)
6. Restart your mobile device.
Similar Messages
-
TS1702 How can I get my downloaded apps to stop crashing after I try to access them?
How can I get my downloaded apps to stop crashing after I try to access them?
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
I can't get adobe bridge to open on my iMac... CS6 works perfect. Any ideas of what I need to do?
I can't get adobe bridge to open on my iMac... CS6 works perfect. Any ideas of what I need to do?
Thanks JudyThe lack of security updates requires me to update any old OS. Unless you never connect to anything on the Internet with the computer OR you never have anything to protect on your computer running such a computer leaves you open to theft, fraud, etc. The major problem with Mavericks and soon with OS X.X is unfamiliarity. Sure they have features we don’t like. But I bet so did the one you are running, when you upgraded to it.
Having said that I really got miffed when I was required to update my TV to work with digital signals. I have no trouble telling people to upgrade their computer, but ask me to upgrade my TV those were fighting words. -
I have a Macbook Pro early 2011. i don't have AirPlay on my computer. How can I get it. I have read that early 2011 should have the AirPlay option. Any ideas please.
Hi All,
I need your expert advice to proceed. I bought apple TV and it works fine with my iPad and iPhones also fine with itune of my Mac Book Pro BUT I am not seeing setting which says "Airplay Mirroring" in system preference -> Display at all.
I checked my mac serial number and it shows the model as below. As far as I understood this feature should be there from 2011 onwards.
MacBook Pro (13-inch, Late 2011)
Software Mac OS X Lion 10.7.5 (11G63b)
Please suggest!!
Thanks and Regards -
Can't access App Store after update to os6 on iPhone 3GS any ideas?
Can't load App Store or iTunes after updating to os6 using iPhone 3GS can access using ipad2 so not sure it's a high volume problem. Anyone having the same problem and found a fix. Thanks
Thanks Apple Support. Problem was wifi related. Required forgetting the network resetting the router and re- establishing the connection. If anyone has the same symptoms. Apparently has happened before
-
Sometimes after putting my iMac to sleep, I cannot get it to wake up again. It's as if it's shut down and I have to turn it off at the mains and restart it. Any ideas why? Does this keep happening to anybody else?
That message means that you have to restore the iPad now. Something went wrong. You need to restore the iOS software and then restore from the backup.
Read this carefully and follow the instructions. Make sure that you restore from your backup at the end of the process. That is covered at the bottom of the support article.
http://support.apple.com/kb/HT1414 -
I have tried everything I know of. It worked fine an hour ago. I have a white screen, buttons will not turn it off and I get get to anything. Any ideas whats going on?
Thanks for any help.Sunny1963 wrote:
I have tried everything I know of.
That's fine - except nobody here knows what you have been able to think of try to this point.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
It really helps if you let others know "what you know of" and already tried. -
Anyone have any ideas on how to unlock the desk top?
Whoah boy, lots of things here and I have to make supper...
I'll choose a few at a time. "RAM drives"
RAM drives? Do you mean hard drives? Do you mean RAM chips?
If hard drives, did you put them back in the same order? Multiple hard drives in one machine often need to be jumpered correctly when you move them about.
If chips... It's too difficult at this stage to tell if it is hardware or software. If hardware it could be chips, and that error at the end had a vague chip ring to it. One way to test for chips if you have extra chips is to pull all but the minimum required to boot and see if it boots.
You mention a backup drive. This wouldn't happen to have a clone of the operating system on it would it?
4 drives... All internal?
From all you've said it could be hardware or software. Blue screen could be software but failing hardware can corrupt a drive, messing up the software.
Boot discs. It sounds like you have no boot discs (CD. DVD) for this computer, right?
What computer are you using right now? -
I'm in an area where I can only use dial up.Right now, I use Firefox version 3.6 and have no problems with SlipStream. SlipStream is an accelerator for dial up.I want to update to 8.0.1,but it doesn't appear to be compatible with SlipStream. My local tech support (Pennswoods) doesn't think it's compatible. The existing plugin doesn't work. Any ideas what I can use? Thank you for any info. (I'm not real great with computers)
Sorry, you are stuck with whatever version of Slipstream that your ISP has available. They should know which versions of Firefox are supported by their accelerator plugin, because your ISP is more than likely paying Slipstream for every update that is necessary. <br />
Have you asked your ISP which versions of Firefox are supported by their accelerator plugin?
Beyond that, the only thing that I can suggest is to see if the [https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/ Addon Compatibility Reporter] extension forces that accelerator plugin work in Firefox 8, with the compatibility override. But, if that plugin hasn't been updated for a Firefox 4+ version at all, I doubt if it will work even with the ACR addon. -
I installed a new Canon printer several months ago that I was told by the salesman could be shared between my iMAC and HP laptop. I have successfully used the printer wirelessly from both computers, however, it gets hung up switching between the two and I'm not sure what to do to get it to be consistent. Any ideas?
You didn't state how it's connected to each computer, if it's connected through your router then it should work. If it doesn't then you need to contact Canon and ask for assistance.
-
Hi, I had to wipe my computer, reloaded itunes, but now when i plug in my ipod touch, it doesnt appear to be regeristing, any ideas please?
Restore your media from the backup of the computer, iDevices are NOT backup devices.
-
How can I get my mail app to sync from my mac to iPhone, I don't have the 'info' option in iTunes?
How can i get my mail app to sync from my mac to iphone? i dont have the 'info' option in itunes!
I have created files within the mail app and want them to be the same on my mac and iphone.You need a mail server that supports this then. Hotmail premium I believe does, but the free version does not. Gmail supports it, and any ISP that offers IMAP supports this capability. iCloud definitely supports it, so if you create a free iCloud email account and switch your primary email to it you would have this capability.
-
Updated to an iphone 4s from iphone 4. Did backup and sync but some apps have not been copied to the 4s although they do show up on the iphone4. How can I get my missing apps?
Download Past Purchases
http://support.apple.com/kb/HT2519
Log into iTunes using the account the Purchase was made with... Click on Buy... and a notice will come up saying you already have it... do you wish to download it again... Click Yes... -
How can I get the iBook app on my Mac to backup ePubs I created with Pages on my iPad? Only seems to want to work with purchased books from the ibook store. The problem is, once I create a document in Pages and turn it into an ePub to be opened in iBooks, I delete the document in Pages, because I don't need two copies taking up space on my iPad. Before Maverick, iTunes would backup everything in my iBook app on my iPad. If something ever happened to my iPad, all of my created ePubs would be lost and I would be screwed. I suppose I could keep everything on Pages and go to iCloud and download my documents to my Mac, but that is a lot of steps. I may have to do that if there is no other way, but I am hoping someone will have the answer for me. Pretty disappointed in iBooks app for Mac at this point.
iBooks only syncs purchased books. Others must be synced in iTunes.
-
Can I share one iTunes account for my iPad and two I phones? If so, how can I get the purchased apps and music on all three devices? How do I sync all the devices to have the same music and apps?
You can set up an iCloud account on each one (the SAME iCloud account using the same AppleID on each) and then sync via iCloud.
http://support.apple.com/kb/HT5262\
However, an iCloud backup nor sync contains purchased content - that is available for redownload from the iTunes and App stores (so no need to waste iCloud space storing it for you).
So, for purchased content, you will have to download it on each device - just use the same AppleID and download each item on each device.
Without a computer to aid the sync'ing, downloading the purchased content on each device is the only way.
P.S audiobooks cannot be re-downloaded once purchased (all other content can be), so without a computer to save, store and move the audiobook files around, you will only be able to put those on one device - the one you first purchase it on.
Maybe you are looking for
-
Using Nokia Lumia in USA/Canada
I'm confused by information that I've seen online. My question however is simple... Can I use my Nokia Lumia 520 in USA/Canada? I want to buy a cheap sim card when I'm out there on holiday later in the year but no point if I can't get any reception
-
I read the earlier posts about this, but still have questions. We need to write to a properties file to store user settings. We want to create two properties files. The first will not be edited by users and will be included in the jar file. This file
-
This will be a make or break feature for me, I do not intend to abandon my Power PC based Mac machines, so need a browser that is supported on them, and also provides at least minimal support for my Microsoft based PC (kept for those few applications
-
Hi All, just i want to confirm my understanding in Datawarehousing? 1-Datawarehouse system will have a group of entities , each entity is a star schema and denormalized we use discoverer to build reports from those schemas 2-discoverer can be used al
-
Like many of you, after the so-called "upgrading" to Mavericks, I can no longer scan off of my printer/scanner (it's a Dell 1355 cnw). It worked fine with Mountain Lion through Image Capture, but now Image Capture does not see the printer/scanner.