I can't get my I Pod to Turn on. even when i plug it in it doesn't turn on. what should i do?
When I went to clean I went to turn on my iPod and it wouldn't turn on. I plugged it into every Plug In, in the house and it wont even recognize that it is there. so I am asking you. what should I do? I have tons of apps and songs on an 8GB, 3rd Generation I Pod. I got for Xmas in 2010 so it's relatively new! Not even a scratch on it.
So what should I do about it?
If your battery is totally out of juice, you need to plug in to a wall charger and wait for a few minutes before it has enough juice to show a charging symbol on the ipod.
Similar Messages
-
Help! My iPhone 4 displays a cord to an itunes icon and I can't get it to go away...even when plugged into my computer. My computer doesn't recognize it as a device. How can I just cancel all this and get my phone back to normal?
You might want to try performing a hard reset of your device; this will restart it and generally clear out any errors, it will not erase any data on your device.
Press and hold both the home button and the lock button (the button on the top right of the iPhone) for several seconds until the Apple logo appears. -
I have a 4th generation IPod touch. Today I downloaded the new iOS 6.0.1 and I have a question. Is there any way I can get rid of the noise when I plug it in to charge? I had it set that way before, and I can't seem to figure out how I did it. I found when I turned down the over all volume it gets rid of it, but I don't want to change the over all volume. Thanks so much for you help and Happy Holidays.
If it has NEVER been jailbroke, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this. -
I'm getting a message "Sync failed to start" when I try to sync my iPod Touch 4 to iTunes. Of, course, it worked when I took it to the Apple store for help. Now I'm having the problem again at home. :( What should I do?
Try:
Sync Session Failed to Start iTouch iOS5: Apple Support Communities
iphone could not be synced sync session failed to start...: Apple Support Communities -
I can't get rid of white space between images (even when margins are 0)
I'd like the user to be able to add two images that actually touch. I've set up 2 image fields that are touching, and set the margins to 0, but there is still white space in between the user added pictures.
I thought maybe the problem had something to do with borders, but when i click the borders palette, it tells me "these properties are not available for forms that contain background artwork".
Any help is appreciated.The behavior only appears if you create a static form.
I saw an old thread about it here in the forums, you have commented too.
It probably will never get changed or nobody have ever send a bug report about this to Adobe.
http://forums.adobe.com/message/4927663#4927663
I never had such problem with image fields in dynamic forms.
And I almost never build static forms from existing PDF files, as those forms are too limited in — ahem — everything. -
Please help me. i am very upset because i cannot afford to waste money on another one
- Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Next try restoring on another computer
- Last, make an appointment at the Genius Bar of an Apple store. That way you can demonstrate the problem.
Apple Retail Store - Genius Bar -
Where can i get my i pod fixed
Hey were can I get my I Pod fixed
You send it to Apple to be swapped for a refurbished one for a flat fee. See here for pricing:
http://www.apple.com/support/ipod/service/prices/
Or do a simple Google search for "iPod repair" and you should get a plethora of results to work with. There are tons and tons of third party repair facilities out there who get the job done.
B-rock -
I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.
Will not work. To my knowledge, dual converting like that isn't supported. The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.
-
My iPhone will
not connect to the internet properly. It says that it is connected, the App Store won't load apps and I can't get on my face book app. I have tried wifi and my cellular data, neither work. What are some ways to fix this?Try resetting your network settings.
Settings>Genenal>Reset>Reset Network Settings. -
Since installing the last iPhoto update sharing a photo via e-mail opens a google e-mail format instead of an Apple Mail format. How can I get the Apple Mail format to come up when I click on share?
iPhoto preferences - set the email client to Mail
LN -
I upgraded to IOS 7 and now I can't get my Hotmail account on my phone. When I type in all the information, I get "Unable to Verify Account Information". How do I get to use my Hotmail account using this software????
I have had the same problem as yours on my Ipad after upgraded Procreate 2.01. My iOS is 7.04. I tried to find solution from internet for weeks. Fortunately, the problem was resolved a few minutes ago. It is very simple,
1. Lunch outlook.com to confirm you can access hotmail mailbox. It means your account is Ok.
2. Go to setting>Mail,Contacts,Calendars.Delete your hotmail account from your device.(my device is Ipad)
3. Turn off your device, then turn on again.
4. Go to setting>Mail,Contacts,Calendars and create your hotmail account by tap outlook.com. Be sure the incoming mail server is pop3.live.com.
5. Waiting for validation.
That's all. Hope my experience is helpful. Good luck!
Nelson -
How can I get right data in a cell of JTable when table enter editing
how can I get right data in a cell of JTable when table enter editing
how can I get right data in a cell of JTable when table enter editing
-
I just got my cable company to switch my wireless router to a wired one considering now I have the wireless airport device (the newest one) but now I can't get a wireless signal. The router works when directlyplugged in,the aiport wireless device is green. I've tried going through my new MacBook Pro settings and it the diagnostics check, it says network changes detected, I tell it that it "yes" does connect to a cable modem, it tells me to restart it, after I do it asks if there are any other devices hooked up ( firewall) and when I say no it tells me that it can't fix the problem.
Now I know that I probably have a new IP address because of the cable company switching the boxes but it was working fine with the other box, now there isn't a signal to be had on it!
Please anybody out there that can help!!!??Any time you change networking hardware it is always a good idea to perform a complete power recycle with the new equipment. Check out the following AirPort User Tip. Please post back your results.
-
Can you get your previously purchased ringtones from itunes back when you switch to a new device?
Try here:
iTunes: Error 13019 during sync -
I can't get itunes 11.1 to update or even download
I can't get itunes 11.1 to update or even download on my laptop i have windows 8 and it's a 64bit it just says theres an error everytime.
Oneflesh6511 wrote:
If I buy more iCloud space and back up my phones to that will I still be able to get everything from my iTunes on my phones that way?
Backing up your phone isn't really relevant. You can download items you've already purchased (from the iTunes Store on your Mac) to your phone. If you have items you didn't purchase, e.g. ripped CDs, you would have to subscribe to 'iTunes Match' ($24.99 p.a.) to be able to do the same thing with them.
Maybe you are looking for
-
Just upgrade my MacBook Pro Mid 2010 to Mountain Lion and tried to connect with Apple TV 3th gen. through Airplay and couldn't mirrorring video on my LG Smart TV screen. Just paid US 99.00 for Apple TV plus US 19.99 to Mountain Lion for nothing @?$%
-
Exception condition "COMMUNICATION_ERROR" raised.
Hi Experts, Now Im working with Business graphis. After comple the designing I Tested the Webdynpro Application. It shows Dump like "Exception condition "COMMUNICATION_ERROR" raised". The Error Description is : The URL http://sapecc6ides.ssdomain.co
-
How to pass parameter to the Query String of the Named Queries'SQL
Firstly to say sorry,I'm a beginner and my English is very little. Now I want to know How to pass parameter to the Query String of the Named Queries'SQL in the Map editor. Thanks.
-
2 Subcontractors for the Subcontracting process, how to deal with it in SAP
Dear all I encounter this scenario, please advise how to design it in SAP system for Subcontracting (SC) as it involves 1st subcontracting vendor SC-V01 and 2nd subcontracting vendor SC-V02. I am using the simple example of Colouring Bottom cover and
-
Hi All, I am in the market to purchase a Portable Hard Disk Drive, as I had purchased an EZQ drive that is now DOA. I am interested in the LaCie Rugged line, but I was looking for more storage space for a good price. Any suggestions or help would be