I can't get my iMac (mid 2011) to connect to my tv using a mini dvi to hdmi

How do I get my iMac to connect to a toshiba tv using a minidvi to hdmi cable?

You may need to try a higher quality cable, here is a an Apple article about them and I've had good luck buying Apple's cables and I have had good luck with Mono Price. Try About Mini DisplayPort to HDMI adpaters.

Similar Messages

  • My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. It was working fine now I cant get it to output to the Tv. Any ideas?

    My Macbook pro no longer outputs to my vizio led tv. It was working fine now I cant get any picture. It just says no signal. It is not the hdmi or the adapter because it works fine with my other tv. Any ideas on how to resolve this would be greatly appreciated. Please be as specific as possible. Thanks. BTW--I am using the mini dvi to hdmi adapter in case that was unclear.

    Since you say that the same connectors work on your other TV is suggests that the fault is not in the connectors but your Vizio TV.  I would check the settings on the Vizio TV.  Verify that is is set to receive HDMI input.  Perhaps you or some one else has inadvertently changed them.  Pressing the wrong buttons on a remote control device can do that.  (I am assuming no changes were made in SYSTEM PREFERENCES>DISPLAYS)
    Ciao.

  • Can a MacBook (Early 2008) Support both sound and video to 1080p HDTV by Mini-DVI to HDMI cable?

    Can a MacBook (Early 2008) Support both sound and video to 1080p HDTV by Mini-DVI to HDMI cable?

    The mini dvi on the MacBook will only support video, in order to get audio you'll need to a cable from the sound out port to the sound in port on the TV.

  • My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more.

    My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more. Was working while watching a movie but when I pulled it out from the computer and put it back in the system would no longer mirrorr the screen on the TV.

    The best option is an appointment at an Apple store genius bar.  The evaluation will be for FREE!
    Ciao.

  • Where can i get an iMac 27" 2011 box?

    I'm looking for an iMac 27 inch 2011 model box? Can be original or the box that the refurbs come in.
    I've tried eBay and the Apple store but with no luck.
    Thanks

    I've tried eBay ...
    Try harder:
    http://www.ebay.com/itm/Original-EMPTY-Shipping-Box-for-Apple-iMac-27-Model-A131 2-/310983391807

  • Can I use a mini-DVI to HDMI adapter to use my HDTV as a monitor?

    I've been looking into this and haven't found a direct and complete answer yet. I read this article that states its possible when using mini-DVI to VGA/DVI adapters, but didn't mention mini-DVI to HDMI adapters.
    http://support.apple.com/kb/HT3413
    Apple also doesn't offer mini-DVI to HDMI adapters, so where would be a good place to look for one and what do you think I should pay for it?

    If you have a unibody MBP, you need a mini-Displayport adapter, not a mini-DVI adapter.
    If you don't mind running a separate audio cable in addition to the HDMI cable from your MBP to your TV set, buy this adapter:
    http://www.monoprice.com/products/search.asp?keyword=5311&x=0&y=0
    If you want to combine video and audio into a single HDMI cable, buy one of these two adapters:
    http://kanexlive.com/products/item.aspx?id=3323 (for two-channel stereo audio)
    http://kanexlive.com/products/item.aspx?id=3495 (for 5.1-channel digital surround audio from sources that include it)

  • Having a problem with mini dvi to hdmi.  Can see the background, but must move all screens all the way to the right to see on tv.  Any solutions?

    I'm having an issue with setting up mini dvi to hdmi.  I can connect and see the background picture from my macbook (approx 4 years old) but in order to see any screens or video, I have to move the screen almost all the way off the macbook display to the right.  Any ideas why this would happen?  Also, there is no audio, although when I bought the adapter and cable at the Mac store, they assured me it would handle both.

    You have the display set in Extended Desktop mode. In System Preferences>Displays on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will makethe second monitor your main screen. You can now use your MacBook in ClamshellMode with a wired or Bluetooth keyboard and mouse.  http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
    Or if you want to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box.
    No Mini-DVI adapter can carry audio. The only MacBook that sends audio is the Mid 2010 model 7,1 through a Mini DisplayPort.
    If you connect the MacBook using a Mini-DVI to HDMI adapter you will probably need to use external speakers or a 3.5mm stereo headphone jack to RCA sound plugs connected to a stereo system for audio if your TV doesn't have separate RCA input plugs for audio with the HDMI plug. The Mini-DVI to HDMI doesn't carry audio and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI.

  • I've just hooked my 20" iMac up to my Toshiba 37" HDTV using a mini dvi-HDMI adapter, and works well, EXCEPT for the green tinge (or hue) that is showing up on my TV. Any suggestions or ideas?

    I've just hooked my 20" iMac display up to my Toshiba 37" HDTV using a mini dvi-HDMI adapter, and everything works well, EXCEPT for the green tinge (or hue) that is showing up. Everything else looks pretty good though..... The color that is on my iMac is still good, Its just green on the TV.
    Anyone have suggestions or ideas?

    Try opening the Display System Preferences, then click on the Color options in the Display preferences window that appeared on the Toshiba display. Click on the Calibrate button and follow the instructions for creating a custom ColorSync profile that will hopefully solve the green tinge issue. The Apple Display Calibrator Assistant software that launches when you click on the calibrate button will walk you through the process.Assuming that the green tinge is minor and that you don't have a more serious cable or hardware issue, I am hopeful the results will be worth it.

  • Recently I bought a mini DVI to HDMI converter  from eBay for my iMac 21.5 Mid 2011, but only later I realised that it does not have the mini DVI port in that. How can I connect my iMac to a LG smart TV through a HDMI cable?

    This is the picture of all the ports from my iMac
    This is the mini DVI to HDMI converter which I bought from ebay. And I have the HDMI cable to connect it to my TV
    Could anyone please suggest me a solution how I could connect my iMac to the LG smart TV? Also I need to know if this transmits the audio as well to the smart TV?
    Suggestions are welcomed. I really appreciate and thank you for your time

    I would suggest looking into a Thunderbolt to HDMI connector. In this case, you may be able to use the TV as an external monitor. For this option, please confirm through additional research. I have not tested it personally.
    You can also use an Apple TV, which connects with HDMI. In this case, you can use Airplay Mirroring. Not all Macs support Airplay Mirroring, so you need to check first. I have a Mid-2011 27" iMac, and it supports Airplay Mirroring. I don't use it often because my TV is in another room, but I just tried it and it worked. It had to change the screen resolution to work well, so I don't know if I would want to use it as my day to day monitor. http://support.apple.com/kb/ht5404

  • How do I get my iPhoto library from a ppc g5 to an intel iMac mid 2011

    How do I get my Iphoto library from a ppc g5 to an intel imac mid 2011?

    I recommend tha tyou do not use migration assistant - it has a poor record of moving the iPhoto library successfully
    Connect the two Macs together (network, firewire target mode, etc)  or use an external hard drive formed Mac OS extended (journaled) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
    LN

  • HT4854 I bought a new mac including 10.8 ML. How can I install 10.8 on my older iMac (mid-2011) with 10.6?

    I bought a new mac including 10.8 Mountain Lion. (How) can I now install 10.8 on my older iMac (mid-2011) which came with 10.6?

    You will need to buy it at the app store. The license for the pre-installed OS on your new machine is only for that machine. Only OS's purchased from the app store can be installed on more than one machine (as long as you own it).

  • I have a imac mid 2011 model, why can't i connect to airplay?  And the airplay icon does not show in the menu.

    I have a imac mid 2011 model, why can't i connect to airplay?  And the airplay icon does not show in the menu.

    Hi there cjperido,
    You may find the troubleshooting steps in the article below helpful.
    iTunes: Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/ts5209
    -Griff W. 

  • Win 8 pro to win 8.1 pro on Imac mid 2011

    Hi Community!
    I'm experiencing the same issue as this thread https://discussions.apple.com/message/23429321#23429321
    But it's on my Imac mid 2011.
    I had windows 7, I upgraded with a windows 8 succesfully but when I want to update to 8.1 I have a black screen at the end of the installation (no lights) exactly like the computer is Off. When I reboot it restore to win 8
    So I decided to restore windows 8 with a fresh install (all programs and files deleted) and bootcamp 5 installed before.
    I have the same issue , I thought the problem was because of one of my drivers.
    But even with a brand new Win8, with last update, The update 8.1 give me this **** black screen!!!
    I tried with last AMD HD drivers in case it was the graphic drivers.
    I really don't understand what happen!!
    I have two sort of error code when It restore to win 8
    0x1900101 - 40019    or  0x1900101 - 4000D
    Does anyone have a successful update to win 8.1 with an Imac mid 2011?
    I try to install with a complete win 8.1 DVD (no update) I will work?
    thanks for your help

    Well, I have finally figured "my" issue out.  For me, it was the video driver for my 6970M adapter.  The real kicker is that the driver provided by Microsoft during the windows installation which correctly identified my device was NOT compatible with 8.1  The driver provided by Bootcamp driver installation was NOT compatibile either. 
    Basically, you have to uninstall the display adapter and have "delete the driver" box checked in device manager.  Leave it like that, do NOT reboot and install 8.1  The incompatible driver will put itself back on there again but, at least you'll be able to get into 8.1.  You just have to uninstall that device again and go to AMD directly for the latest driver.
    So, below is a more step by step of how I got my 8.1 passed the black screen issue.
    I did a clean install of Windows 8. 
    During the installation process, select customize settings and turn OFF automatic windows updates AND turn OFF automatic driver updates.
    Once at the desktop, uninstall the device AND device driver (display adapter).  Do NOT reboot.
    At this point I had to do windows updates to get 8.1 to show up in the windows store.  However, if you have to do this, UNCHECK any driver related updates first.  It will tell you to reboot, go ahead and do this.  Once back at the desktop, go into device manager and make sure the display adapter is uninstalled/driver deleted or its at least the microsoft generic adapter.  The point is to make sure no device specific adapter is installed. 
    Proceed to install 8.1.  Let it go through its reboots and setup.
    Once at the desktop of 8.1, go into device manager and see if the generic driver is there of it its a device specific driver, uninstall the device/driver, do not reboot.
    Go to AMD (my display adapter maker) and get the latest drivers from them directly and make sure its for 8.1
    Install that driver and reboot.  It should work from there on out.  You can then proceed to install other devices and bootcamp drivers.
    This is what I had to do for my black screen problem.  Its important to note that the black screen issue is common but being caused by a variety of issues.  I was on the phone with Microsoft this morning and explained all of this and my steps that were taken.  Its clear MS has a bad update package especially since 8.1 isn't playing well (causing black screen) with drivers that Windows itself installed during install.  My fix may work for some, but not all.  I hope it helps someone.

  • How can a get my iMAC to recognize a newly installed optical drive?

    I recently ordered a new Optical drive for my iMAC 12,1 to replace a damaged one. I followed the instructions online to replace the drive with no issues. I restarted the iMAC and it will not recognize the new optical drive. The optical drive won't accept any disks either. The optical drive is
    Model GA11N
    Manufacturer: HL
    Condition: Brand New never used, without original manufacturer packaging
    SATA interface, Slot-in loading, 12.7mm in height, without faceplate, no eject button. 1 Year Warranty
    with Apple Logo, Special for Apple iMac Intel 20" EMC 2266 A1224 21.5" 2308 27" 2390 2309 2374 Mac Mini Mid 2010
    Write Speed: DVD-RAM :5X DVD+R :8X DVD+R DL :4X DVD-R DL :4X DVD+RW :8X DVD-R :8X DVD-RW :6X CD-R :24X CD-RW :24X Read Speed: DVD-ROM/DL: 6X CD-R:24X CD-RW: 24X CD-ROM: 24X
    How can a get the iMAC to recognize this new optical drive?

    Here are some sources for Mac compatible optical drives that wiil work with your 2011 iMac.
    http://eshop.macsales.com/item/OWC/VLU2SD24XS/
    http://eshop.macsales.com/item/OWC/MR3F82SD24S/
    http://www.amazon.com/Aluminum-External-Super-Drive-Apple--MacBook/dp/B007FUDKB4 /ref=sr_1_1?s=electronics&ie=UTF8&qid=1392328000&sr=1-1&keywords=mac+compatible+ dvd+drive
    http://www.amazon.com/External-Super-Drive-Apple-MacBook/dp/B009XON646/ref=sr_1_ 3?s=electronics&ie=UTF8&qid=1392328066&sr=1-3&keywords=mac+compatible+dvd+drive
    http://www.amazon.com/LG-Electronics-Portable-External-GP40NB40/dp/B009DS6OFU/re f=sr_1_8?s=electronics&ie=UTF8&qid=1392328138&sr=1-8&keywords=mac+compatible+dvd +drive

  • Can I upgrade my 27in Mid 2011 2.7GHz's graphics card?

    Can I upgrade my 27in Mid 2011 AMD Radeon HD 6770M 512 MB 2.7GHz's graphics card to a AMD Radeon HD 7770 GHz edition? If its possible that would be great.If any one can answer please do because i need to know.

    You maybe able to have Apple techs install one of these GPUs.
    1 or 2 GB GDDR5 (Radeon HD 6970M)
    Assuming Apple can still get the GPU, you can have them replace your current GPU, but the costs of the replacement will be out of your pocket.
    It will be a few hundred Dollars to have them do the replacement.
    AppleCare doesn't cover the costs of  upgrading/replacing existing/original components. Only free replacement and labor of existing hardware.
    This is NOT something I recommend a novice or newbie Mac upgrader try as the newer aluminum iMacs are very details oriented and are tedious and finicky to work on and upgrade.
    Lots of different fasteners, and small cables that can be damaged if one is not careful.
    DIY work on a newer iMac is a task for even seasoned Mac hardware upgraders.
    And if you do decide to try this on your own and you, inadvertently, "brick" your iMac, you'll be on your own.
    You won't be able to have an Apple store repair what you have done . Apple will not be able to help you and repair the damage that could happen.

Maybe you are looking for