I can't get my iPhone 4 to turn on.
I was using my iPhone 4 this morning. Put it down for 30 minutes, went back to it and got a black screen and can't get it to turn on. Help!
Reset it:
Press the Sleep/Wake button & Home button at the same time, keep pressing until you see the Apple logo, then release.
Similar Messages
-
I can't get my iphone 4 to turn on. how do i turn it back on?
i can't get my iphone 4 to turn on. how do i turn it back on?
Press and hold the Sleep/Wake button and Home button for 10 seconds. Does it power on?
-
My iPhone went totally dead for no apparent reason. Any suggestions to trying to turn it back on? The battery i(was) charged. Nothing happens when I plug into the charger, nor whn I depress the on/off button on the top of the phone. It does no appear on my comuter screen when connected to iTunes.
Connect to Wall Charger again and Reset, hold both Home and Power buttons until the iPhone begins to start. This can sometimes take about 20 seconds of holding both buttons.
-
I seriously have tried everything, from turning it on to plugging in the charger... It WON"T TURN ON and I am freaking out.
RESET DEVICE
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost). -
I've forgotten my passcode and can't get into the phone to turn off "find my iphone" in order to restore it... Can anyone help?
If you know the password to your apple id login - you can then do a restoration once you have put your device into recovery mode using itunes.
read this article to give you direction how to put your device into recovery mode.
Once you have put in your apple id login and password this then will allow you to restore the device once the device is placed in recovery mode.
good luck!
http://support.apple.com/kb/ht1808 -
How can I get my iPhone 6 to stop prompting me to enter my wife's Apple ID when updating apps? I have verified in settings that my acct is listed in itunes & App Store, as well as icloud. i can download new apps fine. Have shut down phone and re-powered, have tried plugging into my iMac while signed into my iTunes acct. Can't figure out what to do next?
Is the comp a synced device to your apple ID and approved as an active device for this synchronization?
Just cloud the sync once, activate the comp to your apple I'd in iTunes, ensure all software is up to date, turn on home sharing between the devices and you can reinstall the apps from the apple id purchase history via download.
You basically cleaned out the canonical data apple uses to validate all that, which was backup data. Like iOS devices have the purchased option on the App Store now, syncing the devices via the home sharing and properly activating them will give your comp the purchased cloud and free up 10gs of space on the precious solid states smaller drives.
Hope that helps...
If you need to know the menu to find this info, let me know. But the info is easily accessible in the help menu. -
I bought a new laptop because my old laptop got lost,how can i get my iphone to synchronize with my new laptop?
Have you transferred your iTunes library from your computer's backup to your new computer along with all other important data such as documents, photos, etc.?
-
How can i get my iphone, from the disable mode
how can i get my iphone 3gs, out of the disable mode?
If your phone is disabled because you forgot your passcode, restore the phone on the last computer it was synced with. If you do not have access to the last computer it was synced with, you will have to force it into recovery mode & restore as a new device. See http://support.apple.com/kb/HT1212.
-
Firstly, I can't open iPhoto on my macbook as of a few days and could it have anything to do with a problem I have updating my iPhone's software as I've downloaded extra iCloud storage but I still can't get the iPhone to recognise the space for software
No. With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what do you see when iPhoto opens?
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
For the iPhone issue ask in the iPhone forum.
OT -
My iPhone is locked due to setting up a passcode after loading new version 7. I have tried to reset but keep getting turn of "find my iphone". I can't get into the phone to turn this off. What do I do now?
Try this - http://support.apple.com/kb/ht1212 - also you can sign into www.icloud.com and remote erase the phone
recovery mode restore as descibed in HT1808 might be your last resort though -
FOUND THE ANSWER!!
Apparently when you plug your iPhone in to your computer, Windows will "sometimes" install the drivers as a camera, putting them in the wrong place. This is why it will pop up in Windows so you can take photos off, but iTunes can't see it. SO, what you have to do is move the driver file (USBAAPL.SYS) to the correct location. Follow the directions I found below & your iTunes should be fixed (worked for me):
What works is to just force the drivers on what windows thinks is a camera, i.e. to ‘update’ the device to use the correct driver. There are some hints on how to do this already listed on this forum, but I’ll try to give some more detailed information:
1. First off you need to have iTunes installed and the ipod touch plugged in
and recognized as ‘something’ e.g. digital camera (it shouldn’t really
matter what it’s recognized as, but it needs to be found by windows).
2. Search for usbaapl in the C:\WINDOWS system folder:
o open windows explorer (e.g. Right-click Start and then click ‘explore’)
o right-click the WINDOWS folder and select ‘Search’).
o type in usbaapl and hit Search – try to ignore the dog!
You should find the driver info in a sub folder of
C:\WINDOWS\system32\DRVSTORE e.g. C:\WINDOWS\system32\DRVSTORE\usbaapl_A65621D65F5B7 507DD7B22331826547BDD2D206B
Remember that location (either leave the search box open or copy the folder
name into note pad – you’ll need it later)
If you don’t find usbaapl.sys, usbaapl.inf etc. then your drivers have not
been installed with the iTunes install and you’ll have to reinstall iTunes.
3. Locate the ipod-camera device:
o Open the device manager, e.g. using Start > Control Panel >
Performance and Maintenance > System > Hardware Tab > Device Manager
o Look for a device called ‘ipod’ - if your ipod shows up as
‘digital camera’ it will be under something like ‘imaging devices’.
4. Update the driver:
o Right click the ‘ipod-camera’ in device manager and click on
‘Update Driver’ – the Hardware Update Wizard will open.
o Check the ‘Install from a list or specific location’ then click ‘Next’
o Check ‘Search for the best driver in these locations’. Un-check
‘Search removable media’ and check ‘Include this location in the search’.
In the text box below type (or better copy and paste) the folder
containing the ipod driver information found in step 1 (in the example
above it was C:\WINDOWS\system32\DRVSTORE\usbaapl_A65621D65F5B7 507DD7B22331826547BDD2D206B),
then click Next.
You should now see something like ‘Apple ipod device driver’ or so. Continue
installing that device. Once the driver has been installed the ipod will come
to life and iTunes (if you have it open) will show it.
If for some reason this doesn't work, try downloading the file here:
http://www.runscanner.net/files/sys...sbaapl.sys.aspx
And putting it here:
C:\ WINDOWS\ system32\ drivers\ usbaapl.sysIt's still not working. I went through every step and still can't get my Iphone to show up on my itunes.
Though I did find that the USB driver is not listed under any devices... -
I can't get my iphone or ipad to come up as a device on iTunes on my computer
I can't get my iphone or ipad to come up as a device on iTunes on my computer please help as I've just got the new iphone and can't get my stuff on it.
Hey Jimbaloo1!
Here are a couple of articles that can help you with this situation:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
Thanks for using the Apple Support Communities!
Cheers,
Braden -
This is a stupid question but I needed to ask because I don't want to go there and not being able to buy it, but can I get the iPhone 5 brought straight there when I go to an apple store?
And I meant go to the apple store physically without preordering it online, and I meant the Southampton one. So could I just stroll in apple store and buy a iPhone 5 in Southampton apple store and buy the iPhone 5 straight away? Because I didn't want to have to wait? I just want to go in and buy it and go out with it, if you guys get what I mean? And felipeV if it is in stock could I just buy it and leave with my iPhone 5?
-
HT204587 HOW CAN I GET MY IPHONE 5S TO APPEAR IN ITUNE?
How can i get my iphone 5s to appear in itunes?
Hi there dashingt,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W. -
How can I get my iPhone 5s to work in my 2015 outback
How can I get my iPhone 5s to work in my 2015 outback?
I Tried that and I can get calls out and in but no messaging.
AWindow opens and says this feature is not supported on this device
my iPhone 4 worked fine is it my iOS?
Maybe you are looking for
-
Error : 'No object identification permitted for infotype 0582, subtype LTA'
Hi Experts, While executing the program 'HINUINFO_UPDATE' i am getting an error 'No object identification permitted for infotype 0582, subtype LTA'. After the approval for LTA claim is done in ESS i have executed the pr
-
How to create tomcat user and directory structure
I am new in using tomcat, recently installed tomcat 5.0 but don't know how to use it and how to view sample jsp pages. I tried tomcat_users.xml file to create user, but anybody knows the different roles used there? if yes, olease provide. Thanking yo
-
Cant get my iPad to connect to iTunes, please help
I connected my iPad2 to the computer (MacMini version 10.5.8) , opened iTunes and got the message that for an unknown reason my iPad does not connect. Anyone know how to fix this please?
-
Setting $PATH using the terminal
Hi All! I am a newbie with OS X and I am wondering as to how to add a directory into the PATH using the terminal. Thank you very much!
-
Dynamix CRM 2013 Database for test
Hi, i 'm beginner in dynamic crm, i use now dynamic 2013 and i need a database (contains informations ) for test, thanks. Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP]