I can't get my PC to use Illustrator CC (2014) as the default program to open .ait or .eps files.

When I try to set Illustrator CC (2014) as the default program to open certain files, such as Illustrator templates (.ait) or .eps files, my PC will not allow me to choose Illustrator. I've tried asking it to use the shortcut & also by going into my folders as follows:
C: > Program Files > Adobe > Adobe Illustrator CC 2014 > Support Files > Contents > Windows > Illustrator
Anyone know how to fix this?

Search here for all things Windows http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US

Similar Messages

I can't make ADE the default program to open EPUB and MOBI files

Hello, I can't seem to be able to make ADE the default program to open EPUB and MOBI files. I use Windows 7. I used to use a Firefox plug-in to view these files, and before that I used Calibre. I have been told that these are both inadequate. When I go into the Control Panel to change the default program to open these files, however, ADE is not listed as one of the possibilities (only Firefox and Calibre are), and when I search it just brings up Adobe Acrobat. Any advice? Thanks, Bill.

I think I have answered my own question. This time I clicked on Browse for the program to set as the default, and I selected the Downloads program, and there it was. For some reason I had to re-install it several times, and it kept re-installing and re-installing. But all seems to be OK now.

Question: how can I tell Bridge I want to set PS CS5 as the default program for opening .psd files

How do I change a specific file type association in Bridge CS5, namely the .psd file type? I had installed Photoshop CS6, but am unable to use it due to extreme slowness (another problem, not for this question). I have reverted to using Photoshop CS5 and Bridge CS5.
Now when I double-click on a .psd file in Bridge CS5 to open it (or right-click on the .psd file) , the file opens up in the glacially slow CS6. I went to edt>preferences>file type associations to change the association to Photoshop CS5, but .psd is not listed as a file type (.jpg and .dng and a host of other file types are listed). How can I change the association if I cannot find the file type? (BTW: I have changed the file type association in Windows Explorer; I am running Windows XP.) I know I can open PS CS5 manually and scroll to the image I want to open but, to my mind, that defeats one of the main purposes of Bridge.
Any advice you can offer would be gratefully received.
Thank you.
Heather

Adobe Bridge >> Preferences >> File Associations
This is mac screenshot, but should be in same place.
Win 7 works very goo on my home computer, much better security. One problem myslef inlcuded have had is files permissisons, especially on external drives, and you have to dig to china in the menus to fix it, or else you can't save over the same file name. So if you plan on upgrading do it on a day you can troublshoot to fix that annoyance, though at this point might be good to wait for win8.

When I try to change the default program for opening a specific file type The "Always use the selected program to open this type of file" does not highlight.

I can not therefore change the default program. How can I get this to highlight?

Hi Swansong,
It is also possible to [[Set how Firefox handles different types of files]]

How can I change the default program to open Pages files in Finder from Pages 5.0 to Pages '09?

I’ve tried. It seems Mavericks can’t tell the difference between the programs or won’t let me.
Message was edited by: WWGreaves

Open DIsk Utility and in the toolbar select Disk Image. The file selector will open and you'll have to do three things: 1) just as with any file, name it and point the file selector to where you want it to be saved, 2) near the bottom you'll see name - type iWork 2013 and 3) below that select the image size. Click on size, choose custom and type 1500 MB then click on the Create button.
Some time will pass and then you'll see an external disk pop up on your desktop and/or the Finder window sidebar. Drag the three programs into it and eject it like any other external disk. Now delete the programs from your applications window.
Where ever it was you pointed the file selector to you'll see the file you created. Double click on it and the disk image will mount again.

In "Open with" I chose the program from the list and mark "use always the selected program to open this type of files" it asks for it time after time, every time

When I want to download, by exmple, a picture included in a mail .

See "File handling in Firefox 3 and SeaMonkey 2"
* http://kb.mozillazine.org/File_types_and_download_actions

I have an ipod shuffle 1st generation it will work if i connect it to my usb port in car or on computer but i can not get it to work using just headphones what coud be the reason for this

I have an ipod shuffle 1st generation. it will work ousing usb port in car or on computer but i can not get it to play using headphones. what would be the reason for this.

Sorry for the typos, I hope my message still gets across!

Unable to find my Microsoft Office 2010 to use as a default program to open documents. How to...

I want to use my Microsoft Office 2010 program as the default program to open document. When I browse for the program a follow the path, I end up without a program to select. Where do I find the correct path to be able to choose it as the default program?

blackfoot wrote:
My old computer had microsoft word, office , etc. . How do I find it on my new computer or how do I go about getting it?
Microsoft Office is not a free program, you have to purchase it.
Some new PCs may have Office as a free trial, but when the trial is over, you will need to purchase it.

How do I open a TIF image email attachment using windows photo gallery as the default instead of microsoft office picture manager?

I have an internet fax program that sends faxes directly to my email as a TIF image attachment. When I download the attachment it lists Microsoft office picture manager as the default program to view the image. I would like to change the default program to view the image to Microsoft photo gallery. How do I change the default program to open an image attachment in firefox? Thank you

OK I have it figured out! I was using google mail. For what ever reason the imac/pc safari using google would not display the PDF in the email even though the ipad/iphone did. I tried a different mail system through work (not google mail) and it EVERYTHING works GREAT!!!!! Wow, a lot of wasted time over something that was actually working.

Can't get Apache to work using WAMP or XAMPP

My system:
iMAC
Mac OS X: Version 10.5.6
Processor: 2.16 GHZ Intel Core 2 Duo
Memory 2 GB 667 MHz DDR2 SDRAM
I have over 75 Gigs available on my Mac HD and nearly 40 Gigs left on my external HD used for Time Machine
Hello! I cannot get Apache to start after loading up WAMP (I also tried using XAMPP, but with the same result). This is driving me crazy. I am starting to build my first Joomla site and I have Joomla succesfully loaded onto my server site, but because of the Apache issue, I can't load Joomla onto my local server.
This is what is going on:
have successfully loaded MAMP and MAMPro. This is a fresh reload as of today. When I go to start the MAMP, I get the following message with regards to Apache:
(28)No space left on device: mod_rewrite: could not create rewriteloglock
* Edit post
* Report this post
* Reply with quote
I found this page on the web:
http://www.ehow.com/how4397601error-n ... evice.html
I got brave and went into the root using terminal.app. After following the instructions on that page as best I could, there did seem to be a lot of semapores (maybe 50+), but how to delete them was unclear to me on that page. I tried to follow Step 2 by copying this line and pasting it into the terminal prompt:
ipcs -s # grep apache # perl -e ‘while () { @a=split(/\s+/); print `ipcrm sem $a[1]`}’
but it was pretty unclear if I was doing it correctly and there seemed to be no real result. I got too nervous working in terminal to try to continue the instructions on how to delete them, so I got out of terminal and decided to see if there was anything else that might help.
After being in there, I tried to run Apache from MAMP, and, once again, I got the same error. I then found this site:
http://www.devarticles.com/c/a/Apache/U ... -Mac-OS-X/
I did type in "localhost" in the browser, and it DID show apache running with the confirmation window looking exactly as in the article. I then follow the instructions back to terminal.app and did the following command:
sudo pico http.conf
just as in the article, I found these four lines shown exactly like this:
#LoadModule php4_module
#AddModule mod_php4.c
#AddType application/x-httpd-php .php
#AddType application/x-httpd-php-source .phps
however, there were so many warnings about making and changes and such that I decided NOT to eliminate the # sign as the article recommended and just got out of terminal.
The thing is this. Under MAMP, everything seems to be running EXCEPT Apache. However, when I type "localhost" in the command line of my foxfire browser, Apache seems to be running fine.
On another forum, where I have posted exactly as above, the response was:
I cannot reproduce this behaviour even though i have the same osx version and hardware configuration. But I found this site, it may help you to solve the problem:
http://carlosrivero.com/fix-apache---no-space-left-on-device-couldnt-create-acce pt-lock
The script you've used is not correct, the # symbols have to be replaced with pipes | to execute the commands one after another. You should execute this as admin using "sudo" followed by the commands. You also have to replace "apache" with the user name under which apache is currently running. For MAMP Pro that is either "www" or your user name:
This will list all active semaphores of the user "www"
Code: Select all
sudo ipcs -s | grep www
This one should remove them (at least it one runs without any errors)
I tried this but I'm afraid that I am still having the exact same problem. In fact, I unloaded MAMP and then tried XAMPP, which also didn't work. I tried to follow the directions above, but I'm so unfamiliar with how to do terminal in Mac, that I'm really not sure that I'm doing things correctly, or that I'm even addressing the problem. I have Joomla uploaded and ready to go on my server site (godaddy.com), but I really wanted to use my localhost to build the site offline.
I've tried uploading joomla to MAMP as it exists, but when I go back to my browser with http://localhost/
I still just get the apache confirmation page - no Joomla. Maybe part of the problem is that I'm still not completely clear on how to execute the instructions as above had them in terminal. I don't get what they meant by code: SELECT ALL.
I don't know what they mean when they say, "You should execute this as admin using "sudo" followed by the commands. You also have to replace "apache" with the user name under which apache is currently running. For MAMP Pro that is either "www" or your user name:"
how do I know what the username is for apache? How do I know what my username is? I know that these are basic questions, but I have never had to do this before and I don't know where to find the answers. I simply copied and pasted into terminal EXACTLY what it was posted. It really didn't seem to do anything.
Oh, and right now, as I write this, if I click on
Open start page
from MAMP, a browser window opens with the following:
Failed to Connect
Firefox can't establish a connection to the server at localhost:8888.
Though the site seems valid, the browser was unable to establish a connection.
* Could the site be temporarily unavailable? Try again later.
* Are you unable to browse other sites? Check the computer's network connection.
* Is your computer or network protected by a firewall or proxy? Incorrect settings can interfere with Web browsing.
So, I'm at a loss of what to do next. I can work on joomla through godaddy, but I would prefer to work on my localhost. I am very discouraged that I am hung up at such as basic level and can't get started. I do have Mac ProCare, but the Mac store is quite a ways away, and I'm not sure how they could help solve this problem.
Please lead me through a solution to this.

Ok, first thing, why are you doing anything with WAMP or XAMPP when you're running a Mac? MAMP should be what you want unless you're not explaining part of what you are trying to do.
2nd thing, I haven't used MAMP in a while, but there are two possibilities for not seeing what you want to see once you have MAMP turned on. One possibility is that you already have "Web Sharing" turned on in your Sharing Preference Pane. If that is the case, port 80 will already be taken and you'll be seeing the default Apache install (files are stored at /Library/WebServer/Documents/). This would push MAMP to either not turn on it's web serving capabilities, or to push it to another port. The other possibility is that MAMP defaults to another port anyway. So instead of localhost, you might have to type in localhost:8080 or something similar. I believe the control panel that gets installed can take you to the currently MAMP-served page, and it can also help you change which port your serving on.
80 is the default port for web serving and the ONLY port that will let you get straight to the server without having to type in webaddress.com:port# instead of just webaddress.com.

How can we get ADFSecurity work when used in OC4J, OID and OAM?

I am getting error in http server log "mod_oc4j: Response status=499 and reason=Oracle SSO, but failed to get mod_osso global context."
But I am not using Oracle SSO and my client doesn't want to use it either, I am using OAM SSO(CoreIDSSO) in my configuration. Please read the details below.
I am using ADFSecurity in an app that is protected by OAM. To migrate ADFSecurity permissions from
system-jazn-data.xml to OID, I used JAZNMigrationTool to populate OID with Grantees and Permissions. OAM gives login page, and authentication works fine.
But ADFSecurity is not working. ADFComponent Delete button is enabled even for roles that dont have permissions for the iterator delete.
- The app works fine when I use without OAM. ADF Security permissions work fine.
- The app works fine when used with OAM, but with ADFSecurity disabled (enforce=false).
- When I enforce ADFSecurity alongwith OAM, ADFSecurity is not working.
In the doc "Oracle Containers for J2EE Security Guide b28957", there is a mention of use of CoreIDPrincipal for permissions. Our OID Permissions entries show
LDAPRealmRole for attribute orcljaznprincipal. I am not sure if this could be the reason.
We have configured AccessServerSDK for the SOA instance and have policy for the urls in the policy manager. We have entries in orion-application.xml, orion-web.xml and system-jazn-data.xml as per the documentations.
How can we get ADFSecurity work when used with OID and OAM?

Have you been able to successfully integrate OAS with OAM & OID? We have similar requriement and so far we have not been able to get it working.
We have application specific roles which we map to OID roles using orion-application.xml.
Any pointers to achieve this would be greatly appreciated.
thanks,
Dipal

Than how can i get java class by using it's class file?

Hi
After compilation of a java program, it creates a class file.
After getting class file suppose class file has been deleted.
Than how can i get java class by using it's class file?
Thanks in advance.

get a decompiler and run your class file through it--I'll assume you want the source code back and that you are not trying to recover a missing class file by attempting to use the class file that is missing--if it's missing, then I've not a clue on how to get it back by using what is already missing.
BTW: many of your compilers have source control--if it does, just restore your missing file.

Is there an issue going on with the iPhones? And iPads? I cannot send text pics. I can't get on Facebook, and I can't get on anything that uses Facebook ex Slotomania. This has been going on for a few days!!! It is happening with and without upgrades.

Is there an issue going on with the iPhones? And iPads? I cannot send text pics. I can't get on Facebook, and I can't get on anything that uses Facebook ex Slotomania. This has been going on for a few days!!! It is happening with and without upgrades.

Contact facebook to address the facebook issues.

How can I get Firefox to NOT use DDE? If I uncheck it in Windows XP "Folder options" it keeps getting re-checked. When checked, it takes minutes to get Firefox to open on a page linked from Outlook.

How can I get Firefox to NOT use DDE? If I uncheck it in Windows XP "Folder options" it keeps getting re-checked. When checked, it takes minutes to get Firefox to open on a page linked from Outlook.

Open link/bookmark in new tab in same window:
*Middle-click (press the mouse scroll wheel) the link
*Ctrl+left click the link
*right-click the link, choose "Open Link in New Tab"
Open link/bookmark in new window:
* Shift+Enter on the link
* Shift+left click on the link
See: http://www.7is7.com/software/firefox/shortcuts.html

How can i get apps with out using credit card info because i do not have a card ?

how can i get apps with out using credit card info because i do not have a card ?

Yo Chris. I've been following your answers to different threads and quite frankly, you're very keen in answering everybody regarding this stupidity that Apple has brought upon its customers. Kudos to you. But the problem is, most of the time, in some devices, your solution doesn't work because the NONE option is not there. The same goes for me.
Meanwhile, I found a temporary workaround for the iPhone 4s, iPad 2 and iPod Touch 4th Gen.
Register a free Apple ID from the iCloud Settings.
Go to Settings>iCloud>Account>Tap Payment Information on the Storage Plan Category.
Fill in the other boxes and choose "None" on Credit Card Information.
That's it! Hope I helped those who still couldn't find the "None" Option.
Must be running IOS 5.0.1 though, else there would be no iCloud.

I can't get my PC to use Illustrator CC (2014) as the default program to open .ait or .eps files.

Similar Messages

Maybe you are looking for