I can't get my phone to connect to wireless printer

My iPhone 4 used to print to my wireless printer just fine.  Now it will not print at all.  I don't know what changed or how to fix it.

Try resetting your iPhone by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
Also try power cycling your wireles router and your printer... turn them off for 30 secs and then back on.

Similar Messages

  • I had to reset my computer and redownload Itunes. My iphone 5 will not connect to the new itunes i have trusted the computer but it keeps bringing up the same question each time i reconnect to the computer. How can i get my phone to connect to itunes

    I had to reset my computer because of a virus i had. When i re installed itunes my music was gone. I went to plug in my Iphone 5 and know my phone does not recognize the computer. I also have hit the trust button on my iphone but have to continue trusting the computer each time it gets plugged in. Still the phone wont connect to itunes at all to view what is on the phone. How do i fix this connection problem?

    Hey ebe301,
    Sorry to hear about your troubles with your PC. If you are not seeing your iPhone on your computer, then take a look at the link below to walk you through getting that working again. It will have you verify that drivers are installed and working as well as any third party software that may be causing conflicts. 
    iPhone, iPad, or iPod not recognized in iTunes for Windows
    https://support.apple.com/en-us/HT204095
    Take care,
    -Norm G.  

  • I can't get my phone to connect to itunes when i plug it into the computer, help?

    iTunes doesn't pop up when i plug my phone in and it doesn't show that my phone is connected, so i can't put any music on my phone now! help please!

    Hello Kayla,
    Thank you for the details of the issue you are experiencing with your iPhone not appearing in iTunes.  I recommend following the steps in this article to troubleshoot the issue you described:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Can't get older mac to connect to wireless router

    I have an older G4 mac, which had an Airport wireless snow type of router. I've currently upgrade to an iMac with an Airport Extreme router. I can't get the old G4 to 'see' the Airport Extreme Network, so I can use the other computer to check email and get on the internet. Do I have to load in the same Airport software on both machines? Any help will be appreciated.

    On my G4, I have the software installed which I used when setting up my other wireless router, the snow M8440. Could this be the problem?
    Yes. Let's take a step back. You can use any computer to configure your new Airport Extreme, but first be sure you have installed the Airport Utility program from the link I posted above. The earlier version of Airport Utility you used for your Snow Airport doesn't have the necessary features to configure your new Airport Extreme.
    The only reason to keep the old Airport Utility program would be to configure your old Snow Airport Base Station, which you're not using any more. So put it aside.
    Since you're having trouble getting your G4 to connect at all, it makes sense to use your new iMac to configure your new AirPort Extreme. So let's use it for now.
    The ability to use the dual band feature of the new Extreme is described starting on page 20 of the following: Apple Airport Networks (early 2009). The document is very lengthy but don't let that bother you - Apple's Airport base stations are extremely versatile and the manual gets very detailed, but most of it won't concern you.
    I made a wireless network named Airport Extreme on my iMac.
    The way you worded this concerned me, so at the risk of sounding Presidential, "let me be clear"
    Technically, you don't want to create a wireless network on your iMac - the wireless network with which you want to connect is created by your Extreme, and you use Airport Utility to make that happen.
    Your Airport icons on all your computers should look like one of these:
    If it looks like this:
    then you have created a "computer to computer network". You don't want that.
    Next: the passage of the Apple Airport Networks manual above also describes how to set up your Airport Network's wireless security...
    I click on the Airport Extreme, the next window comes up with Wireless Security: WEP password. I type in my password I used to set up the Airport Extreme network, and get the following error message: There was an error joining the Airport network "Airport Extreme". ...
    I advocate using no security at first, to eliminate one roadblock when first configuring a network. After everything works, set up WPA or WPA2 Personal. I'm reasonably sure your G4 supports it. The older WEP protocol is no longer considered secure - it amounts to "feel-good" security.
    I trust this gets things pointed in the right direction. If you're still stuck write back and we'll get you un-stuck. Your G4 will work with your new Extreme.

  • How can I get my Mac to detect my wireless printer?

    I recently upgraded to yosemite and my Mac no longer recognizes my canon pima printer (wi-fi connection). I deleted the printer on the printer list after I received a connection error with the intention of adding it back and now cannot get my Mac to detect the printer to add it. I installed the updated driver from canon's site. Thank you for your help.

    Hi CountyLineDesignLLC,
    I see that you have some questions about troubleshooting a wireless printer after updating to Yosemite. Here is an article for you that should be able to help you achieve this goal:
    Troubleshooting printer issues in OS X - Apple Support
    http://support.apple.com/en-us/HT203343
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • Can't get HP 3050A to connect to wireless router

    Hi,
    I've recently switched from Comcast to AT&T and I cannot get my printer to connect to the new AT&T router. I've gone through the same steps as far as holding down the WPS button and what have you that it states to do on the printer but it just "times out" and won't connect. I had no problem connecting wirelessly when I was using Netgear router and Comcast. Now it won't connect and it's very frustrating. On top of that, I cannot find my printer install CDs. I haven't needed them before, but I have no idea what to do now. Please help. Thank you!
    Darryl

    Hi Darryl,
    I did a little digging, and I have some bad news. I received this information from a Mac subject matter expert regarding this printer in combination with Mavericks:
    The ASU driver does not include a Wi-Fi Setup option. This means, a wireless installation in Mavericks is only possible if the printer is already setup up for the network.
    Unfortunately, this means that unless your printer was already set up on your current wireless network, it can't be set up on a new or different wireless network without a full feature driver. Furthermore, this printer does not have a full feature driver beyond OS X v10.8 Mountain Lion.
    This might not help, but this printer can be set up on a new wireless network for Windows XP, Windows Vista, Windows 7, Windows 8, Mac OS X v10.5 through OS X v10.8.
    For Mavericks, it looks like a USB connection is the only way to print.
    -- ReverseTalk
    I work on behalf of HP.
    Click the thumbs up + button if I have helped you. Mark Accepted Solution if I solved your inquiry.

  • Can't get apple tv to connect to wireless

    I've tried restarting, disconnecting and reconnecting. I've tried lowering the resolution, I've tried everything. My macbook connects fine. HELP!!!!

    The details that can be provided in answers are limited by the details provided.  And since almost no details were provided there are not really any specifics that can be given. 
    Are you sure you are entering the WiFi user name and password into the WiFi interface.  ATV has a lot of different types of user ID's (WiFi, Home sharing, iCloud, Photo stream, etc.) for it's differnt services. 
    What happens when you try to enter your user ID and password?  Are you seeing your WiFi network on the list?  Are you sure you are connecting to YOUR wifi network and not someone else's?

  • How can I get another phone to print on my printer

    how can I get another phone to print on my printer

    Which printer?
    Which Phone?
    What connection type?
    Please add some more details and then we will be able to assist you.
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HT5569 I am unable to get my iPhone 4S to connect to any wifi connection, I have reset my phone as well as visitedn my cellular provider without success. Does anyone know how I could possibly get my phone to connect to wifi?

    I am unable to get my iPhone 4S to connect to any wifi connection, I have reset my phone as well as visitedn my cellular provider without success. Does anyone know how I could possibly get my phone to connect to wifi?

    Thanks for the responses, they have been very illuminating!
    This is very disappointing from The Carphone Warehouse. If they had mentioned this when I went into their stores, I wouldn't have completed the purchases. I bought two phones at separate outlets and neither of them told me this.
    I have been in contact with T-Mobile already as I thought they had sneakily applied a software update that locked the phone. They have denied locking it and suggest that it is something that Apple do. Their solution was a factory reset.
    I have a call logged with Apple this afternoon, so will see what they suggest. Hopefully they will give me something that I can take to The Carphone Warehouse or T-Mobile.

  • I just updated my phone and it is now stuck with usb cable and itunes logo and itunes on my computer says I have to restore.  Can I get my phone working again without loosing my photos?

    I just updated my phone and it is now stuck with usb cable and itunes logo and itunes on my computer says I have to restore.  Can I get my phone working again without loosing my photos?

    There is no other way than to plug into a computer to restore the phone. You can use another computer to do so, but in case you did not back up to iCloud your data and settings will be gone.
    Follow this article to connect in recovery mode:
    iOS: Unable to update or restore

  • Took the battery out and put it back in, now I can't get the phone on!

    We were told that it was good for the phone if the battery were removed and put back in so it can reboot. I did that and I can't get the phone back on! Sometimes (not everytime) I'll get the red light to come on, but still nothing. I tried inseerting another bb battery from a Curve and when the red light came on, I held the 'end call' button and then when it went off I held the green 'make call' button and teh screen displayed a battery with a line through it. That same battery works fine in the curve so I am just confused about what else I should be trying.
    Can anyone help me out here??? 

    did you try to insert the pearl-battery and connect it to the wallcharger? maybe the battery is completly empty.
    does the screen display something? 
    If your question was answered, please accept it as a sollution and / or give Kudos ;-)
    Use the Search Field first! Maybe the question you want to ask already exists!

  • HT4623 I am in the process of updating my IOS and my phone screen is showing a picture of the itunes symbol with a USB cord.  I can't get the phone to turn back on.  What do I do?

    I am in the process of updating my IOS and my phone screen is showing a picture of the itunes symbol with a USB cord.  I can't get the phone to turn back on.  What do I do?  Help!!

    Your device is in recovery mode. Connect the device to iTunes and the computer and follow the instructions in this support document. http://support.apple.com/kb/HT1808

  • Hi, I have a iPhone 4S and I reset the phone to factory settings bcos the iTunes and AppStore didn't work. Now I can't get my phone to turn on

    Hi, I have a iPhone 4S and I reset the phone to factory settings bcos the iTunes and AppStore didn't work. Now I can't get my phone to turn on

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 15 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    -Griff W.

  • I can not sync my iPhone to the computer. I keep getting up an error message that synchronization does not want to start. I have uninstalled iTunes and then reinstall it. But the same warning box will appear. How can I get my phone in sync again?

    Can someone please help me get my iPhone to sync to your computer?
    I can not sync my iPhone to the computer. I keep getting up an error message that synchronization does not want to start. I have uninstalled iTunes and then reinstall it. But the same warning box will appear. How can I get my phone in sync again?

    Hello lenmin,
    Thanks for using Apple Support Communities.
    To help resolve this issue where you're repeatedly prompted to authorize with your Apple ID in iTunes when syncing, please follow the directions in the article below.
    iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
    Have a great weekend,
    Alex H.

  • How can I get the phone numbers in contacts to appear with dashes between the first 3 numbers, the next 3 numbers, and the last 4 numbers?  Until very recently it did so.  Contacts on my macbook pro does show up this way.  I do have a mobile me account an

    How can I get the phone numbers in contacts to appear with dashes between the first 3 numbers, the next 3 numbers, and the last 4 numbers?  Until very recently
    it did so.  Contacts on my macbook pro does show up this way.  I do have a mobile me account and in the past syncing was no problem.  What setting has changed?

    The phone number format as well as the date language and format and the time format are controlled by the Region Format setting. Go to Settings > General >International > Region Format.  When you change a region format, you can go back one page (to International) and see an example of the date/time/phone number format that your selected region format will produce.

Maybe you are looking for

  • My experience of SSO between SAP Portal6.0 and non-Sap Application

    Firstly I announce that I am not a Sap developer or a Sap Consultant.  I am a Cognos Consultant. I need do SSO between Sap Portal and Cognos Portal in my project, So I have to make SSO between two portals. I  tested  SSO between the two products on I

  • How to synchronize files in the iFS and a record of table ?

    I have table that contains information about a documents. Document's name, author, project number, etc... Documents are files made by Word or Autocad etc.. Documents are saved in the iFS. One record in the table should correspond one document in the

  • Ipad app that will fill in pdf form and capture signature with stylus

    Hello.  I am looking for an application which will allow me to read, edit and fill out pdf forms AND capture a signature on the pdf form with a stylus.  Any help would be greatly appreciated.  I currently am using an ipad, second generation.

  • Open multiple pages in pdf using c#

    I need help in this please..in c# when i click button 1 it opens one pdf with the nameddestination... when i click button 2 it opens in another pdf with the namedestination... i want to open the different name destination in opne pdf when i click the

  • Urgent needed of work flow documents.

    Hi Foks,             Can any one send me work flow documents to my mail ID : [email protected] I am in urgent need of the documents . <b><REMOVED BY MODERATOR></b> Regards, veera Message was edited by:         Alvaro Tejada Galindo