I can't get my phone to ring. When a call comes in the phone vibrates. I have checked my settings

I can't get my phone to ring. When a call comes in the phone vibrates. I have checked my [email protected]

There should be a little switch on the top left side of your phone. It's the silent mode. If it's switched on, you will see an orange bar there. Switch it off, and you'll get your sound back.

Similar Messages

  • How do i get the phone to ring when someone calls, it seems to only vibrate and I can't figure out how to turn on the ringer

    how do i get the phone to ring when someone calls, it seems to only vibrate and I can't figure out how to turn on the ringer

    look in settings:sounds and be sure you have a ring tone set, and both vibrate buttons are off.  Also be sure the volume slider id as far right as is comfortable.

  • My iPhone 4s Bluetooth is not working, I have ios 5.1 but just can't get my Sony erricson hbh-pv715 headset to connect to the phone,  the phone can't find any Bluetooth device, can you help please

    My iPhone 4s Bluetooth is not working, I have ios 5.1 but just can't get my Sony erricson hbh-pv715 headset to connect to the phone,  the phone can't find any Bluetooth device, can you help please

    Yes it's in pairing mode, it worked fine with the 3GS but doesn't seem to work with the 4s,  my 4s can't find any other bluetooth device, I think the problem ls with apple?

  • I have a IPhone 5 and Iphone 5s. Both are set up with the same account ID and running IOS 8.0.2. When the phones are connected to the same Wifi at home, both phones will ring when someone call in to one of the phone.  Anyway to solve this problem?

    I have a IPhone 5 and Iphone 5s, each phone is activited with a different service provider. Both are set up with the same account ID and running IOS 8.0.2. When the phones are connected to the same Wifi at home, both phones will ring when someone call in to one of the phone.  Hence you do not know exactly which line the caller called.  If you answered using the wrong phone, then anyone calling the other number will not get through.  Anyway to solve this problem?

    Hey David Koh TP,
    Thanks for the question. It sounds like your devices are set up to use continuity together. Specifically, it sounds like you are signed into the same Apple ID in FaceTime, and have iPhone Cellular Calls enabled. To resolve your issue, simply disable this setting:
    Connect your iPhone, iPad, and iPod touch using Continuity
    http://support.apple.com/kb/HT6337
    Turn off iPhone cellular calls
    To turn off iPhone Cellular Calls on a device, go to Settings > FaceTime and turn off iPhone Cellular Calls.
    Thanks,
    Matt M.

  • Can I get help with podcasts?  When I try to open the podcasts, itunes crashes, says "itunes has detected a problem and must close", or the spanish equivalent since my xp is in spanish.  everything else works fine, it even downloads podcasts and syncs.

    Can I get help with podcasts?  When I try to open the podcasts tab, itunes crashes, says "itunes has detected a problem and must close", or the spanish equivalent since my xp is in spanish.  everything else works fine, it even downloads podcasts and syncs.

    The only other thing I can suggest is to use the Repair option for iTunes.
    Download the iTunes programme (do not uninstall your current iTunes) and then "install" the new copy. At some stage you should see an option to "install" or "Repair". Take the Repair option.
    Once you've done that, if you still have a problem, I don't know what else to suggest, except to search through the discussions to see if anyone else has had the problem and managed to fix it.

  • How do I stop all of my devices from ringing when a call comes in

    How do I stop all of my devices from ringing when a call comes in

    Use a different iCloud account on each device.
    Don't use iCloud at all.
    Disable Bluetooth.
    Don't connect to the same wi-fi network on all the devices.
    Go to Settings > FaceTime and turn it off.
    Go to Settings > FaceTime on the devices and disable 'iPhone Cellular Calls'.
    Any of these will work, but the last one is probably best.

  • I can't get imessages to recognize another iphone. Bubble turns green. the phone number is listed in contacts under iphone.

    I can't get my iphone to recognize another iphone while imessaging. The bubble will not turn blue, it remains green. I have tried tapping it and it wont change. The phone number is listed in contacts under iphone.

    Make sure your iMessage is activated. If the other person does not have a good data connection, iMessage will recognize that and fall back to a SMS. What you list the person's phone number as in Contacts does not matter.

  • Can't get Firefox to load at all after trying fixes from support web site. Have checked for lock file, processes running, reboot, reinstall. NO JOY.

    I'm running Vista for operating system on an HP laptop that's about 2 years old. I've installed all current updates.
    I've always used Firefox. It started crashing and creating processes but not launching. Went to support and scoped it out -- there was a lock file my profile directory. I deleted it, and Firefox started loading.
    Used it a few times -- closed the app each time on exist as per suggestions on support site info. One time -- back to square one, wouldn't load, just created a process. Reboot, ending process, checking for lock file, reinstalling -- all unsucessful.

    Brian
    Below is from using a SIP build.  It does offer G722, but it's way down on the list so it's never used...
    m=audio 32678 RTP/AVP 0 8 18 102 9 116 101
    a=rtpmap:0 PCMU/8000
    a=rtpmap:8 PCMA/8000
    a=rtpmap:18 G729/8000
    a=fmtp:18 annexb=no
    a=rtpmap:102 L16/16000
    a=rtpmap:9 G722/8000
    a=rtpmap:116 iLBC/8000
    a=fmtp:116 mode=20
    a=rtpmap:101 telephone-event/8000
    Taking Sreekanth's suggestion to try a Skinny build, I get the following when I make a call.  It offers codecs in the order I SET THEM AND ONLY THE CODECS I SET!  YAY!
    m=audio 19374 RTP/AVP 9 0 101
    a=rtpmap:9 G722/8000
    a=fmtp:9 bitrate=64
    a=rtpmap:0 PCMU/8000
    a=rtpmap:101 telephone-event/8000
    Using a Skinny build on the phones also solved other issues.  The phones use G711 when the whole path supports G711 and G722 when the whole path supports G722.  It doesn't always use G722 and rely on transcoding for the call paths that can't use it.  It's fantastic..  The phones also receive the QoS tagging that I set and that seems to result in better audio quality than on the SIP builds, which never did get those settings.  Finally, it even solved a slow Exchange 2013 answer issue I have been experiencing for quite some time.  I practically fell out of my chair when I saw everything that was fixed just by switching...
    Cisco, PLEASE FIX YOUR SIP BUILDS!  It's insane how the SCCP builds work perfectly and the SIP builds don't, especially with how much these phones cost..  I was thinking of possibly acquiring some 9951s, which are SIP only.  I'm a little leery about that at this point.  If they have the same kinds of issues as the SIP builds for the 7975g, there's no SCCP alternative to use..
    Sreekanth
    Thank you for suggesting a Skinny build..  That was about the only thing I didn't try.  I am happy beyond belief that this is working so well now, even though the SIP builds should be just as well developed as the SCCP ones.

  • I hve unlocked iphone and got walmart family mobile. I was issued a phone number initially with phone and then I had them change it. Now when I send texts caller id people see is the original phone number, and when I call it is the new number.

    I have unlocked iphone and got walmart family mobile. I was issued a phone number initially then asked for a different one. Now when I send text messages, they show up the original number, but when I make phone calls, the id shows up the new number, I can recieve text messages to both numbers. If you try to call the first number it says it is not a working number. On my phone, if I go under "about" it says "my phone number" and it says the second number, under settings, and messaging, it says that I send and recieve messages from the original one. T-mobile, has no idea why this is happening and has tried everything to fix it

    This is for iMessages only, not for text messages as in SMS/MMS.
    Settings > Messages > Send & Receive > Apple ID.
    Select your Apple ID and at the menu window that appears, select Sign Out.
    Turn iMessage off at Settings > Messages > iMessage.
    Then follow these instructions.
    You can remove an iPhone from your support profile by following these steps.
    Step 1: Click on this link to open the login window of your support profile.
    Step 2: Log into the website using your Apple ID – same as your iTunes login.
    Step 3: Click on the button ‘Edit products’ and select the iPhone that you want to remove from the list.
    Step 4: Click on the arrow behind the product, and then click on the button ‘Unregister’ to delete the iPhone from your support profile.
    After you unregister your iPhone, on your iPhone go to Settings > Messages > iMessage and turn iMessage on.
    Go to Settings < Messages > Send & Receive > Apple ID. Sign back in with your Apple ID.
    This should re-register your iPhone with your Apple ID with iMessage with the new phone number only.

  • I have updated my iphone 4 and all of my music has been removed from my iphone but still in my itunes. How can i get my music back because when i sync none of the music goes back across?

    Problems with syncing.. Anyone help?

    This will happen if you have photos in your camera roll and an out-of-date scanner or webcam driver. See this: http://support.apple.com/kb/TS1502

  • After my last update, my iphone 5 doesn't ring when a call comes in, it goes directly to voicemail

    I just installed the latest update to my iPhone 5 and now all my calls go directly to voicemail.  Help needed.

    Hello LoisJane,
    It sounds like your phone is sending calls directly to voicemail and will not ring. It seems to me that Do Not Disturb may be enabled. Take a look at this info about how to set that up:
    iOS: Using Do Not Disturb
    http://support.apple.com/kb/HT5463
    You can use the Do Not Disturb setting to silence calls, alerts, and notifications.
    To enable, tap Settings > Do Not Disturb. When Do Not Disturb is on, a "moon" icon will appear in the status bar.
    To make changes to your Do Not Disturb settings, tap Settings > Do Not Disturb.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • My iPhone will not ring when a call comes in. It goes straight to voicemail.

    What can I do when my iPhone does not ring, and just goes to voicemail?

    Call your wireless carrier.  I had the same issue once.  the problem was on their end.

  • I have a mid 2011 macbook air and a new Apple TV but I can't mirror. What's the problem? I have checked display settings and I don't have the "allow mirroring" option there.

    What is the problem?

    About AirPlay and Airplay Mirroring
    AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
    Several Apple Articles Regarding AirPlay
    Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
    How to set up and configure AirPort Express for AirPlay and iTunes
    iTunes- Troubleshooting AirPlay and AirPlay Mirroring
    iTunes- Using AirPlay
    Apple TV (2nd and 3rd gen)- Understanding AirPlay settings
    About AirPlay Mirroring in OS X Mountain Lion
    iTunes 10- About playing music with AirPlay
    Troubleshooting AirPlay and AirPlay Mirroring
    Using AirPlay
    Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs  that do not support Airplay and mirroring.
    Other solutions are the Air Parrot, StreamToMe, and AirServer.

  • HT1420 How can you get your iTunes music back when your iTunes Match expires & you no longer have access to the computer it ws stored on?

    How can you get your iTunes music back when your iTunes Match expires &amp; you no longer have access to the computer it ws stored on?

    Try here:
    iTunes: Error 13019 during sync

  • Can not get wifi to turn on when I swipe it

    Can not get wifi to turn on when I swipe it

    Is this your problem:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    It is frequently a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Maybe you are looking for

  • How can I extract pics from my iPad synched to another PC

    So I have got an iPad which was synched to another computer and now I dont have that computer anymore. I have a macbook which has its own library which is synched with my iPhone. Everytime I connect the iPad to my macbook, I get an error message sayi

  • Unable to send mail via Secure SMTP

    Our email system allows users access to their accounts via secure IMAP and SMTP. I am able to connect and view my inbox via secure IMAP, using a number of different S60 devices - namely E72, E52 and 5800. However I am unable to connect to send via se

  • -103 Failed to Connect to Company

    That's good to know but now why ? What do I do to know why it doesn't connect ? I've looked everything, dll's versions, and everything seems all right !

  • Setting check box (in detail block) as (non) updatable...

    Hi, I have a master-detail form. The form does execute a query when it opens. Now, according to a condition i want to do the check box(in detail block) as non- updatable. I have tried to write the appropriate code in: WHEN-NEW-RECORD-INSTANCE(in the

  • TCODE for Mail action monitor

    Hi, We are sending the mail action to the user.but it doesn't send the user which is assigned in BP. Which tcode we can see the status of the mail action,apart from the transaction? Regards, muki