I can't get my printer to work since I loaded snow leopard???

If I delete snow leopard will I be able to use safari again and get my printer to work again???

I am afraid if you can't print with any applications in Mac OS this is not a problem specific to Firefox and we can't be of much help.
I'd suggest contacting [https://www.apple.com/support/country/ Apple Support] if this is the case.

Similar Messages

Can't get my printer to work

Hi, I have just bought an apple iMac and I can't get my printer to work. It is a Sansung ML laser 4500. I tried to download a driver on thee Samsung website but can't get a driver. Please advise how I can get this printer to work as I don't want to buy another printer.
Please help.
Michael

Samsung does not have an OS X driver for their 4500 series printers. You can check in Print & Fax to see if a driver is provided in OS X, but if Samsung doesn't make a driver for OS X then it's unlikely you will find one that works. Of course you can try the Generic driver, but no guarantee it will work. If it does only some printer functions will be supported, if any.

How can I get my printer to work after a Yosemite update?

How can I get my printer to work after a Yosemite update?

Hi there michaelfromepsom,
You may find the printer troubleshooting steps in the article below helpful.
Troubleshooting printer issues in OS X
-Griff W.

HT4356 I can't get air print to work from my iPhone 4. I've verified everything. Th phone gets WIFI from AT&T. Computer's WIFI through Netgear, Charter. How do I resolve this?

I can't get air print to work from my iPhone 4. I have newest phone operating system, and the phone is air print enabled.
The phone gets WIFI from AT&T. My computer, to which my printer is wirelessly connected, gets WIFI from Charter Communications and a Netgear router.
That must be the problem. How do I resolve that?

For Airprint to work your iPhone and printer must be on the same local network. Your printer must support Airprint (see here for list: http://support.apple.com/kb/ht4356).
Can you connect your iPhone to the Netgear router WiFi?

I can't get Google Autofil to work since upgraded to Firefox 4

I can't get Google Autofil to work since upgraded to Firefox 4
running on windows XP

Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you.

HT201250 My backup external hard drive hasn't work since I insalled Snow Leopard. Bad:( I am still learning about my MAC and would just like to re-format the hard dive and set everything up again. I want to upgrade to Lion but can't untill I backup what

My backup external hard drive hasn't work since I insalled Snow Leopard. Bad:( I am still learning about my MAC and would just like to re-format the hard dive and set everything up again. I want to upgrade to Lion but can't untill I backup what I.

Read through the links here, calm down and take your time.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

Can't get out.print to work with XML jsp tags

<jsp:scriptlet>
if(ErrorTrap == true) {
out.println("<tr><td colspan=\"center\" align=\"center\">There was" an error while processing the form</td></tr>");
ErrorTrap = false;
</jsp:scriptlet>
I can't get this script to work with the XML stype jsp tags. It keeps telling me the <jsp> tags are untermintaed. Is there a special trick to fix this or do I have to use the non-XML type tags?

Sorry, I didn't mean to put the extra " in the out.println text string. :-/

*** I can't get bonjour printing to work and it's DRIVING ME CRAZY!!!!

I can't get my printer to print through my Airport Express and Bonjour and it is now starting to get really frustrating. Here's my set-up.
- Linksys wireless router as base station
- AX joined to Linksys network - green light is solid on the AX
- Have my Xerox 7750 printer connected to AX via USB
- Using iBook G4
- Removed all other printers, re-started and then added the 7750
The problem is, it appears as though the Xerox is connected properly but when I try to test print a page, the print dialogue opens in the dock but a red exclamation sign appears next to it. It says the print job has been stopped. So, I click start job and the bar goes stripes for a few seconds and then goes back to stop jobs and the red exclamation mark appears next to the printer in the dock.
So I'm at a loss as to how to fix this. I've use the printer set-up utility, I've re-started the computer, I've re-started the printer, it's properly connected to AX and the AX green light is on.
Can anyone help me with this?

try putting the AX in client mode. If your linksys is your main wireless/LAN connection out and your AX is set to extend the existing network, your printing and airtunes may not operate properly.
http://www.info.apple.com/kbnum/n108040

GCC Elite 21n+ Printer Stop working after Upgrade to Snow Leopard

GCC Elite 21n+ B&W Laser Printer no longer works after upgrading to Snow Leopard 10.6.2.
A back-up HP 2015DN Printer works intermittently. It will not work with ethernet cable connected to Net Gear Ethernet Hub (model FS105). But will work most of the time when ethernet cable is connected directly to back of computer.
Back to GCC printer. Just cannot get it to work.
But I cannot figure out what the IP address is for the GCC printer. Tried 192.168.1.4:9300
See post (discussions.apple.com/thread.jspa?messageID=10127869). Still did not work.
GCC tech have this work around. Here is what I received from GCC via email.
+At 01/02/2010 12:21 AM we wrote -+
+Since Apple has made the decision to eliminate Appletalk from it's Operating System, you are now forced to set the printer up over TCP/IP. Please keep in mind that GCC has never provided drivers for the Mac. We use the Apple Built in Print Driver. We do provide an OS X PPD Installer located on our website that I recommend you download, unstuff, install, reboot your Mac, then add the printer. You can find the Installer at http://www.gccprinters.com/support/doc/ Click on the Model of your printer and download the OS X Installer. DO NOT download the Applications Folder.+
+You will need to set the printer up over TCP/IP, which means you will need to pull the IP Address of the printer from the Printers Configuration Page. Once you've done that, please do the following:+
+You can add the printer over IP, that should work fine. Here are some steps for you to take.+
+1) Select 'System Preferences...' (4th item) from the 'Apple' menu. The 'System Preference' panel will appear as a new window.+
+2) Click on 'Print & Fax' icon (second row 'Hardware', second icon from right side). The 'System Preferences' panel will change into the 'Print & Fax' panel without opening a new window.+
+3) Click on the '+' button to add a printer (2/3 the way down on the left side on the 'Print & Fax' panel). The 'Add Printer' dialog will open in a new window.+
+4) Select the 'IP' icon in the top row of the 'Add Printer' dialog.+
+5) Next to 'Protocol' select LPD Line Printer Daemon.+
+6) Next to 'Address' type in the IP address you assigned to the printer. The Mac should prompt "complete and valid address".+
+7) (Optionally) Next to 'Name' set the name of the printer to something friendlier. Normally it defaults to the IP address enter in the previous step. The 'Name' is what the printer is called in the print dialog.+
+8) (Optionally) Next to 'Print Using' change/verify the PPD.+
+9) Click 'Add' in the bottom right corner. After a few moments the 'Add Printer' dialog will close.+
+10) The printer added in the previous step will appear in the list on the left side of the 'Print & Fax' panel. Click on the close box in the left-top of the 'Print & Fax' panel.+
+11) Done. You should be ready to print.+
Still cannot get the GCC printer to work or discover its IP address. Printer's Configuration page says
TCP/IP: Enabled IP address: Unknown subnet Mask 255.255.255.0
When I download the Drivers from GCC Web Site I only get a Text Document with loads of meaningless
gibberish. There is nothing to unstuff and install.
All worked well with OS 10.5.
Thanks for shedding any light.
John L.
Thanks,
John

Hello John,
At this stage you will not be able to get this to print until the printer has a valid IP address. According to your post, the IP address setting is enabled but the actual IP address is unknown. This is most likely a result of the GCC being set to DHCP but if there is no DHCP server or router capable of assigning the printer an IP address, then it will not get a valid address.
So, the first thing I recommend is you check the documentation for manually setting an IP address into the printer. This address needs to be in the same subnet as your Mac. If you check System Preferences > Network on the Mac, you will see your IP address and subnet mask. If the subnet mask is set to 255.255.255.0, then you subnet will be the first three sets of numbers. For example, a device with an IP address of 192.168.1.12 and a subnet mask of 255.255.255.0 has a subnet of 19.2.168.1 and a network address of 12. Ideally, so that other devices can communicate with this device, they also need a subnet of 192.168.1 but a different network address, any number between 1 and 250 but one that is not already being used by another device, such as 12 in this example.
Once you have the IP address set in the printer, then you add the printer as the GCC tech stated, using IP > LPD for the protocol. Note that you will only need to enter the IP address, such as 192.168.1.4 as per your post example. Don't enter any other numbers, such as the 9300 port reference you have tried already the colon after the IP address followed by the 9300).
For the Print Using, you can use Generic PostScript to begin with as a test. If you then wanted to use the GCC PPD, then the link is okay. When you select the 21+n the next page shows the 21+ installer for OS 9 and OS X. This is a stuffit packed file so you will need some form of Stuffit (Stuffit Expander is a free download) to unpack the file first. Once unpacked, there is most likely an installer that you run. This will copy the PPD files for the printer to the appropriate folder.
Hope this helps. Please reply if you require more help.
Pahu

Can't print to pdf since I installed Snow Leopard.

I make newspaper ads all the time in Illustrator CS4 on a Mac.
I always print them to pdf files. Never had any trouble doing this.
However, since I installed Snow Leopard I can not print to pdfs.
I go through the usual motions and then... just nothing happens.
Are there known issues with AI CS4 and Snow Leopard?

I was having the same problem. Basically, you now have to "save as" then "to PDF" to get the same results. Although this new method give you more choices in terms of output, i.e. saving layers, image resolution, it has also produced larger PDF files. I will then have to open the document in Acrobat and "reduce file size". I do wish they would bring back the print to PDF option. Go to the link below to read more. If you figure out how to produce the same results and get the small files sizes back please share.
http://blogs.adobe.com/jnack/files/Adobe-SnowLeopard_FAQ.pdf

Went to apple store bought new mac and hp B210 printer can't get wireless printer to work right all

I cannot get the HP B210 wireless printer to work consistently with my iPHONE 4 or to print consistently from my home mac computer ?

What router? What kind of encryption (WEP, WPA, etc)?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Can't get my printer to work with new OSX 10,6?

I upgraded to snow leopard 10.6.3 so I could use the new Touch 4th generation. Everything was great until I tried to use my epson R2880! I keep getting
errors. It also says the printer is not registered. I have downloaded software updates, font updates, etc. no luck? Any ideas? thanks

Since you mention doing an upgrade I would be inclined to reset the printing system and then add the R2880 queue again.
Open System Preferences > Print & Fax
Move your mouse over the Printers list
Hold down the Control button and click the mouse
Click the "Reset printing system ..." popup
Restart your Mac
This will remove your print queues but not your printer drivers. So you will only need to add your printer queues again.

Can't get Multicam sequence to work since update

I have the latest updates for Premiere Pro. Last mo nth I started a project with three different angles and was able to create and successfully edit the project with no problem. Shot different project, same three cameras, same files, and I can NOT get the multicam sequence to sync anything. I've tried all three view, all combinations of the three, exporting to different type of files, nothing works.
What gives?
Any help would be appreciated. As with anyone else, I'm sure, I have a deadline for this project.
Thanks
Running Windows 7 64-bit OS
16GB ram

I guess I'm not going as crazy as I thought!!! Seems I created the problem on my own. One of the sequences had two tracks, one I couldn't see in the view, and it wasn't sync'd up with the other. Once I deleted it and did the multicam, went straight away and am half way through editing a wedding ceremony!!!

HT4847 My phone was stolen. How can I get my photos off the iCloud with a Snow Leopard operating system?

My phone was stolen. How can I get my photos off the iCloud with Snow Leopard.

Welcome to the Apple Community
You can't, if the photos are in photostream you need a compatible device, if they are in a backup, you can only use the backup to restore to a new device.

App installers do not work since upgrading to Snow Leopard

Can't upgrade Flash. Can't upgrade iTunes. When I get to the "Install" button in the installer app, I click it and it does nothing. Anyone else?

FIGURED IT OUT.
Font conflicts. (I use FontCase app to manage my fonts.) I deleted Monaco.dfont, Geneva.dfont, Helvetica.dfont, Keyboard.dfont, LastResort.dfont, and LucidaGrande.dfont, and everything works again.
This came after I phoned Apple Support, ran disk permissions repair something, and reinstalled Snow Leopard. Hope it helps someone else.

I can't get my printer to work since I loaded snow leopard???

Similar Messages

Maybe you are looking for