I can't get my recording to work properly. I have been on hold for 55 minutes and I need help

Please someone help me. I have been on hold for ever.
I am writing a project where student are being shown how to create tables in Word. But when I do the recording the recording are screwed up and I can't get student to enter in the text I need them to enter. This project has to be done tonight.
Please advise

Rod meant sharing the screenshot on this post, which you can do by clicking the tiny camera icon. Rod is not an Adobe employee (nor me).
Sreekanth

Similar Messages

  • My old iMac and OS 10.4 will not accept the New iTunes Version 10 application and I can't get past the screen offering to download iTunes 10.  This is wrong and I need help getting past this situation. Help!

    My old iMac and OS 10.4 will not accept the New iTunes Version 10 application and I can't get past the screen offering to download iTunes 10.  This is wrong and I need help getting past this situation. Help!

    Sure, you can get around it if you don't need the newest version of iTunes. I still use version 7.5 because the newer versions didn't strike me as offering anything I needed.
    If you do need a version 10-something then you will have to upgrade your operating system to Leopard (fi your computer will support it) at least.  If you need 10.5 for some reason then there's no getting around it, you will have to buy a new computer.

  • How can i get the speakers to work properly? they have a lot of static and scratchiness from them

    how can i get the speakers to work properly, they have a lot of static and scratchiness coming from them?

    I found my answer in this thread:
    https://discussions.apple.com/message/16646999#16646999

  • I can not get my facetime to work. I have a wireless connection but I can not get my facetime to work

    I can not get my facetime to work. I have a wireless connection but it is not working.

    Doublechecking, Jensen. What's the precise text of your error message, please? (There's a few different ones I can think of that you might be getting.)

  • I have been using pages for months and now I can not get it to open any templet or previous document to open?

    I have been using pages for months and now I can not get it to open any templet or previous document to open?

    A little more information would be helpful.
    What version of Pages are you using? The latest is 4.1 with the update released on July 20. In Snow Leopard 10.6.8 you need at least Pages 4.0.5. If you're not running the latest versions & Software Update says your software is up to date, make sure the applications are where the installer initially put them. The updaters are very picky. If the location is not where the updater is programmed to look or if the folder doesn't have the name the updater looks for, it will not work. The applications cannot be renamed or moved. They must be in the iWork '09 folder in Applications. That iWork folder must be named iWork '09. If it doesn't have the '09 Software Update won't find them & the updaters won't work.
    If you are running at least Pages 4.0.5 & haven't made any other changes to your Mac since Pages was last working correctly, the likely culprit is corrupt preferences. Go to HD > Users > (your account) > Library > Preferences & delete the com.apple.iwork.pages.plst & restart Pages.

  • All I have on my I pod touch is a white screen with multicolored lines going across screen.  What do I need to do.  I can't use I tunes because it says I have to have passcode and can't get screen to come up.  I have already tried holding both keys down.

    All I have on my I pod touch is a white screen with multicolored lines going across screen.  What do I need to do.  I can't use I tunes because it says I have to have passcode and can't get screen to come up.  I have already tried holding both keys down.

    - See if placing the iPod in Recovery mode will allow a restore.. It bypasses the passcode (and erases the iPod)
    - Next try DFU mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • How do I set Tbird 31.5 to show options for using italics, boldface, etc. in composing and replying to email? Have been using Tbird for years and can't get it.

    I really have been using Tbird for years and I can't get the options for italics etc to show when composing or replying. I'm an editor looking for job so this is relevant. Please save me from Outlook. Thanks.

    I believe you can specify italics by putting a slash before and after the text, bold is done using asterisks before and after text, and underline is done using the underline character before and after text.

  • I just installed the Lion operating system, basically to upgrade my iPhone. I didn't realize that my Microsoft Office 2004 application would no longer work. I have been using Word for my writing and I receive most of my emails with Word attachments. I hav

    I just installed the Lion operating system, basically to upgrade my iPhone. I didn't realize that my Microsoft Office 2004 application would no longer work. I have been using Word for my writing and I receive most of my emails with Word attachments. I have been using Apple products for years, always touting their reliability and customer service. I am not a techie, I just want to be able to do what I do on the computer and Apple always fulfilled my needs. Now I am told because of some operating system gobbledygook, I have to go out and purchase new software to use Word. This is despicable. I see no particular benefit to using Lion, but I do see a lot of detriments. Apple now seems to have turned into Microsoft, making software obsolete so they can make more money and to **** with the customer. You can be sure that my next computer will be a PC. I have completely lost confidence in Apple.

    I seem to never tire of saying this. It was for Apple when they first announced 10.7 to disclose this. Yes, it was widely reported -- or rather, rumored -- but not by Apple. And many people who have gotten caught by this assumed that Apple itself would have told them beforehand about the loss of this very important feature which they had come to rely on. As far as I know, not even in fine print, does this appear anywhere on the Lion announcement or any of its links.
    I am not saying Apple had to continue Rosetta in Lion, or forever, just that if it was going to be dropped, it should have been made known.
    As relative "insiders" we should not forget that many people don't have the time, habit or interest to do this kind of research. I think it is a breach of trust that Apple has never directly made this announcement or given people the opportunity to decide beforehand if giving up their PPC apps for a new OS is a worthwhile tradeoff.

  • HT204053 the maximum number of free accounts have been activated on this iphone and i need create accound but i can't :/ please anyone tell me what i do to solve this problem

    the maximum number of free accounts have been activated on this iphone and i need create accound but i can't :/ please anyone tell me what i do to solve this problem

    thnx bro i create nw accound

  • Can't Get Manual Recording To Work

    I have been unable to get manual recording to work and thought this was something to do with having dual monitors.  I have now disabled my second monitor, and it is still not working for me. It's possible that I have done something wrong or have misunderstood what manual recording is.
    To that end I have made a 3 minute video showing you the steps I took while attempting a manual recording of just three print screens.   Please could someone take a look ta the video and tell me if what you see is expected behaviour.  Thank you.
    manual-recording.mp4 - Google Drive

    Thank you for taking a look at the video Rick.  You can probably tell this problem is driving me mad.
    I did as you suggested but it made no difference to the outcome.  So next I uninstalled Captivate, and re-installed with only one monitor active, just in case that mattered.  I then kept it at one monitor but even with only one monitor videos appear in my manual captures.
    So next I re-enabled my second monitor and ran the test again. On monitor 1, video is included no matter what, and on monitor 2 it isn't.  I have filed a bug report with Adobe but so far the response has been to try running it as administrator and also to check the error logs.  I checked those and there is nothing but informationals in there.
    I also ran the entire test when running as an admin, and the results were the same.

  • I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

    I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

    Will not work.  To my knowledge, dual converting like that isn't supported.  The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

  • Have been using iPhoto for weeks and had it open just an hour ago and when I tried to open again I got a message that I had to upgrade in or to see my library??? after trying to upgrade still getting message. What the heck is going on

    Cannot open iphoto library, getting a message staing I have to upgrade to see my library which I have done four times with no results.  I just had iphoto opened an hour before without a problem and have been using it for weeks before today.  Any ideas as to what is going on?

    Apply the two fixes below in order as needed:
    Fix #1
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    iPhoto 8 (09) and earlier- run the options indicated
    iPhoto 9 (11) and later- run  Option #4 to rebuild the database
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager (iPhoto 8 or earlier or IPhoto 11 and later) and launch.
    2 - click on the Add Library button and select the library you want to add in the selection window..
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the
    File ➙ Rebuild Library (iPhoto 8 or earlier)
    or
    Library ➙ Rebuild Library (iPhoto 9 or later)
    menu option to rebuild the library.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    Happy New Year

  • TS3274 Can't get video record to work

    I cannot seem to switch the camera to take a video.  It got stuck on video once, but I shut the IPad off and when I turned it back on it was back on photo.  There has got to be a way to switch between taking photos and videos!  Help!  I am new at all this.  Thank you.

    Does the TZ170 have UPnP or Port Triggering then ?
    I can not see that it does here
    Opening the ports in the manner listed on that link will only allow one computer (IP) to use the open ports.
    The Linksys is router and you have not mentioned what the modem is doing at that end.
    Why not use UPnP here ? The Linksys does it (on the Administration page)
    Most likely this needs the Respond to Anonymous Pings checked on the Security page.
    9:29 PM Thursday; January 17, 2008

  • Can't get IR receiver to work properly

    First to state out, I have read the wiki like 10 times and googled for a couple of hours without getting this to work.
    If I start "sudo mode2" I get alot of output when enter the buttons. But I had to change "ir-table -p LIRC" before that worked.
    I have added the following to /etc/rc.local
    echo lirc > /sys/class/rc/rc0/protocols
    I've done "sudo modprobe mceusb" and also tried "modprobe evdev"
    I've added this to my /etc/conf.d/lirc:
    #Parameters for daemon
    LIRC_DEVICE="/dev/input/by-id/usb-FINTEK_eHome_Infrared_Transceiver_88636562727801-event-if00 "
    LIRC_DRIVER="devinput"
    LIRC_EXTRAOPS=""
    LIRC_CONFIGFILE="/etc/lirc/lircd.conf"
    But further than that I can't get. I've tried to download a /etc/lirc/lirc.conf for my Harmony 525 but it dosn't work. Nor to the irrecord command give me any file!
    When I run the "# irrecord -d /dev/lirc0 /tmp/my_remote" i get, (but no file at all!):
    Press RETURN now to start recording.
    Found gap: 75504
    Please keep on pressing buttons like described above.
    RC-6 remote control found.
    Found possible header: 2816 286
    Header is not being repeated.
    No repeat code found.
    Signals are biphase encoded.
    Removed header.
    Signal length is 36
    Checking for toggle bit mask.
    Please press an arbitrary button repeatedly as fast as possible.
    Make sure you keep pressing the SAME button and that you DON'T HOLD
    the button down!.
    If you can't see any dots appear, then wait a bit between button presses.
    Press RETURN to continue.
    No toggle bit mask found.
    But I know for sure that RC6 has a toggle bit!
    Here's some info that perhaps can help
    uname -r
    3.2.8-1-ARCH
    lircd --v
    lircd 0.9.0
    cat /proc/bus/input/devices:
    I: Bus=0003 Vendor=046d Product=c30e Version=0110
    N: Name="Logitech HID compliant keyboard"
    P: Phys=usb-0000:00:06.0-6/input0
    S: Sysfs=/devices/pci0000:00/0000:00:06.0/usb4/4-6/4-6:1.0/input/input0
    U: Uniq=
    H: Handlers=kbd event0
    B: PROP=0
    B: EV=120013
    B: KEY=1000000000007 ff800000000007ff febeffdff3cfffff fffffffffffffffe
    B: MSC=10
    B: LED=7
    I: Bus=0003 Vendor=046d Product=c30e Version=0110
    N: Name="Logitech HID compliant keyboard"
    P: Phys=usb-0000:00:06.0-6/input1
    S: Sysfs=/devices/pci0000:00/0000:00:06.0/usb4/4-6/4-6:1.1/input/input1
    U: Uniq=
    H: Handlers=kbd event1
    B: PROP=0
    B: EV=13
    B: KEY=fff ffffffffffffffff 2000000 387ad800d001 1e000000000000 0
    B: MSC=10
    I: Bus=0019 Vendor=0000 Product=0001 Version=0000
    N: Name="Power Button"
    P: Phys=PNP0C0C/button/input0
    S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    U: Uniq=
    H: Handlers=kbd event2
    B: PROP=0
    B: EV=3
    B: KEY=10000000000000 0
    I: Bus=0019 Vendor=0000 Product=0001 Version=0000
    N: Name="Power Button"
    P: Phys=LNXPWRBN/button/input0
    S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    U: Uniq=
    H: Handlers=kbd event3
    B: PROP=0
    B: EV=3
    B: KEY=10000000000000 0
    I: Bus=0019 Vendor=0000 Product=0006 Version=0000
    N: Name="Video Bus"
    P: Phys=LNXVIDEO/video/input0
    S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:09/LNXVIDEO:00/input/input4
    U: Uniq=
    H: Handlers=kbd event4
    B: PROP=0
    B: EV=3
    B: KEY=3e000b00000000 0 0 0
    I: Bus=0010 Vendor=001f Product=0001 Version=0100
    N: Name="PC Speaker"
    P: Phys=isa0061/input0
    S: Sysfs=/devices/platform/pcspkr/input/input5
    U: Uniq=
    H: Handlers=kbd event5
    B: PROP=0
    B: EV=40001
    B: SND=6
    I: Bus=0003 Vendor=1934 Product=5168 Version=0001
    N: Name="Media Center Ed. eHome Infrared Remote Transceiver (1934:5168)"
    P: Phys=usb-0000:00:04.0-6
    S: Sysfs=/devices/pci0000:00/0000:00:04.0/usb3/3-6/3-6:1.0/rc/rc0/input6
    U: Uniq=
    H: Handlers=kbd event6
    B: PROP=0
    B: EV=100013
    B: KEY=fff 0 200108fc32e 237605100000000 0 700158000 419200004001 8e968000000000 10000000
    B: MSC=10
    I: Bus=0000 Vendor=0000 Product=0000 Version=0000
    N: Name="MCE IR Keyboard/Mouse (mceusb)"
    P: Phys=/input0
    S: Sysfs=/devices/virtual/input/input7
    U: Uniq=
    H: Handlers=kbd mouse0 event7
    B: PROP=0
    B: EV=100017
    B: KEY=30000 7 ff87207ac14057ff febeffdfffefffff fffffffffffffffe
    B: REL=3
    B: MSC=10
    I: Bus=0000 Vendor=0000 Product=0000 Version=0000
    N: Name="HDA NVidia Headphone"
    P: Phys=ALSA
    S: Sysfs=/devices/pci0000:00/0000:00:08.0/sound/card0/input8
    U: Uniq=
    H: Handlers=event8
    B: PROP=0
    B: EV=21
    B: SW=4
    dmesg | grep ttyS
    [ 0.532104] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.707341] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    ls /sys/class/rc/rc0
    device input6 lirc0 power protocols subsystem uevent
    ls -l /dev/input/by-id
    lrwxrwxrwx 1 root root 9 Mar 6 19:38 usb-FINTEK_eHome_Infrared_Transceiver_88636562727801-event-if00 -> ../event6
    lrwxrwxrwx 1 root root 9 Mar 6 19:38 usb-Logitech_HID_compliant_keyboard-event-if01 -> ../event1
    lrwxrwxrwx 1 root root 9 Mar 6 19:38 usb-Logitech_HID_compliant_keyboard-event-kbd -> ../event0
    Last edited by Chrilleee (2012-03-06 19:53:29)

    Think I've found something more than can cause this problem, I want to run my Harmony as a "MCE Keyboard", not an "MCE Remote" (which I finally got to work).

  • I REALLY hate the page up/page down functions that automatically loaded with the program. I LIKE to use my page up/page down keys for web browsing. How can I get these keys to work properly, or any of the keys to work "normally" as I have in the past?

    When using certain keys on my keyboard, they don't work like they are "intended" to be used. I HATE how Firefox has changed those functions without my request. How can I get my keyboard to function as it "should"?
    Thank you.

    When using certain keys on my keyboard, they don't work like they are "intended" to be used. I HATE how Firefox has changed those functions without my request. How can I get my keyboard to function as it "should"?
    Thank you.

Maybe you are looking for