I can't get my software to recognize my second nano. How?

no more message than that!

Hi disturbthecomfortable,
I need a few more details about your question in order to help.
Even if iTunes isn't recognizing your iPod, is your iPod showing up as a device in My Computer, or not?
If your iPod isn't showing up in iTunes or My Computer, then check out the suggestions from here:
iPod missing in "My Computer" or in iTunes for Windows
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
-Kylene

Similar Messages

Can't get my computers to recognize 6th generation nano

I have tried to connect my Ipod nano to both my mac and PC. neither system will recognize it (actually them - I have 2). It is not the USB cable - I have a shuffle and it was recognized instantly by both machines.
Any answers?

A shuffle uses a different USB cable connector than the iPod Nano. You must use the standard USB to 30 pin cable like this one.
B-rock

I can't get my computer to recognize my Ipod nano

I'll plug my Ipod up and it says it's charging but it isn't showing up on itunes..it won't show Summer's Ipod when I plug it up

First of all, try another port on your computer. Some ports are not connected direct to the motherboard and do not recognize the iPod as well as those that are. Reset the iPod each time you connect it to another port.
Then try with the iPod in forced disk mode.
Putting iPod into disk mode.
Still no joy, See if any of these articles help.
Windows XP cannot detect an iPod.
USB drivers are not installed properly or are out of date.

I can't get my computer to recognize my iPod 4 Touch after a software update.

I can't get my computer to recognize my iPod 4 touch after I do a software update. The iPod goes into restore mode and the the computer won't recognize the iPod no matter what USB port I'm pluged into, or if I reboot the iPod, the computer, or iTunes.

Please don't get fancy with the font. It's hard to read.
http://support.apple.com/kb/TS1538
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

How can I get Lr 5 to recognize my iPhone 4s as a device to copy and import photos?

How can I get Lr 5 to recognize my iPhone 4s as a device to copy and import photos?

It does not work! This occurred since I upgraded to the iOS7 software on my iPhone. Apple claims it's an Adobe problem
Sent from my iPhone

After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

Refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538

HT201269 when i back up my iphone 5 so that i have all the info from my 4s on it, it wont put my music on it or let me do anything with it. how can i get my itunes to recognize that it is my new iphone and let me put stuff on it with out completely resett

when i back up my iphone 5 so that i have all the info from my 4s on it, it wont put my music on it or let me do anything with it. how can i get my itunes to recognize that it is my new iphone and let me put stuff on it with out completely resetting it?

What version of iTunes are you running on your computer? You need to update to the current version.

After a HD crash, I have to reinstall Photoshop Element 12 and Premier Element 12. I still see the link in my purchases history but nothing happens when I click on the link. How can I get my softwares back?

After a HD crash, I have to reinstall Photoshop Element 12 and Premier Element 12. I still see the link in my purchases history but nothing happens when I click on the link. How can I get my softwares back?

Jeanval have you tried a different web browser? For more information on how to download your purchased software please see http://helpx.adobe.com/creative-suite/kb/find-download-link.html.

Can't get the software to work with Audigy 2

Hi, I have had my Audigy 2 ZS going on a year now and haven't had any problems. I recently made a clean install of Windows XP and upgraded to SP2 and all that. Now, I can get sound out of the card but can't get the software to work at all; cannot get the volume slider bar to appear when I click the icon (it appears in the task bar though and I get a small gray square where the slider should appear), the surround mixer does not show when I double click the volume icon, EAX conxole is a no go, get an empty error box when I try to start the Equaliser.
I have tried everything from simple re-install to clean sweep to praying to the pagan gods. I have alsoo tried updating the drivers of course.
I run XP on an Intel MoBo (on-boeard sound deactivated), 52RAM, ATI 9700 ALL-IN-WONDER.
DOES THE CREATIVE SOFTWARE DEPEND ON ANY WEIRD LITTLE WINDOWS SERVICE OR SETTING THAT I MIGHT HAVE CHANGED DURING SETUP?
This is quite infuriating as any idea I come up with takes up a lot of time in installation, uninstallation and clean up. It worked before, why not now?
Thanks in advance. dentore

Ok I got it to work. This is the reply I got from Creative but I didn't remove the program from the add/remove option on the PC b/c that didn't work at first. I inserted the installation CD and remove it from that wizard. Rebooted and the PC found new hardware. I then installed the driver and software from the CD and now it works.
For Mediasource. It appears something was corrupted in Mediasource or there is a conflict within the system.Please uninstall all software and drivers for the soundcard, from add/remove programs. Once this is done, shut down the system and changePCI slots for the soundcard, then turn the system back on, cancel the found new hardware wizard, disable all background applications (especially virus scanner, firewall, and any other background applications running in the bottom right hand corner of the system), andthen perform a full reinstallation of the drivers and software from the soundcard installation cd.
CAT I hope you fix your sound card. Good luck.

Restored iPod, can't get january software update

I had to restore my ipod to make it sync with another computer and now I can't get the software update I freakin bought. I have tried everything under iPod Touch on the support pages. I have everything right and it just won't let me get it. This computer I bought the update on has had the OS reinstalled on it since then.

I've got the same problem. My touch came w/ 1.1.3. I up'd to 1.1.4, and purchased the January app update when it came out.
I wanted to wipe my iPod of personal information (going to sell it). I read on here that doing the settings:erase doesn't remove all information (wifi, iTunes purchase). Tried it, verified that post was correct (I could still attach to my encrypted wifi). So I went looking for a total reset instructions.
Found Apple's webpage on how to do it, and then how to install, verify or reinstall the January update: http://support.apple.com/kb/HT1376
So I factory-reset it, then followed the instructions to reapply the update. It's not working for me. I can sync music, videos, etc to it. I see the correct software version and serial number when I click on it in iTunes. Just no new apps on it.
I've performed the reset/sync ordeal a few times now. Tried setting it to manual, just to see if that might do the trick. Or toggling to non-manual afterward.
Still no luck

Can I get OCR software for a 8600 plus with a mac??

can I get OCR software for a 8600 plus with a mac??
if so , how?
This question was solved.
View Solution.

Hi,
An OCR software i integrated within the HP Scan Software.
Within the Applications folder locate the Hewlett-Packard folder and launch the HP Scan software.
Once completing the scan you may select RTF or TXT files which will save the scan by processing OCR.
If you do not have the HP Scan software installed be sure to install the following software by checking the HP Scan option during the installation:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=oj-125213-3&cc=us&dlc=en&lc=en...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How can a get my iMAC to recognize a newly installed optical drive?

I recently ordered a new Optical drive for my iMAC 12,1 to replace a damaged one. I followed the instructions online to replace the drive with no issues. I restarted the iMAC and it will not recognize the new optical drive. The optical drive won't accept any disks either. The optical drive is
Model GA11N
Manufacturer: HL
Condition: Brand New never used, without original manufacturer packaging
SATA interface, Slot-in loading, 12.7mm in height, without faceplate, no eject button. 1 Year Warranty
with Apple Logo, Special for Apple iMac Intel 20" EMC 2266 A1224 21.5" 2308 27" 2390 2309 2374 Mac Mini Mid 2010
Write Speed: DVD-RAM :5X DVD+R :8X DVD+R DL :4X DVD-R DL :4X DVD+RW :8X DVD-R :8X DVD-RW :6X CD-R :24X CD-RW :24X Read Speed: DVD-ROM/DL: 6X CD-R:24X CD-RW: 24X CD-ROM: 24X
How can a get the iMAC to recognize this new optical drive?

Here are some sources for Mac compatible optical drives that wiil work with your 2011 iMac.
http://eshop.macsales.com/item/OWC/VLU2SD24XS/
http://eshop.macsales.com/item/OWC/MR3F82SD24S/
http://www.amazon.com/Aluminum-External-Super-Drive-Apple--MacBook/dp/B007FUDKB4 /ref=sr_1_1?s=electronics&ie=UTF8&qid=1392328000&sr=1-1&keywords=mac+compatible+ dvd+drive
http://www.amazon.com/External-Super-Drive-Apple-MacBook/dp/B009XON646/ref=sr_1_ 3?s=electronics&ie=UTF8&qid=1392328066&sr=1-3&keywords=mac+compatible+dvd+drive
http://www.amazon.com/LG-Electronics-Portable-External-GP40NB40/dp/B009DS6OFU/re f=sr_1_8?s=electronics&ie=UTF8&qid=1392328138&sr=1-8&keywords=mac+compatible+dvd +drive

How can I get the phone to recognize mini SD Card?

I have a 32G Sandisk SD Card in the G4 mini but one day the phone said the card was blank and unsupported. I purchased another SD Card and installed it however the phone does not recognize that I have an SD card. When I try and save music or pics to the card the phone says I have removed the storage. How can I get the phone to recognize the card storage?

First of all do you Mount or Unmount the card from the settings menu before pulling the card out of its slot? Make sure that the option Mount is greyed out in you settings menu when the card is in the phone. If not select it. If you pull the card out of the phone select Unmount first. You can also try formatting the card from the same settings menu. If these two things do not work, then either the card is defective or the card hardware slot is defective.

How can i get apple tv2 to recognize more than one computer in my house

how can i get apple tv2 to recognize more than one computer in my house, I just got it and can only find one of two computers in my home

Same here. I have 1 ATV2 and 2 computers and each has separate iTunes accounts (mine and my wife's). The ATV menu says "computers" so I presume you can have more than 1 computer on 1 ATV. The big question is how do you set it up?

How can I get Acrobat 9 to recognize my new device, epson Workforce 3540 all-in-one.

How can I get Acrobat 9 to recognize my new device, epson Workforce 3540 all-in-one.

Hi plichy,
Are you able to print to your new printer from other applications, or is it just Acrobat that doesn't recognize the printer? This document outlines some printer troubleshooting tips, and is a really great place to start: Troubleshoot PDF printing | Acrobat, Reader
Please let us know how it goes.
Best,
Sara

I can't get my software to recognize my second nano. How?

Similar Messages

Maybe you are looking for