I can't get my window based computor to update to itunes 11.1 Help!

I can't get my windows 8 computer to upgrade to itunes 11.1. It keeps sending me to itunes.com for the latest version and it still won't update to the new version.
I keep getting error messages. Any help would be appreciated. Thanks.

If help is desired, provide specifics of the problem.  We are not mind readers.

Similar Messages

  • How can I get my imac to open since updating latest itunes and syncing with ipad?

    I have just updated itunes to the latest version and the imac was syncing to the ipad, when it froze. The hard drive is pretty full, but I can't get into it to delete stuff. I have tried opening it by holding the shift key till the wheel stops spinning, to no avail.

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
         a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 10
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 11
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 12
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • I can't get a Ringtones pane to appear on my ITunes page. HELP!

    I finally got ringtones to appear on the side of ITunes, but there is no Ringtones pane, so I cannot purchase any ringtones from ITunes. Suggestions?

    Are you using Safari? Have you tried an alternative browser - Chrome, Firefox?
    Edit: What's the website - maybe it's down.

  • I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

    I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

    Apple only supports Windows on certain hardware.
    http://www.apple.com/support/bootcamp/
    Apple provides their framework for Windows to run on a Mac, a piece of software called a Hybrid MBR that bridges the gap between how Windows reads the drive partition table (MBR) and EFI/GUID partition table that Mac's use.
    It doesn't mean Windows can't run on your Mac, a third party solution called rEFIt will also bridge the gap and allow booting of more that just Windows, Linux as well for a triple booting computer.
    Your hardware has to meet the other requirements the second and third operating system needs as as being able to install drivers that will work for your hardware, especially the fans or they will run loud and fast by default.
    http://refit.sourceforge.net/
    This above is a advanced procedure which requires knowledge how computers and various operating systems, drive formats and so forth work.
    I even admit I don't know everything myself, but I experiment on a separate piece of Mac hardware (out of warranty/AppleCare) designed for this purpose so in case something screws up I'm not taking down my only machine and can use the other to get online and find solutions.
    There is a very high potential for losing your data if your using advanced/non-Apple methods to install Windows on your only Mac where Apple doesn't support it. Also one shouldn't be doing this on Mac hardware that is under AppleCare or warranty as it might be voided. Proceed at your own risk and education.

  • I can't get my Windows 7 pc to recognise my old LG VN251 phone via USB.   The verison software upgrade assistant runs and my phone is up to date.   I do get a window that pops up that says I can either run the bootstrap or look at the files on the phone,

    I can't get my Windows 7 pc to recognise my old LG VN251 phone via USB.   The verison software upgrade assistant runs and my phone is up to date.   I do get a window that pops up that says I can either run the bootstrap or look at the files on the phone, but I cannot see any photos.   Thoughts?

    We want to make sure we move your pictures to your computer schpee! Do you have a memory card on your phone? If your pictures are not on your http://vz.to/1OvJVey memory card we would want to move them. After you move them than try http://www.verizonwireless.com/support/knowledge-base-45147/ to move them to your computer. Keep us posted.   AmberF_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • I bought and downloaded some music off of the internet on my laptop that uses Windows 8. How can I get my music to open automatically in my itunes instead of opening in the music app?

    I bought and downloaded some music off of the internet on my laptop that uses Windows 8. How can I get my music to open automatically in my itunes instead of opening in the music app (the orange sqaure with headphones)? Currently I have had to often downloads and sift through all my files to find the ones I want to open into itunes, and it's irritating.

    Media is only where the user puts it.
    Installing iTunes does not and has never caused media to magically appear on the computer.
    Copy the ENTIRE iTunes folder from the old computer (or backup of the old computer) to the new computer.

  • How can i run a windows based program on mac book pro

    Can I run a windows based program on mac book pro mountain lion 10.8.4

    You can use bootcamp to install windows natively on the hard drive.  You then choose which OS you wish to use at startup - OS X or Windows.
    You can also install Windows in a virtual machine - Parallels or VMWare Fusion - and run it simultaneously with OS X (a virtual machine is just a PC emulated in software, and you install and run windows in the emulated machine hardware).

  • I bought the Mac version of Premiere Elements, can I get the Windows version for free or cheap with my serial number?

    I bought the Mac version of Premiere Elements, can I get the Windows version for free or cheap with my serial number? I'm about to migrate back to PC soon and I'd love to not have to buy the program again since I just bought it. Under my order history though it only shows it for Mac so I wanted to make sure.

    ihavea4
    The boxed packaging is not sold by Adobe direct. If you want to explore that type of purchase which offers the perk of a Windows and a Mac installation disc, you need to purchase from an authorized reseller who is not going to offer you "upgraded pricing". The seller would be its own entity with its own pricing and own return/refund policy. Sometimes the authorized reseller price may be less than the Adobe"upgraded pricing".
    Did you purchase your Premiere Elements 13 Mac from Adobe direct and are within 30 days of purchase? If so, you can contact Adobe Chat Orders to ask for return/refund. And, then you can explore the authorized resellers for pricing and availability of the box packaging. Maybe check out the pricing all around before making any final decisions.
    Please review and consider.
    Thank you.
    ATR

  • Where Can I Get A Windows 7 Logo For My T500?

    Hello,
    I just got my T500 with Vista. I'm anxiously awaiting my W7 upgrade. Where can I get the Windows 7 logo / sticker to replace the Vista one? Thanks.
    Bob Helms

    There seem to be available on ebay
    Cheers and regards,
    • » νιנαソѕαяα∂нι ѕαмανє∂αм ™ « •
    ●๋•کáŕádhí'ک díáŕý ツ
    I am a volunteer here. I don't work for Lenovo

  • How can I get a Windows Vista 32 bit version of Photoshop, please?

    How can I get a Windows Vista 32 bit version of Photoshop, please?

    Hi Kevinhannan,
    No current Photoshop supports this configuration.
    Photoshop CS5 was the last version of Photoshop to support Windows Vista.
    Photoshop Elements 12 was the last version of Photoshop Elements to support Vista as well.
    We no longer offer Photoshop CS5 or Elements 12.
    You might look at Amazon to see if you can get either product listed above. Just be careful when purchasing, make sure you know who you're buying from!
    Regards,
    Pete

  • How can I get a flash based plugin to load in CC 10.x

    Hello
    How can i get a flash based creative suite plugin to load in Indesign CC 10.x?
    I can get It to load in CC, but not In CC 10.x. Im using Flashbuilder 4.5. Do I need a newer version of flash builder/extension builder?
    Best regards
    / Pontus

    Yes, you can!
    You need to make sure that you are using: "Adobe CSAW Indesign" and not "Adobe CWSAW".
    Also you need to hack the manifest.xml and write someting like this:
    <HostList>
                <Host Name="IDSN" Version="[7.0,10.9]" />
    </HostList>
    To get it to load in CC 14.
    / Best regards
    Pontus

  • Is there any way how i can download and run Window based games, with out installing Windows-thus Bootcamp? and if so, is it free?

    is there any way how i can download and run Window based games, with out installing Windows-thus Bootcamp? and if so, is it free?

    No, you must install Windows to run Windows software. You do not need to use Boot Camp (yes, it's free because it comes with OS X.)
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    Install the Apple Boot Camp software.  Purchase Windows XP w/Service Pak2, Vista, or Windows 7.  Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows.  Boot Camp enables you to boot the computer into OS X or Windows.
    Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  Parallels is software virtualization that enables running Windows concurrently with OS X.
    VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7.  VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    CrossOver which enables running many Windows applications without having to install Windows.  The Windows applications can run concurrently with OS X.
    VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris.  It is not as fully developed for the Mac as Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • I have an hp office jet 4500 and os maverick 10.9.4 and I can't get it to print after last upgrade, multiple malfunctions and error, help?

    I have an hp office jet 4500 and os maverick 10.9.4 and I can’t get it to print after last upgrade, multiple malfunctions and error, help? I have tried deleting and resetting printer and re-installing update 6 times. Last update attempt showed none available??? I can’t load the software directly from HP because their only option is to use the software update option on the mac....frustrated!!! Help!!
    I get blank pages that just run through the printer and a stats window that just 33% complete and goes no further.

    I am going on the guess that an old driver is still installed...
    Use Finder Go > go to folder, and go to /Library/Printers and delete the HP folder(s).
    Reset the Printing System:
    OS X Mavericks: Reset the printing system
    Now, Add the printer in Print & Scan prefs.

  • I can't get my iphone to appear under devices in itunes and i have followed the directions and support provided by apple-any suggestions?

    I can't get my iphone to appear under devices within itunes, my iphone appears as my ipod under devices therefore I am unable to sync my music etc onto my iphone. any suggestions???

    iPhone 4S and Windows XP the first thing that jumps to mind is that the iPhone 4S needs a USB 2.0 connection to sync with iTunes. Check your computers user guide to see if the PC has a compatable USB 2.0 input.

  • How can i get thes songs from ipod nano to the itunes libary??

    hi
    i have ipod nano and i sync it with over 500 songs .....my bad i lose all that songs on my libary  .... how can i get thes songs from ipod nano to the itunes libary??

    See this older post from another forum member Zevoneer on different ways to copy content from your iPod to your computer.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

Maybe you are looking for

  • How do I make 29.97fps look like film?

    Sorry for the novice questions, but all of my footage has been shot on a relatively inexpensive camcorder which records at 29.97fps. Is there any easy way to make it look like a 24fps film when I play it back on my NTSC television? I am relatively ne

  • Hi There how do i save documents from an e mail to my ipad?

    Hi There How do i save documents/attachments from an e mail to my ipad?

  • Error in write step of PA_TIME object archival

    Hi All, I doing archival for the object PA_TIME and I have a queries in that, When I schedule the write step, the job is cancelled and I got an error stating "Archiving group 000000 not found in T51B1 and/or T51B2".  I checked both the tables, there

  • Variable Screen for query view is hidden

    Hi All,    I caome across an old query in BW 3.5 which is haiving some mandatory variables. There is a query view for the same query but when i am executing the query view i didn't got any variable screen and its running for some predefined value. Ho

  • Calling a javascript function from Flash

    Maybe someone out there can help? I'm trying to set a variable in AS3 and then use an event to call that variable.  The links are set in an xml file.  I have it working with hyperlinks using navigateToURL, but it's not doing exactly what I want.   Wh