I can't get on my mac it flashes a folder with a question mark

I have an Imac with Leopard installed, my computer is several years old and it started to act up, it froze in the middle of my working on it and I had to force quit and another time I had to just shut it down. This happened a few times and the last time the screen came on with a gray folder with a question mark in the middle, flashing, what can I do and not lose my work and pictures?
Help..

Start by booting into Safe Mode. Then follow these instructions to reinstall Leopard without having to lose your files:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Similar Messages

What is the problem when I turn on my macbook and all I get is a picture of a file folder with a question mark in it?

First my Macbook is almost 5 yrs old and is probably on it's last leg. The other day it froze and was making some pretty loud clicking noises. I turned it off by holding down the power button and tried starting it up again. At that point the screen was just blue and the noise came back on. Then a file folder appeared in the middle of the screen with a question mark in it. Does this mean the hard drive crashed or something? We blew a hard drive once before (though it didn't happen like this) but I just wanted to check before I go to the store. If it's something that is bad then I may just be sending this one to the grave and replace it with an iPad. Any insight into this problem would be appreciated. Thanks.

That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
Put your install DVD into the optical drive (CD/DVD drive) and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

IMac won't restart. Agreed to updates, rebooted and now only getting a white screen w/ flashing file folder w/ a questions mark?

I Agreed to recent updates, restarted my computer and all I am seeing is a white screen w/ a small flashing file folder icon w/ a question mark on it? I've already unplugged, turned on/off and disconnected/reconnected Apple airport?

Hi barnstorming7,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like the computer boots to a flashing question mark. I would recommend that you read this article, it may be able to help the issue.
A flashing question mark or globe appears when you start your Mac - Apple Support
Cheers,
Mario

My computer froze so I restarted it and now all I can get is a flashing folder with a question mark, what is happening?

I have a MacBook pro and I need help getting it restarted. It flashes a folder with a question mark in it what is wrong with it, any suggestions

You either need to run a disk repair program on the hard disk, or reinstall the OS on that drive. Both of there require a recovery partition or a Mac OS X install disk.
(69883)

Cannot get into mac. I get a white screen and flashing file folder with question mark inside. What can I do?

2012/13 MacBook Pro froze up, so I did a hard shut down. Now, when I try to start up, it makes 3 unusual beeps, then I get a white screen. After a couple minutes, a flashing file folder with a question mark appears and remains. What is wrong and what can I do to fix it.

Three beeps usually means a RAM or RAM slots problem. The Question Mark means there is no bootable system found.
A flashing question mark or globe appears when you start your Mac
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark or globe appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Late 2008 macbook 13" prompts mac OS can not be installed on this computer after booting from disc as l get the folder with the question mark screen. New HDD or ?

From the little research l have done, l have been convinced l may be having a dead hard drive though after having tried all the other troubleshooting tips found here, when trying to boot l get the grey screen and folder with the question mark suggesting it can not find the files neccessary to boot hence l tried booting with the disc and the message l get is that mac OS X can not be installed on this computer, though after doing the hardware check etc they all say okay. I've even tried erasing the drive and trying to instal the OS afresh with no luck. Any ideas or l must just get a new hard drive?

Pretty sure BGreg hit the nail on the head. If your hard drive was failing, you would still be able to at least attempt an install, provided your ard drive was mounting. You usually get that message when the disk is incompatible with the computer. If it is the proper disk, you might try erasing the disk (provided your info is backed up) using Disk Utility (under Utilities in the menubar) and choose the Mac OSX Extended (Journaled) format.

Just installed new hard drive in mac book pro 15", when trying to boot OSX from original disk I still get a folder with a question mark in it. How can I reinstall the OS?

Can't seem to get my mac book to boot from the CD after installing new hard drive.
I keep holding down "c" while restarting the machine with the disk in but it just keeps ejecting the disk and giving me a folder with a question mark.

If your on 10.5 with a Intel Mac, I think Apple has jinxed the firmware so you can't boot from the 10.5 disk anymore.
So far several people, myself included, can't boot from a 10.5 OS X disk on a Intel Mac.
Your going to have to buy a 10.6.3 Snow Leopard retail disk, it's wayyy better than 10.5 anyway, faster and most stable even better than Lion. Have to buy iLife though as it doesn't come on the 10.6.3 retail disks, only free with grey disks.
http://store.apple.com/us/product/MC573Z/A
https://discussions.apple.com/message/16276201#16276201

HT1310 when i starst my mac i get a flashing folder with a question mark. i tried rebooting and holding the option button then i get 2 boxes, one with a refresh arrow and one with a forward arrow neither of them seem to do anything. now what

when i starst my mac i get a flashing folder with a question mark. i tried rebooting and holding the option button then i get 2 boxes, one with a refresh arrow and one with a forward arrow neither of them seem to do anything. now what

Here is an article that describes what it is supposed to do:
Startup Manager: How to select a startup volume
If no Volumes are shown, it is telling you there are no potentailly bootable Volumes attached. That means your boot drive has died or the bootable image on it is unrecognizable.
What Mac Pro ? by year, GHz, number of processors, screen size?
What Mac OS X ?

I replaced the battery on my RAID card, when I booted my mac pro up, I get the folder with the question mark. I used a boot USB drive to boot and when I looked in the RAID utility, my RAID 5 volumes were no longer showing, advise.

I replaced the battery on my RAID card, when I booted my mac pro up, I get the folder with the question mark. I used a boot USB drive to boot and when I looked in the RAID utility, my RAID 5 volumes were no longer showing, advise.
Ernest

Not sure if I'm following you. I have 4 hard drives installed on my Mac Pro. I had a RAID 5 configured and functional for about 5 months. My battery died on the RAID card. I replaced the battery, seated the RAID card back in the slot I removed it from. When I booted to the USB drive to look in the RAID utility, I could see the battery is charged but my volumes are not showing.
The drives don't show in disk Utility. I built the RAID with the RAID Utility and they did show there. I have a early 2008 Mac Pro, Mavricks OS running Mac Server

When I start my Mac air I get a flashing folder with a question mark

I am trying to start my Mac air and I get a flashing folder with a question mark. When I turn the power of it shuts down but wen starting it comes back

Just being clear about your situation. When you hold down Option during boot it does not show a system volume or a recovery volume from which to boot. At that point if you select a network boot and you do not see a spinning globe that persists there a good while as it loads the recovery partition over the network. True?
A couple of more thinks to try:
Disconnect all of your external devices.
Reset PRAM
Boot with the option key again.
Standard things to try (which is sounds like you already have attempted) A flashing question mark appears when you start your Mac

I just powered on my mac book pro and have a blue screen with a flashing folder with a question mark in the middle, how do I get out of this?

I just booted my mac book pro and it is at a blue screen with a flashing folder with a question mark in the middle of it. How do I get out of it?

Click here and follow the instructions. If the computer was running Mac OS X 10.6.8 or earlier and you reach the third set of steps, insert a Mac OS X install disk.
(126818)

Hello, can someone help me: my eMac G4 700 MHz. I can not boot it. If he starts appears on the screen, only a small "folder with a question mark." The Mac was not used 1 year. Question 1: Problem = hard drive? Question 2: Problem = PRAM battery? the What

Hello, can someone help me: my eMac G4 700 MHz. I can not boot it. If he starts appears on the screen, only a small "folder with a question mark." The Mac was not used 1 year.
Question 1: Problem = hard drive?
Question 2: Problem = PRAM battery?
the
What can I do to boot?

Restart with the Option key held down.
If the internal drive shows up, it's the PRAM battery.
If it doesn't, insert a compatible Mac OS 9 or X install disk, click the button with the circular arrow, and either repair the internal drive or install a new OS on it. If it doesn't show up in Disk First Aid(9) or the Disk Utility(X), it's either not plugged in or needs to be replaced.
(97530)

I erased my HD and could not install lion. if I turn on the mac now all I see is a folder with a question-mark. How can I install a new operation system?

I erased my HD and could not install lion. if I turn on the mac now all I see is a folder with a question-mark. How can I install a new operation system?

Install or Reinstall Mavericks, Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
        the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion, Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

My Mac keeps locking up and when I restart, I get white screen with just a folder with a question mark in it???

If my computer displays a white screen with a folder with a question mark in it...what does this mean?

Hi Pattib123,
The flashing question mark says it can't find a valid system to boot from. Check out this article.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Thank you for visiting Apple Support Communities.
Nubz

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help?

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help? FYI: I have been using boot camp with windows 7 and started getting a kernal_data_Page_error and it would reboot windows, i was trying to do a chkdsk on the next reboot, but thats when i started getting this issue. I have put in a new hard drive and went from 2 gigs to 4. I can not get the computer to do anything, even the monitor does not show anything now????

Prep your new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs,) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
After formatting has completed quit DU and return to the installer. Install OS X.

I can't get on my mac it flashes a folder with a question mark

Similar Messages

Maybe you are looking for