I can't get on to app store or itunes store with my Mac Book Pro after changing to OS X Mavericks, any solutions?

I doenloaded the Mavericks yesterday and since then, I couldn't get on to itunes store or app store or browse the web by safari since then.
However, I can use chrome to get on to all the websites, so it's not the connection problem, anyone knows what to do, cos I am really stuck and starting to regret updating to Mavrericks.

Hello Gambo12,
It sounds like you are getting the following error in iTunes and the App Store, "iTunes could not connect to the iTunes Store. Make sure your network connection is active and try again," but you are able to connect to the Internet.  I found an article with a few steps you can follow on your Mac:
If you haven't been able to connect to the iTunes Store, a software conflict or your Internet service provider (ISP) may be blocking your access.
Update iTunes to the latest version.
If you have a firewall, your settings may be preventing you from connecting to the iTunes Store. To configure your firewall, please refer to the "Blocked by firewall" section in this article.
You may need to reset your keychain. Connection issues are occasionally caused by keychain issues. Click here to find out how to use Keychain First Aid to resolve any issues with your keychain.
If you are receiving a specific error message you may want to see, the "Specific Conditions and Alert Messages" section in this article as needed.
If the issue still persists, contact your internet service provider and confirm that the ports and servers in this article are enabled over your network.
You can find the full article here:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Similar Messages

  • Can i get OS X LION for free if i bought my mac book pro in July 2011?

    i would like to know if i can get OS X LION for free if i bought my mac book pro in July 2011 ? thx

    Apple - OS X Lion - Get up to date.
    If you use an PowerPC apps / Rosetta read here first >  Lion upgrade questions and answers:  Apple Support Communities

  • Can not get external hard drives to connect to my computer 17" Mac book Pro 10.7.5

    can not get external hard drives to connect to my computer I am using a 17" Mac book Pro 10.7.5.
    I have 2 iomegas and 1 LaCie. Changed cables. I can feel the external hard drives running and
    I can hear them running but I can not get them on the computer any more. They did work at one time.
    Can any one PLEASE help?

    Nothing appear on my desktop. 
    I did Repair and Verify the HDDs in Disk Utility>First Aid from the
    Utilites App about a dozen times ans they all said everything was good
    except for the last time there were erors found and I ran the
    Disk Utility from the Start Up Disk and the repairs were made and everything
    was subposed to te good and still Nothing on the desk top.
    Ginger

  • Can't get iPhoto 9.3.4 to update on my new Mac book pro. Keeps saying an error has occurred. Any suggestions

    Can't update new Mac book pro with iPhoto 9.3.4. Any suggestions?  Keeps saying an error has occurred.

    Try using this updater manually: iPhoto 9.4.3
    Or if you're having problems with the App Store you might try this:
    1 - enable the Debug menu in App Store:
    open the Terminal application.
    copy the command below and paste into the Terminal window:
    defaults write com.apple.appstore ShowDebugMenu -bool true
    followed by Enter.
    launch App Store, login.
    2 - select the Debug ➙ Reset Application option:
    3 - try again.
    OT

  • Can i get a free os lion if i have bought my mac book pro 2 weeks after the launch of the os lion

    hi .  i bought a mac book pro from the US . it came witht the older os . offcourse assuming that this would have been packed in china before the launch of os lion . would i have to buy the os lion or is there any way of getting an upgrade without paying for it

    See
    http://www.apple.com/macosx/uptodate/

  • HT1338 I cant get my iphone 5 to be compatible with my mac book pro. I've been trying to update my itunes but it wont let me because it tells me i dont have the right software is there anything that I can do so I can sync my phone to computer?

    I cant get my iphone 5 to be compatible with my mac book pro. When I plug the iphone 5 in it tells me that i need a newer version of itunes 10.7 and I currently have 10.6. I checked for updates in my itunes and it says i dont have any. So i have gone to the itunes website to try and redownload itunes which i believe it 11.7. When I try and download that version it tells me the software on my computer doesn't suppor that version. I try to update my software and it says there is not software updates available right now.  Is there anyway I can get my iphone 5 to synce to my itunes?

    In order to get those to work you will have to upgrade to Snow Leopard 10.6.8.
    Start by checking if you can run Snow Leopard:
    Requirements for OS X 10.6 'Snow Leopard'
    http://support.apple.com/kb/SP575
    The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    and in the UK:
    http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
    but nobody knows for how long it will be available.
    When you have installed it, run Software Update to download and install the latest updates for Snow Leopard, preferably the full 10.6.8 combo updater.

  • Hi there i downloaded osx and i have just found that i can download it for free as i have recently just brought my mac book pro how do i get a refund?

    hi there i downloaded osx and i have just found that i can download it for free as i have recently just brought my mac book pro how do i get a refund?

    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support visit online support site.

  • I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?

    I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?

    The battery is fully charged so it is not the problem.
    What happens when you use the MagSafe?

  • I need to use an hp 6215 printer with my mac book pro.  the driver installation disk doesn't work.  where can i get a driver that will work?  i use OS X

    i need to use an hp 6215 printer with my mac book pro.  the driver installation disk doesn't work.  where can i get a driver that will work?

    With the Lion it is essentially unnecessary to resort to external driver disks. What's more, most of those disks are incompatible with the OS and should not be used. The system already carries a wide variety of printer description files (aka PPDs, which is what modern printing systems use as "drivers") for a lot of brands. And there was an HP printer update just two days ago.
    Just checked in mine and did indeed find that the HP OfficeJet 6200 Series, with or without Fax, is covered with the latest update.
    So just go thru the motions of creating a proper printer instance:
    Make sure the Mac "sees" the printer on the network.
    System Preferences / Print & Scan
    Click on the + button on the left column
    Select the appropriate type of printer, will use IP for the rest of this
    Select HP Jetdirect - Socket, default for HP network printers
    Type the IP address or look it up
    Name the printer for easy identification on the print dialog
    Let the Mac identify the printer model or manually choose the driver
    Click Add.
    Once the instance pops up in the list, can click on Options & Supplies for further config.

  • Help I tried opening my Mac book pro after shutting it down and all I get is a grey screen with the apple sign and a moving mouse but I can't open it !! What should I do ??

    Help I tried opening my Mac book pro after shutting it down but it won't open and all I get is a grey screen and a mo Jong mouse but nothin else so can u help me ??

    Hey HJA96,
    Thanks for the question. I understand that your MacBook Pro is booting to a gray screen. The following article addresses this symptom, and provides relevant troubleshooting information:
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/TS2570
    Some of the steps included:
    - Disconnect, test peripheral devices and network cables
    - Perform a Safe Boot
    - Reset the NVRAM / PRAM
    - Start from your Mac OS X Install disc; use Disk Utility
    - Check your cables and power source
    - Remove third-party RAM and internal hardware
    - Perform an Archive and Install installation of Mac OS X
    - Perform an Erase and Install installation of Mac OS X as a last resort
    (See article for full information on all of the above)
    Thanks,
    Matt M.

  • Hey guys on my mac book pro after updating three apps wont leave my dock, when i close them they just re-appear they are "LoginServer", "USBServer" and "NetServer" any ideas to what is the issue?????? PLEASE HELP.

    Hey guys on my mac book pro after updating three apps wont leave my dock, when i close them they just re-appear they are "LoginServer", "USBServer" and "NetServer" any ideas to what is the issue?????? PLEASE HELP.

    Hi I have just got back from the apple store and the guy at the Genius bar looked at it and said it was a manufacturing fault, and because it has been like it since new, and seemed to be getting worse he replaced the computer  and I have a new warranty from today.
    We got the feeling as soon as he looked at it that he has seen this before, I did say to him I was concerned it would be a replacement screen and I was not really happy about that as it was so new, and he said that was the normal procedure, but as the fault was already there at new and it was getting worse they would replace. I could not have asked for a better service.
    Not unpacked this one yet but am hoping all is good, its a great little machine.
    Thank you for your responses, and I hope this might help someone else.  One thing it did not seem to be missing pixels but something to do with the screen production?

  • How can I do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder which does not have firewire out/input? it comes only with a component video output, USB, HDMI and composite RCA output?

    I need to do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder (http://store.sony.co...ber=HDRAX2000/H) ..this camcorder model does not have firewire out/input ..it comes only with a component video output, USB, HDMI and composite A/V video output..
    I wonder how can I plug this camcorder to the firewire port of my laptop? Browsing on internet I found that Grass Valley Company produces this converter http://www.amazon.co...=A17MC6HOH9AVE6 ..but I am not sure -not even after checking the amazon reviews- if this device will send the video signal through firewire to my laptop, in order to live streaming properly? ..anyone in this forum could help me please?
    Thanx

    I can't broadcast with the built in iSight webcam... how would I zoom in or zoom out? or how would I pan? I've seem people doing it walking with their laptops but that's not an option for me... there's nothing wrong with my USB ports but that's neither an option to stream video because as far as I know through USB you can't connect video in apple operating systems ..you can for sure plug any video cam or photo camera through usb but as a drive to transfer data not as a live video camera...  is by firewire an old interface developed by apple that you can connect all sorts of cameras to apple computers... unfortunately my new sony HDR-AX2000 camcorder doesn't have firewire output...
    thanx

  • How can I do to transfer all iTunes library from my Mac book Pro to Time capsule without to lost the alphabetic sequence of songs

    How can I do to transfer all iTunes library from my Mac book Pro to Time capsule without to lost the alphabetic sequence of songs & artists? What is the correct way to transfer my 3000 songs to Time capsule, to free the memory of my Mac? Thanks a lot. Carlo Molinari (Rome - Italy)

    How can I do to transfer all iTunes library from my Mac book Pro to Time capsule without to lost the alphabetic sequence of songs & artists? What is the correct way to transfer my 3000 songs to Time capsule, to free the memory of my Mac?
    The following are the basic steps to transfer your iTunes Media folder from your MacBook Pro to the Time Capsule (TC). Note: You will leave the iTunes Library, and its associated files, on the MacBook Pro as you will only be moving the media files.
    Be sure to shutdown iTunes before starting.
    Next, move the "iTunes Music" folder, located in ~/Music/iTunes/, to wherever you want on your TC's internal hard drive. Remember to leave the Album Artwork folder, as well as the three individual library files where they are on the MacBook Pro.
    Wait a while. If you have a large library, this will take a bit of time.
    Once the iTunes Media folder has been transferred, open iTunes. Note: It will still be looking at your local iTunes Library on the MBP. As such it will think that the iTunes Media folder is still on the MBP as well. However, we just relocated it to the TC. If you attempt to select any song, you will get an error that the song is "missing." Not to worry, we will correct this in the next step.
    We need to tell iTunes the media has moved to the TC's internal HDD. To change where iTunes "looks" for the media, open iTunes and go to the Advanced > General tab and use the "Change..." button to tell it where your new "iTunes Music" library is located.
    Once this is done iTunes will likely pop up a progress window telling you that it's re-analyzing your library. Let it complete this step.
    As a final check to make sure everything when as planned, click on any library file from within iTunes and press cmd + i (or View > Get Info). At the bottom of the Summary tab in that window is a "Where:" section that tells you the actual file path to that piece of media; be sure that path begins with the name of your TC's drive, and not "Macintosh HD."

  • How can I do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder ..that doesn't have firewire out/input?

    I need to do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder (http://store.sony.co...ber=HDRAX2000/H) ..this camcorder model does not have firewire out/input ..it comes only with a component video output, USB, HDMI and composite A/V video output..
    I wonder how can I plug this camcorder to the firewire port of my laptop? Browsing on internet I found that Grass Valley Company produces this converter http://www.amazon.co...=A17MC6HOH9AVE6 ..but I am not sure -not even after checking the amazon reviews- if this device will send the video signal through firewire to my laptop, in order to live streaming properly? ..anyone in this forum could help me please?
    Thanx

    I can't broadcast with the built in iSight webcam... how would I zoom in or zoom out? or how would I pan? I've seem people doing it walking with their laptops but that's not an option for me... there's nothing wrong with my USB ports but that's neither an option to stream video because as far as I know through USB you can't connect video in apple operating systems ..you can for sure plug any video cam or photo camera through usb but as a drive to transfer data not as a live video camera...  is by firewire an old interface developed by apple that you can connect all sorts of cameras to apple computers... unfortunately my new sony HDR-AX2000 camcorder doesn't have firewire output...
    thanx

  • Can i install windows 7 and OS X together on the same Mac Book Pro?

    can i install windows 7 and OS X together on the same Mac Book Pro?

    You can do it either using Boot Camp or by running a virtual machine, such as Parallels Desktop (which I use) or VMFusion. I prefer the VM method, as I don't have to reboot using the handful of Windows applications that I use. And I can access my Windows apps just as I do my Mac apps - copy and paste between them, etc.
    I just upgraded from Parallels 7 to 8 and I'm quite happy with it, running Mountain Lion on a late 2011 MBP with 16GB of RAM and a 512GB SSD. I also have a 27" Apple Thunderbolt Display and there are no problems with video drivers, etc.
    If I were you - unless I needed every inch of performance that running Boot Camp can bring - I'd go with a VM to run Windows. I can attest to the functionality of Parallels - perhaps others with experience with other VMs will chime in.
    Clinton

Maybe you are looking for