I can't get rid of 169 ip addresses on devices

I am having problems with computers and iOS devices using a 169.x.x.x address instead of the DCHP address supplied by Charter. This started just recently. The only thing that has changed is I installed Lion a few weeks back.
I have gone through three modems or modem/router combos. Two different motorola modem/routers and now the rented modem only motorola from Charter. None of that made a difference.
I have removed all AppleTV’s from the network. I have replaced a hub switch with another one. I have reset computers, renewed leases, started with one device and added more and tested each one. Nothing really seems to work.
This is what I have right now. My main work computer is hard wired to the modem via the switch and is connected to the internet. The family computer is also hard wired and is getting the 169 address. I have two network printers that both are not working. You can see them but you can’t print to them. My iphone and ipad are not working right now because I took the Airport Xtreme router offline to solve the problem.
Now I am at the end of my rope. Any thoughts on these last two ideas.
1. Get a static IP from charter and assign my own addresses.
2. Use my Airport Extreme as the next device after the modem and in place of my switch.
Any thoughts?
Shawn

#2 is the right idea. You need to reconnect AirPort Extreme even if you're not using Wi-Fi.
Your computers and printers used to get their LAN IP addresses from AirPort Extreme. With that out of the picture, those systems and peripherals self-assign 169.* addresses.
For Charter to be happy, only one device should request an IP address from the cable modem. In your configuration, that should be your AirPort Extreme. Whenever you change the device that's plugged into the modem, you may need to power down your modem for as long as 30 minutes to get it to recognize the new configuration.
Here's how things should probably be wired:
AirPort Extreme WAN port->cable modem
AirPort Extreme LAN port->LAN switch
Desktops, AppleTV, printers, etc.->LAN switch / Wi-Fi
If you have enough Ethernet ports on your AirPort Extreme to accommodate all your devices, skip the switch and do this:
AirPort Extreme WAN->cable modem
Desktops, AppleTV, printers->AirPort Extreme LAN ports / Wi-Fi
If these arrangements seem not to work, reset your AirPort Extreme to its factory settings, cycle power on the cable modem and AirPort Extreme and try again.
Best of luck to you.

Similar Messages

I can not get rid of a iCloud address in my drop-down from mail window

Email address wrong in mail on drop-down from window. The email was created as an alias in icloud but one leter is a mistake. I corrected this mistake with new address but can not get rid of old address and its not in icloud mail either.
Can you help.
End of tether
Morgan

morgan d falcon wrote:
drop-down from window
Sorry, I misunderstood. Apple calls it "the From pop-up menu" — see under Set the From address in this Apple doc:
Mail (Mavericks): Address messages
...Presumably if follow the instructions there and set "Send new messages from" to the address you want, you won't then need to click on the "From pop-up menu" and see the incorrect address.
Perhaps someone else here knows how to remove the incorrect address completely — or try clicking on "Manage your Apple ID" here:
My Apple ID

Can't get rid of old email address

Since purchasing my iPad, I changed internet carriers and changed my email address. If I go to iTunes & App Store in Settings on my iPad, it still says my Apple ID is the now invalid email address. Can't get pass that point. Wants me to put in a Password for that ID that no longer exists.
Created a new Apple account to no avail.

The last thing that you want to do is to create a new Apple ID since purchases are always tied to the Apple ID that was used to make the purchases. You want to change the old Apple ID email address to the new one.
Did you follow these instructions to change your Apple ID?
Change your Apple ID - Apple Support
If you followed those instructions and all went as it should, you can sign out of your old ID in settings>iTunes and App Store>Apple ID. Then sign in with the new ID. You should also take a look at this.
Apple ID: What to do after you change your Apple ID - Apple Support

Can't get rid of old email address when signing in

How come when I try to log in to my App Store my old e mail address always pop up even though I have deleted that email address, and put my new one in on the manage page.

Hi Rvwsix,
Welcome to the Support Communities! Are you trying to sign in on your Mac or from an iPhone or iPad? The article below will explain how to sign out of your account and sign in with the correct Apple ID and password.
iOS: Sign in with a different Apple ID in the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/HT1311?viewlocale=en_US
I hope this information helps ....
- Judy

How can I get rid of error message?

Have tried to set up my pop3 email on my 6700 slide using the same settings I've always used on previous phones/pc and for some reason emails just won't send. However my main problem is that I keep getting a message flash on screen saying 'Unable to send message:[Email address]. As soon as I clear it, it comes back about 2 seconds later and just won't go away. Stops me doing anything on the phone as I have to keep clearing the message every few seconds. I've gone into drafts/outbox, every folder I can find in 'Messaging' and there's no copy of the email to even delete it. I've even gone to my mail server on the web and the message isn't showing. From the mailbox itself on the phone, I've tried to folders under 'More folders' but there's nothing showing - no sent or drafts folders. How can I stop this error message appearing every 2 seconds?

Hello, Sorry to hear that you can't get rid of this message from your device. I suggest you try going to http://email.nokia.com and register there. I think you'll find your email experience much more to your liking there.
Chris McK - Nokia Messaging/Social Product Marketing

I have a 192 ip at home but I can't get rid of the 169 ip from my iPhone. My Mac perfectly connects to the wifi but my iPhone doesn't seem to connect to it. Please help.

I have a 192 ip at home but I can't get rid of the 169 ip from my iPhone. My Mac perfectly connects to the wifi but my iPhone doesn't seem to connect to it. Please help!

EUREKA, I found the solution to my problem in a Discussion initiated by gingertodd on July 27, 2011 entitled "Safari in Lion hijacked by malware." The solution was provided by Badunit who recommended force quitting Safari and then reopening it while holding down the Shift key. It worked instantly, and I subsequently was able to open Safari normally by just clicking on its icon in the Dock. THANK YOU BADUNIT!

Can't get rid of self assigned IP address

Hello,
I have been trying to resolve this problem by myself for the last 4 days (by googling and reading forums) but nothing works so here I am.
I moved last Tuesday and everything worked fine until that day. Since I am in my new apartment, I can't connect to the Internet because of a self assigned IP address. Here is more info:
-I have a new modem since I moved (the apartment where I was living was furnished and had a modem already). However, I am using the same service provider and modem than the apartment I was subletting.
-I only have a modem (no router) and I use the Ethernet to connect.
-I am writing this message from a PC laptop which confirms that the modem is working fine and that the ethernet cable is fine, etc.
-I did many rounds of shutting down the computer, renew DHCP, unplugging the modem (from 1 minute to 10 hours) and plugging everything back.
-I called the ISP but they could not help (they just repeated the same instructions that I could find in the guide)...They have no idea how I can get rid of the self assigned IP address.
The problem is still the same, I can't get rid of the self assigned IP address (169.xxx).
Please help if you know other tricks to fix that issue...
Thanks a LOT in advance!!
Julie

Re 1) Setting up a new account won't solve the problem in itself but it will help narrow down the cause. The idea is this: the problem might be caused by something system-wide (e.g. a preference file in /Library/Preferences) or it might be caused by something that is specific to your account (e.g. a preference file in yourhome/Library/Preferences). If we knew which, we could target the troubleshooting appropriately. The easiest way to figure out which is to create a new user, log in as that user and see if the problem remains. If it does, it must be system-wide; if not, it is specific to your account.
Are you using any firewall software? If you are using Tiger's built-in firewall, how is it configured?
- cfr

How can I get rid of the "Reset Search" app?

I have a Macbook Pro and I run Mavericks OS X 10.9.5. There's an application in Launchpad called "Reset Search".See picture 1. I know this is part of the "Install Mac" adware, but I still can't find a way to get rid of it. I downloaded Adware Medic to try and remove the adware but it said that it couldn't find anything. I also tried a manual removal following the steps from http://www.thesafemac.com/arg-genieo/, where it says to remove the file "/private/etc/launchd.conf" but I can't find that file anywhere. I'm scared to continue because it says, "Failure to properly remove this file, if it is present, will result in your computer freezing and becoming unable to start up!" Also way before I knew this was adware I reset the browser settings a few times using the pop up. See Picture 2.

Problem description:
Accidentally downloaded the adware “Install Mac” and can’t get rid of it because I can’t find any traces of it, except for the “Reset Search” app on Launchpad.
EtreCheck version: 2.1.8 (121)
Report generated April 17, 2015 at 5:27:29 PM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Mid 2012) (Technical Specifications)
    MacBook Pro - model: MacBookPro9,2
    1 2.5 GHz Intel Core i5 CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Check Battery - Cycle count 629
Video Information: ℹ️
    Intel HD Graphics 4000
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.9.5 (13F34) - Time since boot: 3:17:9
Disk Information: ℹ️
    APPLE HDD HTS545050A7E362 disk0 : (500.11 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 499.25 GB (461.96 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    HL-DT-ST DVDRW GS41N
USB Information: ℹ️
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Anywhere
Launch Agents: ℹ️
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    Default Browser: Version: 537 - SDK 10.9
    Unity Web Player: Version: UnityPlayer version 4.6.1f1 - SDK 10.6 [Click for support]
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
    JavaAppletPlugin: Version: Java 8 Update 25 Check version
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Java [Click for support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
        29%    com.apple.WebKit.Networking
         9%    WindowServer
         4%    Safari
         2%    mdworker
         1%    PluginProcess
Top Processes by Memory: ℹ️
    176 MB    Safari
    175 MB    com.apple.WebKit.WebContent
    120 MB    com.apple.IconServicesAgent
    82 MB    Finder
    73 MB    mds_stores
Virtual Memory Information: ℹ️
    372 MB    Free RAM
    1.80 GB    Active RAM
    1.50 GB    Inactive RAM
    620 MB    Wired RAM
    670 MB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Apr 17, 2015, 02:55:59 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Finder_2015-04-17-145559_[reda cted].crash
    Apr 17, 2015, 02:09:49 PM    Self test - passed
    Apr 15, 2015, 04:35:46 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-04-15-163546_[redacted].crash

When I login on my When I sign in to a site on my ipad using my email address as ID a short cut of my email address comes up. How can I get rid of it?

When I sign in to a site on my iPad using my email address as ID a short cut of my email address comes up. How can I get rid of it?

You can edit keyboard shortcuts in Settings>General>Keyboard>Shortcuts>Edit.

I have a Australian iTunes account and want to switch to using the u.s store as I now live there, I cannot do this because I have $1.41 still in the oz account an image to have a zero balance to change stores, how can I get rid of the $1.41?

I want to switch to the u.s store as I now live in the us, I cannot switch stores because my balance is $1.41 in the oz store and needs to be zero, how can I get rid of the $1.41 when everything costs more or less than that? I do not have a credit card on the oz iTunes account an I cannot use my us one to top it up.
HELP

Click here and request assistance.
(60992)

I want to switch stores from Japan to USA. I used to have an iTunes card, and there's 15 YEN left in my account, how can I get rid of that so I can start purchasing in the US store using my new credit card?

I want to switch stores from Japan to USA. I used to have an iTunes card, and there's 15 YEN left in my account, how can I get rid of that so I can start purchasing in the US store using my new credit card?

I can't seem to find an app that costs my available balance. iTunes said I need to spend it ALL before I can change stores. This means I cannot totally change stores.... Hopeless.

In ical edit, can you get rid of invitees, availability, url, notes?

in ical edit, can you get rid of invitees, availability, url, notes?

in ical edit, can you get rid of invitees, availability, url, notes?

Can't get rid of a TX - message keeps appearing and being processed by OSB

I have some sort of a poison message or TX I can't flush. Every 10 seconds I get a log message like the second one below, and the number of pending messages in multiple places and OSB proxy service messages processed keep climbing - all without producing any new messages on my part. I've tried deleting the default server store on the OSB managed server and the filestore for the JMS server. No luck.
When this first started happening, the error messages looked like the first one below. Something I did caused the change, I assume. However, it's the same TX ID throughout.
So, first, how can I get rid of this thing? It's driving me nuts and keeping me from closing out a POC.
Second, why is it happening? I have one suspicion - could it be because that somehow we configured mutiple domains with the same name for a distributed application? It's not my normal practice but it happened. These domains don't communicate directly, but there are domains that need to communicate with both. So I'm guessing the name ambiguity may be hurting us. Just a guess, though.
In this case, the sgosb domain's proxy service (this domain name is unique) is receiving messages from a queue resident in the pega_domain in Singapore and another proxy service is putting a message to another queue in the pega_domain in the UK. This is not in a single TX; the first proxy service forwards the message to a queue in the sgosb_domain, the second proxy service gets that message and puts it into the other pega_domain. It's an XA TX for each proxy service.
Just to make it more fun, the sgosb_domain has another proxy service reading from a different queue and forwarding it to a queue in the third pega_domain in the US.
TIA for any help or insight.
Oh yes, the OSB domain is WLS 10.3.4, while the pega_domains are WLS 10.3.2
Original error message
####<Apr 13, 2011 4:32:13 AM GMT> <Error> <EJB> <sg01app510> <sgosb_1> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'>
<<anonymous>> <> <92f54a30d60e6302:-4b6d523c:12f4cfeaabc:-8000-0000000000000123> <1302669133597> <BEA-010026> <Exception occurred during commit of
transaction Xid=BEA1-039B0B6D3D0E77C1B135(1898471720),Status=Rolled back. [Reason=Unknown],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since
begin=0,seconds left=600,XAServerResourceInfo[WLStore_pega_domain_ProcessEventJMS_Store_mgd1]=(ServerResourceInfo[WLStore_pega_domain_ProcessEventJMS_Store_mgd1]=
(state=new,assigned=none),xar=null,re-Registered = false),SCInfo[sgosb_domain+sgosb_1]=(state=rolledback),SCInfo[pega_domain+pega_1]=(state=rolledback),properties=
({}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=sgosb_1+152.64.128.243:22110+sgosb_domain+t3+, XAResources={eis/tibjms/Topic,
WLStore_sgosb_domain_FileStore_auto_1, eis/aqjms/Queue, eis/wls/Queue, eis/tibjms/Queue, WLStore_sgosb_domain__WLS_sgosb_1, eis/AQ/aqSample, eis/aqjms/Topic,
eis/pramati/Queue, eis/sunmq/Queue, WLStore_sgosb_domain_WseeFileStore_auto_1, WLStore_sgosb_domain_MesssageForwardingJMS_Store_mgd1,
WSATGatewayRM_sgosb_1_sgosb_domain, eis/jbossmq/Queue, eis/activemq/Queue, eis/fioranomq/Topic, eis/tibjmsDirect/Topic, eis/wls/Topic,
eis/tibjmsDirect/Queue, eis/Apps/Apps, eis/webspheremq/Queue},NonXAResources={})],CoordinatorURL=pega_1+nj09mhm5078:22111+pega_domain+t3+):
javax.transaction.RollbackException: This transaction does not exist on the coordinating server. It was probably rolled back and forgotten.
        at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
        at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:223)
        at weblogic.transaction.internal.CoordinatorImpl_1032_WLStub.commit(Unknown Source)
        at weblogic.transaction.internal.TransactionImpl$1.run(TransactionImpl.java:331)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
        at weblogic.transaction.internal.SecureAction.runAction(SecureAction.java:72)
        at weblogic.transaction.internal.TransactionImpl.commit(TransactionImpl.java:327)
        at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:252)
        at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:239)
        at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:553)
        at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:424)
        at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:326)
        at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
        at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
        at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
        at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
        at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
        at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused by: javax.transaction.RollbackException: This transaction does not exist on the coordinating server. It was probably rolled back and forgotten.
        at weblogic.transaction.internal.CoordinatorImpl.commit(CoordinatorImpl.java:94)
        at weblogic.transaction.internal.CoordinatorImpl_WLSkel.invoke(Unknown Source)
        at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
        at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
        at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
        at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
The error message I'm getting now
####<Apr 13, 2011 4:51:38 AM GMT> <Error> <EJB> <sg01app510> <sgosb_1> <[ACTIVE] ExecuteThread: '18' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <>
<92f54a30d60e6302:-42808c28:12f4d3173cb:-8000-0000000000000032> <1302670298730> <BEA-010026> <Exception occurred during commit of transaction
Xid=BEA1-0011D0679BA5074B8E12(1930603846),Status=Rolled back. [Reason=javax.transaction.xa.XAException],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=0,seconds
left=60,XAServerResourceInfo[WLStore_sgosb_domain_MesssageForwardingJMS_Store_mgd1]=(ServerResourceInfo[WLStore_sgosb_domain_MesssageForwardingJMS_Store_mgd1]=
(state=rolledback,assigned=sgosb_1),xar=WLStore_sgosb_domain_MesssageForwardingJMS_Store_mgd1239571724,re-Registered =
false),XAServerResourceInfo[WLStore_pega_domain_ProcessEventJMS_Store_mgd1]=(ServerResourceInfo[WLStore_pega_domain_ProcessEventJMS_Store_mgd1]=
(state=rolledback,assigned=pega_1),xar=null,re-Registered = false),SCInfo[sgosb_domain+sgosb_1]=(state=rolledback),SCInfo[pega_domain+pega_1]=(state=rolledback),properties=
({}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=sgosb_1+152.64.128.243:22110+sgosb_domain+t3+, XAResources={eis/tibjms/Topic,
WLStore_sgosb_domain_FileStore_auto_1, eis/aqjms/Queue, eis/wls/Queue, eis/tibjms/Queue, WLStore_sgosb_domain__WLS_sgosb_1, eis/AQ/aqSample, eis/aqjms/Topic, eis/pramati/Queue, eis/sunmq
/Queue, WLStore_sgosb_domain_WseeFileStore_auto_1, WLStore_sgosb_domain_MesssageForwardingJMS_Store_mgd1, WSATGatewayRM_sgosb_1_sgosb_domain, eis/jbossmq/Queue, eis/activemq
/Queue, eis/fioranomq/Topic, eis/tibjmsDirect/Topic, eis/wls/Topic, eis/tibjmsDirect/Queue, eis/Apps/Apps, eis/webspheremq/Queue},NonXAResources=
{})],CoordinatorURL=sgosb_1+152.64.128.243:22110+sgosb_domain+t3+): weblogic.transaction.RollbackException: Unknown reason
        at weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java:1881)
        at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:345)
        at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:239)
        at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:553)
        at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:424)
        at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:326)
        at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
        at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
        at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
        at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
        at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
        at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused by: javax.transaction.xa.XAException
        at weblogic.store.gxa.internal.GXAResourceImpl.prepare(GXAResourceImpl.java:1227)
        at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerResourceInfo.java:1295)
        at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerResourceInfo.java:500)
        at weblogic.transaction.internal.ServerSCInfo.startPrepare(ServerSCInfo.java:380)
        at weblogic.transaction.internal.ServerTransactionImpl.localPrepare(ServerTransactionImpl.java:2593)
        at weblogic.transaction.internal.ServerTransactionImpl.localPrepare(ServerTransactionImpl.java:1321)
        at weblogic.transaction.internal.SubCoordinatorImpl.startPrepare(SubCoordinatorImpl.java:183)
        at weblogic.transaction.internal.CoordinatorImpl_WLSkel.invoke(Unknown Source)
        at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
        at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
        at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
        at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
.>Edited by: SteveElkind on Apr 13, 2011 5:50 AM

Tom,
Thanks! Succinct and easy to understand as ever.
Yup, that covers it - I had also just seen this in the docs after looking at atheek1's earlier response (thanks to him/her as well). It's covered almost as clearly there as you state it here (http://download.oracle.com/docs/cd/E11035_01/wls100/jta/trxcon.html).
While the ESB domains meet all of those requirements (except for cross-domain security configuration), each of the other two sets of domains (3 in each set) do not meet the naming uniqueness criteria for domain and server names; they do for JMS server names. I saw the store names in the TX identifier string as included resource, and assumed they might play a part - that's why I changed them. As you say, an unnecessary change. Oh well - it was an easy one.
My normal practice has been for unique names in the past, due to problems I had years ago with cross-domain JMS traffic in an earlier WLS version. I guess it's the wrong time to have forgotten that lesson.
Does anyone know of a quick way of changing a domain name quickly without rebuilding the domain? In the past WLST resulted in incomplete copies for me, is that still a problem? Server names are easy, just some global search-and-replace in the config.xml file (and in the management scripts, too)
/Steve

I have IPhone 5. Songs on phone do not match songs in my itunes library. Can't get rid of songs on phone because they don't show up in library

I have IPhone 5. Songs on phone do not match songs in my itunes library. Can't get rid of songs on phone because they don't show up in library.

Hi there,
It sounds like you may need to hide these purchases in the iTunes Store in order to prevent them from displaying on the Apple TV. Take a look at the article below for more information.
iTunes Store: Hiding and unhiding purchases
http://support.apple.com/kb/ht4919
-Griff W.

My friend's apple ID shows up when I want to update my Apps. How can I get rid of it and see my own instead?

On my iPhone I see my friend's Apple ID when I want to update my Apps and can't seem to login with my own. What's wrong? How can I get rid off my friend's ID and login with my own when I want to update or download apps? I went to Itunes Store in Setting and checked if my ID was still there, and it is so I have no idea what's wrong.

lol_maker wrote:
Just used her MacBook to unlock my iPhone as I was away from home. So she backuped my phone and restored it to allow the unlock to work. That's all.
I'm still not clear about what you mean about unlocking your phone. Normally, "unlocking" means entering the password if the phone is locked, which you should be able to do from the phone itself. If you want more help with this, you really need to take the time to furnish all the relevant details.
I have a MacBook Pro, and yes when I connect my iPhone on it it shows up in the devices list.
When you do that & click on the iPhone in the list, then click on the "Apps" tab at the top, do you see the apps you can't update listed there? If you click on the "Store" menu item does it show near the bottom that you are logged in with your own Apple ID?
As wjosten said, it sounds like one way or another, the apps you cannot update were obtained using your friend's Apple ID. You need to delete them from your phone & try buying them again. If they were in fact paid for with your own Apple ID you won't have to pay again; otherwise you will.

I can't get rid of 169 ip addresses on devices

Similar Messages

Maybe you are looking for